972 resultados para produção primária líquida


Relevância:

80.00% 80.00%

Publicador:

Resumo:

Top-down (grazing) and bottom-up (nutrient, light) controls are important in freshwater ecosystems regulation. Relative importance of these factors could change in space and time, but in tropical lakes bottom-up regulation has to been appointed as more influent. Present study aimed to test the hypothesis that phytoplankton growths rate in Armando Ribeiro reservoir, a huge eutrophic reservoir in semi-arid region of Rio Grande do Norte state, is more limited by nutrient available then zooplankton grazing pressure. Bioassay was conduced monthly from September (2008) to August (2009) manipulating two levels of nutrients (with/without addition) and two level of grazers (with/without removal). Experimental design was factorial 2X2 with four treatments (X5), (i) control with water and zooplankton from natural spot ( C ), (ii) with nutrient addition ( +NP ), (iii) with zooplankton remove ( -Z ) and (iv) with zooplankton remove and nutrient addition ( -Z+NP ). For bioassay confection transparent plastic bottles (500ml) was incubate for 4 or 5 days in two different depths, Secchi`s depth (high luminosity) and 3 times Secchi`s depth (low luminosity). Water samples were collected from each bottle in begins and after incubates period for chlorophyll a concentration analysis and zoopalnktonic organisms density. Phytoplankton growths rates were calculated. Bifactorial ANOVA was performance to test if had a significant effect (p<0,005) of nutrient addition and grazers remove as well a significant interaction between factors on phytoplankton growths rates. Effect magnitude was calculated the relative importance of each process. Results show that phytoplankton growth was in generally stimulated by nutrient addition, as while zooplankton remove rarely stimulated phytoplankton growth. Some significant interactions happening between nutrient additions and grazers remove on phytoplankton growth. In conclusion this study suggests that in studied reservoir phytoplankton growth is more controlled by ascendent factors than descendent

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Currently, due to part of world is focalized to petroleum, many researches with this theme have been advanced to make possible the production into reservoirs which were classified as unviable. Because of geological and operational challenges presented to oil recovery, more and more efficient methods which are economically successful have been searched. In this background, steam flood is in evidence mainly when it is combined with other procedures to purpose low costs and high recovery factors. This work utilized nitrogen as an alternative fluid after steam flood to adjust the best combination of alternation between these fluids in terms of time and rate injection. To describe the simplified economic profile, many analysis based on liquid cumulative production were performed. The completion interval and injection fluid rates were fixed and the oil viscosity was ranged at 300 cP, 1.000 cP and 3.000 cP. The results defined, for each viscosity, one specific model indicating the best period to stop the introduction of steam and insertion of nitrogen, when the first injected fluid reached its economic limit. Simulations in physics model defined from one-eighth nine-spot inverted were realized using the commercial simulator Steam, Thermal and Advanced Processes Reservoir Simulator STARS of Computer Modelling Group CMG

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Nearly 3 x 1011 m3 of medium and light oils will remain in reservoirs worldwide after conventional recovery methods have been exhausted and much of this volume would be recovered by Enhanced Oil Recovery (EOR) methods. The in-situ combustion (ISC) is an EOR method in which an oxygen-containing gas is injected into a reservoir where it reacts with the crude oil to create a high-temperature combustion front that is propagated through the reservoir. The High Pressure Air Injection (HPAI) method is a particular denomination of the air injection process applied in light oil reservoirs, for which the combustion reactions are dominant between 150 and 300°C and the generation of flue gas is the main factor to the oil displacement. A simulation model of a homogeneous reservoir was built to study, which was initially undergone to primary production, for 3 years, next by a waterflooding process for 21 more years. At this point, with the mature condition established into the reservoir, three variations of this model were selected, according to the recovery factors (RF) reached, for study the in-situ combustion (HPAI) technique. Next to this, a sensitivity analysis on the RF of characteristic operational parameters of the method was carried out: air injection rate per well, oxygen concentration into the injected gas, patterns of air injection and wells perforations configuration. This analysis, for 10 more years of production time, was performed with assistance of the central composite design. The reservoir behavior and the impacts of chemical reactions parameters and of reservoir particularities on the RF were also evaluated. An economic analysis and a study to maximize the RF of the process were also carried out. The simulation runs were performed in the simulator of thermal processes in reservoirs STARS (Steam, Thermal, and Advanced Processes Reservoir Simulator) from CMG (Computer Modelling Group). The results showed the incremental RF were small and the net present value (NPV) is affected by high initial investments to compress the air. It was noticed that the adoption of high oxygen concentration into the injected gas and of the five spot pattern tends to improve the RF, and the wells perforations configuration has more influence with the increase of the oil thickness. Simulated cases relating to the reservoir particularities showed that smaller residual oil saturations to gas lead to greater RF and the presence of heterogeneities results in important variations on the RF and on the production curves

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Many of hydrocarbon reserves existing in the world are formed by heavy oils (°API between 10 and 20). Moreover, several heavy oil fields are mature and, thus, offer great challenges for oil industry. Among the thermal methods used to recover these resources, steamflooding has been the main economically viable alternative. Latent heat carried by steam heats the reservoir, reducing oil viscosity and facilitating the production. This method has many variations and has been studied both theoretically and experimentally (in pilot projects and in full field applications). In order to increase oil recovery and reduce steam injection costs, the injection of alternative fluid has been used on three main ways: alternately, co-injected with steam and after steam injection interruption. The main objective of these injection systems is to reduce the amount of heat supplied to the reservoir, using cheaper fluids and maintaining the same oil production levels. This works discusses the use of carbon dioxide, nitrogen, methane and water as an alternative fluid to the steam. The analyzed parameters were oil recoveries and net cumulative oil productions. The reservoir simulation model corresponds to an oil reservoir of 100 m x 100 m x 28 m size, on a Cartesian coordinates system (x, y and z directions). It is a semi synthetic model with some reservoir data similar to those found in Brazilian Potiguar Basin. All studied cases were done using the simulator STARS from CMG (Computer Modelling Group, version 2009.10). It was found that waterflood after steam injection interruption achieved the highest net cumulative oil compared to other fluids injection. Moreover, it was observed that steam and alternative fluids, co-injected and alternately, did not present increase on profitability project compared with steamflooding

Relevância:

80.00% 80.00%

Publicador:

Resumo:

This thesis aims to investigate the perception and behavior of goat and sheep rural producers from Central Cabugi Region of Rio Grande do Norte state, in terms of the sector competitiveness, the cooperation mechanisms, information and environmental practices integration in the supply chain, including their customers, and also among the local producers and other institutions that support this agribusiness cluster. The research problem is related to the environmental impacts from goat and sheep breeding. This problem can also be intensified by the organization of producers in a cluster. Then, it is important to examine how the environmental issues are considered by the rural producers and their perception of their suppliers, customers and the institutions that support this activity. The methodology used in this work involved literature review of the topics of supply chain management, green supply chain, clusters development and sustainable livestock. An exploratory survey research was also conducted by personal interviews using questionnaires. Three statistic techniques were used to compile the gathered data: descriptive statistics, cluster analysis, and Chi-square tests. Two clusters were found in this study, however, the entire sample believes the sector of goat and sheep breeding is a medium competitive activity. On the other hand, for the variables of the importance of environmental practices for competitiveness , perception of environmental impacts and environmental benefits from farm vegetation management , the research found 2 distinct groups of individuals when those variables were analyzed together the green supply chain management group of variables in the cluster analysis. Beyond competitiveness perception, no degree of difference was found for the use of insecticides too. The chi-square tests present that producers having at least elementary education, lands bigger 100 hectares and located in the cities of Angicos or Lajes tend to have a higher perception to supply chain management and environmental awareness issues than those with no or incomplete first-level education, producing in lands smaller than 100 hectares and located in the cities of Afonso Bezerra or Pedro Avelino. The chi-square tests also show the amount of milk produced, family s income and associational condition are not related with the variables used in the clusters composition. In this context, this work contributes to planning clusters development strategies and enhancing the production chain sustainability. This Master of Science Thesis can also help to introduce the environmental variable in the project, assessment and monitoring of development policies as well

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The aquatic ecosystems can play a role as carbon-dioxide-source or carbon-dioxide-sink systems due to the high predominance of heterotrophic or autotrophic metabolism. The primary production can strongly affect the carbon balance (CO2) through the consumption of carbon dioxide in the photosynthesis, especially in eutrophic environment, acting as a carbon sink. The present study tested the hypothesis that the eutrophic reservoirs in tropical semi-arid region are carbon dioxide-sink systems due to the high primary productivity presented in these systems. Five Brazilian reservoirs from the semi-arid in the northeast region were monitored monthly during four years (2010 to 2013) with a prolonged drought event identified during the study. The results showed an increasing level of eutrophication over the period of prolonged drought, with the predominance of autotrophy. Significant negative correlations were observed between the partial pressure of CO2 (pCO2) (p<0,001) and chlorophyll-a in the Boqueirão, Passagem das Traíras, Dourado and Gargalheiras reservoirs, showing a pattern of the carbon dioxide-sink systems. However, this pattern was not found in Cruzeta reservoir. In summary, in the tropical semi-arid region, hydrological and morphometric variables can lead to different behaviors of the water-supply reservoirs on the carbon metabolism. The eutrophic reservoirs evaluated showed a negative relationship between pCO2 and Chl-a, which suggests that these water bodies show an autotrophic metabolism and behave as carbon dioxide- sink systems

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

80.00% 80.00%

Publicador:

Resumo:

A variabilidade anual da produção fotossintética (PP) pelo fitoplâncton na zona da barragem da Represa de Jurumirim (São Paulo, Brasil) foi medida após um estudo no período de três anos sucessivos, com o objetivo de identificar padrões recorrentes e suas causas. Medidas da variabilidade da PP em escala diária foram obtidas em dois períodos do ano (estações seca e chuvosa). Nenhum padrão recorrente foi verificado nos dados de PP, visto não haver relação de sua variabilidade com nenhum fator hidrológico (precipitação, nível e vazão de água e washout) nem, aparentemente, com as condições nutritivas da água. A análise de componentes principais revelou que a PP e a taxa de assimilação foram mais elevadas na época do ano em que o conteúdo de PO4(3-) e N-NH4+ foi mais baixo e quando as razões Z EU/Z MIX foram mais elevadas. A produtividade primária/área pode ser estimada pela razão entre a produtividade volumétrica máxima e o coeficiente de extinção vertical da luz. Entretanto, a biomassa integrada na Z EU foi um pobre preditor da produtividade primária/área. Nenhuma correlação foi encontrada entre a temperatura da água com a produtividade primária (por área e volumétrica máxima). em conseqüência, o estudo da PP em três anos sucessivos mostrou que o padrão de variabilidade é tipicamente caótico. em relação às medidas de curta duração, maior PP foi encontrada na estação seca do que na chuvosa. em ambos os períodos, a variabilidade da PP (por área) foi de aproximadamente 35-40%. O padrão foi atribuído não somente à variação na concentração dos nutrientes mas também à magnitude de penetração de luz na água associado ao regime de circulação. Um comentário sobre a relação entre produção primária pelo fitoplâncton com produção pesqueira é também apresentada.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Áreas agrícolas trocam enormes fluxos de CO2, oferecendo uma oportunidade para mitigar o efeito estufa. Neste trabalho, estudou-se o potencial de sequestro de carbono em razão da conversão no manejo das principais atividades agrícolas do Brasil. Dados de vários estudos têm indicado que no sistema soja/milho e nas respectivas rotações, ocorre um sequestro de carbono no solo significativo ao longo dos anos de conversão do plantio convencional para o plantio direto, com uma média de 0,41 Mg C ha-1 ano-1. O mesmo efeito tem sido observado nos canaviais, porém há maiores acúmulos de carbono no solo quando as áreas de cana-de-açúcar são convertidas da colheita baseada na queima para a mecanizada, em que grandes quantidades de palha são deixadas na superfície do solo (1,8 Mg C ha-1 ano-1). Esse maior potencial de acúmulo de carbono no solo nos canaviais, comparado com outras culturas, está diretamente relacionado com a maior produção primária dessa cultura. Apesar disso, muito desse potencial de sequestro é perdido, uma vez que os canaviais são reformados, sob preparo intensivo do solo. As áreas de pasto mostram uma depleção nos estoques de carbono, quando convertidas de áreas naturais; porém, a integração dessas áreas com agricultura pode promover o aumento nos estoques de carbono do solo. Os trabalhos têm mostrado que as principais atividades agrícolas do Brasil possuem um grande potencial de mitigação, especialmente na forma de acúmulo de carbono no solo, sendo uma oportunidade para estratégias futuras.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Em um contexto econômico em que fatores intangíveis, como inovação e aprendizado assumem cada vez mais importância no processo produtivo, a abordagem sobre sistema de inovação revela-se um importante instrumento de política de desenvolvimento regional. A condição pouco desenvolvida do estado do Pará revela uma economia assentada na produção primária, com baixa intensidade tecnológica e pouca competitividade. Com intuito de demonstrar a capacidade inovadora do estado do Pará na ótica do seu sistema regional de inovação, a pesquisa buscou identificar processos de adoção e difusão de inovação, em três diferentes setores, além de analisar a relação universidade-setor produtivo e a política estadual de C&T. Os resultados demonstraram que apesar da existência de um importante arranjo institucional de P&D, a ausência de interação entre os agentes restringe o processo de geração, difusão e adoção de novas tecnologias no estado, denotando assim sua reduzida capacidade inovadora. Essa condição é agravada pela fragilidade da política estadual de C&T, configurando assim um sistema regional de inovação fragmentado e desarticulado.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Estuários são ambientes ricos em nutrientes, favorecendo a reprodução e desenvolvimento de diversas espécies. Nestes, o fitoplâncton representa uma considerável parcela da produção primária e, em conjunto com outros fatores, regula os níveis de produtividade biológica. Este estudo teve o objetivo de conhecer a dinâmica do microfitoplâncton e sua correlação com os fatores ambientais no estuário do rio Guajará-mirim, na cidade de Vigia- PA, que é um importante pólo pesqueiro do estado do Pará. Foram realizadas coletas bimestrais de fitoplâncton e parâmetros físico-químicos em quatro estações de coleta ao longo do estuário, durante os períodos de maré vazante e enchente. Foram determinadas a composição específica e densidade do microfitoplâncton (org.L-1) e realizadas análises de frequência de ocorrência, diversidade e equitabilidade, agrupamento e componentes principais (ACP). Sazonalmente, nota-se, principalmente durante a maré vazante, uma considerável variação dos parâmetros físico-químicos que está fortemente relacionada ao ciclo hidrológico da região. Foram registrados 78 táxons pertencentes às Divisões Bacillariophyta (65), Chlorophyta (6), Cyanophyta (3), Dinophyta (3), e Ochrophyta (1). A divisão Bacillariophyta foi predominante em numero de espécies, frequência de ocorrência e densidade (99,89%). A densidade média mensal do microfitoplâncton variou de 9.999 (julho) a 535.411 org. L-1 (janeiro). Durante o mês de janeiro ocorreu uma floração de Skeletonema costatum (máx = 1.996.613 org. L-1). A comunidade microfitoplanctônica caracterizou-se como de diversidade média (média geral anual = 2,40). A variação sazonal dos parâmetros físico-químicos e da densidade das espécies foi o fator preponderante no agrupamento de amostras, tendo se formado dois grandes grupos, o primeiro composto por amostras do período chuvoso e o segundo grupo composto por amostras do período de estiagem. A análise de componentes principais mostrou que, apesar de os parâmetros físico-químicos apresentarem baixa variabilidade espacial e sazonal, a variação do índice de pluviosidade, do teor de sólidos totais dissolvidos e da salinidade foi determinante na variação da densidade de grande parte das espécies e também favoreceu um leve aumento da diversidade no período de estiagem.