Health care costs of domestic violence against women – evidence from Portugal

Our main objective is to estimate the additional health care costs to the Portuguese National Health Service (NHS) due to domestic violence against women. We collected information through a survey addressed to health care centres’ female users. Both victims and non-victims of violence were inquired. We estimate costs according to five different groups – consultation costs, health care treatment and therapeutic costs, costs of complementary and diagnostic exams, drugs costs and transport costs. The estimations have been split into two perspectives – the NHS perspective (public perspective) and private perspective of inquired women (out of pocket payments). The timeframe of our calculations is one year, referring to all costs generated by domestic violence situations in the last twelve months. Essentially costs were estimated through the product of total number of episodes by the average estimated price per episode. Additionally, for the private costs, we also considered the costs originated by income losses, the opportunity cost of time spent on health care treatments and the work inability caused by sickness. The results suggest that the victims of domestic violence’s additional demand for health care is valued €140 per annum, that is about 22% higher than health care costs of non-victims. These results match those of similar studies for the United States, taking account of per capita differences in health care spending. A large proportion (90%) of the additional costs associated with domestic violence is supported by the NHS, where consultations and drugs are the most important contributors of such costs. Health consequences of domestic violence result from losses in quality of life and worst health status of victims and correspond to additional permanent economic costs of domestic violence episodes.

Materials selection for a set of multiple parts considering manufacturing costs and weight reduction with structural isoperformance using direct multisearch optimization

Materials selection is a matter of great importance to engineering design and software tools are valuable to inform decisions in the early stages of product development. However, when a set of alternative materials is available for the different parts a product is made of, the question of what optimal material mix to choose for a group of parts is not trivial. The engineer/designer therefore goes about this in a part-by-part procedure. Optimizing each part per se can lead to a global sub-optimal solution from the product point of view. An optimization procedure to deal with products with multiple parts, each with discrete design variables, and able to determine the optimal solution assuming different objectives is therefore needed. To solve this multiobjective optimization problem, a new routine based on Direct MultiSearch (DMS) algorithm is created. Results from the Pareto front can help the designer to align his/hers materials selection for a complete set of materials with product attribute objectives, depending on the relative importance of each objective.

Technical progress and product reliability under competition and monopoly

Technical progress lowers costs and prices but appears to have an ambiguous effect on product reliabilty. This paper presents a simple model which explains this observation.

Vertical Product Differentiation, Entry-Deterrence Strategies, and Entry Qualities, September 2005

We analyze the entry of a new product into a vertically differentiated market in which an entrant and an incumbent compete in prices. Here the entry-deterrence strategies of the incumbent firm rely on “limit qualities.” With a sequential choice of quality, a quality-dependent marginal production cost, and a fixed entry cost, we relate the entry-quality decision and the entry-deterrence strategies to the level of entry cost and the degree of consumer heterogeneity. Quality-dependent marginal production costs in the model entail the possibility of inferior-quality entry as well as an incumbent’s aggressive entry-deterrence strategies of increasing its quality level toward potential entry. Welfare evaluation confirms that social welfare is not necessarily improved when entry is encouraged rather than deterred.

Managing Quality under Heterogeneous Consumer Demand and Product Quality, October 2005

Based on accepted advances in the marketing, economics, consumer behavior, and satisfaction literatures, we develop a micro-foundations model of a firm that needs to manage the quality of a product that is inherently heterogeneous in the presence of varying customer tastes or expectations for quality. Our model blends elements of the returns to quality, customer lifetime value, and service profit chain approaches to marketing. The model is then used to explain several empirical results pertaining to the marketing literature by explicitly articulating the trade-offs between customer satisfaction and costs (including opportunity costs) of quality. In this environment firms will find it optimal to allow some customers to go unsatisfied. We show that the relationship between the expected number of repeated purchases by an individual customer is endogenous to the choice of quality by the firm, indicating that the number of purchases cannot be chosen freely to estimate a customer’s lifetime value.

Markups, Gaps, and the Welfare Costs of Business Fluctuations

In this paper we present a simple theory-based measure of the variations in aggregate economic efficiency: the gap between the marginal product of labor and the household s consumption/leisure tradeoff. We show that this indicator corresponds to the inverse of the markup of price over social marginal cost, and give some evidence in support of this interpretation. We then show that, with some auxilliary assumptions our gap variable may be used to measure the efficiency costs of business fluctuations. We find that the latter costs are modest on average. However, to the extent the flexible price equilibrium is distorted, the gross efficiency losses from recessions and gains from booms may be large. Indeed, we find that the major recessions involved large efficiency losses. These results hold for reasonable parameterizations of the Frisch elasticity of labor supply, the coefficient of relative risk aversion, and steady state distortions.

Country asymmetries, endogenous product choice and the speed of trade liberalization

In a world with two countries which differ in size, we study theimpact of (the speed of) trade liberalization on firms' profitsand total welfare of the countries involved. Firms correctlyanticipate the pace of trade liberalization and take it intoaccount when deciding on their product choices, which areendogenously determined at the beginning of the game. Competitionin the marketplace then occurs either on quantities or on prices.As long as the autarkic phase continues, local firms are nationalmonopolists. When trade liberalization occurs, firms compete in aninternational duopoly. We analyze trade effects by using twodifferent models of product differentiation. Across all thespecifications adopted (and independently of the price v. quantitycompetition hypothesis), total welfare always unambiguously riseswith the speed of trade liberalization: Possible losses by firmsare always outweighed by consumers' gains, which come under theform of lower prices, enlarged variety of higher average qualitiesavailable. The effect on profits depends on the type of industryanalyzed. Two results in particular seem to be worth of mention.With vertical product differentiation and fixed costs of qualityimprovements, the expected size of the market faced by the firmsdetermines the incentive to invest in quality. The longer the periodof autarky, the lower the possibility that the firm from the smallcountry would be producing the high quality and be the leader in theinternational market when it opens. On the contrary, when trade opensimmediately, national markets do not play any role and firms fromdifferent countries have the same opportunity to become the leader.Hence, immediate trade liberalization might be in the interest ofproducers in the small country. In general, the lower the size of thesmall country, the more likely its firm will gain from tradeliberalization. Losses from the small country firm can arise when itis relegated to low quality good production and the domestic marketsize is not very small. With horizontal product differentiation (thehomogeneous good case being a limit case of it when costs ofdifferentiation tend to infinity), investments in differentiationbenefit both firms in equal manner. Firms from the small country do notrun the risk of being relegated to a lower competitive position undertrade. As a result, they would never lose from it. Instead, firms fromthe large country may still incur losses from the opening of trade whenthe market expansion effect is low (i.e. when the country is very largerelative to the other).

Effects of employment protection and product market regulations on the Italian labor market

Labor market regulations have often being blamed for high and persistentunemployment in Europe, but evidence on their impact remains mixed. Morerecently, attention has turned to the impact of product market regulationson employment growth. This paper analyzes how labor and product marketregulations interact to affect turnover and employment. We present a matchingmodel which illustrates how barriers to entry in the product market mitigatethe impact of labor market deregulation. We, then, use the Italian SocialSecurity employer-employee panel to study the interaction between barriersto entry and dismissal costs. We exploit the fact that costs for unjustdismissals in Italy increased for firms below 15 employees relative to biggerfirms after 1990. We find that the increase in dismissal costs after 1990decreased accessions and separations in small relative to big firms,especially for women. Moreover, consistent with our model, we find evidencethat the increase in dismissal costs had smaller effects on turnover for womenin sectors faced with strict product market regulations.

Markups, gaps and the welfare costs of business fluctuations

In this paper we present a simple theory-based measure of the variations in aggregate economic efficiency: the gap between the marginal product of labor and the household s consumption/leisure tradeoff. We show that this indicator corresponds to the inverse of the markup of price over social marginal cost, and give some evidence in support of this interpretation. We then show that, with some auxilliary assumptions our gap variable may be used to measure the efficiency costs of business fluctuations. We find that the latter costs are modest on average. However, to the extent the flexible price equilibrium is distorted,the gross efficiency losses from recessions and gains from booms may be large. Indeed, we find that the major recessions involved large efficiency losses. These results hold for reasonable parameterizations of the Frisch elasticity of labor supply, the coefficient of relative risk aversion, and steady state distortions.

Accounting system for activity standard costs formulation in ERP environment

Toiminnanohjausjärjestelmän implementointi ja sen mukanaan tuomat muutokset tuotekustannuslaskentaan asettavat haasteita yritykselle. Metallitoimialalla toimivassa yrityksessä on havaittu samat haasteet implementoitaessa SAP R/3 toiminnanohjausjärjestelmää ja sen tuotekustannuslaskentatoiminnallisuutta. SAP R/3 tuotekustannuslogiikka tarvitsee tietoa järjestelmän ulkopuolelta, minkä huomioimatta jättäminen vaikuttaa suoraan laskentatarkkuuteen. Diplomityössä kehitetään sekä standardoitu prosessi että laskentajärjestelmä, joiden avulla pystytään laskemaan tarvittavat niin toimintokustannukset eri teräspalvelukeskuksen kuormituspisteille kuin kustannustenvyörytysarvot. Lasketut arvot muodostavat tarvittavat tekijät SAP R/3 tuotekustannuslaskennan master dataan. Tavoitteena on edesauttaa läpinäkyvän kustannustiedon muodostumista. Diplomityö pohjautuu ns. vesiputousmalliin (SDLC). Ensin tunnistetaan reunaehdot ympäristöstä, jossa tuotekustannuslaskenta toteutetaan. Tämä asettaa joustamattomia komponentteja kehitettävälle laskentajärjestelmälle. Joustavat komponentit sen sijaan antavat vapautta laskentajärjestelmälle. Yhdistämällä joustamattomat ja joustavat komponentit saavutetaan järjestelmä, jolla voidaan täydentää SAP R/3 tuotekustannuslaskennan puutteellisuutta.

Standardizing Customized Features of a Configurable Product

Työn päätavoitteena on arvioida hissien automaattiovien usein toistuvien asiakaskohtaisesti räätälöityjen tuoteominaisuuksien vakioimisen kannattavuutta KONEen Hyvinkään tehtaalla. Työssä arvioidaan myös massaräätälöinnin periaatteiden soveltuvuutta erikoisovien toimitusprosessiin sekä toimintoperusteisen kustannustiedon tarpeellisuutta tuoteominaisuuksia koskevien päätösten teossa. Asiakaskohtaisesti räätälöity ovituotanto jaettiin kategorioihin, joiden volyymeja ja tuotemuutosten tekoon käytettyjä suunnittelutuntimääriä analysoimalla selvitettiin, muodostaako jokin räätälöitävä tuoteominaisuus riittävän suuren kappalemääräisen kysynnän tai suunnittelutuntien kulutuskohteen, jotta ominaisuuden vakiointi olisi kannattavaa. Ovien kustannusrakenne-esimerkkien avulla selvitettiin myös suunnittelun osuus kokonaiskustannuksista. Analyysien perusteella todettiin asiakaskohtaisten muutosten olevan hajanaisia ja vain muutaman ominaisuuden osalta muodostuvan tarpeeksi suuri ja yhtenäinen kokonaisuus, joka olisi taloudellisesti kannattavaavakioida. Monimutkaisen tuoterakenteen vuoksi massaräätälöinnin opit eivät ole suoraan kopioitavissa hissien erikoisovien toimitusprosessiin, mutta sisältävät hyödyllisiä toimintamalleja prosessin kehittämiseen.

Warranty Practices and Costs in the Industry of Welding Machines Manufacturing

The objective of the master’s thesis is to define the warranty practices and costs in the welding machines manufacturing company and do a proposal for a warranty policy based on the practices and costs. The study include a disquisition of the warranty practices in the subsidiaries and distributor sales. The disquisition of the warranty practices introduces the information relates to warranty period, warranty costs, including repair, spare part and other costs, the practices with the replaced parts, the utilization rate of the eWarranty system and information relates to special arrangements in the warranties. The warranty costs are defined besides the group level also separately per regions and product families. From some product families the disquisition is done per products. In this study is also done a proposal for a warranty policy for the company. The proposal speaks out the length of warranty period, the compensation of the warranty costs, the practices with replaced parts and usage of eWarranty system.

Defining a framework model to determine total costs of managed desktops using ITIL best practices

In modern day organizations there are an increasing number of IT devices such as computers, mobile phones and printers. These devices can be located and maintained by using specialized IT management applications. Costs related to a single device accumulate from various sources and are normally categorized as direct costs like hardware costs and indirect costs such as labor costs. These costs can be saved in a configuration management database and presented to users using web based development tools such as ASP.NET. The overall costs of IT devices during their lifecycle can be ten times higher than the actual purchase price of the product and ability to define and reduce these costs can save organizations noticeable amount of money. This Master’s Thesis introduces the research field of IT management and defines a custom framework model based on Information Technology Infrastructure Library (ITIL) best practices which is designed to be implemented as part of an existing IT management application for defining and presenting IT costs.

Assessment of an information product project success: case business blueprint

The objective of this study was to find out how project success can be measured in a case where the output of a project is an intangible information product, what kind of framework can be used to evaluate the project success, and how the project assessment can be done in practice. As a case example, the success of a business blueprint project was assessed from the product point of view. A framework for assessing business blueprint project success was made based on a literature review. Furthermore, separate frameworks for measuring information product quality and project costs were developed. The theory of business blueprinting was discovered not to be firmly institutionalized and it is briefly covered in the thesis. The possible net benefits from the strategic business process harmonization were noted to be much more significant than the costs of the business blueprint project. The project was seen as a sufficient success from the viewpoint of the created output.

Cost estimation framework for modular product

Cost estimation is an important, but challenging process when designing a new product or a feature of it, verifying the product prices given by suppliers or planning a cost saving actions of existing products. It is even more challenging when the product is highly modular, not a bulk product. In general, cost estimation techniques can be divided into two main groups - qualitative and quantitative techniques - which can further be classified into more detailed methods. Generally, qualitative techniques are preferable when comparing alternatives and quantitative techniques when cost relationships can be found. The main objective of this thesis was to develop a method on how to estimate costs of internally manufactured and commercial elevator landing doors. Because of the challenging product structure, the proposed cost estimation framework is developed under three different levels based on past cost information available. The framework consists of features from both qualitative and quantitative cost estimation techniques. The starting point for the whole cost estimation process is an unambiguous, hierarchical product structure so that the product can be classified into controllable parts and is then easier to handle. Those controllable parts can then be compared to existing past cost knowledge of similar parts and create as accurate cost estimates as possible by that way.