Comparison of Roadside Crash Injury Metrics using Event Data Recorders

The occupant impact velocity (OIV) and acceleration severity index (ASI) are competing measures of crash severity used to assess occupant injury risk in full-scale crash tests involving roadside safety hardware, e.g. guardrail. Delta-V, or the maximum change in vehicle velocity, is the traditional metric of crash severity for real world crashes. This study compares the ability of the OIV, ASI, and delta-V to discriminate between serious and non-serious occupant injury in real world frontal collisions. Vehicle kinematics data from event data recorders (EDRs) were matched with detailed occupant injury information for 180 real world crashes. Cumulative probability of injury risk curves were generated using binary logistic regression for belted and unbelted data subsets. By comparing the available fit statistics and performing a separate ROC curve analysis, the more computationally intensive OIV and ASI were found to offer no significant predictive advantage over the simpler delta-V.

The Effects of Airbags and Seatbelts on Occupant Injury in Longitudinal Barrier Crashes

Introduction: Longitudinal barriers, such as guardrails, are designed to prevent a vehicle that leaves the roadway from impacting a more dangerous object while minimizing the risk of injury to the vehicle occupants. Current full-scale test procedures for these devices do not consider the effect of occupant restraints such as seatbelts and airbags. The purpose of this study was to determine the extent to which restraints are used or deployed in longitudinal barrier collisions and their subsequent effect on occupant injury. Methods: Binary logistic regression models were generated to predict occupant injury risk using data from the National Automotive Sampling System / Crashworthiness Data System from 1997 through 2007. Results: In tow-away longitudinal barrier crashes, airbag deployment rates were 70% for airbag-equipped vehicles. Compared with unbelted occupants without an airbag available, seat belt restrained occupants with an airbag available had a dramatically decreased risk of receiving a serious (MAIS 3+) injury (odds-ratio (OR)=0.03; 95% CI: 0.004- 0.24). A similar decrease was observed among those restrained by seat belts, but without an airbag available (OR=0.03; 95% CI: 0.001- 0.79). No significant differences in risk of serious injuries were observed between unbelted occupants with an airbag available compared with unbelted occupants without an airbag available (OR=0.53; 95% CI=0.10-2.68). Impact on Industry: This study refutes the perception in the roadside safety community that airbags rarely deploy in frontal barrier crashes, and suggests that current longitudinal barrier occupant risk criteria may over-estimate injury potential for restrained occupants involved in a longitudinal barrier crash.

Secondary Collisions Revisited: Real-World Crash Characteristics and Relationship to Crash Test Criteria

Previous research conducted in the late 1980’s suggested that vehicle impacts following an initial barrier collision increase severe occupant injury risk. Now over twenty-five years old, the data used in the previous research is no longer representative of the currently installed barriers or US vehicle fleet. The purpose of this study is to provide a present-day assessment of secondary collisions and to determine if full-scale barrier crash testing criteria provide an indication of secondary collision risk for real-world barrier crashes. The analysis included 1,383 (596,331 weighted) real-world barrier midsection impacts selected from thirteen years (1997-2009) of in-depth crash data available through the National Automotive Sampling System (NASS) / Crashworthiness Data System (CDS). For each suitable case, the scene diagram and available scene photographs were used to determine roadside and barrier specific variables not available in NASS/CDS. Binary logistic regression models were developed for second event occurrence and resulting driver injury. Barrier lateral stiffness, post-impact vehicle trajectory, vehicle type, and pre-impact tracking conditions were found to be statistically significant contributors toward secondary event occurrence. The presence of a second event was found to increase the likelihood of a serious driver injury by a factor of seven compared to cases with no second event present. Twenty-four full-scale crash test reports were obtained for common non-proprietary US barriers, and the risk of secondary collisions was determined using recommended evaluation criteria from NCHRP Report 350. It was found that the NCHRP Report 350 exit angle criterion alone was not sufficient to predict second collision occurrence for real-world barrier crashes.

Nueva disposición de sistemas de contención de vehículos en medianas de autovía: New practices for median barriers of highways

La siniestralidad por salida izquierda de vía en carreteras de gran capacidad es un problema que, además de las dramáticas situaciones a las que da lugar, inflige a la sociedad elevados costes. Por ello, debe prestarse una intensa atención al diseño de las medianas y a la disposición de barreras en ellas, con el objetivo de evitar que se produzcan este tipo de accidentes y limitar las consecuencias de los que aún así tengan lugar. Habitualmente las medianas de autovías se diseñan aplicando casi sistemáticamente los parámetros mínimos exigidos normativamente y generalmente con barreras de seguridad adosadas o muy próximas a uno de los arcenes interiores. Sin embargo, tanto las recomendaciones técnicas nacionales como la bibliografía internacional recomiendan llevar a cabo un estudio económico de alternativas antes que colocar barreras y, si está justificada su disposición, alejarla de la calzada disponiéndola próxima al eje de la mediana. En esta tesis se analizan las ventajas y limitaciones que tiene la disposición de barrera próxima al eje de la mediana. Se ha investigado sobre el comportamiento de los vehículos al circular por la mediana y se muestra cómo se ha instalado en la obra de la autovía A‐40, Tramo: Villarrubia de Santiago‐Santa Cruz de la Zarza, destacando los aspectos más novedosos y llamativos pero que se ajustan a las mejores prácticas en la materia y también a la normativa de aplicación. ABSTRACT Many dramatic situations are caused by cross‐median traffic accidents which imply high costs for society, both in human and economic terms. It is therefore important that special attention should be paid to the design of highway medians and to the installation of safety barriers so as to avoid these kinds of incidents and to reduce their consequences. Highway median are usually designed with the application of minimum parameters, according to regulations, with the installation of safety barriers against or close to the inside border. However, Spanish technical regulations and international bibliography recommend a prior study to be carried out with the purpose of finding alternatives to this installation of safety barriers and if necessary, the installation of the safety barrier close to the centre of the median. This thesis directs its analysis towards the advantages and restrictions of installing the safety barrier close to the centre of the median. Research has shown vehicle response when within the median and we show the installation of safety barriers in the A‐40 highway stretch: Villarrubia de Santiago – Santa Cruz de la Zarza, highlighting the aspects that should be taken into account as best practices for road safety and technical regulations.

Water Sensitive Urban Design (WSUD) application auditing

Background WSUD implementation in the Gold Coast City Council area commenced more than a decade ago. As a result, Council is expected to be in possession of WSUD assets valued at over tens of million dollars. The Gold Coast City Council is responsible for the maintenance and long-term management of these WSUD assets. Any shortcoming in implementation of best WSUD practices can potentially result in substantial liabilities and ineffective expenditure for the Council in addition to reduced efficiencies and outcomes. This highlights the importance of periodic auditing of WSUD implementation. Project scope The overall study entailed the following tasks: * A state-of-the-art literature review of the conceptual hydraulic and water quality treatment principles, current state of knowledge in relation to industry standards, best practice and identification of knowledge gaps in relation to maintenance and management practices and potential barriers to the implementation of WSUD. * Council stakeholder interviews to understand current practical issues in relation to the implementation of WSUD and the process of WSUD application from development application approval to asset management. * Field auditing of selected WSUD systems for condition assessment and identification of possible strengths and weaknesses in implementation. * Review of the Land Development Guidelines in order to identify any gaps and to propose recommendations for improvement. Conclusions Given below is a consolidated summary of the findings of the study undertaken. State-of-the-art literature review Though the conceptual framework for WSUD implementation is well established, the underlying theoretical knowledge underpinning the treatment processes and maintenance regimes and life cycle costing are still not well understood. Essentially, these are the recurring themes in the literature, namely, the inadequate understanding of treatment processes and lack of guidance to ensure specificity of maintenance regimes and life cycle costing of WSUDs. The fundamental barriers to successful WSUD implementation are: * Lack of knowledge transfer – This essentially relates to the lack of appropriate dissemination of research outcomes and the common absence of protocols for knowledge transfer within the same organisation. * Cultural barriers – These relate to social and institutional factors, including institutional inertia and the lack of clear understanding of the benefits. * Fragmented responsibilities – This results from poor administrative integration within local councils in relation to WSUDs. * Technical barriers – These relate to lack of knowledge on operational and maintenance practices which is compounded by model limitations and the lack of long-term quantitative performance evaluation data. * Lack of engineering standards – Despite the availability of numerous guidelines which are non-enforceable and can sometimes be confusing, there is a need for stringent engineering standards. The knowledge gaps in relation to WSUDs are only closing very slowly. Some of the common knowledge gaps identified in recent publications have been recognised almost a decade ago. The key knowledge gaps identified in the published literature are: * lack of knowledge on operational and maintenance practices; * lack of reliable methodology for identifying life cycle issues including costs; * lack of technical knowledge on system performance; * lack of guidance on retrofitting in existing developments. Based on the review of barriers to WSUD implementation and current knowledge gaps, the following were identified as core areas for further investigation: * performance evaluation of WSUD devices to enhance model development and to assess their viability in the context of environmental, economic and social drivers; establishing realistic life cycle costs to strengthen maintenance and asset management practices; * development of guidelines specific to retrofitting in view of the unique challenges posed by existing urban precincts together with guidance to ensure site specificity; establishment of a process for knowledge translation for enhancing currently available best practice guidelines; * identification of drivers and overcoming of barriers in the areas of institutional fragmentation, knowledge gaps and awareness of WSUD practices. GCCC stakeholder interviews Fourteen staff members involved in WSUD systems management in the Gold Coast City Council, representing four Directorates were interviewed using a standard questionnaire. The primary issues identified by the stakeholders were: * standardisation of WSUD terminology; * clear protocols for safeguarding devices during the construction phase; * engagement of all council stakeholders in the WSUD process from the initial phase; * limitations in the Land Development Guidelines; * ensuring public safety through design; * system siting to avoid conflicts with environmental and public use of open space; * provision of adequate access for maintenance; * integration of social and ecosystem issues to ensure long-term viability of systems in relation to both, vandalism and visual recreation; * lack of performance monitoring and inadequacy of the maintenance budget; * lack of technical training for staff involved in WSUD design approvals and maintenance; incentives for developers for acting responsibly in stormwater management. Field auditing of WSUD systems A representative cross section of WSUD systems in the Gold Coast were audited in the field. The following strengths and weaknesses in WSUD implementation were noted: * The implementation of WSUD systems in the field is not consistent. * The concerns raised by the stakeholders during the interviews in relation to WSUD implementation was validated from the observations from the field auditing, particularly in relation to the following: * safeguarding of devices during the construction phase * public safety * accessibility for maintenance * lack of performance monitoring by Council to assess system performance * inadequate maintenance of existing systems to suit site specific requirements. * A treatment train approach is not being consistently adopted. * Most of the systems audited have satisfactorily catered for public safety. Accessibility for maintenance has been satisfactorily catered for in most of the systems that were audited. * Systems are being commissioned prior to construction activities being substantially completed. * The hydraulic design of most systems appears to be satisfactory. * The design intent of the systems is not always clear. Review of Land Development Guidelines The Land Development Guidelines (TDG) was extensively reviewed and the following primary issues were noted in relation to WSUD implementation: * the LDG appears to have been prepared primarily to provide guidance to developers. It is not clear to what extent the guidelines are applicable to Council staff involved in WSUD maintenance and management; * Section 13 is very voluminous and appears to be a compilation of a series of individual documents resulting in difficulties in locating specific information, a lack of integration and duplication of information; * the LDG has been developed with a primary focus on new urban precinct development and the retrofitting of systems in existing developments has not been specifically discussed; * WSUDs are discussed in two different sections in the LDG and it is not clear which section takes precedence as there are inconsistencies between the two sections; there is inconsistent terminology being used; * there is a need for consolidation of information provided in different sections in the LDG; * there are inconsistencies in the design criteria provided; * there is a need for regular updating of the LDG to ensure that the information provided encompasses the state-of-the-art; * there is limited guidance provided for the preparation of maintenance plans and life cycle costing to assist developers in asset handover and to assist Council staff in assessment. * Based on these observations, eleven recommendations have been provided which are discussed below. Additionally, the stakeholder provided the following specific comments during the interviews in relation to the LDG: * lack of flexibility to cover the different stages of the life cycle of the systems; * no differentiation in projects undertaken by developers and Council; * inadequate information with regards to safety issues such as maximum standing water depth, fencing and safety barriers and public access; * lack of detailed design criteria in relation to Crime Prevention through Environmental Design, safety, amenity, environment, surrounding uses and impacts on surroundings; * inadequate information regarding maintenance requirements specific to the assessment and compliance phases; * recommendations for plantings are based primarily on landscape requirements rather than pollutant uptake capability. Recommendations With regards to the Land Development Guidelines, the following specific recommendations are provided: 1. the relevant sections and their extent of applicability to Council should be clearly identified; 2. integration of the different subsections within Section 13 and re-formatting the document for easy reference; 3. the maintenance guidelines provided in Section 13 should be translated to a maintenance manual for guidance of Council staff; 4. should consider extending the Guidelines to specifically encompass retrofitting of WSUD systems to existing urban precincts; 5. Section 3 needs to be revised to be made consistent with Section 13, to ensure priority for WSUD practices in urban precincts and to move away from conventional stormwater drainage design such as kerb and channelling; 6. it would also be good to specify as to which Section takes predominance in relation to stormwater drainage. It is expected that Section 13 would take predominance over the other sections in the LDG; 7. terminology needs to be made consistent to avoid confusion among developers and Council staff. Water Sensitive Urban Design is the term commonly used in Australia for stormwater quality treatment, rather than Stormwater Quality Improvement Devices. This once again underlines the need for ensuring consistency between Section 3 and Section 13; 8. it would also be good if there is a glossary of commonly used terms in relation to WSUD for use by all stakeholders and which should also be reflected in the LDG; 9. consolidation of all WSUD information into one section should be considered together with appropriate indicators in other LDG Sections regarding the availability of WSUD information. Ensuring consistency in the information provided is implied; 10. Section 13 should be updated at regular intervals to ensure the incorporation of the latest in research outcomes and incorporating criteria and guidance based on the state-of-the-art knowledge. The updating could be undertaken, say, in five year cycles. This would help to overcome the current lack of knowledge transfer; 11. the Council should consider commissioning specialised studies to extend the current knowledge base in relation to WSUD maintenance and life cycle costing. Additionally, Recommendation 10 is also applicable in this instance. The following additional recommendations are made based on the state-of-the-art literature review, stakeholder interviews and field auditing of WSUD systems: 1. Performance monitoring of existing systems to assess improvements to water quality, identify modifications and enhancements to improve performance; 2. Appropriate and monitored maintenance during different phases of development of built assets over time is needed to investigate the most appropriate time/phase of development to commission the final WSUD asset. 3. Undertake focussed investigations in the areas of WSUD maintenance and asset management in order to establish more realistic life cycle costs of systems and maintenance schedules; 4. the engagement of all relevant Council stakeholders from the initial stage of concept planning through to asset handover, and ongoing monitoring. This close engagement of internal stakeholders will assist in building a greater understanding of responsibilities and contribute to overcoming constraints imposed by fragmented responsibilities; 5. the undertaking of a public education program to inform the community of the benefits and ecosystem functions of WSUD systems; 6. technical training to impart state-of-the-art knowledge to staff involved in the approval of designs and maintenance and management of WSUD projects; 7. during the construction phase, it is important to ensure that appropriate measures to safeguard WSUD devices are implemented; 8. risks associated with potential public access to open water zones should be minimised with the application of appropriate safety measures; 9. system siting should ensure that potential conflicts are avoided with respect to public and ecosystem needs; 10. integration of social and ecosystem issues to ensure long-term viability of systems; provide incentives to developers who are proactive and responsible in the area of stormwater management.

Identification methods of key contributing factors in crashes with high numbers of fatalities and injuries in China

Objectives In China, “serious road traffic crashes” (SRTCs) are those in which there are 10-30 fatalities, 50-100 serious injuries or a total cost of 50-100 million RMB ($US8-16m), and “particularly serious road traffic crashes” (PSRTCs) are those which are more severe or costly. Due to the large number of fatalities and injuries as well as the negative public reaction they elicit, SRTCs and PSRTCs have become great concerns to China during recent years. The aim of this study is to identify the main factors contributing to these road traffic crashes and to propose preventive measures to reduce their number. Methods 49 contributing factors of the SRTCs and PSRTCs that occurred from 2007 to 2013 were collected from the database “In-depth Investigation and Analysis System for Major Road traffic crashes” (IIASMRTC) and were analyzed through the integrated use of principal component analysis and hierarchical clustering to determine the primary and secondary groups of contributing factors. Results Speeding and overloading of passengers were the primary contributing factors, featuring in up to 66.3% and 32.6% of accidents respectively. Two secondary contributing factors were road-related: lack of or nonstandard roadside safety infrastructure, and slippery roads due to rain, snow or ice. Conclusions The current approach to SRTCs and PSRTCs is focused on the attribution of responsibility and the enforcement of regulations considered relevant to particular SRTCs and PSRTCs. It would be more effective to investigate contributing factors and characteristics of SRTCs and PSRTCs as a whole, to provide adequate information for safety interventions in regions where SRTCs and PSRTCs are more common. In addition to mandating of a driver training program and publicisation of the hazards associated with traffic violations, implementation of speed cameras, speed signs, markings and vehicle-mounted GPS are suggested to reduce speeding of passenger vehicles, while increasing regular checks by traffic police and passenger station staff, and improving transportation management to increase income of contractors and drivers are feasible measures to prevent overloading of people. Other promising measures include regular inspection of roadside safety infrastructure, and improving skid resistance on dangerous road sections in mountainous areas.

Uso seguro de opioides no paciente queimado: proposta de barreiras pela enfermagem

A tese desenvolvida neste estudo é que a depressão respiratória em pacientes queimados que utilizam opiódes como terapeutica farmacológica da dor, pode ser prevenida por meio de ações de enfermagem que identifiquem os fatores predisponentes para a depressão respiratória, que considerem na rotina de aprazamento da terapeutica farmacológica da dor, as características farmacológicas dos medicamentos, para evitar interações medicamentosas e que monitorem adequadamente o paciente queimado para identificar precocemente sinais de depressão respiratória. Para tanto, este estudo teve como objetivo desenvolver barreiras de segurança com foco em ações de enfermagem, para prevenção de depressão respiratória em pacientes queimados em uso de opióides. Trata-se de um estudo restrospectivo, em que foram analisados 272 prontuários de pacientes queimados internados em um Centro de Tratamento de Queimados (CTQ), de um hospital público federal de grande porte, no município do Rio de Janeiro. nos anos de 2011 a 2013. Dentre os 272 prontuários 42 atenderam os critérios de seleção da pesquisa, e destes, em 28,58% (n=12) foi identificada a ocorrência de depressão respiratória. Predominaram pacientes adultos jovens do sexo masculino. O óbito predominou no grupo com DR, assim como, queimaduras de 2 e 3 graus, e superfície corporal queimada com mediana de 50%. Os fatores predominantes para depressão respiratória foram insuficiencia renal, hipoalbuminemia e hipertensão arterial. Na terapia medicamentosa dos pacientes queimados, os analgésicos opióides são os mais utilizados, predominando o tramadol (45,49%) e a metadona (18,45%). Diazepam é o benzodiazepínico de escolha, entre os antidepressivos a imipramina é o mais utilizado, apesar de classificada como anticonvulsivantes a gabapentina, nos queimados é utilizada em dose analgésica. Tanto no grupo de pacientes com ou sem DR, os horários de adiministração de medicamentos que predominaram foram 22h e 06h. Foi evidenciado PIM em 66,6% dos pacientes estudados. A associação entre a ocorrência de PIM e a DR demonstrou-se positiva; os pacientes com que apresentaram PIM têm 2,5 vezes mais risco de apresentar DR. Os pares de medicamentos prevalentes e que apresentaram PIM no grupo com DR foram, metadona com diazepam (n=5), tramadol com fentanil (4), metadona com impramina e metadona com tramadol (n=3). No grupo sem DR foram metadona e tramadol (n=8), tramadol com fentanil (4), e metadona com diazepam (3). As vias oral e intravenosa predominaram nos pacientes com e sem DR, e não houve associação positiva entre a administração por essas vias e a oorrência de DR, constatando-se que a via de administração não é tão relevante para a DR. Nos pacientes com DR, 83,3% apresentaram PIM, principalmente nos horários 22h e 06h, horários próximos aos de ocorrência de DR. Espera-se que este estudo contribua para a segurança medicamentosa no uso de opióides, e na prevenção do eventos adverso grave como a depressão respiratória em pacientes queimados.

Estudio de estabilidad de barreras de contención hidráulicas mediante tomografia eléctrica y placa de carga en Zaragoza

El objetivo del presente proyecto es definir las actuaciones encaminadas a restaurar el sistema actual de defensa del río Ebro en el tramo Pradilla de Ebro- Boquiñeni (Zaragoza), con el propósito de reducir el riesgo por inundaciones en los núcleos de población del mismo nombre, para lo que se ha realizado una campaña de reconocimiento del Terreno mediante técnicas geofísicas. La campaña de prospección ha consistido en la realización de perfiles de tomografía eléctrica para determinar la distribución de los niveles geoeléctricos en la zona obteniéndose la profundidad y variabilidad del nivel freático y la distribución aparente de los niveles biológicos. En base a las anomalías detectadas en las secciones de resistividad se han llevado a cabo ensayos in situ con placa de carga dinámica con el fin de determinar las características portantes de las barreras. La correlación de ambos estudios permite localizar las zonas de debilidad estructural para así poder establecer las recomendaciones oportunas de cara a restaurar los diques de protección, de forma que puedan cumplir con su función de contención frente a los caudales de crecida. ABSTRACT The aim of this project is so define the interventions required to restore the current defense system of Ebro River in the stretch between Pradilla de Ebro and Boquiñeni (Zaragoza), in order to reduce flood risk in the population centers of the same name, for what a soil survey has been done using geophysical techniques. The geophysical prospecting campaign has consisted on the realization of electrical tomography profiles to determine the distribution of due geoelectric levels in the area, the depth and variability of the water table and the distribution of apparent lithology level. Based on anomalies detected in resistivity sections, dynamic loading plate test were carried out in situ in order to determine the load bearing characteristics of the safety barriers. The correlation o f both studies makes possible to locate die areas o f structural weakness, with the objective of establishing appropriate recommendations to restore the embankments so that they can meet their retaining functions against flood flows.

Post-fracture behavior of laminated plates after human impact test

For safety barriers the load bearing capacity of the glass when subjected to the soft body impact should be verified. The soft body pendulum test became a testing standard to classify safety glass plates. The classification of the safety glass do not consider the structural behavior when one sheet of a laminated glass is broken; in situations when the replacement of the plate could not be very urgent, structural behavior should be evaluated. The main objective of this paper is to present the structural behavior o laminated glass plates, though modal test and human impact test, including the post fracture behavior for the laminated cases. A god reproducibility and repeatability is obtained. Two main aspects of the structural behavior can be observed: the increment of the rupture load for laminated plates after the failure of the first sheet, and some similarities with a tempered monolithic behavior of equivalent thickness.

Vortex-induced vibrations on bridges : the interaction mechanism in complex sections and a new proposed semi-empirical model

El presente trabajo de investigación se ocupa del estudio de las vibraciones verticales inducidas por vórtices (VIV) en aquellos puentes que, por sus características geométricas y propiedades dinámicas, muestran cierta sensibilidad este tipo de fenómeno aeroelástico. El objeto principal es el análisis del mecanismo de interacción viento-estructura sobre secciones no fuseladas de geometría simple, con objeto de realizar una adecuada caracterización del problema y poder abordar posteriormente el análisis de otras secciones de geometría más compleja, representativas de los principales elementos estructurales de los puentes, como arcos, tableros, torres y pilas. Este aspecto es fundamental durante la fase de diseño del puente, donde deberán tenerse en cuenta también una serie de detalles que pueden influir significativamente su sensibilidad ante problemas aerodinámicos, como la morfología y dimensiones principales de la sección transversal del tablero, la disposición de barreras de seguridad y barreras cortaviento, o las riostras que unen diferentes elementos estructurales. La configuración de dos elementos en tándem o la construcción de un puente en las inmediaciones de otro existente son otros aspectos a considerar respecto a la sensibilidad frente a efectos aeroelásticos. El estudio se ha llevado a cabo principalmente mediante la implementación de simulaciones numéricas que reproducen la interacción entre la corriente de aire y secciones representativas de modelos estructurales, a partir de un código CFD basado en el método de las partículas de vórtices (VPM), siguiendo por tanto un esquema Lagrangiano. Los resultados han sido validados con datos experimentales existentes, valores procedentes de ensayos en túnel de viento y registros reales a partir de diferentes casos de estudio: Alconétar (2006), Niterói (1980), Trans- Tokyo Bay (1995) y Volgogrado (2010). Finalmente, se propone un modelo semi-empírico para la estimación del rango de velocidades críticas y amplitudes de oscilación basado en la utilización de las derivadas de flameo de Scanlan, y la densidad espectral de las fuerzas aerodinámicas en el dominio de la frecuencia. The present research work concerns the study of vertical vortex-induced vibrations (VIV) in bridges which show certain sensitivity to this type of aeroelastic phenomenon. It focuses on the analysis of the wind-structure interaction mechanism on bluff sections, with the objective of making a good characterisation of the problem and subsequently addressing the analysis of sections with a complex geometry, which are representative of the bridge structural elements, such as arches, decks, towers and piers. This issue is of relative importance during the bridge design phase, since minor details of the aforementioned elements can significantly influence its sensitivity to aerodynamic problems. The shape and main dimensions of the deck cross section, the addition of safety barriers and windshields, the presence of braces to enhance the structure mechanical properties, the utilisation of cross sections in tandem arrangement, or the erection of a new bridge in the vicinity of another existing one are some of the aspects to be considered regarding the sensitivity to the aeroelastic effects. The study has been carried out mainly through the implementation of numerical simulations that reproduces the interaction between the airflow and the representative cross section of a structural bridge model, by the use of a CFD code based on the vortex particle method (VPM), thus following a Lagrangian scheme. The results have been validated with existing experimental data, values from wind tunnel tests and full scale observations from the different case studies: Alconétar (2006), Niterói (1980), Trans-Tokyo Bay (1995) and Volgograd (2010). Finally, a new semi-empirical model is proposed for the estimation of the critical wind velocity ranges and oscillation amplitudes based on the use of the Scanlan’s flutter derivatives and the power spectral density of aerodynamic force time history in the frequency domain.

Guardrail testing program II: final report.

Federal Highway Administration, Eastern Federal Lands Highway Division, Sterling, Va.

Evaluation of LS-DYNA wood material model 143 /

"HRDI-04/08-05(1M)E"--P. [4] of cover.

Dispositivos de segurança em infraestruturas rodoviárias: critérios de aplicação

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Vias de Comunicação e Transportes

Beyond the barriers : road construction safety issues from the office and the roadside

Conceptually, the management of safety at roadworks can be seen in a three level framework. At the regulatory level, roadworks operate at the interface between the work environment, governed by workplace health and safety regulations, and the road environment, which is subject to road traffic regulations and practices. At the organizational level, national, state and local governments plan and purchase road construction and maintenance which are then delivered in-house or tendered out to large construction companies who often subcontract multiple smaller companies to supply services and labor. At the operational level, roadworks are difficult to isolate from the general public, hindering effective occupational health and safety controls. This study, from the State of Queensland, Australia, examines how well this tripartite framework functions. It includes reviews of organizational policy and procedures documents; interviews with 24 subject matter experts from various road construction and maintenance organizations, and on-site interviews with 66 road construction personnel. The study identified several factors influencing the translation of safety policies into practice including the cost of safety measures in the context of competitive tendering, lack of firm evidence of the effectiveness of safety measures, and pressures to minimize disruption to the travelling public.

Identification of barriers to and facilitators for the implementation of occupational road safety initiatives

To explore potential barriers to and facilitators for implementing occupational road safety initiatives, in-depth interviews were conducted with personnel from four major Australian organizations. Twenty-four participants were involved in the interviews comprising 16 front line employees and eight managers. The interviews identified that employees perceived six organizational characteristics as potential barriers to implementing occupational road safety initiatives. These included: prioritisation of production over safety; complacency towards occupational road risks; insufficient resources; diversity; limited employee input in safety decisions; and a perception that road safety initiatives were an unnecessary burden. Of these organizational characteristics, prioritisation of production over safety and complacency were the most frequently cited barriers. In regards to facilitators, participants perceived three organizational characteristics as potential facilitators to implementing occupational road safety initiatives. These included: management commitment; the presence of existing systems that could support the implementation of initiatives; and supportive relationships. Of these organizational characteristics, management commitment was the most frequently cited facilitator.