Workplace Aggression: A Reconceptualization of The Construct & an Exploration of Strain Based Outcomes

The examination of Workplace Aggression as a global construct conceptualization has gained considerable attention over the past few years as organizations work to better understand and address the occurrence and consequences of this challenging construct. The purpose of this dissertation is to build on previous efforts to validate the appropriateness and usefulness of a global conceptualization of the workplace aggression construct. This dissertation has been broken up into two parts: Part 1 utilized a Confirmatory Factor Analysis approach in order to assess the existence of workplace aggression as a global construct; Part 2 utilized a series of correlational analyses to examine the relationship between a selection of commonly experienced individual strain based outcomes and the global construct conceptualization assessed in Part 1. Participants were a diverse sample of 219 working individuals from Amazon’s Mechanical Turk participant pool. Results of Part 1 did not show support for a one-factor global construct conceptualization of the workplace aggression construct. However, support was shown for a higher-order five-factor model of the construct, suggesting that it may be possible to conceptualize workplace aggression as an overarching construct that is made up of separate workplace aggression constructs. Results of Part 2 showed support for the relationships between an existing global construct workplace aggression conceptualization and a series of strain-based outcomes. Utilizing correlational analyses, additional post-hoc analyses showed that individual factors such as emotional intelligence and personality are related to the experience of workplace aggression. Further, utilizing moderated regression analysis, the results demonstrated that individuals experiencing high levels of workplace aggression reported higher job satisfaction when they felt strongly that the aggressive act was highly visible, and similarly, when they felt that there was a clear intent to cause harm. Overall, the findings of this dissertation do support the need for a simplification of its current state of measurement. Future research should continue to examine workplace aggression in an effort to shed additional light on the structure and usefulness of this complex construct.

Work stress, smoking status and smoking intensity: an observational study of 46 190 employees

Study objective: To examine the relationship between work stress, as indicated by the job strain model and the effort-reward imbalance model, and smoking. Setting: Ten municipalities and 21 hospitals in Finland. Design and Participants: Binary logistic regression models for the prevalence of smoking were related to survey responses of 37 309 female and 8881 male Finnish public sector employees aged 17-65. Separate multinomial logistic regression models were calculated for smoking intensity for 8130 smokers. In addition, binary logistic regression models for ex-smoking were fitted among 16 277 former and current smokers. In all analyses, adjustments were made for age, basic education, occupational status, type of employment and marital status. Main results: Respondents with high effort-reward imbalance or lower rewards were more likely to be smokers. Among smokers, an increased likelihood of higher intensity of smoking was associated with higher job strain and higher effort-reward imbalance and their components such as low job control and low rewards. Smoking intensity was also higher in active jobs in women, in passive jobs and among employees with low effort expenditure. Among former and current smokers, high job strain, high effort-reward imbalance and high job demands were associated with a higher likelihood of being a current smoker. Lower effort was associated with a higher likelihood of ex-smoking. Conclusions: This evidence suggests an association between work stress and smoking and implies that smoking cessation programs may benefit from the taking into account the modification of stressful features of work environment. Key words: effort-reward imbalance; job strain; smoking. Abbreviations: OR, odds ratio; CI, confidence interval; SES, socioeconomic status

A positional FEM Formulation for geometrical non-linear analysis of shells

This work presents a fully non-linear finite element formulation for shell analysis comprising linear strain variation along the thickness of the shell and geometrically exact description for curved triangular elements. The developed formulation assumes positions and generalized unconstrained vectors as the variables of the problem, not displacements and finite rotations. The full 3D Saint-Venant-Kirchhoff constitutive relation is adopted and, to avoid locking, the rate of thickness variation enhancement is introduced. As a consequence, the second Piola-Kirchhoff stress tensor and the Green strain measure are employed to derive the specific strain energy potential. Curved triangular elements with cubic approximation are adopted using simple notation. Selected numerical simulations illustrate and confirm the objectivity, accuracy, path independence and applicability of the proposed technique.

Root Water Extraction under Combined Water and Osmotic Stress

Using a numerical implicit model for root water extraction by a single root in a symmetric radial flow problem, based on the Richards equation and the combined convection-dispersion equation, we investigated some aspects of the response of root water uptake to combined water and osmotic stress. The model implicitly incorporates the effect of simultaneous pressure head and osmotic head on root water uptake, and does not require additional assumptions (additive or multiplicative) to derive the combined effect of water and salt stress. Simulation results showed that relative transpiration equals relative matric flux potential, which is defined as the matric flux potential calculated with an osmotic pressure head-dependent lower bound of integration, divided by the matric flux potential at the onset of limiting hydraulic conditions. In the falling rate phase, the osmotic head near the root surface was shown to increase in time due to decreasing root water extraction rates, causing a more gradual decline of relative transpiration than with water stress alone. Results furthermore show that osmotic stress effects on uptake depend on pressure head or water content, allowing a refinement of the approach in which fixed reduction factors based on the electrical conductivity of the saturated soil solution extract are used. One of the consequences is that osmotic stress is predicted to occur in situations not predicted by the saturation extract analysis approach. It is also shown that this way of combining salinity and water as stressors yields results that are different from a purely multiplicative approach. An analytical steady state solution is presented to calculate the solute content at the root surface, and compared with the outputs of the numerical model. Using the analytical solution, a method has been developed to estimate relative transpiration as a function of system parameters, which are often already used in vadose zone models: potential transpiration rate, root length density, minimum root surface pressure head, and soil theta-h and K-h functions.

Evolution of stress deficit and changing rates of seismicity in cellular automaton models of earthquake faults

We investigate the internal dynamics of two cellular automaton models with heterogeneous strength fields and differing nearest neighbour laws. One model is a crack-like automaton, transferring ail stress from a rupture zone to the surroundings. The other automaton is a partial stress drop automaton, transferring only a fraction of the stress within a rupture zone to the surroundings. To study evolution of stress, the mean spectral density. f(k(r)) of a stress deficit held is: examined prior to, and immediately following ruptures in both models. Both models display a power-law relationship between f(k(r)) and spatial wavenumber (k(r)) of the form f(k(r)) similar tok(r)(-beta). In the crack model, the evolution of stress deficit is consistent with cyclic approach to, and retreat from a critical state in which large events occur. The approach to criticality is driven by tectonic loading. Short-range stress transfer in the model does not affect the approach to criticality of broad regions in the model. The evolution of stress deficit in the partial stress drop model is consistent with small fluctuations about a mean state of high stress, behaviour indicative of a self-organised critical system. Despite statistics similar to natural earthquakes these simplified models lack a physical basis. physically motivated models of earthquakes also display dynamical complexity similar to that of a critical point system. Studies of dynamical complexity in physical models of earthquakes may lead to advancement towards a physical theory for earthquakes.

Repeated stress reduces mucociliary clearance in animals with chronic allergic airway inflammation

We evaluated if repeated stress modulates mucociliary clearance and inflammatory responses in airways of guinea pigs (GP) with chronic inflammation. The GP received seven exposures of ovalbumin or saline 0.9%. After 4th inhalation, animals were submitted to repeated forced swim stressor protocol (5x/week/2 weeks). After 7th inhalation, GP were anesthetized. We measured transepithelial potential difference, ciliary beat frequency, mucociliary transport, contact angle, cough transportability and serum cortisol levels. Lungs and adrenals were removed, weighed and analyzed by morphometry. Ovalbumin-exposed animals submitted to repeated stress had a reduction in mucociliary transport, and an increase on serum cortisol, adrenals weight, mucus wettability and adhesivity, positive acid mucus area and IL-4 positive cells in airway compared to non-stressed ovalbumin-exposed animals (p < 0.05). There were no effects on eosinophilic recruitment and IL-13 positive cells. Repeated stress reduces mucociliary clearance due to mucus theological-property alterations, increasing acid mucus and its wettability and adhesivity. These effects seem to be associated with IL-4 activation. (C) 2010 Elsevier B.V. All rights reserved.

Effect of cantilever length and framework alloy on the stress distribution of mandibular-cantilevered implant-supported prostheses

The purpose of this in vitro study was to analyze the stress distribution on components of a mandibular-cantilevered implant-supported prosthesis with frameworks cast in cobalt-chromium (Co-Cr) or palladium-silver (Pd-Ag) alloys, according to the cantilever length. Frameworks were fabricated on (Co-Cr) and (Pd-Ag) alloys and screwed into standard abutments positioned on a master-cast containing five implant replicas. Two linear strain gauges were fixed on the mesial and distal aspects of each abutment to capture deformation. A vertical static load of 100 N was applied to the cantilever arm at the distances of 10, 15, and 20 mm from the center of the distal abutment and the absolute values of specific deformation were recorded. Different patterns of abutment deformation were observed according to the framework alloy. The Co-Cr alloy framework resulted in higher levels of abutment deformation than the silver-palladium alloy framework. Abutment deformation was higher with longer cantilever extensions. Physical properties of the alloys used for framework interfere with abutment deformations patterns. Excessively long cantilever extensions must be avoided. To cite this article:Jacques LB, Moura MS, Suedam V, Souza EAC, Rubo JH. Effect of cantilever length and framework alloy on the stress distribution of mandibular-cantilevered implant-supported prostheses.Clin. Oral Impl. Res. 20, 2009; 737-741.doi: 10.1111/j.1600-0501.2009.01712.x.

Short communication: Extended shifts in ambulance work: influences on health

Shiftwork is a major source of stress for many worker's. This study highlights the role that organizational and psychosocial variables play in alleviating the negative health effects of 10 and 14-h shifts. It examines the direct and mediated effects of coping strategies, social support and control of shifts on work/non-work conflict and subjective health. Participants are 60 ambulance workers, aged 22 to SS years. A structural equation model with good fit demonstrates complex effects of social support from various sources (supervisors, co-workers and family), coping and control on work/non-work conflict and subjective health., Conceptually, the research contributes to the development of a theoretical framework that can assist in explaining how key psychosocial and organizational variables influence the psychological and physical symptoms experienced by shiftworkers. Copyright (C) 2002 John Wiley Sons, Ltd.

Predicting the mechanical behavior of amorphous polymeric materials under strain through multi-scale simulation

Polymeric materials have become the reference material for high reliability and performance applications. However, their performance in service conditions is difficult to predict, due in large part to their inherent complex morphology, which leads to non-linear and anisotropic behavior, highly dependent on the thermomechanical environment under which it is processed. In this work, a multiscale approach is proposed to investigate the mechanical properties of polymeric-based material under strain. To achieve a better understanding of phenomena occurring at the smaller scales, the coupling of a finite element method (FEM) and molecular dynamics (MD) modeling, in an iterative procedure, was employed, enabling the prediction of the macroscopic constitutive response. As the mechanical response can be related to the local microstructure, which in turn depends on the nano-scale structure, this multiscale approach computes the stress-strain relationship at every analysis point of the macro-structure by detailed modeling of the underlying micro- and meso-scale deformation phenomena. The proposed multiscale approach can enable prediction of properties at the macroscale while taking into consideration phenomena that occur at the mesoscale, thus offering an increased potential accuracy compared to traditional methods.

Towards "green" smart materials for force and strain sensors: The case of polyaniline

Stress/strain sensors constitute a class of devices with a global ever-growing market thanks to their use in many fields of modern life. They are typically constituted by thin metal foils deposited on flexible supports. However, the low inherent resistivity and limited flexibility of their constituents make them inadequate for several applications, such as measuring large movements in robotic systems and biological tissues. As an alternative to the traditional compounds, in the present work we will show the advantages to employ a smart material, polyaniline (PANI), prepared by an innovative environmentally friendly route, for force/strain sensor applications wherein simple processing, environmental friendliness and sensitivity are particularly required.

Nonlinear behavior of gelatin networks reveals a hierarchical structure

We investigate the strain hardening behavior of various gelatin networks-namely physical gelatin gel, chemically cross-linked gelatin gel, and a hybrid gel made of a combination of the former two-under large shear deformations using the pre-stress, strain ramp, and large amplitude oscillations shear protocols. Further, the internal structures of physical gelatin gels and chemically cross-linked gelatin gels were characterized by small angle neutron scattering (SANS) to enable their internal structures to be correlated with their nonlinear rheology. The Kratky plots of SANS data demonstrate the presence of small cross-linked aggregates within the chemically cross-linked network whereas, in the physical gelatin gels, a relatively homogeneous structure is observed. Through model fitting to the scattering data, we were able to obtain structural parameters, such as the correlation length (ξ), the cross-sectional polymer chain radius (Rc) and the fractal dimension (df) of the gel networks. The fractal dimension df obtained from the SANS data of the physical and chemically cross-linked gels is 1.31 and 1.53, respectively. These values are in excellent agreement with the ones obtained from a generalized nonlinear elastic theory that has been used to fit the stress-strain curves. The chemical cross-linking that generates coils and aggregates hinders the free stretching of the triple helix bundles in the physical gels.

Retroanálise de parâmetros geomecânicos baseada em algoritmos de otimização

Dissertação de mestrado integrado em Engenharia Civil

In vitro growth of human urinary tract smooth muscle cells on laminin and collagen type I-coated membranes under static and dynamic conditions.

This study investigates in vitro growth of human urinary tract smooth muscle cells under static conditions and mechanical stimulation. The cells were cultured on collagen type I- and laminin-coated silicon membranes. Using a Flexcell device for mechanical stimulation, a cyclic strain of 0-20% was applied in a strain-stress-time model (stretch, 104 min relaxation, 15 s), imitating physiological bladder filling and voiding. Cell proliferation and alpha-actin, calponin, and caldesmon phenotype marker expression were analyzed. Nonstretched cells showed significant better growth on laminin during the first 8 days, thereafter becoming comparable to cells grown on collagen type I. Cyclic strain significantly reduced cell growth on both surfaces; however, better growth was observed on laminin. Neither the type of surface nor mechanical stimulation influenced the expression pattern of phenotype markers; alpha-actin was predominantly expressed. Coating with the extracellular matrix protein laminin improved in vitro growth of human urinary tract smooth muscle cells.

The renin-angiotensin system and arterial wall behavior.

To assess the behavior of the arterial wall in hypertensive patients, we developed a noninvasive ultrasonic device. Simultaneous recordings of internal diameter and blood pressure over the whole cardiac cycle are used to establish compliance-pressure curves. Blood pressure, which is a co-determinant of compliance, is thus taken into account. This method allows one to compare arteries from patients with different blood pressures. Arterial compliance and distensibility were first investigated in healthy young volunteers administered either lisinopril (20 mg), atenolol (100 mg) or nitrendipine (20 mg) once a day. After 8 days of treatment, only lisinopril was found to increase arterial compliance. Subsequently, we compared arterial diameter- and distensibility-pressure curves from newly diagnosed and untreated hypertensive patients with those of matched normotensive control patients. Diameter-pressure curves did not differ significantly between the groups and distensibility was not reduced. Similar findings were later obtained in an animal model, when mechanical properties of carotid arteries were compared between spontaneously hypertensive rats and normotensive counterparts (Wistar-Kyoto rats). These results, although interesting by providing noninvasive information on the elastic response of the wall, call for further development of the technique to be able to measure arterial wall thickness. Stress-strain relationship could ultimately be established to thoroughly characterize physical properties of blood vessel walls.

Biomechanical wall properties of human intracranial aneurysms resected following surgical clipping (IRRAs Project)

Background and purpose: Individual rupture risk assessment of intracranial aneurysms is a major issue in the clinical management of asymptomatic aneurysms. Aneurysm rupture occurs when wall tension exceeds the strength limit of the wall tissue. At present, aneurysmal wall mechanics are poorly understood and thus, risk assessment involving mechanical properties is inexistent. Aneurysm computational hemodynamics studies make the assumption of rigid walls, an arguable simplification. We therefore aim to assess mechanical properties of ruptured and unruptured intracranial aneurysms in order to provide the foundation for future patient-specific aneurysmal risk assessment. This work also challenges some of the currently held hypotheses in computational flow hemodynamics research. Methods: A specific conservation protocol was applied to aneurysmal tissues following clipping and resection in order to preserve their mechanical properties. Sixteen intracranial aneurysms (11 female, 5 male) underwent mechanical uniaxial stress tests under physiological conditions, temperature, and saline isotonic solution. These represented 11 unruptured and 5 ruptured aneurysms. Stress/strain curves were then obtained for each sample, and a fitting algorithm was applied following a 3-parameter (C(10), C(01), C(11)) Mooney-Rivlin hyperelastic model. Each aneurysm was classified according to its biomechanical properties and (un)rupture status.Results: Tissue testing demonstrated three main tissue classes: Soft, Rigid, and Intermediate. All unruptured aneurysms presented a more Rigid tissue than ruptured or pre-ruptured aneurysms within each gender subgroup. Wall thickness was not correlated to aneurysmal status (ruptured/unruptured). An Intermediate subgroup of unruptured aneurysms with softer tissue characteristic was identified and correlated with multiple documented risk factors of rupture. Conclusion: There is a significant modification in biomechanical properties between ruptured aneurysm, presenting a soft tissue and unruptured aneurysms, presenting a rigid material. This finding strongly supports the idea that a biomechanical risk factor based assessment should be utilized in the to improve the therapeutic decision making.