Free-and open source software for a course on network management: authoring and enactment of scripts based on collaborative learning strategies

This paper describes a Computer-Supported Collaborative Learning (CSCL) case study in engineering education carried out within the context of a network management course. The case study shows that the use of two computing tools developed by the authors and based on Free- and Open-Source Software (FOSS) provide significant educational benefits over traditional engineering pedagogical approaches in terms of both concepts and engineering competencies acquisition. First, the Collage authoring tool guides and supports the course teacher in the process of authoring computer-interpretable representations (using the IMS Learning Design standard notation) of effective collaborative pedagogical designs. Besides, the Gridcole system supports the enactment of that design by guiding the students throughout the prescribed sequence of learning activities. The paper introduces the goals and context of the case study, elaborates onhow Collage and Gridcole were employed, describes the applied evaluation methodology, anddiscusses the most significant findings derived from the case study.

Closed and open grade I and II tibial shaft fractures treated by reamed intramedullary nailing

RESUME Objectif : Le but de cette étude est d'évaluer les résultats du traitement par enclouage centre-médullaire alésé des fractures diaphysaires du tibia aussi bien fermées que pour les fractures ouvertes de stade I et II selon Gustillo. Méthodes: Entre 1997 et 2000, 119 patients présentant une fracture diaphysaire du tibia ont été traités dans notre service par un enclouage centre-médullaire alésé. En postopératoire, 96 patients, soit 70 fractures fermées et 26 fractures ouvertes I et II selon Gustillo, ont été suivis cliniquement et radiologiquement pour une période de plus d'une année et demi. L'introduction du clou centro-médullaire a été faite selon la technique habituelle, soit transtendineuse ou paratendineusé rotulienne. Tous les clous ont été alésés jusqu'à 1,5 mm au-dessus du diamètre du clou. Les patients ayant une fracture isolée du tibia ont été immédiatement mobilisés en charge partielle pour une période de 6 semaines. Ceux qui avaient des lésions associées, notamment au niveau de la cheville épsilatérale, ont nécessité la mise en place d'un plâtre de Type Sarmiento. Résultats : Six patients (6,3%) ont développé un syndrome des loges après chirurgie. Quarante-huit cas (50%) ont nécessité une dynamisation du clou après une période moyenne de 12 semaines en raison d'un retard de consolidation. En général, 90,6% des fractures ont consolidé après 24 semaines postopératoires en moyenne, sans aucune différence significative entre les fractures fermées et les fractures ouvertes. Deux patients (2,1 %) présentant une fracture ouverte degré II ont développé une infection profonde ayant nécessité un traitement. Nous avons également observé 9,4% de cals vicieux minimes et sans conséquence clinique. Huit patients (8,3%) ont eu une brisure des vis de .verrouillage mais également sans conséquence clinique. Au dernier contrôle, 52% des patients, dont ('introduction du clou s'est faite en transtendineux ont des douleurs antérieures du genou contre 14% parmi ceux où l'introduction était paratendineuse. Conclusion : L'enclouage centre-médullaire reste le traitement de choix pour les fractures diaphysaires du tibia, qu'elles soient fermées ou ouvertes degré I ou II selon Gustillo.

Laparoscopic and open colorectal surgery in everyday practice : retrospective study

Résumé Introduction: La plupart des études disponibles sur la chirurgie colorectale par laparoscopie concernent des patients hautement sélectionnés. Le but de cette étude est d'analyser les résultats à court et à long terme de l'ensemble des patients traités dans un service de chirurgie générale. Méthodes: Il s'agit d'une analyse rétrospective d'un registre prospectif interne au service, dans lequel tous les patients consécutifs opérés pour la première fois du colon et du rectum entre mars 1993 et décembre 1997 ont été enregistrés. Les informations concernant le suivi ont été collectées par questionnaire. Résultats: Un total de 187 patients ont été opérés par laparoscopie et 215 patients par chirurgie ouverte durant la période d'étude. Les informations concernant le suivi ont pu être collectées dans 95% des cas avec une évolution de 1-107 mois (médiane 59 mois), respectivement de 1-104 mois (médiane 53 mois). Une conversion fut nécessaire dans 28 cas (15%) mais ceux-ci restent inclus dans le groupe laparoscopie pour l'analyse par intention de traitement. Dans le groupe laparoscopie, les opérations ont duré plus longtemps (205 vs 150 min, p<0.001) mais l'hospitalisation a été plus courte (8 vs 13 jours, p<0.001). La reprise du transit a été plus rapide après laparoscopie, mais uniquement après intervention sur le colon gauche (3 vs 4 jours, p<0.01). Cependant, la sélection préopératoire (nombre plus élevé d'urgences et de patients avec un risque anesthésiologique élevé dans le groupe de la chirurgie ouverte) a été favorable à la laparoscopie. Le taux de complications (global ainsi que pour chaque complication chirurgicale) a été similaire dans les deux groupes, avec un taux global de 20% environ. Conclusions: Malgré une sélection favorable des cas, uniquement très peu d'avantages à la laparoscopie sur la chirurgie ouverte ont pu être observés. Abstract Background: Most studies available on laparoscopic colorectal surgery focus on highly selected patient groups. The aim of the present study was to review short- and long-term outcome of everyday patients treated in a general surgery department. Methods: Retrospective review was carried out of a prospective database of all consecutive patients having undergone primary laparoscopic (LAP) or open colorectal surgery between March 1993 and December 1997. Follow-up data were completed via questionnaire. Results: A total of 187 patients underwent LAP resection and 215 patients underwent open surgery. Follow up was complete in 95% with a median of 59 months (range, 1-107 months) and 53 months (range, 1-104 months), respectively. There were 28 conversions (15%) in the LAP group and these remained in the LAP group in an intention-to-treat analysis. The LAP operations lasted significantly longer for all types of resections (205 vs 150 min, P<0.001) and hospital stay was shorter (8 vs 13 days, P<0.001). Recovery of intestinal function was faster in the LAP group, but only after left-sided procedures (3 vs 4days, P<0.01). However, preoperative patient selection (more emergency operations and patients with higher American Society of Anesthesiologists (ASA) score in the open group) had a major influence on these elements and favours the LAP group. Surprisingly, the overall surgical complication rate (including long-term complications such as wound hernia) was 20% in both groups with rates of individual complications also being comparable in both groups. Conclusion: Despite a patient selection favourable to the laparoscopy group, only little advantage in postoperative outcome could be shown for the minimally invasive over the open approach in the everyday patient.

Closed and open grade I and II tibial shaft fractures treated by reamed intramedullary nailing.

OBJECTIVE: To evaluate the results of closed and open grade I and II tibial shaft fractures treated by reamed nail and unreamed nailing. SUBJECTS AND METHODS: Between 1997 and 2000, 119 patients with tibial shaft fractures were treated with reamed tibial nails. Postoperatively 96 patients (70 closed and 26 grade I and II open fractures) were followed clinically and radiologically for up to 18 months. The nail was inserted either by patellar tendon splitting or by nonsplitting technique. The nail was inserted after overreaming by 1.5 mm. Postoperatively, patients with isolated tibial fracture were mobilized by permitting partial weight bearing on the injured leg for 6 weeks. Patients with associated ankle fractures were allowed to walk with a Sarmiento cast. RESULTS: Postoperatively, 6 (6.3%) patients developed a compartment syndrome after surgery. In 48 (50%) cases, dynamization of the nail was carried out after a mean period of 12 weeks for delayed union. Overall, a 90.6% union was obtained at a mean of 24 weeks without difference between closed or open fractures. Two (2.1%) patients with an open grade II fracture developed a deep infection requiring treatment. A 9.4% rate of malunion was observed. Eight (8.3%) patients developed screw failure without clinical consequences. At the last follow-up, 52% of patients with patellar tendon splitting had anterior knee pain, compared to those (14%) who did not have tendon splitting. CONCLUSION: Reamed intramedullary nail is a suitable implant in treating closed as well as grade I and II open tibial shaft fractures.

Candida species distribution and antifungal susceptibility testing according to European Committee on Antimicrobial Susceptibility Testing and new vs. old Clinical and Laboratory Standards Institute clinical breakpoints: a 6-year prospective candidaemia survey from the fungal infection network of Switzerland.

We analyzed the species distribution of Candida blood isolates (CBIs), prospectively collected between 2004 and 2009 within FUNGINOS, and compared their antifungal susceptibility according to clinical breakpoints defined by the European Committee on Antimicrobial Susceptibility Testing (EUCAST) in 2013, and the Clinical and Laboratory Standards Institute (CLSI) in 2008 (old CLSI breakpoints) and 2012 (new CLSI breakpoints). CBIs were tested for susceptiblity to fluconazole, voriconazole and caspofungin by microtitre broth dilution (Sensititre(®) YeastOne? test panel). Of 1090 CBIs, 675 (61.9%) were C. albicans, 191 (17.5%) C. glabrata, 64 (5.9%) C. tropicalis, 59 (5.4%) C. parapsilosis, 33 (3%) C. dubliniensis, 22 (2%) C. krusei and 46 (4.2%) rare Candida species. Independently of the breakpoints applied, C. albicans was almost uniformly (>98%) susceptible to all three antifungal agents. In contrast, the proportions of fluconazole- and voriconazole-susceptible C. tropicalis and F-susceptible C. parapsilosis were lower according to EUCAST/new CLSI breakpoints than to the old CLSI breakpoints. For caspofungin, non-susceptibility occurred mainly in C. krusei (63.3%) and C. glabrata (9.4%). Nine isolates (five C. tropicalis, three C. albicans and one C. parapsilosis) were cross-resistant to azoles according to EUCAST breakpoints, compared with three isolates (two C. albicans and one C. tropicalis) according to new and two (2 C. albicans) according to old CLSI breakpoints. Four species (C. albicans, C. glabrata, C. tropicalis and C. parapsilosis) represented >90% of all CBIs. In vitro resistance to fluconazole, voriconazole and caspofungin was rare among C. albicans, but an increase of non-susceptibile isolates was observed among C. tropicalis/C. parapsilosis for the azoles and C. glabrata/C. krusei for caspofungin according to EUCAST and new CLSI breakpoints compared with old CLSI breakpoints.

Development of Object-Oriented Design and Specifications for Iowa DOT and Urban Standards: Phase I, TR-487, 2004

Currently, individuals including designers, contractors, and owners learn about the project requirements by studying a combination of paper and electronic copies of the construction documents including the drawings, specifications (standard and supplemental), road and bridge standard drawings, design criteria, contracts, addenda, and change orders. This can be a tedious process since one needs to go back and forth between the various documents (paper or electronic) to obtain information about the entire project. Object-oriented computer-aided design (OO-CAD) is an innovative technology that can bring a change to this process by graphical portrayal of information. OO-CAD allows users to point and click on portions of an object-oriented drawing that are then linked to relevant databases of information (e.g., specifications, procurement status, and shop drawings). The vision of this study is to turn paper-based design standards and construction specifications into an object-oriented design and specification (OODAS) system or a visual electronic reference library (ERL). Individuals can use the system through a handheld wireless book-size laptop that includes all of the necessary software for operating in a 3D environment. All parties involved in transportation projects can access all of the standards and requirements simultaneously using a 3D graphical interface. By using this system, users will have all of the design elements and all of the specifications readily available without concerns of omissions. A prototype object-oriented model was created and demonstrated to potential users representing counties, cities, and the state. Findings suggest that a system like this could improve productivity to find information by as much as 75% and provide a greater sense of confidence that all relevant information had been identified. It was also apparent that this system would be used by more people in construction than in design. There was also concern related to the cost to develop and maintain the complete system. The future direction should focus on a project-based system that can help the contractors and DOT inspectors find information (e.g., road standards, specifications, instructional memorandums) more rapidly as it pertains to a specific project.

Anti-angiogenic therapies in cancer: achievements and open questions.

The approval in 2004 of bevacizumab (Avastin), a neutralizing monoclonal antibody directed against vascular endothelial growth factor (VEGF) as the first anti-angiogenic systemic drug to treat cancer patients validated the notion introduced 33 years earlier by Dr. Judah Folkman, that inhibition of tumor angiogenesis might be a valid approach to control tumor growth. Anti-angiogenic therapy was greeted in the clinic a major step forward in cancer treatment. At the same time this success recently boosted the field to the quest for new anti-angiogenic targets and drugs. In spite of this success, however, some old questions in the field have remained unanswered and new ones have emerged. They include the identification for surrogate markers of angiogenesis and anti-angiogenesis, the understanding about how anti-angiogenic therapy and chemotherapy synergize, the characterization of the biological consequences of sustained suppression of angiogenesis on tumor biology and normal tissue homeostasis, and the mechanisms of tumor escape from anti-angiogenesis. In this review we summarize some of these outstanding questions, and highlight future challenges in clinical, translational and experimental research in anti-angiogenic therapy that need to be addressed in order to improve current treatments and to design new drugs.

rDock: A Fast, Versatile and Open Source Program for Docking Ligands to Proteins and Nucleic Acids

Identification of chemical compounds with specific biological activities is an important step in both chemical biology and drug discovery. When the structure of the intended target is available, one approach is to use molecular docking programs to assess the chemical complementarity of small molecules with the target; such calculations provide a qualitative measure of affinity that can be used in virtual screening (VS) to rank order a list of compounds according to their potential to be active. rDock is a molecular docking program developed at Vernalis for high-throughput VS (HTVS) applications. Evolved from RiboDock, the program can be used against proteins and nucleic acids, is designed to be computationally very efficient and allows the user to incorporate additional constraints and information as a bias to guide docking. This article provides an overview of the program structure and features and compares rDock to two reference programs, AutoDock Vina (open source) and Schrodinger's Glide (commercial). In terms of computational speed for VS, rDock is faster than Vina and comparable to Glide. For binding mode prediction, rDock and Vina are superior to Glide. The VS performance of rDock is significantly better than Vina, but inferior to Glide for most systems unless pharmacophore constraints are used; in that case rDock and Glide are of equal performance. The program is released under the Lesser General Public License and is freely available for download, together with the manuals, example files and the complete test sets, at http://rdock.sourceforge.net/

Faculty and Student Perspectives Toward Open Courseware, and Open Access Publishing: Some Comparisons Between European and North American Populations

Instructor and student beliefs, attitudes and intentions toward contributing to local open courseware (OCW) sites have been investigated through campus-wide surveys at Universidad Politecnica de Valencia and the University of Michigan. In addition, at the University of Michigan, faculty have been queried about their participation in open access (OA) publishing. We compare the instructor and student data concerning OCW between the two institutions, and introduce the investigation of open access publishing in relation to open courseware publishing.

Theses and Dissertations Digital Library: Ten years of Open Access and Open Archives in Brazil

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Use of simulated annealing in standardization and optimization of the acerola wine production

In this study, seven wine samples were prepared varying the amount of pulp of acerola fruits and the sugar content using the simulated annealing technique to obtain the optimal sensory qualities and cost for the wine produced. S. cerevisiae yeast was used in the fermentation process and the sensory attributes were evaluated using a hedonic scale. Acerola wines were classified as sweet, with 11°GL of alcohol concentration and with aroma, taste, and color characteristics of the acerola fruit. The simulated annealing experiments showed that the best conditions were found at mass ratio between 1/7.5-1/6 and total soluble solids between 28.6-29.0 °Brix, from which the sensory acceptance scores of 6.9, 6.8, and 8.8 were obtained for color, aroma, and flavor, respectively, with a production cost 43-45% lower than the cost of traditional wines commercialized in Brazil.