Estudio de la compactación de un Ferralsol manejado con un sistema de no laboreo en Selvíria (MS, Brasil)

No tillage management is widely used by the Brazilian farmers and technicians like a soil conservation system, which reduces the soil losses by water erosion, increasing the infiltrated and stored water in soil, warranting environmental sustainability. No-tillage system does not invert the soil; it causes the creation of a compacted layer. The samples were taken in the agricultural year 2005/2006 in an Oxisoil at Selviria (MS/Brazil). The tillage management in the last 15 years was no-tillage system with crop rotation (maize -Zea mays L./bean - Phaseolus vulgaris L.). The analyzed soil physical properties were bulk density (BS), gravimetric water content (U) and mechanical resistance to penetration (RP) at three depths: 0-0.10 m, 0.10-0.20 m and 0.20-0.30 m. The samples were taken in a mesh with 117 sampled points covering an area of 0.16 ha. It was investigated the existence of compacted soil layer, using the mechanical resistance to penetration to 0.60 m depth with soil water content at field capacity. The data shows low coefficient of variation, except the resistance penetration data. Bulk density and gravimetric water content has a normal distribution. Only resistance to penetration at 0.10-0.20 m depth layer has a normal distribution. The correlation between different properties was low. The bulk density increases with depth; the increase of the values of soil bulk density are consistent with data in other papers, indicating there are not compaction problems for the crop development at the study area. Most of the values of resistance to penetration are lower than 2 MPa, being this value restrictive for root development. The analysis of resistance to penetration profile 0 to 0.60 m shows a compacted layer between 0.20-0.30 m. This compacted layer was caused by the conventional tillage system used at this area before the use of no-tillage system. The soil bulk density has higher values at the upper area, that it shows higher values of soil compaction. Although the values of bulk density and resistance to penetration are high, the area does not show great problems of soil compaction.

Variabilidade espacial da resistência mecânica do solo à penetração e umidade do solo em área cultivada com cana-de-açúcar na região de Humaitá, Amazonas, Brasil

The mechanical resistance to penetration (RP) is an attribute indicator of compaction was influenced by soil moisture. The objective of this study was to evaluate the spatial variability of soil resistance to penetration and soil moisture on area under cultivation of sugar cane in the region of Humaitá, Amazonas, Brazil. We conducted a sampling grid of 70x70 m where points were scored at regular intervals of 10 m, a total of 64 points. Soil samples were collected at depths of 0.00 to 0.15 m, 0.15 to 0.30 I 0.30 to 0.45 m for determination of soil moisture and soil resistance to penetration in the field. After analysis of these data analyzes were descriptive statistics and geostatistics. We conclude that all the variables studied showed spatial dependence and range values were higher than stipulated by the sampling grid and the RP and soil moisture showed a spatial relationship where lower values of PR concentrated on smaller values of soil moisture.

Atributos físicos do solo em áreas de plantio direto com e sem escarificação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da degradação dos solos em áreas de pastagens no município de Porto Velho (RO)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Variabilidade espacial de atributos dendrométricas do eucalipto e de um neossolo quartzarênico a partir da aplicação de calcário ou lama de cal + oxyfertil

Pós-graduação em Agronomia - FEIS

Rotação e técnicas de manejo de biomassa em sistema plantio direto no cultivo de soja e milho

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Atributos físicos de um Latossolo Vermelho submetido a diferentes usos

The cultivation of the soil causes changes in physical attributes, depending on the intensity of preparation and management. The objective of this work was to evaluate the degree of modification of some physical properties of soil mid the S index, comparing areas of Pasture of grass Tanzania (Panicum maximum) and native forest with an area under maize (Zea mays L.) irrigated bay, a central pivot. The study was conducted in three areas within the Agency of Technology Agribusiness Paulista (APTA) Regional High Mogiana, located in Colina, SP. The experimental design was split plot in a factorial 3 x 3, with 4 replications, where the plots were installed in areas of Cultivation of corn, pasture and forest in the depths 0-0.1 m, 0.1-0.2 m 0.2-0.3 m. The physical attributes of soil were: resistance to penetration (RP), bulk density (Ds), microporosity (Micro), macroporosity (Macro), total volume of pores (VTP) and water retention in soil. The native forest had the best physical condition of soil in all parameters examined. The use of land and pasture with corn altered the physical structure of it, evidenced by the increase in penetration resistance and soil density and, reduction in macroporosity. The level of degradation of the managed soil was considered low, index S (<0035). The replacement of pasture by the corn crop in the soil tillage system provided a conventional mild improvement in soil physical characteristics.

Evaluating responses of maize (Zea mays L.) to soil physical conditions using a boundary line approach

The functional relation between the decline in the rate of a physiological process and the magnitude of a stress related to soil physical conditions is an important tool for uses as diverse as assessment of the stress-related sensitivity of different plant cultivars and characterization of soil structure. Two of the most pervasive sources of stress are soil resistance to root penetration (SR) and matric potential (psi). However, the assessment of these sources of stress on physiological processes in different soils can be complicated by other sources of stress and by the strong relation between SR and psi in a soil. A multivariate boundary line approach was assessed as a means of reducing these cornplications. The effects of SR and psi stress conditions on plant responses were examined under growth chamber conditions. Maize plants (Zea mays L.) were grown in soils at different water contents and having different structures arising from variation in texture, organic carbon content and soil compaction. Measurements of carbon exchange (CE), leaf transpiration (ILT), plant transpiration (PT), leaf area (LA), leaf + shoot dry weight (LSDW), root total length (RTL), root surface area (RSA) and root dry weight (RDW) were determined after plants reached the 12-leaf stage. The LT, PT and LA were described as a function of SR and psi with a double S-shaped function using the multivariate boundary line approach. The CE and LSDW were described by the combination of an S-shaped function for SR and a linear function for psi. The root parameters were described by a single S-shaped function for SR. The sensitivity to SR and psi depended on the plant parameter. Values of PT, LA and LSDW were most sensitive to SR. Among those parameters exhibiting a significant response to psi, PT was most sensitive. The boundary line approach was found to be a useful tool to describe the functional relation between the decline in the rate of a physiological process and the magnitude of a stress related to soil physical conditions. (C) 2009 Elsevier B.V. All rights reserved.

Portable penetrometer for agricultural soil: sensitivity test to identify critical compaction depth

To express the negative effects of soil compaction, some researchers use critical values for soil mechanical strength that severely impair plant growth. The aim of this study was to identify this critical compaction depth, to test the functionality of a new, portable penetrometer developed from a spring dynamometer, and compare it to an electronic penetrometer traditionally used in compaction studies of agricultural soils. Three soils with distinct texture were conventionally tilled using a disk plow, and cultivated with different plant species. The critical soil resistance defined to establish critical compaction depth was equal to 1.5 MPa. The results of the new equipment were similar to the electronic penetrometer, indicating its viability as a tool for assessing the soil physical conditions for plant growth.

Compared performance of penetrometers and effect of soil water content on penetration resistance measurements

Modern agriculture techniques have a great impact on crops and soil quality, especially by the increased machinery traffic and weight. Several devices have been developed for determining soil properties in the field, aimed at managing compacted areas. Penetrometry is a widely used technique; however, there are several types of penetrometers, which have different action modes that can affect the soil resistance measurement. The objective of this study was to compare the functionality of two penetrometry methods (manual and automated mode) in the field identification of compacted, highly mechanized sugarcane areas, considering the influence of soil water volumetric content (θ) on soil penetration resistance (PR). Three sugarcane fields on a Rhodic Eutrudrox were chosen, under a sequence of harvest systems: one manual harvest (1ManH), one mechanized harvest (1MH) and three mechanized harvests (3MH). The different degrees of mechanization were associated to cumulative compaction processes. An electronic penetrometer was used on PR measurements, so that the rod was introduced into the soil by hand (Manual) and by an electromechanical motor (Auto). The θ was measured in the field with a soil moisture sensor. Results showed an effect of θ on PR measurements and that regression models must be used to correct data before comparing harvesting systems. The rod introduction modes resulted in different mean PR values, where the "Manual" overestimated PR compared to the "Auto" mode at low θ.

Spatial variability of soil penetration resistance influenced by season of sampling

O objetivo deste trabalho foi analizar a distribuição espacial da compactação do solo e a influência da umidade do solo na resistência à penetração. Esta última variável foi descrita pelo índice de cone. O solo estudado foi Nitossolo e os dados de índice de cone foram obtidos usando um penetrômetro. A resistência do solo foi avaliada a 5 profundidades diferentes, 0-10 cm, 10-20 cm, 20-30 cm, 30-40 cm e mais de 40 cm, porém o conteúdo de umidade do solo foi medido a 0-20 cm e 20-40 cm. As condições hídricas do solo variaram nas diferentes amostragems. Os coeficientes de variação para o índice de cone foram 16,5% a 45,8% e os do conteúdo de umidade do solo variaram entre 8,96% e 21,38%. Os resultados sugeriram elevada correlação entre a resistência do solo, estimada pelo índice de cone e a profundidade do solo. Sem embargo, a relação esperada com a umidade do solo não foi apreciada. Observou-se dependência espacial em 31 de 35 séries de dados de índice de cone e umidade do solo. Esta dependência foi ajustada por modelos exponenciais com efeito pepita variável de 0 a 90% o valor do patamar. em séries de dados o comportamento foi aleatório. Portanto, a técnica das distâncias inversas foi utilizada para cartografar a distribuição das variáveis que não tiveram estrutura espacial. Na krigagem constatou-se uma suavização dos mapas comparados com esses das distâncias inversas. A krigagem indicadora foi utilizada para cartografar a variabilidade espacial do índice de cone e recomendar melhor manejo do solo.

Improvement of a testing apparatus for dynamometry: procedures for penetrometry and influence of strain rate to quantify the tensile strength of soil aggregates

Soil penetration resistance (PR) and the tensile strength of aggregates (TS) are commonly used to characterize the physical and structural conditions of agricultural soils. This study aimed to assess the functionality of a dynamometry apparatus by linear speed and position control automation of its mobile base to measure PR and TS. The proposed equipment was used for PR measurement in undisturbed samples of a clayey "Nitossolo Vermelho eutroférrico" (Kandiudalfic Eutrudox) under rubber trees sampled in two positions (within and between rows). These samples were also used to measure the volumetric soil water content and bulk density, and determine the soil resistance to penetration curve (SRPC). The TS was measured in a sandy loam "Latossolo Vermelho distrófico" (LVd) - Typic Haplustox - and in a very clayey "Nitossolo Vermelho distroférrico" (NVdf) - Typic Paleudalf - under different uses: LVd under "annual crops" and "native forest", NVdf under "annual crops" and "eucalyptus plantation" (> 30 years old). To measure TS, different strain rates were applied using two dynamometry testing devices: a reference machine (0.03 mm s-1), which has been widely used in other studies, and the proposed equipment (1.55 mm s-1). The determination coefficient values of the SRPC were high (R² > 0.9), regardless of the sampling position. Mean TS values in LVd and NVdf obtained with the proposed equipment did not differ (p > 0.05) from those of the reference testing apparatus, regardless of land use and soil type. Results indicate that PR and TS can be measured faster and accurately by the proposed procedure.

Evaluation of peanut genotypes for resistance to Tomato spotted wilt virus by mechanical and thrips inoculation

The objective of this work was to evaluate the reactions of three peanut breeding lines (IC-10, IC-34, and ICGV 86388) to Tomato spotted wilt virus (TSWV) by mechanical and thrips inoculation, under greenhouse conditions, and compare them to the reactions of cultivars SunOleic, Georgia Green, and the breeding line C11-2-39. TSWV infection by mechanical inoculation was visually assessed using an index ranging from 0 (no symptoms) to 4 (apical death). Enzyme-linked immunosorbent assay was used to confirm TSWV infection from both mechanical and thrips inoculations. IC-10, IC-34, ICGV 86388, and C11-2-39 were more resistant than the cultivars SunOleic and Georgia Green based on mechanical inoculation. Upon thrips inoculation only IC-34 and ICGV-86388 were infected by TSWV, as demonstrated by reverse transcription polymerase chain reaction (RT-PCR), although no symptoms of infection were observed. The peanut breeding lines IC-10, IC-34, and ICGV 86388 show higher level of resistance to TSWV than cultivar Georgia Green considered a standard for TSWV resistance.

The use of landforms to predict the variability of soil and orange attributes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sensitivity of cotton cultivars to soil compaction

Cotton is one of the most sensitive crops to soil compaction, but there may be genetic variability for this trait. The objective of this study was to evaluate cotton cultivars sensitivity to soil compaction. Soil columns were built with three pvc rings with internal diameter of 10 cm and filled with an alfisol. The heights of the top and bottom rings were 15 cm, and the intermediate ring, in which the soil was compacted, was 3.5 cm high. The levels of compression used in the subsurface were characterized by penetration resistances of 0.41, 0.93, 1.41 and 1.92 MPa. The cultivars 701 FMT, FMT 705, FMT 707, FMX 951 LL and FMX 966 LL were grown up to 23 days after plant emergence, when the dry matter of shoots and roots, root length density and root diameter were determined. The cotton cultivars have variability in their sensitivity to resistance to penetration. The cultivar 707 FMT is more sensitive to soil compaction, while the FMT 701 is more tolerant. Penetration resistance of around 0.92 to 1.06 MPa reduce 50% cotton root growth, but resistance to penetration of 1.92 MPa did not totally prevent growth.