Biodiesel etílico filtrado de óleo residual de soja: desempenho de um trator agrícola na operação de gradagem

Filtered ethyl ester biodiesel from residual soybean oil: performance of an agricultural tractor in the disk harrow operation. This test was conducted to evaluate the performance of an agricultural tractor using a mixture of biodiesel and petroleum diesel. The experiment was conducted at FCAV-Unesp, Jaboticabal, using a 4x2 AFWD tractor with 73.6 kW (100 hp @ 2,300 rpm) of power in the motor, pulling a disk harrow. The biodiesel used was of the ethyl type, filtered, and produced from residual soybean oil. The experimental design was completed randomized in factorial scheme (4x5), with 20 treatments and 4 repetitions, in which 5 ratios of biodiesel and petroleum diesel mixtures were combined (0 and 100%, 25 and 75%, 50 and 50%, 75 and 25% and 100 and 0%), with 4 displacement runs. The analyzed variables were traction bar power, engine rotation and displacement speed. The results evidenced that the mixture ratio (biodiesel and petroleum diesel) did not compromise tractor performance until the limit of 50%.

Development of mint (Mentha piperita L.) grown on biosolids: evaluation of productivity and essential oil content

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Screening and confirmation of PAHs in vegetable oil samples by use of supercritical fluid extraction in conjunction with liquid chromatography and fluorimetric detection

A fast, simple, non-destructive method for the direct screening of polycyclic aromatic hydrocarbons (PAHs) in vegetable oil samples is proposed. The method uses a supercritical fluid extraction (SFE) system coupled on-line with a fluorimetric detector to determine PAHs. This special assembly avoids the main problems encountered in the determination of PAHs in complex matrices such as vegetable oils. PAHs are selectively extracted by using silica gel in the thimble and cleaned up by passage through a C18 column. Interferences are preferentially retained by the silica gel during the SFE process while PAHs are adsorbed in the C18 column and the remainder of the matrix is sent to waste. Finally, the C18 column is purged to remove residual CO2 gas and adsorbed PAHs are recovered by desorption with a solvent. The extracts from positive samples are subsequently analyzed by liquid chromatography (LC) with fluorescence detection. The proposed method allows the confirmation of vegetable oil safety and hence provides a new tool for consumer protection. (C) 2004 Elsevier B.V. All rights reserved.

Influence of grinding on the roundness, residual stresses and microstructure of VC131 steel analysed by varying the type of cutting fluid

This paper by R. E. Catai, E. C. Bianchi, P. R de Águia and M. C. Alves reports on the results of an analysis made of roundness errors, residual stresses, and SEM micrographs of VC131 steel. The analysis involved workpieces ground with two types of cutting fluid: synthetic cutting fluid and emulsive oil. In this study, the cutting parameters were kept constant while the type of cutting fluid was varied. The amount of cutting fluid injected in the process was also varied, aiming to identify the ideal amount required to obtain good results without causing structural damage to the workpiece. The SEM analyses of roundness errors and residual stresses revealed that, of the two cutting fluids, emulsive oil provided better tensions due to its greater lubricating power.

Desempenho dinâmico de um trator agrícola utilizando biodiesel destilado de óleo residual

The objective of this study was to evaluate the dynamic performance of an agricultural tractor utilizing distilled biodiesel (50% ethylic + 50% methylic) as a function of the proportion of biodiesel and diesel of petroleum (0 and 100%, 5 and 95%, 15 and 85%, 25 and 75%, 50 and 50%, 75 and 25% and 100 and 0%), respectively. This research was done in the area of the Department of Rural Engineering of the Paulista State University (UNESP), Jaboticabal Campus, SP, located in the latitude 21° 14′ 28″ S and longitude 48° 17′12″ W. A tractor 4 x 2 FWA was used, with a 73.6 kW (100 HP) motor and a ballast tractor. The biodiesel used was produced from spent oil from food frying. The experimental design was entirely randomized, with 7 treatments and 5 repetitions, totaling 35 observations. The results showed that the biodiesel and diesel blend significantly influenced the hourly volumetric consumption, hourly mass consumption, fuel consumption per worked area and specific fuel consumption variables. When the tractor operated with 100% of biodiesel (B100) the specific fuel consumption increased 18% on average in relation to diesel (B0).

Use of soybean oil fry waste for economical biosurfactant production by isolated Pseudomonas aeruginosa using response surface methodology

The present study sought biotensoactive production from soybean oil fry waste using Pseudomonas aeruginosa ATCC 10145 and Pseudomonas aeruginosa isolated from the soil of a petroleum station having undergone gasoline and diesel oil spills. The results of the experiments were analyzed using a complete factorial experimental design, investigating the concentration of soybean oil waste, ammonia sulfate and residual brewery yeast. Assays were performed in 250-mL Erlenmeyer beakers containing 50 mL of production medium, maintained on a rotary shaker at 200 rpm and a temperature of 30±1 °C for a 48-hour fermentation period. Biosurfactant production was monitored through the determination of rhamnose, surface tension and emulsification activity. The Pseudomonas aeruginosa ATCC 10145 strain and isolated Pseudomonas aeruginosa were able to reduce the surface tension of the initial mexlium from 61 mN/m to 32.5 mN/m and 30.0 mN/m as well as produce rhamnose at concentrations of 1.96 and 2.89 g/L with emulsification indices of 96% and 100%, respectively.

Morphological and cytochemical changes in synganglion of Rhipicephalus sanguineus (Latreille, 1806) (Acari: Ixodidae) female ticks from exposure of andiroba oil (Carapa guianensis)

Actually, the most used method to control ticks is synthetic acaricides with neurotoxic action. However, the use of these methods presents inconveniences, such as the contamination of the environment and risks to the host's health due to the residual effects. Thus, several studies have been developed aiming to find alternative ways to control these ectoparasites, such as the use of natural compounds with active ingredients, which act controlling some species of plagues in addition to presenting medicinal properties that are beneficial to humans. The present study aimed to analyze the action of andiroba oil (Carapa guianensis) on the synganglion of Rhipicephalus sanguineus semiengorged females through morphological and cytochemical techniques aiming to verify if this natural product have neurotoxic action as the numerous synthetic acaricides. The results showed that andiroba oil interferes in the synganglion through structural and enzymatic changes, which lead the nervous tissue to apoptotic death involving autophagy. Among these changes was observed the emergence of large empty spaces between the perineurium and the cortical region, vacuolated cortex cells and with cell swelling, neural cells with picnotic nuclei or in initial stage of chromatin margination and neuropile with high structural disorganization. Considering these data, it can be concluded that andiroba seed oil can be used as an alternative method in the control of R. sanguineus ticks due to its neurotoxic action. © 2013 Wiley Periodicals, Inc.

Enzymatic transesterification of soybean oil with ethanol using lipases immobilized on highly crystalline PVA microspheres

Polyvinyl alcohol (PVA) microspheres with different degree of crystallinity were used as solid supports for Rhizomucor miehei lipase immobilization, and the enzyme-PVA complexes were used as biocatalysts for the transesterification of soybean oil to fatty acid ethyl esters (FAEE). The amounts of immobilized enzyme on the polymeric supports were similar for both the amorphous microspheres (PVA4) and the high crystalline microspheres (PVA25). However, the enzymatic activity of the immobilized enzymes was depended on the crystallinity degree of the PVA microspheres: enzymes immobilized on the PVA4 microspheres have shown low enzymatic activity (6.13 U mg-1), in comparison with enzymes immobilized on the high crystalline PVA25 microspheres (149.15 U mg-1). A synergistic effect was observed for the enzyme-PVA25 complex during the transesterification reaction of soybean oil to FAEE: transesterification reactions with free enzyme with the equivalent amount of enzyme that were immobilized onto the PVA25 microspheres (5.4 U) have yielded only 20% of FAEE, reactions with the pure highly crystalline microsphere PVA25 have not yielded FAEE, however reactions with the enzyme-PVA25 complexes have yielded 66.3% of FAEE. This synergistic effect of an immobilized enzyme on a polymeric support has not been observed before for transesterification reaction of triacylglycerides into FAEE. Based on ATR-FTIR, 23Na- and 13C-NMR-MAS spectroscopic data and the interaction of the polymeric network intermolecular hydrogen bonds with the lipases residual amino acids a possible explanation for this synergistic effect is provided. © 2013 Elsevier Ltd. All rights reserved.

Produção de biodiesel a partir de óleo residual reciclado e realização de testes comparativos com outros tipos de biodiesel e proporções de mistura em um moto-gerador

Pós-graduação em Engenharia Mecânica - FEIS

Efeito de genótipos de feijoeiro, óleo de nim em diferentes formulações e período residual no controle de Zabrotes subfasciatus (Boheman, 1833)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Craqueamento termocatalítico do óleo de fritura residual

Neste trabalho foi estudado o processo de craqueamento termocatalítico do óleo de fritura nas escalas de bancada e piloto, variando-se o percentual do catalisador carbonato de sódio de 5 e 10% m/m em relação a matéria prima utilizada e temperatura de 440 ºC. O objetivo foi obter misturas de hidrocarbonetos ricas na fração diesel. O óleo de fritura neutralizado e seco foi caracterizado em relação ao Índice de Acidez, Índice de saponificação, Viscosidade Cinemática, Densidade e Índice de Refração. Após o craqueamento, o produto líquido obtido foi purificado por decantação da fase aquosa e filtração simples em escala de bancada. Esse produto foi fracionado por destilação fracionada e os condensados foram coletados em um funil de decantação de acordo a faixa de destilação da gasolina (40ºC-175ºC), querosene (175ºC-235ºC), diesel leve (235°C-305ºC) e diesel pesado (305ºC-400 ºC). Foi realizada a caracterização tanto físico química quanto da composição dos produtos líquidos e suas respectivas frações. Também foi realizada a evolução do processo de craqueamento em escala piloto, acompanhando o comportamento das características físico químicas e de composição do produto formado no decorrer do processo de craqueamento. Os resultados mostraram que o catalisador carbonato de sódio forneceu produtos de baixa acidez e com boas características para uso como combustível. A variação do percentual de catalisador influencia significamente as propriedades físico químicas e composição tanto do produto quanto de suas frações. Verificou-se, ainda, que o craqueamento termocatalítico do óleo de fritura propicia a formação de hidrocarbonetos ricos na fração do diesel (19,16% diesel leve e 41,18% diesel pesado para o teste com 10% de Na₂CO₃ e de 13,53% leve e 52,73% diesel pesado para o teste com 5% de Na₂CO₃ ). Os intervalos de tempos finais do craqueamento geram um combustível com baixo teor de acidez e com propriedades físico químicas em conformidade a norma especificada para o diesel mineral.

Extraction of oil from pressed palm oil (Elaes guineensis) fibers using supercritical CO2

Residual fibers from palm oil production are a good source of carotene, since they contain more than 5% of the original oil, with about 5000 ppm of carotenoids. As carotenoids are thermosensitive molecules, supercritical CO₂ can be used for oil recovery, because this technique employs low temperatures. In this work results of oil extraction experiments from pressed palm oil fibers are shown. Fibers were from AGROPALMA, an industry which is located in Tailândia (Pará, Brazil). Extractions were carried out at 200, 250 and 300 bar and at temperatures of 45 and 55oC. Oil was analyzed by UV/vis spectrophotometry for total carotene determination. Results showed a large increase in extraction rate from 200 to 250 bar and a small variation from 250 to 300 bar. The total amount of carotenes did not increase in the course of extraction at 300 bar, but it showed a large increase at 200 and at 250 bar. Free fatty acids are present in amounts larger than those found in commercial oils.

Metodologia de análise de risco de investimento em projetos de eficiência energética com aplicação no aproveitamento da biomassa residual do dendê na Amazônia

A promoção das energias renováveis, como estratégias para mitigar as alterações climáticas é um grande desafio mundial, principalmente para países em desenvolvimento como Brasil que busca diversificar sua matriz energética a partir de fontes renováveis, mas possui restrições de custo de investimentos. Neste contexto, são necessárias ferramentas que mensurem os riscos de investimento em projetos de fontes de energia renovável. Este trabalho contribui para o desenvolvimento sustentável da Amazônia através do desenvolvimento de uma metodologia de análise de risco de investimento em projetos de eficiência energética aplicada no aproveitamento da biomassa do dendê. A crescente produção de dendê na região amazônica para geração de produtos alimentícios e biodiesel está gerando um grande volume de biomassa. Verificou-se que a utilização do resíduo da biomassa de dendê para a geração de energia e comercialização no mercado aumenta o seu valor econômico, para tanto se identificou os Critérios e Indicadores (C&I) de sustentabilidade da cadeia do dendê agrupando-os em: econômicos, ambientais, sociais e técnicos. Qualificando e quantificando os riscos que afetam os indicadores identificados. A metodologia desenvolvida foi analisada em três cenários futuros de crescimento econômico para o Brasil que foram construídos balizados nos cenários contidos no Plano Nacional de Energia 2030.

Vegetable Oil Derived Solvent, and Catalyst Free Click Chemistry'' Thermoplastic Polytriazoles

Azide-alkyne Huisgen click chemistry provides new synthetic routes for making thermoplastic polytriazole polymers-without solvent or catalyst. This method was used to polymerize three diester dialkyne monomers with a lipid derived 18 carbon diazide to produce a series of polymers (labelled C18C18, C18C9, and C18C4 based on monomer chain lengths) free of residual solvent and catalyst. Three diester dialkyne monomers were synthesized with ester chain lengths of 4, 9, and 18 carbons from renewable sources. Significant differences in thermal and mechanical properties were observed between C18C9 and the two other polymers. C18C9 presented a lower melting temperature, higher elongation at break, and reduced Young's modulus compared to C18C4 and C18C18. This was due to the odd-even effect induced by the number of carbon atoms in the monomers which resulted in orientation of the ester linkages of C18C9 in the same direction, thereby reducing hydrogen bonding. The thermoplastic polytriazoles presented are novel polymers derived from vegetable oil with favourable mechanical and thermal properties suitable for a large range of applications where no residual solvent or catalyst can be tolerated. Their added potential biocompatibility and biodegradability make them ideal for applications in the medical and pharmaceutical industries.

Aplicações sucessivas de lodo de esgoto no girassol e efeito residual no trigo e triticale

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)