Assessment of the physiological potential of spinach seeds (Tetragonia tetragonoides (Pall.) Kuntze)

The efficiency of vigor tests in assessing the physiological potential of seeds depends on their standardization for different species. In this context, the research aimed to study specific methodologies to evaluate the vigor of spinach seeds (Tetragonia tetragonoides). For this purpose, five lots of spinach seed cv. New Zealand were submitted to germination, first count of germination, seedling emergence in the field, accelerated aging (with and without use of saturated solution of NaCl at 41and 45 ºC for 24,48 and 72 hours), controlled deterioration (18,21 and 24% seed water content adjustments for 24 hours at 45 ºC) and electrical conductivity tests with variations inwater volume (25, 50 and 75 mL), seed quantity (25 and 50) and soaking period (1, 2, 4, 8,12, 16 and 24 hours) at 25 ºC. The first count test allowed obtaining preliminary information about seed vigor, and other tests in general showed similarity with seedling emergence in the field. Thus, it was concluded that traditional accelerated aging test 24 h /41 ºC and accelerated aging test with saturated salt solution for 24 h at 41 ºC and 45 ºC, and controlled deterioration test with 21% seed water content / 24 h / 45 ºC were all efficient for evaluating the physiological potential of spinach seeds.

Die 18 F-Fluorierung verschiedener Aminosäuren als Tracer für die Tumor-Diagnostik mittels Positronen-Emissions-Tomographie

Die Zielsetzung dieser Arbeit war die Synthese und Markierung, sowie die in vitro- und in vivo-Evaluierung zweier markierter Aminosäure. Es wurden die PET-Tumor-Tracer C1-(2-[18F]Fluoreth- ylamino)-asparagin und S-2-Amino-4-[18F]fluor-butansäure synthetisiert. Die Markierung zum C1-(2-[18F]Fluorethylamino)-asparagin wurde mit 2-[18F]Fluorethylamin als Precursor durchgeführt. Ausgehend von N,N-Dibenzyl-(2-bromethyl)-amin wurde zunächst N,N-Dibenzyl-(2-[18F]fluorethyl)-amin in einer nukleophilen Substiution mit [18F]Fluorid in Acetonitril bei 80 °C mit einer Reaktionsdauer von 5 min dargestellt. Zur Abtrennung überschüssigen [18F]Fluorids wurde das Roh-Produkt auf einer Sep-Pak Plus Kartusche (C18) fixiert und mit Acetonitril eluiert. Die Abspaltung der Benzyl-Schutzgruppen erfolgte durch die Zugabe von Pd/C zu dem eluierten N,N-Dibenzyl-(2-[18F]fluorethyl)-amin und Behandelung der Lösung im leichten Wasserstoffstrom. Im finalen Aufreinigungsschritt wird der Katalysator Pd/C mittels eines Membranfilters abgetrennt. Das 2-[18F]Fluorethylamin wird im Sauren in das Amino-Salz überführt und im Vakuum vom Lösungsmittel befreit. Die Markierung zum C1-(2-[18F]Fluorethylamino)-asparagin wurde in DMF durchgeführt. Die höchsten Ausbeuten werden nach 4 min bei 60 °C erhalten. Die Abspaltung der Schutzgruppe erfolgt durch Trifluoressigsäure bei Raumtemperatur in 8 min. Die Aufreinigung des C1-(2-[18F]Fluorethylamino)-asparagin mittels HPLC und Festphasenextraktion liegt das Produkt in einer isotonischne isotonischen Kochsalzlösung vor. Die in vitro-Versuche wurden mit C1-(2-[18F]Fluorethylamino)-asparagin an 5 verschiedenen Zelllinen durchgeführt, 3 Plattenepitele und 2 Melanome. Hierbei konnte eine erhöhte Akkumulation von C1 -(2-[18F]Fluorethylamino)-asparagin beobachtet werden, die innerhalb von 20 min einen konstanten Wert erreicht. Ein Blockade-Experiment zeigte, dass sich die Aufnahme von C1 -(2-[18F]Fluorethylamino)-asparagin durch gesättinge Asparagin-Lösung bei den Plattenepitelen gar nicht und bei den Melanomen nur leicht vermindern ließ. Da die Aufnahme von C1-(2-[18F]Fluorethylamino)-asparagin in die Zellen höher war als bei FDG bei dem gleichen Versuchsaufbau, wurden in vivo-Versuche angesetzt. Die in vivo-Versuche an Sprague Dawley Ratten mit C1-(2-[18 F]Fluorethylamino)-asparagin zeigten keine messbare Anreicherung von C1-(2-[18F]Fluorethylamino)-asparagin in Tumoren. Fast die komplette Aktivität wurde in der Niere und Blase wiedergefunden. Die Synthese von S-2-Amino-4-[18F]fluor-butansäure wurde über stereodirigierende Auxilliare realisiert. Dazu wurden die geeignetsten Auxillare ausgewählt und auf ihre Eignung verglichen. Der Vergleich der stereodirigierenden Auxilare zeigte, dass das (1R,2R,5R)-2-Hydroxy-2,6,6-trimethyl- bicyclo[3.1.1]hept-3-ylidenamino)-essigsäure tert.-butylester (Laue-Auxillar) am geeignetesten ist. Die 18F-Markierung von S-2-Amino-4-[18F]fluor-butansäure wurde so optimiert, dass eine möglichst hohe stereochemische Reinheit des Produktes erzielt wird. Die optische Reinheit von S-2-Amino-4-[18 F]fluor-butansäure wurde mit > 93 % ee berechnet. Die Synthese des Markierungsvorläufers wurde ausgehend vom Laue-Auxilliar aufgebaut. Als Abgangsgruppe hat sich die Tosylgruppe besonders bewährt. Sie lässt sich unter besonders schonenden Bedingungen in den säurelabilen (1R,2R,5R)-4-Hydroxy-2-(2-hydroxy-2,6,6-trimethyl-bi- cyclo[3.1.1]hept-3-ylidenamino) butansäure tert.-butylester einführen. Bei der 18F-Markierung von S-2-Amino-4-[18F]fluor-butansäure mittels n.c.a. [18F]Fluorid hat sich die Wahl des Basensystems als besonders wichtig erwiesen. Die maximale Ausbeuten von 55% wurde mit Oxalat als Basensystem in Acetonitril bei 80 °C und einer Reaktionszeit von 15 min erzielen. Die Abspaltung der Schutzgruppen und die Abtrennung des Produktes wird in mehreren Schritten durchgeführt einschließlich einer HPLC-Abtrennung. Es wird nach 150 min Synthesedauer das gereinigte S-2-Amino-4-[18F]fluor-butansäure in isotonischer Kochsalzlösung mit einer Ausbeute von > 10 % RCA erhalten. Bei in vivo-Versuchen an Sprague Dawley Ratten reicherte sich der Hauptteil der Aktivität in der Niere an und nur weniger als ein halbes Prozent der applizierten Aktivität fand sich in den Tumoren wieder. Nach 10 min wurde ein maximaler Wert erreicht, der sich bis zum Ende der Messung nicht verändert. Das Verhältnis von Tumoraktivität zu unspezifisch-gebundener Aktivität betrug 2,2. Damit liegt das Verhältnis im Bereich der meisten klinisch eingesetzten PET-Tumor-Tracer wie dem des O-(2-[18F]Fluorethyl)-L-tyrosin mit 1,5.

Barium isotope fractionation during witherite (BaCO3) dissolution, precipitation and at equilibrium

This study examines the behavior of Ba isotope fractionation between witherite and fluid during mineral dissolution, precipitation and at chemical equilibrium. Experiments were performed in batch reactors at 25 oC in 10-2 M NaCl solution where the pH was adjusted by continuous bubbling of a water saturated gas phase of CO2 or atmospheric air. During witherite dissolution no Ba isotope fractionation was observed between solid and fluid. In contrast, during witherite precipitation, caused by a pH increase, a preferential uptake of the lighter 134Ba isotopomer in the solid phase was observed. In this case, the isotope fractionation factor αwitherite-fluid is calculated to be 0.99993 ± 0.00004 (or Δ137/134Bawitherite-fluid ≈ -0.07 ± 0.04 ‰, 2sd). The most interesting feature of this study, however, is that after the attainment of chemical equilibrium, the Ba isotope composition of the aqueous phase is progressively becoming lighter, indicating a continuous exchange of Ba2+ ions between witherite and fluid. Mass balance calculations indicate that the detachment of Ba from the solid is not only restricted to the outer surface layer of the solid, but affects several (~7 unit cells) subsurface layers of the crystal. This observation comes in excellent agreement with the concept of a dynamic system at chemical equilibrium in a mineral-fluid system, denoting that the time required for the achievement of isotopic equilibrium in the witherite-fluid system is longer compared to that observed for chemical equilibrium. Overall, these results indicate that the isotopic composition of Ba bearing carbonates in natural environments may be altered due to changes in fluid composition without a net dissolution/precipitation to be observed.

Effect Of Particles Of Ashes Produced From Sugarcane Burning On The Respiratory System Of Rats.

The practice of burning sugarcane obtained by non-mechanized harvesting exposes workers and the people of neighboring towns to high concentrations of particulate matter (PM) that is harmful to health, and may trigger a series of cardiorespiratory diseases. The aim of this study was to analyze the chemical composition of the micro-particles coming from sugarcane burning residues and to verify the effects of this micro-particulate matter on lung and tracheal tissues. Micro-particulate matter (PM10) was obtained by dissolving filter paper containing burnt residues in NaCl solution. This material was instilled into the Wistar rats' nostrils. Histological analyses (hematoxylin and eosin - HE) of cardiac, lung and tracheal tissues were performed. Inflammatory mediators were measured in lung tissues by using ELISA. The chemical composition of the particulate material revealed a large quantity of the phthalic acid ester, high concentrations of phenolic compounds, anthracene and polycyclic aromatic hydrocarbons (PAH). Histological analysis showed a reduction in subjacent conjunctive tissue in the trachea, lung inflammation with inflammatory infiltrate formation and reduction of alveolar spaces and a significant increase (p<0.05) in the release of IL-1α, IL-1β, IL-6, and INF-γ in the group treated with PM10 when compared to the control group. We concluded that the burning sugarcane residues release many particles, which have toxic chemical compounds. The micro-particulate matter can induce alterations in the respiratory system.

Electrochemical impedance spectroscopy investigation of the electrochemical behaviour of copper coated with artificial patina layers and submitted to wet and dry cycles

Due to rain events historical monuments exposed to the atmosphere are frequently submitted to wet and dry cycles. During drying periods wetness is maintained in some confined regions and the corrosion product layer, generally denominated patinas, builds up and gets thicker. The aim of this study is to use electrochemical impedance spectroscopy (EIS) to investigate the electrochemical behaviour of pure copper coated with two artificial patina layers and submitted either to continuous or to intermittent immersion tests, this latter aiming to simulate wet and dry cycles. The experiments were performed in 0.1 mol dm(-3) NaCl solution and in artificial rainwater containing the most significant pollutants of the city of Sao Paulo. The results of the continuous immersion tests in the NaCl solution have shown that the coated samples behave like a porous electrode with finite pore length. On the other hand, in the intermittent tests a porous electrode response with semi-infinite pore length can be developed. The results were interpreted based on the model of de Levie and a critical comparison with previous interpretations reported in the literature for similar systems is presented. (C) 2011 Elsevier Ltd. All rights reserved.

MODELING ELECTRODIALYSIS AND A PHOTOCHEMICAL PROCESS FOR THEIR INTEGRATION IN SALINE WASTEWATER TREATMENT

Oxidation processes can be used to treat industrial wastewater containing non-biodegradable organic compounds. However, the presence of dissolved salts may inhibit or retard the treatment process. In this study, wastewater desalination by electrodialysis (ED) associated with an advanced oxidation process (photo-Fenton) was applied to an aqueous NaCl solution containing phenol. The influence of process variables on the demineralization factor was investigated for ED in pilot scale and a correlation was obtained between the phenol, salt and water fluxes with the driving force. The oxidation process was investigated in a laboratory batch reactor and a model based on artificial neural networks was developed by fitting the experimental data describing the reaction rate as a function of the input variables. With the experimental parameters of both processes, a dynamic model was developed for ED and a continuous model, using a plug flow reactor approach, for the oxidation process. Finally, the hybrid model simulation could validate different scenarios of the integrated system and can be used for process optimization.

Use of SECM to study the electrochemical behavior of DIN 1.4575 superferritic stainless steel aged at 475 degrees C

In order to lower the excessive costs of metallic prosthesis materia Is alternatives to Ti and Ti alloys have been searched. in this study, the corrosion resistance of the DIN 1.4575 superferritic stainless steel, either solution annealed or solution annealed and aged at 475 degrees C for periods varying from 100 to 1080 h, was investigated by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization methods in Hanks` solution. The solution annealed and the aged for 1080 h samples were also tested using scanning electrochemical microscopy (SECM) in a 0.1 mol/L NaCl solution at 25 degrees C. The EIS results showed that the corrosion resistance of the DIN 1.4575 steel decreases with heat treatment time at 475 degrees C probably due to alpha prime formation. Besides the diminution of the overall impedance values, the low frequency limit of the Nyquist diagrams show a progressive change from an almost capacitive response to a resistive behavior as the heat treatment time increases. Pitting corrosion resistance also decreased with aging time at 475 degrees C.

Influence of cerium (IV) ions on the mechanism of organosilane polymerization and on the improvement of its barrier properties

In this work, the effect of cerium (IV) ammonium nitrate (CAN) addition on the polymerization of bis-[triethoxysilyl]ethane (BTSE) film applied on carbon steel was studied. The electrochemical characterization of the films was carried out in 0.1 mol L(-1) NaCl solution by open-circuit potential measurements, anodic and cathodic polarization curves and electrochemical impedance spectroscopy (EIS). Morphological and chemical characterization were performed by atomic force microscopy (AFM), contact angle measurements, infrared-spectroscopy, nuclear magnetic resonance and thermogravimetric analysis. The results have clearly shown the improvement on the protective properties of the Ce(4+) modified film as a consequence of the formation of a more uniform and densely reticulated silane film. A mechanism is proposed to explain the accelerating role of Ce(4+) ions on the cross-linking of the silane layer. (C) 2008 Elsevier Ltd. All rights reserved.

Electrochemical study of modified non-functional bis-silane layers on Al alloy 2024-T3

In the last few years great efforts have been made in order to find and to develop environmentally friendly substitutes for Cr6+ pre-treatments applied on aluminium alloys used in the aircraft industry. Among the potential substitutes, silane layers have attracted considerable interest from researchers and from the industry. The present work investigates the anti-corrosion behaviour of (bis-1, 2-(triethoxysilyl) ethane (BTSE)) silane layers modified with Ce ions and/or silica nanoparticles applied on Al alloy 2024-T3 substrates. The corrosion behaviour was investigated in 0.1 M NaCl solution via d.c. polarization and electrochemical impedance spectroscopy (EIS). Contact angle measurements and XPS were used to assess information on the chemistry of the silane pre-treated surfaces. The results have shown that the introduction of additives improves the corrosion protection properties of the silane layer. (c) 2008 Elsevier Ltd. All rights reserved.

Root Water Extraction under Combined Water and Osmotic Stress

Using a numerical implicit model for root water extraction by a single root in a symmetric radial flow problem, based on the Richards equation and the combined convection-dispersion equation, we investigated some aspects of the response of root water uptake to combined water and osmotic stress. The model implicitly incorporates the effect of simultaneous pressure head and osmotic head on root water uptake, and does not require additional assumptions (additive or multiplicative) to derive the combined effect of water and salt stress. Simulation results showed that relative transpiration equals relative matric flux potential, which is defined as the matric flux potential calculated with an osmotic pressure head-dependent lower bound of integration, divided by the matric flux potential at the onset of limiting hydraulic conditions. In the falling rate phase, the osmotic head near the root surface was shown to increase in time due to decreasing root water extraction rates, causing a more gradual decline of relative transpiration than with water stress alone. Results furthermore show that osmotic stress effects on uptake depend on pressure head or water content, allowing a refinement of the approach in which fixed reduction factors based on the electrical conductivity of the saturated soil solution extract are used. One of the consequences is that osmotic stress is predicted to occur in situations not predicted by the saturation extract analysis approach. It is also shown that this way of combining salinity and water as stressors yields results that are different from a purely multiplicative approach. An analytical steady state solution is presented to calculate the solute content at the root surface, and compared with the outputs of the numerical model. Using the analytical solution, a method has been developed to estimate relative transpiration as a function of system parameters, which are often already used in vadose zone models: potential transpiration rate, root length density, minimum root surface pressure head, and soil theta-h and K-h functions.

A study on stress corrosion cracking and hydrogen embrittlement of AZ31 magnesium alloy

The stress corrosion cracking (SCC) behavior and pre-exposure embrittlement of AZ31 magnesium alloy have been studied by slow strain rate tensile (SSRT) tests in this paper. It is showed that AZ31 sheet material is susceptible to SCC in distilled water, ASTM D1.387 solution, 0.01 M NaCl and 0.1 M NaCl solution. The AZ31 magnesium alloy also becomes embrittled if pre-exposed to 0.01 M NaCl solution prior to tensile testing. The degree of embrittlement increased with increasing the pre-exposure time, It is proposed that both the pre-exposure embrittlement and SCC were due to hydrogen which reduces the cohesive strength. i,e,. hydrogen embrittlement, (c) 2005 Elsevier B.V. All rights reserved.

Unexpected clobetasol propionate profile in human stratum corneum after topical application in vitro

Purpose. The validity of using drug amount-depth profiles in stratum corneum to predict uptake of clobetasol propionate into stratum corneum and its transport into deeper skin layers was investigated. Methods. In vitro diffusion experiments through human epidermis were carried out using Franz-type glass diffusion cells. A saturated solution of clobetasol propionate in 20% (V/V) aqueous propylene glycol was topically applied for 48 h. Steady state flux was calculated from the cumulative amount of drug permeated vs. time profile. Epidermal partitioning was conducted by applying a saturated drug solution to both sides of the epidermis and allowing time to equilibrate. The tape stripping technique was used to define drug concentration-depth profiles in stratum corneum for both the diffusion and equilibrium experiments. Results. The concentration-depth profile of clobetasol propionate in stratum corneum for the diffusion experiment is biphasic. A logarithmic decline of the drug concentration over the first four to five tape strips flattens to a relatively constant low concentration level in deeper layers. The drug concentration-depth profile for the equilibrium studies displays a similar shape. Conclusions. The shape of the concentration-depth profile of clobetasol propionate is mainly because of the variable partitioning coefficient in different stratum corneum layers.

Parasites in stool samples in the environment of Ilha da Marambaia, Rio de Janeiro, Brazil: an approach in public health

This research aimed to describe the frequency of parasites in stool samples in the environment of Ilha da Marambaia, Rio de Janeiro, Brazil. One hundred and five stool samples were collected and processed by the coproparasitological techniques ethyl acetate sedimentation and centrifuge-flotation using saturated sugar solution. Parasites were detected in 81.9% of the samples, hookworm being the most prevalent, followed by Trichuris vulpis. Ascaris sp. eggs were also found. A high level of evolutive forms of parasites with public health risk was found in stool samples of the environment studied. We propose that health education programs, allied to an improvement of human and animal health care, must be employed to reduce the environmental contamination.

Influence of physical exercise and sodium intake on arterial pressure and cardiac hypertrophy in rats

Evidence shows that cardiac hypertrophy (CH) is a risk factor for many cardiovascular diseases. Several stimuli may cause CH-like manifestations and promote volume or pressure overload. Exercise-induced cardiac hypertrophy is an expected adaptation to regular exercise training. Salt intake has been shown to be the most important determinant of blood pressure in different populations. The purpose of the present work was to verify the influence of physical exercise and sodium intake on the blood pressure and myocardium. The study was performed on 36 rats divided into six groups: Group I (diet without salt overload), Group II (diet without salt overload and swimming), Group III (diet with 2.5% NaCl solution and swimming), Group IV (diet with 5% NaCl solution and swimming), Group V (diet with 2.5% NaCl solution without exercise), Group VI (diet with 5% NaCl solution without exercise). The arterial pressure was significantly lower in Group I when compared with Group IV. The ratio of cardiac mass/body mass was increased in Groups III and IV. In conclusion, there was evidence that exercise training and NaCl intake promotes arterial hypertension and cardiac hypertrophy.

Comportamento tribológico de biocompósitos de matriz de titânio

Dissertação de mestrado integrado em Engenharia de Materiais