Sources of Brazil's Counter-Hegemony

There have been two key initiatives taken in the last two decades in Brazil to create a counter-hegemonic project for the country. One initiative resulted from Brazil's business community and high-level State bureaucracy and aimed at forming a regional economic and political bloc that would guarantee and enlarge a relative independence from the hegemonic powers. The other resulted from the emergence of the new unionist movement in São Paulo and from the formation of Partido dos Trabalhadores and aimed at promoting radical democratization and reducing social exclusion. Both initiatives have created policies and changes that have converged to enhance Brazil's counter-hegemonic position as a regional and emerging power.

Productivity of irrigated beans due to sources of stabilized nitrogen fertilizer and controlled release

ABSTRACT New nitrogen fertilizers are available in the market actually, however, does not have results on the efficiency of the Cerrado conditions. With that objective of this study was to evaluate the effect of urea including stabilized and controlled release urea on yield of irrigated common beans (Phaseolus vulgaris L) in no-tillage system. The experiment was conducted in the winter crop, at Embrapa Arroz e Feijão, in Santo Antônio de Goiás, State of Goiás, Brazil. The experimental design was randomized blocks, with five replicates. Treatments consisted of five N sources (urea, urea + NBPT, urea + polymer, ammonium sulphate, and ammonium nitrate) and a control (without N) being applied 20 kg ha-1 of N at sowing and 80 kg ha-1 onf N in topdressing. We evaluated the chlorophyll content in leaves of common beans, the leaf N content and dry mass weight (MSPA) in the flowering of common beans, the number of pods per plant, number of grains per pod, mass of 100 grains, grain yield and final stand of the common beans. The sources of nitrogen fertilizer did not influence, leaf N content, the mass of MSPA and the relative chlorophyll index of common beans. The use of polymerized urea and urea with urease inhibitor, did not produce increases in the number of grains per pod, number of pods per plant, mass of 100 grains and common beans yield compared to traditional sources of N, urea, ammonium sulfate and ammonium nitrate.

Drilling of fibre reinforced plastic laminates

The use of fibre reinforced plastics – FRP’s – in structures is under a considerable increase. Advantages of their use are related with their low weight, high strength and stiffness. The improvement of the dynamic characteristics has been profitable for aeronautics, automobile, railway, naval and sporting goods industries. Drilling is a widely used machining technique as it is needed to assemble parts in a structure. This is a unique machining process, characterized by the existence of two different mechanisms: extrusion by the drill chisel edge and cutting by the rotating cutting lips. Drilling raises particular problems that can reduce mechanical and fatigue strength of the parts. In this work, quasi-isotropic hybrid laminates with 25% of carbon fibre reinforced plies and 4 mm thickness are produced, tested and drilled. Three different drill geometries are compared. Results considered are the interlaminar fracture toughness in Mode I – GIc –, thrust force during drilling and delamination extent after drilling. A bearing test is performed to evaluate tool influence on the load carrying capacity of the plate. Results consider the influence of drill geometry on delamination. A correlation linking plate damage to bearing test results is presented.

Damage assessment of fibre reinforced laminates

The use of solid wastes and natural fibres to the production of innovative composites is now a matter of environmental need. A set of hybrid composites constituted of waste rubber particles and sugarcane bagasse fibres into a thermoset composite material are drilled to determine the effect of rubber particle addition and size, sugarcane fibre addition and length and fibre chemical treatment on damage extension and related mechanical properties. Damage extension is determined by enhanced radiography for further damage measurement – diameter and areas – and correlated with mechanical test results — bearing test. The results demonstrated significant effect of the rubber and fibre additions on mechanical properties of the composites.

The sources of the union wage gap

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Economics from the NOVA – School of Business and Economics

The influence of fibre orientation on the post-cracking tensile behaviour of steel fibre reinforced self-compacting concrete

Adding fibres to concrete provides several advantages, especially in terms of controlling the crack opening width and propagation after the cracking onset. However, distribution and orientation of the fibres toward the active crack plane are significantly important in order to maximize its benefits. Therefore, in this study, the effect of the fibre distribution and orientation on the post-cracking tensile behaviour of the steel fibre reinforced self-compacting concrete (SFRSCC) specimens is investigated. For this purpose, several cores were extracted from distinct locations of a panel and were subjected to indirect (splitting) and direct tensile tests. The local stress-crack opening relationship (σ-w) was obtained by modelling the splitting tensile test under the finite element framework and by performing an Inverse Analysis (IA) procedure. Afterwards the σ-w law obtained from IA is then compared with the one ascertained directly from the uniaxial tensile tests. Finally, the fibre distribution/orientation parameters were determined adopting an image analysis technique.

Pultrusion of fibre reinforced thermoplastic pre-impregnated materials

Fibre reinforced thermoplastic pre impregnated materials produced continuously by diverse methods and processing conditions were used to produce composites using pultrusion. The processing windows used to produce these materials and composites profiles were optimized by using the Taguchi / DOE (Design of Experiments) methods. Composites were manufactured by pultrusion and compression moulding and subsequently submitted to mechanical testing and microscopy analysis. The obtained results were compared with the expected theoretical ones predicted from the Rule of Mixtures (ROM) and with those of similar engineering conventional available materials. The results obtained shown that produced composites have adequate properties for applications in common and structural engineering markets.

Clinical impact of transesophageal echocardiography in patients with stroke without clinical evidence of cardiovascular sources of emboli

OBJECTIVE: The purpose of this study is to evaluate the impact of transeophageal echocardiography on management of patients at low-risk for cardiogenic embolism to prevent new potential cardiovascular sources of emboli. METHODS: We studied 69 patients with ischemic stroke at low-risk for cardiogenic embolism. Transeophageal echocardiography was performed to access: left atrium enlargement; communication or aneurysm of the interatrial septum; patent foramen ovale; spontaneous echo contrast or intracavitary thrombi; the presence of intraaortic atherosclerotic plaques or thrombi; significant valvar morphologic alteration or dysfunction; left ventricle enlargement, hypertrophy, or contractile abnormality. Transesophageal echocardiography altered clinical management, and we adopted anticoagulant therapy or another procedure apart from the use of acetylsalicylic acid. RESULTS: Transeophageal echocardiography detected at least one abnormality in 40 cases (58%). Clinical conduct was adjusted after the performance of transesophageal echocardiography in 11 patients (15.9%); anticoagulation was added in 10 cases and surgical correction in one patient. CONCLUSION: Transeophageal echocardiography was a very useful tool in the secondary prevention for stroke in patients at low risk for cardiogenic embolism.

The physiology of plants; a treatise upon the metabolism and sources of energy in plants, by Dr. W. Pfeffer ... 2d fully rev. ed., translated and edited by Alfred J. Ewart.

1

The physiology of plants; a treatise upon the metabolism and sources of energy in plants, by Dr. W. Pfeffer ... 2d fully rev. ed., translated and edited by Alfred J. Ewart.

3

The physiology of plants; a treatise upon the metabolism and sources of energy in plants, by Dr. W. Pfeffer ... 2d fully rev. ed., translated and edited by Alfred J. Ewart.

2

Non root feeding with two sources of zinc on Coffea arábica L. 'mundo novo'(B.Rodr.) Choussy

A trial was carried out on an eight old coffee plantation with visible zinc problems. The plantation was situated nearly the city of Jaú (22º30'S, 48º30'W). State of São Paulo, Brazil. The soil is classified as medium texture Oxisol of low base saturation (Latossol Vermelho Amarelo - fase arenosa). The pulverization program started in november 1977, followed in march and July 1978 (heavy harvest) and ended in march and July 1979 (light harvest). Is should be mentioned that a well reconized characteristic of arábica coffe is its habit of biennial bearing, a very heavy harvest is most often followed by a light load the next year. The following treatments and amounts of chemicals per cova hole (4 trees) were tested in accordance with a random block design: 1. 1 g of zinc (zinc sulphate, 0.5%) 2. 3 g of nitrogen (urea, 1.3%) 3. 1 g of zinc + 3 g of nitrogen (zinc sulphate 0.5% + urea 1.3%) 4. 0.25 g, 0.50 g, 1.00 g, 2.00 g of zinc plus 0.75 g, 1.50 g, 3.00 g and 6.00 of nitrogen (correspondent to NZN* 15-0-0-5 as 0.75%, 1-5%, 3.0% and 6.0% by v/v). Foliar absorption data were obtained by collecting the 3rd and 4th pairs of the coffee leaves and analysed them for N, P, K, Ca, Mg, S, B, Cu, Fe, Mn, and Zn. The main results may be summarized as follows: 1. The maximum calculated yields of clean coffee were obtained by the applications of 5.84 1 of NZN (1.13%) per hectare. 2. The applications of zinc sulphate (0.5%) and urea (1.3%) together or separate did not affected the coffee bean production. 3. The applications of 15.0 1 of NZN per hectare reduced the coffee yields. 4. Leaf damages and burning symptoms were observed by the applications of urea (1.3%) plus zinc sulphate (0.5%) and larger doses than 7.5 1 of NZN per hectare. 5. Leaf tissue analysis show that the concentrations of the elements were affecred by the age of the leaves and by the yields of the coffee trees. 6. The applications of increasing doses of NZN causes an increase in the concentration of zinc, manganese and boron in the leaves and decreased the concentration in calcium and potassium the leaves. 7. The concentration of zinc in the leaves associated with the heavy harvest, in July, was 70.0 ppm.

External sources of innovation and industry-university interaction:evidence from Spanish firms

This paper is about the firm innovation process and the cooperation of the innovative firms with other firms and public institutions. A special attention is paid to the cooperation with universities. We use the Technological Innovation Survey (TIS) from the Instituto Nacional de Estadística (Spain) in order to obtain data for 4,159 innovative firms. Our results show that firm's cooperation activities are closely linked to the characteristics of the industry and the firm as well as to the origin of public funds for R&D activities. Key words: Innovation, universities, Spanish economy. JEL code: O31, I20, L60