Non-domination et collectivités : l'apport du républicanisme à une théorie des droits collectifs

L'objectif poursuivi dans ce mémoire est de montrer que le néo-républicanisme possède les outils les plus efficaces pour penser la réconciliation des droits individuels, fondement des États de droits occidentaux contemporains, et des droits collectifs que peuvent légitimement réclamer les collectivités nationales. Dans cette visée, et comme de nombreux auteurs libéraux se sont attaqués à cette question dans les dernières décennies, j'expose d'abord trois stratégies libérales pour traiter cette possible réconciliation tout en faisant ressortir leurs faiblesses respectives. J'avance qu'aucune de ces stratégies ne permet vraiment de comprendre comment un régime de droits collectifs et un régime de droits individuels peuvent être articulés de façon cohérente. J'argue ensuite que le néo-républicanisme, parce qu'il comprend la liberté non pas comme l'absence d'interférence, mais comme un statut de non-domination, permet de voir que les droits collectifs des groupes nationaux et les droits individuels sont nécessairement compatibles, parce qu'ils s'organisent en fonction du même idéal. Les droits d'un individu et ceux de sa collectivité nationale sont, d'une certaine manière, les deux faces d'une même médaille, la non-domination individuelle dépendant de la non-domination du groupe national auquel l'individu appartient. En dernier lieu, je soutiens que cette compréhension du rapport entre les deux régimes de droits devrait se traduire par un ensemble de mesures institutionnelles concrètes dont la plus importante est la reconnaissance d'un droit, pour les collectivités nationales, à l'autodétermination.

Enhancing dominant modes in nonstationary time series by means of the symbolic resonance analysis

We present the symbolic resonance analysis (SRA) as a viable method for addressing the problem of enhancing a weakly dominant mode in a mixture of impulse responses obtained from a nonlinear dynamical system. We demonstrate this using results from a numerical simulation with Duffing oscillators in different domains of their parameter space, and by analyzing event-related brain potentials (ERPs) from a language processing experiment in German as a representative application. In this paradigm, the averaged ERPs exhibit an N400 followed by a sentence final negativity. Contemporary sentence processing models predict a late positivity (P600) as well. We show that the SRA is able to unveil the P600 evoked by the critical stimuli as a weakly dominant mode from the covering sentence final negativity. (c) 2007 American Institute of Physics. (c) 2007 American Institute of Physics.

The functions of Japanese Sound Symbolic Words in Different Types of Texts and Their Translation

Though sound symbolic words (onomatopoeia and mimetic words, or giongo and gitaigo in Japanese) exist in other languages, it would not be so easy to compare them to those in Japanese. This is because unlike in Japanese, in many other languages (here we see English and Spanish) sound symbolic words do not have distinctive forms that separate them immediately from the rest of categories of words. In Japanese, a sound symbolic word has a radical (that is based on the elaborated Japanese sound symbolic system), and often a suffix that shows subtle nuance. Together they give the word a distinctive form that differentiates it from other categories of words, though its grammatical functions could vary, especially in the case of mimetic words (gitaigo). Without such an obvious feature, in other languages, it would not be always easy to separate sound symbolic words from the rest. These expressions are extremely common and used in almost all types of text in Japanese, but their elaborated sound symbolic system and possibly their various grammatical functions are making giongo and gitaigo one of the most difficult challenges for the foreign students and translators. Studying the translation of these expressions into other languages might give some indication related to the comparison of Japanese sound symbolic words and those in other languages. Though sound symbolic words are present in many types of texts in Japanese, their functions in traditional forms of text (letters only) and manga (Japanese comics)are different and they should be treated separately. For example, in traditional types of text such as novels, the vast majority of the sound symbolic words used are mimetic words (gitaigo) and most of them are used as adverbs, whereas in manga, the majority of the sound symbolic words used (excluding those appear within the speech bubbles) are onomatopoeias (giongo) and often used on their own (i.e. not as a part of a sentence). Naturally, the techniques used to translate these expressions in the above two types of documents differ greatly. The presentation will focus on i) grammatical functions of Japanese sound symbolic words in traditional types of texts (novels/poems) and in manga works, and ii) whether their features and functions are maintained (i.e. whether they are translated as sound symbolic words) when translated into other languages (English and Spanish). The latter point should be related to a comparison of sound symbolic words in Japanese and other languages, which will be also discussed.

Impaired acuity of the approximate number system in 22q11.2 microdeletion syndrome

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Dynamic analysis of the motorcycle chattering behaviour by means of symbolic multibody modelling

Aim of this research is the development and validation of a comprehensive multibody motorcycle model featuring rigid-ring tires, taking into account both slope and roughness of road surfaces. A novel parametrization for the general kinematics of the motorcycle is proposed, using a mixed reference-point and relative-coordinates approach. The resulting description, developed in terms of dependent coordinates, makes it possible to efficiently include rigid-ring kinematics as well as road elevation and slope. The equations of motion for the multibody system are derived symbolically and the constraint equations arising from the dependent-coordinate formulation are handled using a projection technique. Therefore the resulting system of equations can be integrated in time domain using a standard ODE algorithm. The model is validated with respect to maneuvers experimentally measured on the race track, showing consistent results and excellent computational efficiency. More in detail, it is also capable of reproducing the chatter vibration of racing motorcycles. The chatter phenomenon, appearing during high speed cornering maneuvers, consists of a self-excited vertical oscillation of both the front and rear unsprung masses in the range of frequency between 17 and 22 Hz. A critical maneuver is numerically simulated, and a self-excited vibration appears, consistent with the experimentally measured chatter vibration. Finally, the driving mechanism for the self-excitation is highlighted and a physical interpretation is proposed.

Analysis of the introduction of a business process mapping system in Rosetti Marino spa

After a first theoric introduction about Business Process Re-engineering (BPR), are considered in particular the possible options found in literature regarding the following three macro-elements: the methodologies, the modelling notations and the tools employed for process mapping. The theoric section is the base for the analysis of the same elements into the specific case of Rosetti Marino S.p.A., an EPC contractor, operating in the Oil&Gas industry. Rosetti Marino implemented a tool developped internally in order to satisfy its needs in the most suitable way possible and buit a Map of all business processes,navigable on the Company Intranet. Moreover it adopted a methodology based upon participation, interfunctional communication and sharing. The GIGA introduction is analysed from a structural, human resources, political and symbolic point of view.

Soil conservation in Swiss agriculture - Approaching abstract and symbolic meanings in farmers' life-worlds

This paper explores the significance of ‘life-worlds’ for better understanding why farmers adopt or reject soil conservation measures and for identifying basic dimensions to be covered by social learning processes in Swiss agricultural soil protection. The study showed that farmers interpret soil erosion and soil conservation measures against the background of their entire life-world. By doing so, farmers consider abstract and symbolic meanings of soil conservation. This is, soil conservation measures have to be feasible and practical in the everyday farming routine, however, they also have to correspond with their aesthetic perception, their value system and their personal and professional identities. Consequently, by switching to soil conservation measures such as no-tillage farmers have to adapt not only the routines of their daily farming life, but also their perception of the aesthetics of cultivated land, underlying values and images of themselves. Major differences between farmers who adopt and farmers who reject no-tillage were found to depend on the degree of coherence they could create between the abstract and symbolic meanings of the soil conservation measure. From this perspective, implementation of soil protection measures faces the challenge of facilitating interactions between farmers, experts and scientists at a ‘deeper’ level, with an awareness of all significant dimensions that characterise the life-world. The paper argues that a certain level of shared symbolic meaning is essential to achieving mutual understanding in social learning processes.

A Multi-agent System for Emergency Decision Support

This paper describes the multi-agent organization of a computer system that was designed to assist operators in decision making in the presence of emergencies. The application was developed for the case of emergencies caused by river floods. It operates on real-time receiving data recorded by sensors (rainfall, water levels, flows, etc.) and applies multi-agent techniques to interpret the data, predict the future behavior and recommend control actions. The system includes an advanced knowledge based architecture with multiple symbolic representation with uncertainty models (bayesian networks). This system has been applied and validated at two particular sites in Spain (the Jucar basin and the South basin).

&ACE: A high-performance parallel prolog system

In recent years a lot of research has been invested in parallel processing of numerical applications. However, parallel processing of Symbolic and AI applications has received less attention. This paper presents a system for parallel symbolic computitig, narned ACE, based on the logic programming paradigm. ACE is a computational model for the full Prolog language, capable of exploiting Or-parall< lism and Independent And-parallelism. In this paper vve focus on the implementation of the and-parallel part of the ACE system (ralled &ACE) on a shared memory multiprocessor, d< scribing its organization, some optimizations, and presenting some performance figures, proving the abilhy of &ACE to efficiently exploit parallelism.

A new class of symbolic abstract neural nets

Starting from the way the inter-cellular communication takes place by means of protein channels and also from the standard knowledge about neuron functioning, we propose a computing model called a tissue P system, which processes symbols in a multiset rewriting sense, in a net of cells similar to a neural net. Each cell has a finite state memory, processes multisets of symbol-impulses, and can send impulses (?excitations?) to the neighboring cells. Such cell nets are shown to be rather powerful: they can simulate a Turing machine even when using a small number of cells, each of them having a small number of states. Moreover, in the case when each cell works in the maximal manner and it can excite all the cells to which it can send impulses, then one can easily solve the Hamiltonian Path Problem in linear time. A new characterization of the Parikh images of ET0L languages are also obtained in this framework.

Building a decision support system with a knowledge modeling tool

Knowledge modeling tools are software tools that follow a modeling approach to help developers in building a knowledge-based system. The purpose of this article is to show the advantages of using this type of tools in the development of complex knowledge-based decision support systems. In order to do so, the article describes the development of a system called SAIDA in the domain of hydrology with the help of the KSM modeling tool. SAIDA operates on real-time receiving data recorded by sensors (rainfall, water levels, flows, etc.). It follows a multi-agent architecture to interpret the data, predict the future behavior and recommend control actions. The system includes an advanced knowledge based architecture with multiple symbolic representation. KSM was especially useful to design and implement the complex knowledge based architecture in an efficient way.

An expert system on design of liquid-retaining structures with blackboard architecture

The design of liquid-retaining structures involves many decisions to be made by the designer based on rules of thumb, heuristics, judgement, codes of practice and previous experience. Structural design problems are often ill structured and there is a need to develop programming environments that can incorporate engineering judgement along with algorithmic tools. Recent developments in artificial intelligence have made it possible to develop an expert system that can provide expert advice to the user in the selection of design criteria and design parameters. This paper introduces the development of an expert system in the design of liquid-retaining structures using blackboard architecture. An expert system shell, Visual Rule Studio, is employed to facilitate the development of this prototype system. It is a coupled system combining symbolic processing with traditional numerical processing. The expert system developed is based on British Standards Code of Practice BS8007. Explanations are made to assist inexperienced designers or civil engineering students to learn how to design liquid-retaining structures effectively and sustainably in their design practices. The use of this expert system in disseminating heuristic knowledge and experience to practitioners and engineering students is discussed.

An expert system for the development of a health and safety policy/risk assessment in the plastics industry

Health and safety policies may be regarded as the cornerstone for positive prevention of occupational accidents and diseases. The Health and Safety at Work, etc Act 1974 makes it a legal duty for employers to prepare and revise a written statement of a general policy with respect to the health and safety at work of employees as well as the organisation and arrangements for carrying out that policy. Despite their importance and the legal equipment to prepare them, health and safety policies have been found, in a large number of plastics processing companies (particularly small companies), to be poorly prepared, inadequately implemented and monitored. An important cause of these inadequacies is the lack of necessary health and safety knowledge and expertise to prepare, implement and monitor policies. One possible way of remedying this problem is to investigate the feasibility of using computers to develop expert system programs to simulate the health and safety (HS) experts' task of preparing the policies and assisting companies implement and monitor them. Such programs use artificial intelligence (AI) techniques to solve this sort of problems which are heuristic in nature and require symbolic reasoning. Expert systems have been used successfully in a variety of fields such as medicine and engineering. An important phase in the feasibility of development of such systems is the engineering of knowledge which consists of identifying the knowledge required, eliciting, structuring and representing it in an appropriate computer programming language.

Expert system design for cold form sections

The concept of an Expert System (ES) has been acknowledged as a very useful tool, but few studies have been carried out in its application to the design of cold rolled sections. This study involves primarily the use of an ES as a tool to improve the design process and to capture the draughtsman's knowledge. Its main purpose is to reduce substantially the time taken to produce a section drawing, thereby facilitating a speedy feedback to the customer. In order to communicate with a draughtsman, it is necessary to use sketches, symbolic representations and numerical data. This increases the complexity of programming an ES, as it is necessary to use a combination of languages so that decisions, calculations, graphical drawings and control of the system can be effected. A production system approach is used and a further step has been taken by introducing an Activator which is an autoexecute operation set up by the ES to operate an external program automatically. To speed up the absorption of new knowledge into the knowledge base, a new Learning System has been constructed. In addition to developing the ES, other software has been written to assist the design process. The section properties software has been introduced to improve the speed and consistency of calculating the section properties. A method of selecting or comparing the most appropriate section for a given specification is also implemented. Simple loading facilities have been introduced to guide the designer as to the loading capacity of the section. This research has concluded that the application of an ES is beneficial and with the activator approach, automated designing can be achieved. On average a complex drawing can be displayed on the screen in about 100 seconds, where over 95% of the initial section design time for repetitive or similar profile can be saved.

The grip of personalization in adult social care:between managerial domination and fantasy

This paper examines the 'ideological grip' of personalization. It does so empirically, tracking the trajectory of personalization through austerity budgeting in one English local authority. In this case, personalization continued to signify hope and liberation even though the most draconian cuts in the Council's history effectively rendered personalization a practical impossibility. This requires critical theorization. Two bodies of theory are interrogated. First Boltanski's sociology of critique, and, in particular, his notion of managerial domination illuminate the way in which change imperatives and crises come to cement ideological formations. Here it is argued that the articulation of personalization with transformation lends itself to managerial domination. It is further argued, though, that while institutional actors may be able to manipulate the symbolic to evade, what Boltanski terms, deconstructionist critique, this cannot entirely explain the hold of this particular discourse. Here, the Lacanian concept of enjoyment is deployed to interrogate its extra-symbolic function and fantasmatic form. Finally, the paper explores the political implications of such affective attachment and, in particular, the guarantee that personalization offers in a period of welfare state decline. © The Author(s) 2012.