Comparison of fundus autofluorescence between fundus camera (Topcon) and confocal scanning laser ophthalmoscope (HRA) in various pathologies

Purpose: To investigate the differences between Fundus Camera (Topcon TRC-50X) and Confocal Scanning Laser Ophthalmoscope (Heidelberg retina angiogram (HRA)) on the fundus autofluorescence (FAF) imaging (resolution and FAF characteristics). Methods: 105 eyes of 56 patients with various retinal diseases underwent FAF imaging with HRA (488nm exciter/500nm barrier filter) before fluorescein angiography (FFA) and Topcon Fundus Camera (580nm exciter/695nm barrier filter) before and after FFA. The quality of the FAF images was compared for their resolution and analysed for the influence of fixation stability and cataracts. Hypo-and hyper-FAF behaviour was analysed for the healthy disc, healthy fovea, and a variety of pathological features. Results: HRA images were found to be of superior resolution in 18, while Topcon images were estimated superior in 29 eyes. No difference was found in 58 eyes. Both poor fixation (p=0.009) and more advanced cataract (p=0.013) were found associated with better image quality by Topcon. Images acquired by Topcon before and after FFA were identical (100%). The healthy disc was usually dark on HRA (72%), but showed mild autofluorescence on Topcon (85%). The healthy fovea showed in 100% Hypo-FAF on HRA, while Topcon showed in 53% Iso-FAF, in 43% mild Hypo-FAF, and in 4% Hypo-FAF as on HRA. No difference of FAF was found for geographic atrophy, pigment changes, and drusen, although Topcon images were often more detailed. Hyper-FAF due to serous exudation showed better on HRA. Cystic edema was visible only on HRA in a petaloid hyper-FAF pattern in 83%, while only two eyes (17%) showed similar behavior in both HRA- and Topcon images. Hard exudates caused Hypo-FAF only on HRA, hardly visible on Topcon. Blockage phenomenon by blood however was identical. Conclusions: The filter set of Topcon and the single image acquisition appear to be an advantage for patients with cataract and poor fixation respectively. Preceding FFA does not alter the Topcon FAF image. Regarding the FAF behavior, there are differences between the 2 systems which need to be taken into account when interpreting the images.

Evaluating the Effectiveness of Red Light Running Camera Enforcement in Cedar Rapids and Developing Guidelines For Selection and use of Red Light Running Countermeasures, Midwest Transportation Consortium, Final Report November 2011.

Red light running (RLR) is a problem in the US that has resulted in 165,000 injuries and 907 fatalities annually. In Iowa, RLR-related crashes make up 24.5 percent of all crashes and account for 31.7 percent of fatal and major injury crashes at signalized intersections. RLR crashes are a safety concern due to the increased likelihood of injury compared to other types of crashes. One tool used to combat red light running is automated enforcement in the form of RLR cameras. Automated enforcement, while effective, is often controversial. Cedar Rapids, Iowa installed RLR and speeding cameras at seven intersections across the city. The intersections were chosen based on crash rates and whether cameras could feasibly be placed at the intersection approaches. The cameras were placed starting in February 2010 with the last one becoming operational in December 2010. An analysis of the effect of the cameras on safety at these intersections was determined prudent in helping to justify the installation and effectiveness of the cameras. The objective of this research was to assess the safety effectiveness of the RLR program that has been implemented in Cedar Rapids. This was accomplished by analyzing data to determine changes in the following metrics:  Reductions in red light violation rates based on overall changes, time of day changes, and changes by lane  Effectiveness of the cameras over time  Time in which those running the red light enter the intersection  Changes in the average headway between vehicles entering the intersection

Evaluating the Effectiveness of Red Light Running Camera Enforcement in Cedar Rapids and Developing Guidelines for Selection and Use of Red Light Running Countermeasures Final Report, November 2011

Red light running (RLR) is a problem in the US that has resulted in 165,000 injuries and 907 fatalities annually. In Iowa, RLR-related crashes make up 24.5 percent of all crashes and account for 31.7 percent of fatal and major injury crashes at signalized intersections. RLR crashes are a safety concern due to the increased likelihood of injury compared to other types of crashes. One tool used to combat red light running is automated enforcement in the form of RLR cameras. Automated enforcement, while effective, is often controversial. Cedar Rapids, Iowa installed RLR and speeding cameras at seven intersections across the city. The intersections were chosen based on crash rates and whether cameras could feasibly be placed at the intersection approaches. The cameras were placed starting in February 2010 with the last one becoming operational in December 2010. An analysis of the effect of the cameras on safety at these intersections was determined prudent in helping to justify the installation and effectiveness of the cameras. The objective of this research was to assess the safety effectiveness of the RLR program that has been implemented in Cedar Rapids. This was accomplished by analyzing data to determine changes in the following metrics:  Reductions in red light violation rates based on overall changes, time of day changes, and changes by lane  Effectiveness of the cameras over time  Time in which those running the red light enter the intersection  Changes in the average headway between vehicles entering the intersection

Effect of Video Camera-Based Remote Roadway Condition Monitoring on Snow Removal-Related Maintenance Operations. 2014

Remote monitoring through the use of cameras is widely utilized for traffic operation, but has not been utilized widely for roadway maintenance operations. The Utah Department of Transportation (UDOT) has implemented a new remote monitoring system, referred to as a Cloud-enabled Remote Video Streaming (CRVS) camera system for snow removal-related maintenance operations in the winter. The purpose of this study was to evaluate the effectiveness of the use of the CRVS camera system in snow removal-related maintenance operations. This study was conducted in two parts: opinion surveys of maintenance station supervisors and an analysis on snow removal-related maintenance costs. The responses to the opinion surveys mostly displayed positive reviews of the use of the CRVS cameras. On a scale of 1 (least effective) to 5 (most effective), the average overall effectiveness given by the station supervisors was 4.3. An expedition trip for this study was defined as a trip that was made to just check the roadways if snow-removal was necessary. The average of the responses received from surveys was calculated to be a 33 percent reduction in expedition trips. For the second part of this study, an analysis was performed on the snow removal-related maintenance cost data provided by UDOT to see if the installation of a CRVS camera had an effect in reducing expedition trips. This expedition cost comparison was performed for 10 sets of maintenance stations within Utah. It was difficult to make any definitive inferences from the comparison of expedition costs over the years for which precipitation and expedition cost data were available; hence a statistical analysis was performed using the Mixed Model ANOVA. This analysis resulted in an average of 14 percent higher ratio of expedition costs at maintenance stations with a CRVS camera before the installation of the camera compared to the ratio of expedition costs after the installation of the camera. This difference was not proven to be statistically significant at the 95 percent confident level, but indicated that the installation of CRVS cameras was on the average helpful in reducing expedition costs and may be considered practically significant. It is recommended that more detailed and consistent maintenance cost records be prepared for accurate analysis of cost records for this type of study in the future.

Comparison of Fundus Autofluorescence Between Fundus Camera (Topcon) and Confocal Scanning Laser Ophthalmoscope (HRA) in Various Pathologies

Purpose: To investigate the differences between the Fundus Camera (Topcon TRC-50X) and Confocal Scanning Laser Ophthalmoscope (Heidelberg retina angiogram (HRA)) on the fundus autofluorescence (FAF) imaging (resolution and FAF characteristics). Methods: Eighty nine eyes of 46 patients with various retinal diseases underwent FAF imaging with HRA (488nm exciter / 500nm barrier filter) before fluorescein angiography (FFA) and Topcon Fundus Camera (580nm exciter / 695nm barrier filter) before and after FFA. The quality of the FAF images was estimated, compared for their resolution and analysed for the influence of fixation stability and cataracts. Hypo- and hyper-FAF behaviour was analysed for the healthy disc, healthy fovea, and a variety of pathological features. Results: HRA images were found to be of superior quality in 18 eyes, while Topcon images were estimated superior in 21 eyes. No difference was found in 50 eyes. Both poor fixation (p=0.009) and more advanced cataract (p=0.013) were found to strongly increase the likelihood of better image quality by Topcon. Images acquired by Topcon before and after FFA were identical (100%). The healthy disc was usually dark on HRA (71%), but showed mild autofluorescence on Topcon (88%). The healthy fovea showed in 100% Hypo-FAF on HRA, while Topcon showed in 52% Iso-FAF, in 43% mild Hypo-FAF, and in 5% Hypo-FAF as on HRA. No difference of FAF was found for geographic atrophy, pigment changes, and drusen, although Topcon images were often more detailed. Hyper-FAF due to exudation showed better on HRA. Pigment epithelium detachment showed identical FAF behaviour on the border, but reduced FAF with Topcon in the center. Cystic edema was visible only on HRA in a petaloid pattern. Hard exsudates caused Hypo-FAF only on HRA, hardly visible on Topcon. Blocage phenomenon by blood however was identical. Conclusions: The filter set of Topcon and the single image acquisition appear to be an advantage for patients with cataract or poor fixation. Preceding FFA does not alter the Topcon FAF image. Regarding the FAF behaviour, there are differences between the two systems which need to be taken into account when interpreting the images.

Clonagem e purificação de fragmento da proteína capsidial de Banana streak OL virus

O objetivo deste trabalho foi clonar e induzir a expressão de fragmento da proteína capsidial de Banana streak OL virus (BSOLV-CP) em Escherichia coli, bem como purificar a proteína recombinante obtida. Empregou-se um par de iniciadores específicos para amplificar, em PCR, um fragmento de aproximadamente 390 pb, da região codificadora da porção central da BSOLV-CP. O fragmento obtido foi clonado em vetor pGEM-T Easy, subclonado em vetor pQE-30 e transformado em células de E. coli M15 (pREP4) por choque térmico. A expressão da proteína foi induzida por tiogalactopiranosídeo de isopropila (IPTG), e a proteína recombinante BSOLV-rcCP de 14 kDa foi detectada em Western blot e Dot blot. A expressão da proteína BSOLV-rcCP abre novas possibilidades para a obtenção de antígenos para a produção de antissoros contra o BSOLV.

Versatile iPad forensic acquisition using the Apple Camera Connection Kit

Peer reviewed

An embedded real-time red peach detection system based on an OV7670 camera, ARM Cortex-M4 processor and 3D Look-Up Tables

This work proposes the development of an embedded real-time fruit detection system for future automatic fruit harvesting. The proposed embedded system is based on an ARM Cortex-M4 (STM32F407VGT6) processor and an Omnivision OV7670 color camera. The future goal of this embedded vision system will be to control a robotized arm to automatically select and pick some fruit directly from the tree. The complete embedded system has been designed to be placed directly in the gripper tool of the future robotized harvesting arm. The embedded system will be able to perform real-time fruit detection and tracking by using a three-dimensional look-up-table (LUT) defined in the RGB color space and optimized for fruit picking. Additionally, two different methodologies for creating optimized 3D LUTs based on existing linear color models and fruit histograms were implemented in this work and compared for the case of red peaches. The resulting system is able to acquire general and zoomed orchard images and to update the relative tracking information of a red peach in the tree ten times per second.

Identification of Paintings from Camera-Phone Images

Peer-reviewed

Identification of paintings from camera-phone images

Peer-reviewed

Sinfonia da camera

Digitoitu 9. 9. 2008.

Biological and molecular characterization of an isolate of Tobacco streak virus obtained from soybeans in Brazil

A virus was isolated from soybean (Glycine max) plants with symptoms of dwarfing and bud blight in Wenceslau Braz County, Paraná, Brazil. The host range and properties resembled those of Tobacco streak virus (TSV). The purified virus showed three peaks in a frozen sucrose gradient. Antiserum was produced and the virus was serologically related to TSV. Electron microscopy detected 28 nm spherical particles. Coat protein (CP) had a Mr of 29.880 Da. A fragment of 1028 nt was amplified, cloned and sequenced. One open reading frame with 717 nt was identified and associated to the CP. The CP gene shared 83% identity with the sequence of TSV CP from white clover (Trifolium repens) (GenBank CAA25133). This is the first report of the biological and molecular characterization of TSV isolated from soybeans. It is proposed that this isolate be considered a strain of TSV named TSV-BR.

Detecção e análise da variabilidade de seqüências do Banana streak virus (BSV) em bananeiras no Brasil

A técnica de PCR utilizando-se "primers" degenerados para o gênero Badnavirus foi utilizada para a detecção e análise da variabilidade de seqüências do Banana streak virus (BSV) provenientes de bananeiras. A partir desta metodologia seqüências do vírus puderam ser detectadas em cultivares diplóides (AA), triplóides (AAA; AAB) e tetraplóides (AAAB). Foram encontrados quatro padrões de seqüência do BSV (estirpes BSVBR-1, BSVBR-2, BSVBR-3 e BSVBR-4), diferenciadas através da análise do perfil eletroforético das amostras amplificadas. A estirpe BSVBR-1 prevalece nos estados do Acre, Amazonas, Bahia, Ceará, Goiás, Minas Gerais, Piauí, Rio de Janeiro, Rondônia, Santa Catarina, e São Paulo, enquanto que, a estirpe BSVBR-2 foi encontrada em amostras oriundas do Amazonas e do Ceará. As estirpes BSVBR-3 e BSVBR-4 foram encontradas apenas no Ceará. Este trabalho revela a presença de diferentes estirpes do BSV no Brasil, bem como a existência de cultivares de bananeiras sadias e livres de seqüências virais do BSV integradas ao seu genoma.

Efeitos do Banana streak virus no desenvolvimento de cultivares de bananeira

Este trabalho avaliou, em condições de casa de vegetação, os efeitos da infecção pelo BSV no crescimento de cinco cultivares de bananeira. Mudas micropropagadas das cultivares SH 3640, FHIA 18, Caipira, Thap Maeo e Pioneira foram inoculadas com BSV pela cochonilha Planacoccus citri Risso. Como controles utilizaram-se mudas não inoculadas e inoculadas com cochonilhas não virulíferas. Avaliou-se a altura das plantas, o diâmetro do pseudocaule, o número de folhas, a área foliar e as massas da matéria seca da parte aérea e da raiz. Os primeiros sintomas do BSV foram detectados 15 dias após a inoculação em todas as plantas inoculadas com o vírus. Houve diferenças estatísticas significativas nas variáveis analisadas, concluindo-se que o vírus afetou o desenvolvimento das plantas de todas as cultivares avaliadas.

Dinâmica temporal e espacial da begomovirose causada por Tomato yellow vein streak virus em tomateiro na região de Campinas-SP

O objetivo desse trabalho foi caracterizar os padrões temporal e espacial do Tomato yellow vein streak virus (ToYVSV) em tomatais cultivados em condições de campo, no município de Sumaré, e de estufa plástica, na região de Elias Fausto, Estado de São Paulo. No ensaio de campo, plantado com a variedade Alambra, foram avaliadas 4.032 plantas, distribuídas em oito blocos. Em oito estufas plásticas, com plantios escalonados da variedade Ikram, foram avaliadas 6.016 plantas. As avaliações foram feitas com base nos sintomas característicos induzidos por esse vírus. A confirmação da identidade do vírus foi feita por meio da análise da seqüência de nucleotídeos de parte do DNA-A viral (genes AV1 e AC3). No ensaio em condições de campo, a incidência da doença evoluiu lentamente, desde um mínimo de 0,002 (proporção de plantas sintomáticas) até um máximo de 0,0497. Mesmo assim, foi possível constatar um efeito de borda, pois a incidência média de plantas doentes nos blocos situados nos bordos da área foi 2,1 vezes maior do que naqueles internos. O progresso da incidência da doença foi linear, o que indica que novas infecções foram devidas principalmente a um influxo constante de vetores virulíferos de fora para dentro da área avaliada. Nos plantios em estufas plásticas, os níveis finais de doença foram fortemente dependentes da época de plantio, com médias variando de 4,8% a 69,3%. A distribuição espacial de plantas sintomáticas nesses plantios foi fortemente agregada. Essa agregação provavelmente não se deve a infecções secundárias dentro das estufas plásticas, mas sim à concentração de plantas sintomáticas nos bordos das estufas, conseqüência da migração de vetores virulíferos a partir de áreas externas à estufa. Com base nesses resultados, sugere-se a eliminação de fontes de inóculo representadas por plantios mais velhos de tomateiro e por hospedeiras do vírus na vegetação espontânea como uma das principais medidas para o manejo da doença.