Genetic variability for temperament indicators of Nellore cattle

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação aeróbia de nadadores através de protocolos invasivos e não invasivos em duas situações distintas: nado livre e atado

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Diversidade genética em duas populações de Pterogyne nitens Tul. utilizando SSR

Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV

Model updating of the non-linear vibrating structures through Volterra series and proper orthogonal decomposition

Classical procedures for model updating in non-linear mechanical systems based on vibration data can fail because the common linear metrics are not sensitive for non-linear behavior caused by gaps, backlash, bolts, joints, materials, etc. Several strategies were proposed in the literature in order to allow a correct representative model of non-linear structures. The present paper evaluates the performance of two approaches based on different objective functions. The first one is a time domain methodology based on the proper orthogonal decomposition constructed from the output time histories. The second approach uses objective functions with multiples convolutions described by the first and second order discrete-time Volterra kernels. In order to discuss the results, a benchmark of a clamped-clamped beam with an pre-applied static load is simulated and updated using proper orthogonal decomposition and Volterra Series. The comparisons and discussions of the results show the practical applicability and drawbacks of both approaches.

Uso do acesso lateral para aspiração folicular em ovelhas Santa Inês

Pós-graduação em Medicina Veterinária - FCAV

Computational insight into materials properties

The aim of the work was to explore the practical applicability of molecular dynamics at different length and time scales. From nanoparticles system over colloids and polymers to biological systems like membranes and finally living cells, a broad range of materials was considered from a theoretical standpoint. In this dissertation five chemistry-related problem are addressed by means of theoretical and computational methods. The main results can be outlined as follows. (1) A systematic study of the effect of the concentration, chain length, and charge of surfactants on fullerene aggregation is presented. The long-discussed problem of the location of C60 in micelles was addressed and fullerenes were found in the hydrophobic region of the micelles. (2) The interactions between graphene sheet of increasing size and phospholipid membrane are quantitatively investigated. (3) A model was proposed to study structure, stability, and dynamics of MoS2, a material well-known for its tribological properties. The telescopic movement of nested nanotubes and the sliding of MoS2 layers is simulated. (4) A mathematical model to gain understaning of the coupled diffusion-swelling process in poly(lactic-co-glycolic acid), PLGA, was proposed. (5) A soft matter cell model is developed to explore the interaction of living cell with artificial surfaces. The effect of the surface properties on the adhesion dynamics of cells are discussed.

Development of a system measuring adhesion forces in powder collectives

Fine powders commonly have poor flowability and dispersibility due to interparticle adhesion that leads to formation of agglomerates. Knowing about adhesion in particle collectives is indispensable to gain a deeper fundamental understanding of particle behavior in powders. Especially in pharmaceutical industry a control of adhesion forces in powders is mandatory to improve the performance of inhalation products. Typically the size of inhalable particles is in the range of 1 - 5 µm. In this thesis, a new method was developed to measure adhesion forces of particles as an alternative to the established colloidal probe and centrifuge technique, which are both experimentally demanding, time consuming and of limited practical applicability. The new method is based on detachment of individual particles from a surface due to their inertia. The required acceleration in the order of 500 000 g is provided by a Hopkinson bar shock excitation system and measured via laser vibrometry. Particle detachment events are detected on-line by optical video microscopy. Subsequent automated data evaluation allows obtaining a statistical distribution of particle adhesion forces. To validate the new method, adhesion forces for ensembles of single polystyrene and silica microspheres on a polystyrene coated steel surface were measured under ambient conditions. It was possible to investigate more than 150 individual particles in one experiment and obtain adhesion values of particles in a diameter range of 3 - 13 µm. This enables a statistical evaluation while measuring effort and time are considerably lower compared to the established techniques. Measured adhesion forces of smaller particles agreed well with values from colloidal probe measurements and theoretical predictions. However, for the larger particles a stronger increase of adhesion with diameter was observed. This discrepancy might be induced by surface roughness and heterogeneity that influence small and large particles differently. By measuring adhesion forces of corrugated dextran particles with sizes down to 2 µm it was demonstrated that the Hopkinson bar method can be used to characterize more complex sample systems as well. Thus, the new device will be applicable to study a broad variety of different particle-surface combinations on a routine basis, including strongly cohesive powders like pharmaceutical drugs for inhalation.

Application of headspace solid phase microextraction to qualitative and quantitative analysis of tobacco additives in cigarettes

Cigarettes may contain up to 10% by weight additives which are intended to make them more attractive. A fast and rugged method for a cigarette-screening for additives with medium volatility was developed using automatic headspace solid phase microextraction (HS-SPME) with a 65 microm carbowax-divinylbenzene fiber and gas chromatography-mass spectrometry (GC-MS) with standard electron impact ionisation. In three runs, each cigarette sample was extracted in closed headspace vials using basic, acidic and neutral medium containing 0.5 g NaCl or Na2SO4. Furthermore, the method was optimized for quantitative determination of 17 frequently occurring additives. The practical applicability of the method was demonstrated for cigarettes from 32 brands.

Leistungsverfügbarkeit zwischen Theorie und Praxis

Leistungsverfügbarkeit als Kennwert ist in den letzten Jahren in den theoretischen sowie auch praktischen Fokus gerückt. Zielstellung eines theoretischen Ansatzes in diesem Bereich muss die Schaffung von Grundlagen für den praktischen Nutzen sein. Um die bestehende Lücke zwischen den dargestellten Parteien ein Stück weit zu schließen, erläutert der vorliegende Artikel zunächst Forderungen der Praxis aus Sicht von Anlagenplaner und -betreiber und stellt anschließend einen darauf antwortenden theoretischen Ansatz vor, der die Planbarkeit von Leistungsverfügbarkeit ermöglichen soll.

The Open Door Mission: Measuring and predicting outcomes of one community-based substance abuse treatment program

The objectives of this study were to identify and measure the average outcomes of the Open Door Mission's nine-month community-based substance abuse treatment program, identify predictors of successful outcomes, and make recommendations to the Open Door Mission for improving its treatment program.^ The Mission's program is exclusive to adult men who have limited financial resources: most of which were homeless or dependent on parents or other family members for basic living needs. Many, but not all, of these men are either chemically dependent or have a history of substance abuse.^ This study tracked a cohort of the Mission's graduates throughout this one-year study and identified various indicators of success at short-term intervals, which may be predictive of longer-term outcomes. We tracked various levels of 12-step program involvement, as well as other social and spiritual activities, such as church affiliation and recovery support.^ Twenty-four of the 66 subjects, or 36% met the Mission's requirements for success. Specific to this success criteria; Fifty-four, or 82% reported affiliation with a home church; Twenty-six, or 39% reported full-time employment; Sixty-one, or 92% did not report or were not identified as having any post-treatment arrests or incarceration, and; Forty, or 61% reported continuous abstinence from both drugs and alcohol.^ Five research-based hypotheses were developed and tested. The primary analysis tool was the web-based non-parametric dependency modeling tool, B-Course, which revealed some strong associations with certain variables, and helped the researchers generate and test several data-driven hypotheses. Full-time employment is the greatest predictor of abstinence: 95% of those who reported full time employment also reported continuous post-treatment abstinence, while 50% of those working part-time were abstinent and 29% of those with no employment were abstinent. Working with a 12-step sponsor, attending aftercare, and service with others were identified as predictors of abstinence.^ This study demonstrates that associations with abstinence and the ODM success criteria are not simply based on one social or behavioral factor. Rather, these relationships are interdependent, and show that abstinence is achieved and maintained through a combination of several 12-step recovery activities. This study used a simple assessment methodology, which demonstrated strong associations across variables and outcomes, which have practical applicability to the Open Door Mission for improving its treatment program. By leveraging the predictive capability of the various success determination methodologies discussed and developed throughout this study, we can identify accurate outcomes with both validity and reliability. This assessment instrument can also be used as an intervention that, if operationalized to the Mission’s clients during the primary treatment program, may measurably improve the effectiveness and outcomes of the Open Door Mission.^

Desarrollo de un método estadístico para la generación de escenarios climáticos de alta resolución a partir de simulaciones de baja resolución de Modelos de Circulación General: aplicación a España

Esta tesis doctoral presenta el desarrollo, verificación y aplicación de un método original de regionalización estadística para generar escenarios locales de clima futuro de temperatura y precipitación diarias, que combina dos pasos. El primer paso es un método de análogos: los "n" días cuya configuración atmosférica de baja resolución es más parecida a la del día problema, se seleccionan de un banco de datos de referencia del pasado. En el segundo paso, se realiza un análisis de regresión múltiple sobre los "n" días más análogos para la temperatura, mientras que para la precipitación se utiliza la distribución de probabilidad de esos "n" días análogos para obtener la estima de precipitación. La verificación de este método se ha llevado a cabo para la España peninsular y las Islas Baleares. Los resultados muestran unas buenas prestaciones para temperatura (BIAS cerca de 0.1ºC y media de errores absolutos alrededor de 1.9ºC); y unas prestaciones aceptables para la precipitación (BIAS razonablemente bajo con una media de -18%; error medio absoluto menor que para una simulación de referencia (la persistencia); y una distribución de probabilidad simulada similar a la observada según dos test no-paramétricos de similitud). Para mostrar la aplicabilidad de la metodología desarrollada, se ha aplicado en detalle en un caso de estudio. El método se aplicó a cuatro modelos climáticos bajo diferentes escenarios futuros de emisiones de gases de efecto invernadero, para la región de Aragón, produciendo así proyecciones futuras de precipitación y temperaturas máximas y mínimas diarias. La fiabilidad de la técnica de regionalización fue evaluada de nuevo para el caso de estudio mediante un proceso de verificación. Para determinar la capacidad de los modelos climáticos para simular el clima real, sus simulaciones del pasado (la denominada salida 20C3M) se regionalizaron y luego se compararon con el clima observado (los resultados son bastante robustos para la temperatura y menos concluyentes para la precipitación). Las proyecciones futuras a escala local presentan un aumento significativo durante todo el siglo XXI de las temperaturas máximas y mínimas para todos los futuros escenarios de emisiones considerados. Las simulaciones de precipitación presentan mayores incertidumbres. Además, la aplicabilidad práctica del método se demostró también mediante su utilización para producir escenarios climáticos futuros para otros casos de estudio en los distintos sectores y regiones del mundo. Se ha prestado especial atención a una aplicación en Centroamérica, una región que ya está sufriendo importantes impactos del cambio climático y que tiene un clima muy diferente. ABSTRACT This doctoral thesis presents the development, verification and application of an original downscaling method for daily temperature and precipitation, which combines two statistical approaches. The first step is an analogue approach: the “n” days most similar to the day to be downscaled are selected. In the second step, a multiple regression analysis using the “n” most analogous days is performed for temperature, whereas for precipitation the probability distribution of the “n” analogous days is used to obtain the amount of precipitation. Verification of this method has been carried out for the Spanish Iberian Peninsula and the Balearic Islands. Results show good performance for temperature (BIAS close to 0.1ºC and Mean Absolute Errors around 1.9ºC); and an acceptable skill for precipitation (reasonably low BIAS with a mean of - 18%, Mean Absolute Error lower than for a reference simulation, i.e. persistence, and a well-simulated probability distribution according to two non-parametric tests of similarity). To show the applicability of the method, a study case has been analyzed. The method was applied to four climate models under different future emission scenarios for the region of Aragón, thus producing future projections of daily precipitation and maximum and minimum temperatures. The reliability of the downscaling technique was re-assessed for the study case by a verification process. To determine the ability of the climate models to simulate the real climate, their simulations of the past (the 20C3M output) were downscaled and then compared with the observed climate – the results are quite robust for temperature and less conclusive for the precipitation. The downscaled future projections exhibit a significant increase during the entire 21st century of the maximum and minimum temperatures for all the considered future emission scenarios. Precipitation simulations exhibit greater uncertainties. Furthermore, the practical applicability of the method was demonstrated also by using it to produce future climate scenarios for some other study cases in different sectors and regions of the world. Special attention was paid to an application of the method in Central America, a region that is already suffering from significant climate change impacts and that has a very different climate from others where the method was previously applied.

Interpolação projetual : explorando o espaço de possibilidades entre a menor complexidade e o maior desempenho

Tese de doutoramento, Belas-Artes (Design de Equipamento), Universidade de Lisboa, Faculdade de Belas-Artes, 2016

Subsidiarity between Law and Economics. Research Papers in Law, 1/2005

From the Introduction. The present contribution is an attempt to raise awareness between the 'trenches' by juxtaposing the two approaches to subsidiarity. Subsequently, I shall set out why, in economics, subsidiarity is embraced as a key principle in the design and working of the Union and how a functional subsidiarity test can be derived from this thinking. Throughout the paper, a range of illustrations and examples is provided in an attempt to show the practical applicability of a subsidiarity test. This does not mean, of course, that the application of the test can automatically "solve" all debates on whether subsidiarity is (not) violated. What it does mean, however, is that a careful methodology can be a significant help to e.g. national parliaments and the Brussels circuit, in particular, to discourage careless politicisation as much as possible and to render assessments of subsidiarity comparable throughout the Union. The latter virtue should be of interest to national parliaments in cooperating, within just six weeks, about a common stance in the case of a suspected violation of the principle. The structure of the paper is as follows. Section 2 gives a flavour of very different approaches and appreciation of the subsidiarity principle in European law and in the economics of multi-tier government. Section 3 elaborates on the economics of multi-tier government as a special instance of cost / benefit analysis of (de)centralisation in the three public economic functions of any government system. This culminates in a five-steps subsidiarity test and a brief discussion about its proper and improper application. Section 4 applies the test in a non-technical fashion to a range of issues of the "efficiency function" (i.e. allocation and markets) of the EU. After showing that the functional logic of subsidiarity may require liberalisation to be accompanied by various degrees of centralisation, a number of fairly detailed illustrations of how to deal with subsidiarity in the EU is provided. One illustration is about how the subsidiarity logic is misused by protagonists (labour in the internal market). A slightly different but frequently encountered aspect consists in the refusal to recognize that the EU (that is, some form of centralisation) offers a better solution than 25 national ones. A third range of issues, where the functional logic of subsidiarity could be useful, emerges when the boundaries of national competences are shifting due to more intense cross-border flows and developments. Other subsections are devoted to Union public goods and to the question whether the subsidiarity test might trace instances of EU decentralisation: a partial or complete shift of a policy or regulation to Member States. The paper refrains from an analysis of the application of the subsidiarity test to the other two public functions, namely, equity and macro-economic stabilisation.2 Section 5 argues that the use of a well-developed methodology of a functional subsidiarity test would be most useful for the national parliaments and even more so for their cooperation in case of a suspected violation of subsidiarity. Section 6 concludes.

Obstacles to a totally functional programming style

"Totally functional programming" (TFP) advocates the complete replacement of symbolic representations for data by functions. TFP is motivated by observations from practice in language extensibility and functional programming. Its technical essence extends the role of "fold" functions in structuring functional programs to include methods that make comparisons on elements of data structures. The obstacles that currently prevent the immediate uptake of TFP as a style within functional programming equally indicate future research directions in the areas of theoretical foundations, supporting technical infrastructure, demonstrated practical applicability, and relationship to OOP.

Governança metropolitana e sustentabilidade: uma análise da gestão dos resíduos sólidos em Natal e Parnamirim

Nowadays the rapid growth of urban centers, the accumulation of social and environmental demands, the relationship between public policy and increasingly complex problems accentuates the feeling that cities undergo an urban crisis. This crisis is especially characterized by its multidimensionality, which goes through economic, cultural, ethical, environmental and, above all, political issues. In order to study the core of this crisis that is manifested by the urbanization process and has in its exacerbation on the metropolitan areas was conducted conceptual and theoretical study of the meaning of sustainable development applied to the everyday reality of cities, extracting from this debate concepts, such as: sustainable territorial development, administrative sustainability and political sustainability. Looking forward to test this the practical applicability of these theoretical concepts studied, an empirical study was done on the reality of metropolitan solid waste in Natal, Rio Grande do Norte, Brasil. According to the recent theoretical debate, the waste comprises a sector of the urban environmental crisis that best represents the relationship between man and environment. Ensuring the multidimensionality of environmental issues through the “Saber Ambietal” (LEFF, 2005), was made a extensive qualitative study correlating the concepts of sustainable territorial development, metropolitan governance and “Saber Ambiental” applied on solid waste. The results point to the real challenges of municipal government in understanding the real situation, take action and change the inertia in which have operated in recent decades. The results also showed the importance of transforming environmental issues in political, in other words, struggle for ideas, ideological and ethical references.