Ultrasonographic Evaluation of Achilles Tendon Repair After Percutaneous Sectioning for the Correction of Congenital Clubfoot Residual Equinus

Background: Most cases of congenital clubfoot treated with the Ponseti technique require percutaneous Achilles tenotomy to correct the residual equinus. Clinical evidence suggests that complete healing occurs between the cut tendon stumps, but there have not yet been any detailed studies investigating this reparative process. This study was performed to assess Achilles tendon repair after percutaneous section to correct the residual equinus of clubfoot treated with the Ponseti method. Method: A prospective study analyzed 37 tenotomies in 26 patients with congenital clubfoot treated with the Ponseti technique, with a minimum follow-up of 1 year after the section. The tenotomy was performed percutaneously with a large-bore needle bevel with patient sedation and local anesthesia. Ultrasonographic scanning was performed after section to ascertain that the tenotomy had been completed and to measure the stump separation. In the follow-up period, the reparative process was followed ultrasonographically and assessed at 3 weeks, 6 months, and 1 year posttenotomy. Results: The ultrasonography performed immediately after the procedure showed that in some cases, residual strands between the tendon ends persisted, and these were completely sectioned under ultrasound control. A mean retraction of 5.65 mm +/- 2.26 mm (range, 2.3 to 11.0 mm) between tendon stumps after section was observed. Unusual bleeding occurred in one case and was controlled by digital pressure, with no interference with the final treatment. After 3 weeks, ultrasonography showed tendon repair with the tendon gap filled with irregular hypoechoic tissue, and also with transmission of muscle motion to the heel. Six months after tenotomy, there was structural filling with a fibrillar aspect, mild or moderate hypoechogenicity, and tendon scar thickening when compared with a normal tendon. One year after tenotomy, ultrasound showed a fibrillar structure and echogenicity at the repair site that was similar to a normal tendon, but with persistent tendon scarring thickness. Conclusions: There is a fast reparative process after Achilles tendon percutaneous section that reestablishes continuity between stumps. The reparative tissue evolved to tendon tissue with a normal ultrasonographic appearance except for mild thickening, suggesting a predominantly intrinsic repair mechanism.

Distribution of Hemoglobin Phenotypes in Four Different Districts of Porto Velho, Rondonia, Brazil

Hemoglobin profile studies have been carried out in four samples from different districts of Porto Velho (Rondonia State) in the western Amazonian region of Brazil: Candelaria, Bate Estaca, Hemeron (at the State Blood Bank), and Sao Carlos. Samples from 337 unrelated individuals were collected during medical and paramedical team visits by professionals from the Instituto de Pesquisa em Patologia Tropical and the Centro de Pesquisa em Patologias Tropicais (both research institutes in tropical diseases). The aim of this study is to assess the frequency of alleles in the hemoglobin system, mainly alleles HB*A, *S, and *E. The overall phenotype frequencies were FIB A,S = 0.025, HB A,E = 0.006, and HB A,A = 0.969. Samples from the blood bank subjects and samples from the homogeneous areas of Silo Carlos and Candelaria plus Bate Estaca have a chi-square of heterogeneity of 6.383 (p = 0.041) and 8.406 (p = 0.015), respectively. The allele frequencies (HB*A = 0.984, HB*S = 0.012, and HB*E = 0.003) do not significantly differ from frequencies found in other Brazilian regions.

Oleic acid modulation of the immune response in wound healing: A new approach for skin repair

Injury triggers inflammatory responses and tissue repair. Several treatments are currently in use to accelerate healing: however, more efficient formulations are still needed for specific injuries. Since unsaturated fatty acids modulate immune responses, we aimed to evaluate their therapeutic effects on wound healing. Skin wounds were induced in BALB/c mice and treated for 5 days with n-3, n-9 fatty acids or vehicle (control). n-9 treated mice presented smaller wounds than control and n-3 at 120 h post-surgery (p.s.). Collagen III mRNA,TIMP1 and MMP9 were significantly elevated in n-9 group compared to n-3 or vehicle at 120 h p.s. Among the inflammatory mediators studied we found that IL-10, TNF-alpha and IL-17 were also higher in n-9 treated group compared to n-3 or vehicle at 120 h p.s. Interestingly, COX2 had decreased expression on wound tissue treated with n-9. Inflammatory infiltrate analysis revealed diminished frequency of CD4(+), CD8(+) and CD11b(+) cells in n-9 wounds at 24 and 120 h p.s., which was not related to cell death, since in vitro apoptosis experiments did not show any cell damage after fatty acids administration. These results suggested that unsaturated fatty acids, specifically n-9, modulate the inflammation in the wound and enhance reparative response in vivo. n-9 may be a useful tool in the treatment of cutaneous wounds. (C) 2010 Elsevier GmbH. All rights reserved.

LOW-INTENSITY ULTRASOUND APPLICATION IN DISTAL RADIUS METAPHYSEAL BONE DEFECTS OF DOGS

We assessed the repair of transverse, 3-mm wide bone gaps created at the distal radius in 28 dogs that were randomly divided into two 14-animal groups; one was the control group and the other received a daily, 20-min application of low-intensity pulsed ultrasound for 100 days. Sequential radiographs, histomorphometrics, bone fluorescent histology and bone vascularity assessments found that all animals from both groups obtained a stage of hypertrophic-type nonunion with fibrocartilage tissue formation throughout the region of osteotomy. However, treated animals exhibited areas of endochondral ossification within the fibrocartilage region. There was no difference in type of vascularity or the newly formed bone process obtained by tetracycline labeling. Application of low-intensity ultrasound was not capable of significantly changing the reparative process and it may not be sufficiently powerful to overcome a combination of local deleterious effects on bone healing, created by gapping, excessive motion and periosteal resection. (E-mail: jbvolpon@fmrp.usp.br) (C) 2010 World Federation for Ultrasound in Medicine & Biology.

Consequences of traumatic injury in fossil and recent dipnoan dentitions

Traumatic injury to the dentition of dipnoans, indirectly as a result of jaw fracture, or directly from damage to the tooth tissues, is present throughout the history of this group, in fossil and in Recent material. Bones heal, but traces of the injury are retained in the tooth tissues, permanently if the proliferative regions of the tooth plate are injured, or until the damaged dentines are removed by wear if the growing regions are left intact. Lack of resorption and repair of damaged dental hard tissues in dipnoans has implications for some models of tooth plate growth in lungfish with a permanent dentition, because this indicates that lungfish tooth plates may not have the capacity to form reparative dentine as part of the normal growth processes.

Avaliação de genótipos de cana-de-açúcar para início de safra na microrregião Centro de Pernambuco

As diferentes respostas dos genótipos de cana-de-açúcar (Saccharum spp.), em relação à produtividade, quando submetidos a mudanças nos diferentes ciclos de colheita, representam problema para os agricultores e grande desafio para os melhoristas, sendo de interesse comum a identificação e obtenção de variedades que apresentem como características alta produtividade agroindustrial, ampla estabilidade, longevidade e excelente viabilidade econômica em sua exploração comercial. Objetivou-se, com este trabalho, avaliar o desempenho agroindustrial de 11 clones e 15 variedades de cana-de-açúcar, na microrregião canavieira da Zona Centro de Pernambuco, considerando-se os cultivos de cana planta, soca e ressoca, e eleger os genótipos mais produtivos. O experimento foi conduzido na área agrícola da Usina Petribú, município de Lagoa de Itaenga. Utilizou-se o delineamento experimental de blocos casualizados, com quatro repetições. Foram avaliadas as variáveis toneladas de pol por hectare (TPH), toneladas de cana por hectare (TCH), fibra (FIB), pol % corrigida (PCC), pureza (PZA), teor de sólidos solúveis (BRIX) e açúcar total recuperável (ATR). Pela análise de variância, foram detectadas diferenças significativas entre os genótipos, indicando variabilidade genética. A alta estimativa da herdabilidade média para a variável TCH indicou elevada possibilidade de êxito na seleção, baseando-se neste importante componente de produção. Por meio da análise econômica, constata-se que as variedades RB92579 e RB93509 apresentam melhor desempenho para colheita no início da safra.

Reforço de estruturas de betão armado com compósitos de fibra de carbono

O relatório resulta do estágio realizado na empresa Sika Brasil, no âmbito da Unidade Curricular de DIPRE do Mestrado de Engenharia Civil do Instituto Superior de Engenharia do Porto. A área de especialidade incidiu na recuperação e reforço de estruturas (Target Market Refurbishment), onde se deu a oportunidade de aprofundar conhecimentos em reforço estrutural através do sistema de reforço com compósitos de fibra de carbono (CFRP) colado exteriormente (EBR - Externally Bonded Reinforcement). O estágio realizado permitiu uma abordagem com a gama de produtos de recuperação e reforço da Sika Brasil, sendo que houve um foco muito grande nos produtos que respeitam ao reforço estrutural com compósitos de fibra de carbono. Este documento visa várias etapas do estágio, relacionadas diretamente com o reforço estrutural com CFRP. Foi feito um levantamento teórico das características dos compósitos de fibra de carbono, dando a conhecer os materiais envolvidos no sistema, as suas propriedades mecânicas e o seu âmbito de aplicação. No sentido de ter um diálogo profícuo com os projetistas e aplicadores de sistemas compósitos de fibra, foi realizada uma análise do procedimento de cálculo para o dimensionamento de reforço CFRP, à luz do Bulletin 14 fib:01 (2001), bem como uma análise da situação de incêndio para os sistemas compósitos. Consta neste documento uma análise feita entre os principais fornecedores de sistemas de CFRP no Brasil, baseando-se a mesma no conteúdo das fichas técnicas de produto relativas ao sistema de reforço EBR e respetiva comparação com a informação necessária para dimensionamento, de acordo com o Bulletin 14 fib:01 (2001). É relatado um reforço estrutural, como caso de estudo, tendo-se dado a oportunidade de se acompanhar desde a sua fase de projeto até à fase de execução. Por fim, este documento contém a simulação de dois programas da Sika para dimensionamento de reforço CFRP. A simulação foi feita para uma viga submetida a esforço de flexão, com as características geométricas e solicitações previamente definidas.

Atomic force microscopy assisted with electron and ion beam microscopy for the direct measurement of biostructures and DNA samples

Dissertation to obtain a Master degree in Biotechnology

Estudo experimental do efeito da geometria da ancoragem no comportamento ao arrancamento de varão em betão

O presente estudo experimental pretende avaliar o comportamento da aderência entre varões em aço nervurado e o betão, a influência da geometria, do estado de fendilhação do betão e da presença de um varão transversal na zona de ancoragem, no comportamento desta. O bom desempenho das estruturas de betão armado depende da sua ligação e aderência entre os diferentes materiais utilizados na sua conceção, aço e betão. Foi com esse pressuposto que a presente dissertação avançou, de forma a serem estudadas as diversas geometrias e condições a que podem estar sujeitas as ancoragens. Para isso, foram elaborados e ensaiados dezasseis modelo de ancoragem: seis modelos em betão fendilhado e dez modelos em betão não fendilhado. Do estudo experimental desenvolvido, os resultados obtidos em betão não fendilhado dos ensaios de arrancamento “Pull-Out” são comparados com as recomendações NP EN 1992-1-1 [27], fib Model Code 2010 [14] e o Structural Concrete Building Code ACI 318-11 [4]. No presente estudo experimental também foi analisado o efeito da fendilhação do betão, permitindo assim compreender melhor o funcionamento e a resistência de uma ancoragem sujeita a essa situação. O efeito da presença de um varão transversal aplicado na zona do mandril foi também estudado.

Identificação das fontes de contaminação fecal nas águas superficiais do Rio Tejo

As águas são potenciais vias de infeção, pois servem como veículos para disseminação de possíveis microrganismos patogénicos que podem levar a surtos. Por isso é importante manter os ambientes aquáticos livres de microrganismos. Para isso é necessário a constante monitorização desses ambientes. Isto é realizado através da utilização de microrganismos indicadores (FIB), que sugerem o nível de poluição fecal da água. Porém, tem sido demonstrado que os FIB possuem graves falhas na identificação de certos tipos de microrganismos, como por exemplo, os vírus, assim como na identificação da fonte de contaminação fecal. A partir disso surgiu o Microbial Source Tracking (MST), que tem como objetivo principal a identificação específica do hospedeiro ou ambiente causador da contaminação fecal. Neste estudo foram utilizadas uma combinação de diferentes métodos, sendo a maioria destas técnicas moleculares, para fornecer uma nova abordagem prática, viável e integrável a partir da utilização das amostras ambientais retiradas do Rio Tejo. Para isso foram efetuadas colheitas totalizando 73 amostras em quatro pontos diferentes no rio Tejo: VFX, MPN, ALC e Belém. Nestes pontos foram analisados quantitativamente os marcadores bacteriológicos E. coli e EF; os considerados potenciais indicadores de vírus, CS e Bacteriófagos de GB-124 e marcadores moleculares HAdV, mtDNA humano, bovino, suíno e de aves de consumo humano. Foram encontradas positividades para todos os pontos, com 99% para E. coli, 97% para EF, 99% para CS, 1% para Bacteriófagos de GB-124, 40% para HAdV, 90% para mtDNA humano, 92% mtDNA bovino, 58% mtDNA suíno, 37% mtDNA de aves de consumo humano. Estes marcadores foram também correlacionados, e devido à fraca correlação encontrada, os resultados indicam que as informações fornecidas pelos indicadores bacteriológicos e CS são diferentes das informações obtidas pelos indicadores moleculares.

Terapia celular com células mesenquimais por via intracoronária: contributos do estudo invasivo da microcirculação coronária

RESUMO: Introdução - A utilização de células e das suas propriedades para o tratamento das doenças cardiovasculares, é uma promessa para o futuro e talvez a única forma de ultrapassar algumas das insuficiências das terapêuticas atuais. A via de entrega das células mais utilizada na investigação tem sido a intracoronária, ganhando a microcirculação especial relevância, por ser onde ocorre a primeira interação com o tecido nativo. As células estaminais mesenquimais (CEM) têm propriedades que as tornam particularmente aptas para a Terapia Celular, mas as suas dimensões, superiores ao diâmetro dos capilares, tem motivado controvérsia quanto à sua entrega intracoronária. A cardiologia de intervenção tem atualmente técnicas que permitem a avaliação em tempo real e in vivo do estado da microcirculação coronária. A determinação do índice da resistência da microcirculação (IRM) fornece informação sobre a circulação dos pequenos vasos, de forma independente da circulação coronária e do estado hemodinâmico, mas a aplicabilidade clínica deste conhecimento encontra-se ainda por definir. Objectivos Esclarecer o potencial do IRM no estudo dos efeitos do transplante de CEM por via intracoronária. População e Métodos . Estudo pré-clínico com modelo animal (suíno) desenvolvido em 3 fases. Na Primeira Fase foram utilizados 8 animais saudáveis para estudar e validar a técnica de determinação de estudo da microcirculação. Efetuou-se a determinação do IRM com duas doses diferentes de papaverina para a indução da resposta hiperémica máxima (5 e 10 mg) e após a disfunção da microcirculação com injeção intracoronária de microesferas de embozene com 40 μm de diâmetro. Na Segunda Fase foram utilizados 18 animais saudáveis, randomizados em grupo controlo e grupo recetor de 30 x 106 CEM por via intracoronária. Foram avaliados de forma cega o IRM, a pressão aórtica, o fluxo coronário epicárdico e a ocorrência de alterações electrocardiográficas. Na Terceira Fase foram utilizados 18 animais, com enfarte agudo do miocárdio provocado (EAM), randomizados em grupo controlo, grupo recetor de CEM expandidas de forma convencional e grupo recetor de CEM expandidas com metodologia inovadora e de menores dimensões. Foi realizada uma exploração da dose/efeito com infusão faseada de 10 x 106, 15 x 106 e 20 x 106 CEM, com determinação do IRM, da pressão aórtica, do fluxo coronário epicárdico e da ocorrência de alterações eletrocardiográficas. Quatro semanas após a entrega das células foi novamente avaliado o IRM e foi efetuado o estudo anatomopatológico dos animais na procura de evidência de neoangiogénese e de regeneração miocárdica, ou de um efeito positivo da resposta reparadora após o enfarte. Resultados Nas 3 fases todos os animais mantiveram estabilidade hemodinâmica e eletrocardiográfica, com exceção da elevação de ST de V1-V3 verificada após a injeção das microesferas. Na Primeira Fase as duas doses de papaverina induziram uma resposta hiperémica eficaz, sem tradução com significado na determinação do IRM (variação da pressão distal de - 11,4 ± 5 e de - 10,6± 5 mmHg com as doses de 5 e 10 mg respetivamente (p=0,5). Com a injeção das microesferas o IRM teve uma elevação média de 310 ± 190 %, para um valor médio de 41,3 ± 16 U (p = 0,001). Na Segunda Fase não houve diferenças significativas dos parâmetros hemodinâmicos, do fluxo epicárdico e da avaliação eletrocardiográfica entre os dois grupos. O IRM de base foi semelhante e após a infusão intracoronária observou-se uma elevação expressiva do IRM nos animais que receberam células em comparação com o grupo controlo (8,8 U ± 1 vs. 14,2 U ± 1,8, P=0,02) e quanto ao seu valor de base (aumento de 112%, p=0,008). Na terceira Fase não houve novamente diferenças significativas dos parâmetros hemodinâmicos, do fluxo epicárdico e da avaliação eletrocardiográfica entre os três grupos. Houve uma elevação do IRM nos animais que receberam células a partir da 2ª dose (72% nas células convencionai e 108% nas células inovadoras) e que se manteve com a 3ª dose (100% nas células convencionais e 88% nas inovadoras) com significado estatístico em comparação com o grupo controlo (p=0,034 com a 2ªdose e p=0,024 com a 3ª dose). Quatro semanas após a entrega das CEM observou-se a descida do IRM nos dois grupos que receberam células, para valores sobreponíveis aos do grupo controlo e aos valores pós-EAM. Na avaliação anatomopatológica e histológica dos corações explantados não houve diferenças entre os três grupos. Conclusões O IRM permite distinguir alterações da microcirculação coronária motivadas pela entrega intracoronária de CEM, na ausência de alterações de outros parâmetros clínicos da circulação coronária utilizados em tempo real. As alterações do IRM são progressivas e passíveis de avaliar o efeito/dose, embora não tenha sido possível determinar diferenças com os dois tipos de CEM. No nosso modelo a injeção intracoronária não se associou a evidência de efeito benéfico na reparação ou regeneração miocárdica após o EAM.---------------------------- ABSTRACT: ABSTRACT Introduction The use of cells for the treatment of cardiovascular disease is a promise for the future and perhaps the only option to overcome some of the shortcomings of current therapies. The strategy for the delivery of cells most often used in current research has been the intracoronary route and due to this microcirculation gains special relevance, mainly because it is the first interaction site of transplanted cells with the native tissue. Mesenchymal stem cells (MSC) have properties that make them suitable for Cell Therapy, but its dimensions, larger than the diameter of capillaries, have prompted controversy about the safety of intracoronary delivery. The interventional cardiology currently has techniques that allow for real-time and in vivo assessment of coronary microcirculation state. The determination of the index of microcirculatory resistance index (IMR) provides information about small vessels, independently of the coronary circulation and hemodynamic status, but the clinical applicability of this knowledge is yet to be defined. Objectives To clarify the potential use of IMR in the study of the effects of MSC through intracoronary transplantation. Population and Methods Preclinical study with swine model developed in three phases. In Phase One 8 healthy animals were used to study and validate the IMR assessment in our animal model. IMR was assessed with two different doses of papaverine for inducing the maximal hyperaemic response (5 and 10 mg) and microcirculation dysfunction was achieved after intracoronary injection with embozene microspheres with 40 μm in diameter. In Phase Two we randomized 18 healthy animals divided between the control group and the one receiving 30 x 106 MSC through an intracoronary infusion. There we blindly evaluated IMR, the aortic pressure, the epicardial coronary flow and the occurrence of ECG changes. In Phase Three we used 18 animals with a provoked acute myocardial infarction (AMI), randomized into a control group, a MSC expanded conventionally receiver group and a MSC expanded with an innovative methodology receiver group. There was a stepwise infusion with doses of 10 x 106, 15 x 106 and 20 x 106 MSC with determination of IMR, the aortic pressure, the epicardial coronary flow and occurrence of electrocardiographic abnormalities. Four weeks after cell delivery we again measured the IMR and proceeded with the pathological study of animals in the search for evidence of neoangiogenesis and myocardial regeneration, or a positive effect in the reparative response following the infarction. Results All animals remained hemodynamically stable and with no electrocardiographic abnormalities, except for the ST elevation in V1-V3 observed after injection of the microspheres. In Phase One the two doses of papaverine achieved an hyperemic and effective response without significant differences in IMR (variation of the distal pressure -11.4 ± 5 and -10.6 ± 5 mmHg with the doses of 5 and 10 mg respectively (p = 0.5). With the injection of the microspheres the IMR had an average increase of 310 ± 190% for an average value of 41.3 ± 16 U (p = 0.001). In the second phase there were no significant differences in hemodynamic parameters, epicardial flow and electrocardiographic assessment between the two groups. The baseline IMR was similar and after intracoronary infusion there was a significant increase in animals receiving cells compared with the control group (8.8 ± U 1 vs. 14.2 ± 1.8, p = 0.02) and with their baseline (112% increase, p = 0.008). In the third phase again there were no significant differences in hemodynamic parameters, the epicardial flow and electrocardiographic evaluation between the three groups. There was a significant increase in IMR in animals that received cells from the 2nd dose (72% in conventional cells and 108% in the innovative cells) that remained with the 3rd dose (100% in conventional cells and 88% in the innovative) with statistical significance compared with the control group (p = 0.034 with 2nd dose, p = 0.024 with 3rd dose). Four weeks after delivery of the MSC we observed the fall of the IMR in the two groups that received cells with values overlapping those of the control group. In pathological and histological evaluation of removed hearts there were no differences among the three groups. Conclusions The IMR allows for the differentiation of changes in coronary microcirculation motivated by intracoronary delivery of MSC in the absence of modification in other clinical parameters. IMR changes are progressive and enable the evaluation of the effect / dose, though it has not been possible to determine differences in the two types of MSC. In our model, intracoronary injection of MSC was not associated with evidence of repair or myocardial regeneration after AMI.

Assessment of the effectiveness of steel fibre reinforcement for the punching resistance of flat slabs by experimental research and design approach

The present paper deals with the experimental assessment of the effectiveness of steel fibre reinforcement in terms of punching resistance of centrically loaded flat slabs, and to the development of an analytical model capable of predicting the punching behaviour of this type of structures. For this purpose, eight slabs of 2550 x 2550 x 150 mm3 dimensions were tested up to failure, by investigating the influence of the content of steel fibres (0, 60, 75 and 90 kg/m3) and concrete strength class (50 and 70 MPa). Two reference slabs without fibre reinforcement, one for each concrete strength class, and one slab for each fibre content and each strength class compose the experimental program. All slabs were flexurally reinforced with a grid of ribbed steel bars in a percentage to assure punching failure mode for the reference slabs. Hooked ends steel fibres provided the unique shear reinforcement. The results have revealed that steel fibres are very effective in converting brittle punching failure into ductile flexural failure, by increasing both the ultimate load and deflection, as long as adequate fibre reinforcement is assured. An analytical model was developed based on the most recent concepts proposed by the fib Mode Code 2010 for predicting the punching resistance of flat slabs and for the characterization of the behaviour of fibre reinforced concrete. The most refined version of this model was capable of predicting the punching resistance of the tested slabs with excellent accuracy and coefficient of variation of about 5%.

Influence of casting condition on the anisotropy of the fracture properties of Steel Fibre Reinforced Self-Compacting Concrete (SFRSCC)

Identification of the tensile constitutive behaviour of Fibre Reinforced Concrete (FRC) represents an important aspect of the design of structural elements using this material. Although an important step has been made with the introduction of guidance for the design with regular FRC in the recently published fib Model Code 2010, a better understanding of the behaviour of this material is still necessary, mainly for that with self-compacting properties. This work presents an experimental investigation employing Steel Fibre Self-Compacting Concrete (SFRSCC) to cast thin structural elements. A new test method is proposed for assessing the post-cracking behaviour and the results obtained with the proposed test method are compared with the ones resulted from the standard three-point bending tests (3PBT). Specimens extracted from a sandwich panel consisting of SFRSCC layers are also tested. The mechanical properties of SFRSCC are correlated to the fibre distribution by analysing the results obtained with the different tests. Finally, the stress-crack width constitutive law proposed by the fib Model Code 2010 is analysed in light of the experimental results.

Multiphasic, multistructured and hierarchical strategies for cartilage regeneration

Cartilage tissue is a complex nonlinear, viscoelastic, anisotropic, and multiphasic material with a very low coefficient of friction, which allows to withstand millions of cycles of joint loading over decades of wear. Upon damage, cartilage tissue has a low self-reparative capacity due to the lack of neural connections, vascularization, and a latent pool of stem/chondroprogenitor cells. Therefore, the healing of articular cartilage defects remains a significant clinical challenge, affecting millions of people worldwide. A plethora of biomaterials have been proposed to fabricate devices for cartilage regeneration, assuming a wide range of forms and structures, such as sponges, hydrogels, capsules, fibers, and microparticles. In common, the fabricated devices were designed taking in consideration that to fully achieve the regeneration of functional cartilage it is mandatory a well-orchestrated interplay of biomechanical properties, unique hierarchical structures, extracellular matrix (ECM), and bioactive factors. In fact, the main challenge in cartilage tissue engineering is to design an engineered device able to mimic the highly organized zonal architecture of articular cartilage, specifically its spatiomechanical properties and ECM composition, while inducing chondrogenesis, either by the proliferation of chondrocytes or by stimulating the chondrogenic differentiation  of stem/chondro-progenitor cells. In this chapter we present the recent advances in the development of innovative and complex biomaterials that fulfill the required structural key elements for cartilage regeneration. In particular, multiphasic, multiscale, multilayered, and hierarchical strategies composed by single or multiple biomaterials combined in a welldefined structure will be addressed. Those strategies include biomimetic scaffolds mimicking the structure of articular cartilage or engineered scaffolds as models of research to fully understand the biological mechanisms that influence the regeneration of cartilage tissue.

Unsupported valvuloplasty in children with congenital mitral valve anomalies. Late clinical results

OBJECTIVE: To analyze late clinical evolution after surgical treatment of children, with reparative and reconstructive techniques without annular support. METHODS: We evaluated 21 patients operated upon between 1975 and 1998. Age 4.67±3.44 years; 47.6% girls; mitral insufficiency 57.1% (12 cases), stenosis 28.6% (6 cases), and double lesion 14.3% (3 cases). The perfusion 43.10±9.50min, and ischemia time were 29.40±10.50min. The average clinical follow-up in mitral insufficiency was 41.52±53.61 months. In the stenosis group (4 patients) was 46.39±32.02 months, and in the double lesion group (3 patients), 39.41±37.5 months. The echocardiographic follow-up was in mitral insufficiency 37.17±39.51 months, stenosis 42.61±30.59 months, and in the double lesion 39.41±37.51 months. RESULTS: Operative mortality was 9.5% (2 cases). No late deaths occurred. In the group with mitral insufficiency, 10 (83.3%) patients were asymptomatic (p=0.04). The majorit y with mild reflux (p=0.002). In the follow-up of the stenosis group, all were in functional class I (NYHA); and the mean transvalve gradient varied between 8 and 12mmHg, average of 10.7mmHg. In the double lesion group, 1 patient was reoperated at 43 months. No endocarditis or thromboembolism were reported. CONCLUSION: Mitral stenosis repair has worse late results, related to the valve abnormalities and associated lesions. The correction of mitral insufficiency without annular support showed good long-term results.