Regulation of Phytoplankton Carbon to Chlorophyll Ratio By Light, Nutrients and Temperature in the Equatorial Pacific Ocean: A Basin-Scale Model

The complex effects of light, nutrients and temperature lead to a variable carbon to chlorophyll (C:Chl) ratio in phytoplankton cells. Using field data collected in the Equatorial Pacific, we derived a new dynamic model with a non-steady C:Chl ratio as a function of irradiance, nitrate, iron, and temperature. The dynamic model is implemented into a basin-scale ocean circulation-biogeochemistry model and tested in the Equatorial Pacific Ocean. The model reproduces well the general features of phytoplankton dynamics in this region. For instance, the simulated deep chlorophyll maximum (DCM) is much deeper in the western warm pool (similar to 100 m) than in the Eastern Equatorial Pacific (similar to 50 m). The model also shows the ability to reproduce chlorophyll, including not only the zonal, meridional and vertical variations, but also the interannual variability. This modeling study demonstrates that combination of nitrate and iron regulates the spatial and temporal variations in the phytoplankton C:Chl ratio in the Equatorial Pacific. Sensitivity simulations suggest that nitrate is mainly responsible for the high C:Chl ratio in the western warm pool while iron is responsible for the frontal features in the C:Chl ratio between the warm pool and the upwelling region. In addition, iron plays a dominant role in regulating the spatial and temporal variations of the C:Chl ratio in the Central and Eastern Equatorial Pacific. While temperature has a relatively small effect on the C:Chl ratio, light is primarily responsible for the vertical decrease of phytoplankton C:Chl ratio in the euphotic zone.

Scale model research for room acoustics purposes

In the field of Room Acoustics it is common using scale models to study a room. Through this method it is possible to predict its behavior, which may be very useful to detect and correct any problem prior to build it, saving many resources. Nowadays this method has been relegated to a secondary position due to the peak of simulation software, which makes possible studying rooms in a cheap, flexible and simple way, as well as it is potentially less time consuming. Nevertheless, the scale model method is still under study, as it may give some additional information. This project intends to focus in pedagogic possibilities of the scale model method. This method offers the student the opportunity of study and grasp some of the most important phenomena in Room Acoustics, in a more intuitive way than just a software simulation. Furthermore most of the existing software in this field is aimed to the technician working in the lab, as efficiently as possible, not to the student trying to understand and learn something. Here, the facilities and resources of Syddansk Universitet regarding this matter will be studied and evaluated, as well as the procedure for the experiments, paying special attention not only to its reliability and accuracy, but also to its didactic possibilities. Besides, if possible, any improvement that could help to enhance any of the listed aspects will be suggested. En el ámbito de la Acústica Arquitectónica es común el uso de modelos a escala para estudiar un recinto determinado. Mediante esta técnica es posible por ejemplo predecir el comportamiento del recinto y detectar problemas antes de su construcción, con el consecuente ahorro de recursos. Actualmente el uso de modelos a escala está desplazado a un segundo plano por el uso de software simulación, debido a la sencillez y flexibilidad que puede aportar la simulación por ordenador, así como a la economía de tiempo y recursos que supone. Sin embargo sigue siendo objeto de estudio, dado que puede aportar información muy valiosa para el ingeniero. Este proyecto se centra en las posibilidades pedagógicas de dicho método. El uso de modelos a escala brinda la oportunidad a los estudiantes de estudiar y comprender algunos de los fenómenos más importantes en la Acústica Arquitectónica de una forma más directa e intuitiva que una simulación por ordenador. Se pretende estudiar y evaluar los medios al alcance de los estudiantes en la Syddansk Universitet, así como los métodos usados, atendiendo no sólo a su precisión y fiabilidad, si no a su potencial pedagógico. Así mismo, si es posible, se propondrán cambios que puedan suponer una mejora en cualquiera de estos aspectos. Así el proyecto se divide en varias secciones claramente diferenciadas. En el apartado Background and Theoretical Basis se introduce el tema del estudio y simulación de recintos acústicos. Se explica su importancia y utilidad, y se comenta la situación actual de estas técnicas, abordando diferentes métodos usados así como sus bases teóricas y principales ventajas e inconvenientes. Bajo el apartado de Project se analizan diferentes factores relacionados con el problema. Se estudian los recursos a disposición del alumno, desde el software y hardware implicados hasta el equipo de medida y otros recursos necesarios para la realización de las prácticas. Es en esta parte donde se centra la parte más importante del trabajo, consistente en la medición y comprobación de las características más relevantes del equipo implicado. Haciendo posible así confirmar su validez y precisión, tanto desde el punto de vista técnico como pedagógico, así como estableciendo los límites dentro de los que se puede considerar fiable el modelo. Al final de este apartado se aborda la influencia de la absorción del aire en altas frecuencias, y la variación en los coeficientes de absorción y dispersión de los materiales respecto de la frecuencia. Por último se realiza una verificación subjetiva del sistema completo, debido a que por limitaciones técnicas no ha sido posible evaluar el montaje en el rango equivalente a toda la banda audible, y que los métodos estudiados tienen como meta última asegurar una buena percepción por parte del oyente en el recinto dado. Dentro del apartado Conclusions se hace un breve resumen de las conclusiones extraídas anteriormente, y se valora el rendimiento y utilidad general del modelo, que a pesar de algunos problemas de precisión y repetibilidad lógicos debido a los medios usados, es válido para ilustrar los fenómenos físicos que se quieren enseñar al alumno. En la sección de Future Work se proponen diferentes vías de trabajo para futuros proyectos en la Syddansk Universitet que podrían ser útiles confirmar el trabajo realizado en este proyecto, mejorar la precisión y fiabilidad del montaje o enriquecer las posibilidades pedagógicas de las prácticas relacionadas. Por último se encuentra, tras el apartado de referencias, los anexos con tablas y gráficas relativas a las medidas realizadas en diferentes partes del trabajo. También se puede encontrar información y material relacionado con el proyecto en el CD adjunto.

Scale model study of low-density concrete impact attenuators. Final report.

Ohio Department of Transportation, Columbus

Development of a streaming-fiber oil spill control system : stage II : modifications to large-scale model /

Includes bibliographical references.

A production plan for the scale model aircraft project.

Mode of access: Internet.

Base heating investigations on a 1/10 scale model Centaur stage using short-duration high altitude testing techniques. Contract no. NAS 3-3227.

Mode of access: Internet.

Tests on a quarter scale model of a multiple-panel reinforced concrete flat plate floor /

Mode of access: Internet.

Performance of 1/3-scale model precast concrete beam-column connections subjected to cyclic inelastic loads : report no. 4 /

Mode of access: Internet.

A simple regional-scale model for forecasting sorghum yield across North-Eastern Australia

Sorghum is the main dryland summer crop in NE Australia and a number of agricultural businesses would benefit from an ability to forecast production likelihood at regional scale. In this study we sought to develop a simple agro-climatic modelling approach for predicting shire (statistical local area) sorghum yield. Actual shire yield data, available for the period 1983-1997 from the Australian Bureau of Statistics, were used to train the model. Shire yield was related to a water stress index (SI) that was derived from the agro-climatic model. The model involved a simple fallow and crop water balance that was driven by climate data available at recording stations within each shire. Parameters defining the soil water holding capacity, maximum number of sowings (MXNS) in any year, planting rainfall requirement, and critical period for stress during the crop cycle were optimised as part of the model fitting procedure. Cross-validated correlations (CVR) ranged from 0.5 to 0.9 at shire scale. When aggregated to regional and national scales, 78-84% of the annual variation in sorghum yield was explained. The model was used to examine trends in sorghum productivity and the approach to using it in an operational forecasting system was outlined. (c) 2005 Elsevier B.V. All rights reserved.

Response normalization and blur adaptation:data and multi-scale model

Adapting to blurred or sharpened images alters perceived blur of a focused image (M. A. Webster, M. A. Georgeson, & S. M. Webster, 2002). We asked whether blur adaptation results in (a) renormalization of perceived focus or (b) a repulsion aftereffect. Images were checkerboards or 2-D Gaussian noise, whose amplitude spectra had (log-log) slopes from -2 (strongly blurred) to 0 (strongly sharpened). Observers adjusted the spectral slope of a comparison image to match different test slopes after adaptation to blurred or sharpened images. Results did not show repulsion effects but were consistent with some renormalization. Test blur levels at and near a blurred or sharpened adaptation level were matched by more focused slopes (closer to 1/f) but with little or no change in appearance after adaptation to focused (1/f) images. A model of contrast adaptation and blur coding by multiple-scale spatial filters predicts these blur aftereffects and those of Webster et al. (2002). A key proposal is that observers are pre-adapted to natural spectra, and blurred or sharpened spectra induce changes in the state of adaptation. The model illustrates how norms might be encoded and recalibrated in the visual system even when they are represented only implicitly by the distribution of responses across multiple channels.

Examining the use of Simarouba glauca Seed Oil as a Feedstock for the Production of Biodiesel using a Small Scale Model Developed in India

Simarouba glauca, a non-edible oilseed crop native to South Florida, is gaining popularity as a feedstock for the production of biodiesel. The University of Agriculture Sciences in Bangalore, India has developed a biodiesel production model based on the principles of decentralization, small scales, and multiple fuel sources. Success of such a program depends on conversion efficiencies at multiple stages. The conversion efficiency of the field-level, decentralized production model was compared with the in-laboratory conversion efficiency benchmark. The study indicated that the field-level model conversion efficiency was less than that of the lab-scale set up. The fuel qualities and characteristics of the Simarouba glauca biodiesel were tested and found to be the standards required for fuel designation. However, this research suggests that for Simarouba glauca to be widely accepted as a biodiesel feedstock further investigation is still required.

Prediction of particle distribution in isotropic turbulence by large-eddy simulation

The recent application of large-eddy simulation (LES) to particle-laden turbulence requires that the LES with a subgrid scale (SGS) model could accurately predict particle distributions. Usually, a SGS particle model is used to recover the small-scale structures of velocity fields. In this study, we propose a rescaling technique to recover the effects of small-scale motions on the preferential concentration of inertial particles. The technique is used to simulate particle distribution in isotropic turbulence by LES and produce consistent results with direct numerical simulation (DNS). Key words: particle distribution, particle-laden turbulence, large-eddy simulation, subgrid scale model.

Large-eddy simulations of fully developed turbulent channel and pipe flows with smooth and rough walls

Studies in turbulence often focus on two flow conditions, both of which occur frequently in real-world flows and are sought-after for their value in advancing turbulence theory. These are the high Reynolds number regime and the effect of wall surface roughness. In this dissertation, a Large-Eddy Simulation (LES) recreates both conditions over a wide range of Reynolds numbers Re_τ = O(10²)-O(10⁸) and accounts for roughness by locally modeling the statistical effects of near-wall anisotropic fine scales in a thin layer immediately above the rough surface. A subgrid, roughness-corrected wall model is introduced to dynamically transmit this modeled information from the wall to the outer LES, which uses a stretched-vortex subgrid-scale model operating in the bulk of the flow. Of primary interest is the Reynolds number and roughness dependence of these flows in terms of first and second order statistics. The LES is first applied to a fully turbulent uniformly-smooth/rough channel flow to capture the flow dynamics over smooth, transitionally rough and fully rough regimes. Results include a Moody-like diagram for the wall averaged friction factor, believed to be the first of its kind obtained from LES. Confirmation is found for experimentally observed logarithmic behavior in the normalized stream-wise turbulent intensities. Tight logarithmic collapse, scaled on the wall friction velocity, is found for smooth-wall flows when Re_τ ≥ O(10⁶) and in fully rough cases. Since the wall model operates locally and dynamically, the framework is used to investigate non-uniform roughness distribution cases in a channel, where the flow adjustments to sudden surface changes are investigated. Recovery of mean quantities and turbulent statistics after transitions are discussed qualitatively and quantitatively at various roughness and Reynolds number levels. The internal boundary layer, which is defined as the border between the flow affected by the new surface condition and the unaffected part, is computed, and a collapse of the profiles on a length scale containing the logarithm of friction Reynolds number is presented. Finally, we turn to the possibility of expanding the present framework to accommodate more general geometries. As a first step, the whole LES framework is modified for use in the curvilinear geometry of a fully-developed turbulent pipe flow, with implementation carried out in a spectral element solver capable of handling complex wall profiles. The friction factors have shown favorable agreement with the superpipe data, and the LES estimates of the Karman constant and additive constant of the log-law closely match values obtained from experiment.