A comparative study of population traits between two South American populations of the striped-legged hermit crab Clibanarius vittatus

The striped-legged hermit Crab Clibanarius vittatus, with a geographical distribution covering a wide range Of latitudes in the western Atlantic, was selected for a comparative study on population features between two different areas of the Brazilian coast that are separated by approximately 3000 km. The two populations Were sampled concurrently for nine months. The populations in northern and southeastern Brazil showed different profiles in terms of size of specimens, sex ratio, and shell occupation. The observed plasticity of these life-cycle traits of C. vittatus in relation to local environmental conditions is discussed. (C) 2009 Elsevier Masson SAS. All rights reserved

Canine Distemper Virus in a Crab-eating Fox (Cerdocyon thous) in Brazil: Case Report and Phylogenetic Analyses

Although canine distemper is enzootic worldwide and has a wide host range, there are no reports of canine distemper virus there are no reports of canine distemper virus provide information on virus phylogeny and histopathologic lesions. The objective of this study is report and describe canine distemper in a crab-eating fox (C. thous), with a focus oil the phylogeny of the virus strain and the histopathologic lesions in the animal.

Crab-eating fox (Cerdocyon thous), a South American canid, as a definitive host for Hammondia heydorni

Hammondia heydorni is a cyst forming coccidia closely related to other apicomplexans, such as Toxoplasma gondii, Neospora caninum and Hammondia hammondi with a two-host life cycle. Dogs and other canids as red foxes (Vulpes vulpes) and coyotes (Canis latrans) may serve as definitive hosts for H. heydorni. Sporulated oocysts are infective for cattle, sheep and goats, which may serve as intermediate hosts. Herein, we describe the ability of crab-eating fox (Cerdocyon thous), a wild carnivore that is commonly found from northern Argentina to northern South America, to serve as definitive host of H. heydorni. The whole masseter muscle and brain from two 2-year-old bovines were collected, minced and pooled together for the fox infection. The bovine pooled tissues were equally administered to four foxes, in two consecutive days. Two foxes shed subspherical unsporulated oocysts measuring 10-15 mu m, after 8 and 9 days post-infection, respectively. One of the foxes eliminated oocysts for 5 days, while the other fox shed oocysts for 9 days. A DNA sample of oocysts detected at each day of oocyst elimination was tested by two PCRs, one of them carried out employing primers directed to the common toxoplasmatiid 18S and 5.8S ribosomal RNA coding genes (PCR-ITS1) and the other based on heat-shock protein 70 kDa coding gene (PCR-HSP70). These samples were also submitted to a N. caninum specific nested-PCR protocol based on a N. caninum specific gene (Nc5-nPCR). All of them were positive by PCR-ITS1 and PCR-HSP70 but negative by Nc5-nPCR. The PCR-ITS1 and PCR-HSP70 nucleotide sequences amplified from the oocysts shed by the foxes revealed 100% identity with homologous sequences of H. heydorni. In conclusion, it is clear that H. heydorni also uses the crab-eating fox as a definitive host. The crab-eating fox is usually reported to live in close contact with livestock in several regions of Brazil. Therefore, it is reasonable to infer that such carnivores may play an important role in the sylvatic and domestic cycles of H. heydorni infection. (C) 2009 Elsevier B.V. All rights reserved.

Effect of ion exchange on R-curve behavior of a dental porcelain

The objective of this study was to evaluate the effect of the ion exchange treatment on the R-curve behavior of a leucite-reinforced dental porcelain, testing the hypothesis that the ion exchange is able to improve the R-curve behavior of the porcelain studied. Porcelain disks were sintered, finely polished, and submitted to an ion exchange treatment with a KNO(3) paste. The R-curve behavior was assessed by fracturing the specimens in a biaxial flexure design after making Vickers indentations in the center of the polished surface with loads of 1.8, 3.1, 4.9, 9.8, 31.4, and 49.0 N. The results showed that the ion exchange process resulted in significant improvements in terms of fracture toughness and flexural strength as compared to the untreated material. Nevertheless, the rising R-curve behavior previously observed in the control group disappeared after the ion exchange treatment, i.e., fracture toughness did not increase with the increase in crack size for the treated group.

Effect of ion-exchange temperature on mechanical properties of a dental porcelain

The objective of this study was to determine the influence of different ion-exchange temperatures on the biaxial flexural strength (sigma(f)), hardness (HV) and indentation fracture resistance (K(IF)) of a dental porcelain. Disk-shaped specimens were divided into five groups (n = 10) and submitted to an ion-exchange procedure using KNO(3) paste for 15 min in the following temperatures (degrees C); (I) 430; (II) 450; (III) 470; (IV) 490; (V) 510; and control (no ion exchange). The value of sigma(f) was determined in artificial saliva at 37 degrees C. The values of HV and K(IF) were obtained using 3 Vickers indentations in each specimen (19.6 N). Results showed that ion exchange increases significantly the properties of the material as compared to the control and no significant differences were found among the temperatures tested for any of the properties studied. (C) 2010 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

Al(2)O(3)/GdAlO(3)fiber for dental porcelain reinforcement

The aim of this study was to test the hypothesis that the addition of continuous or milled GdAlO(3)/Al(2)O(3) fibers to a dental porcelain increases its mechanical properties. Porcelain bars without reinforcement (control) were compared to those reinforced with long fibers (30 vol%). Also, disk specimens reinforced with milled fibers were produced by adding 0 (control), 5 or 10 vol% of particles. The reinforcement with continuous fibers resulted in significant increase in the uniaxial flexural strength from 91.5 to 217.4 MPa. The addition of varied amounts of milled fibers to the porcelain did not significantly affect its biaxial flexural strength compared to the control group. SEM analysis showed that the interface between the continuous fiber and the porcelain was free of defects. On the other hand, it was possible to note the presence of cracks surrounding the milled fiber/porcelain interface. In conclusion, the reinforcement of the porcelain with continuous fibers resulted in an efficient mechanism to increase its mechanical properties; however the addition of milled fibers had no significant effect on the material because the porcelain was not able to wet the ceramic particles during the firing cycle. (C) 2008 Elsevier Ltd. All rights reserved.

Effect of ion exchange on strength and slow crack growth of a dental porcelain

Objectives. To determine the effect of ion exchange on slow crack growth (SCG) parameters (n, stress corrosion susceptibility coefficient, and sigma(f0), scaling parameter) and Weibull parameters (m, Weibull modulus, and sigma(0), characteristic strength) of a dental porcelain. Methods. 160 porcelain discs were fabricated according to manufacturer`s instructions, polished through 1 mu m and divided into two groups: GC (control) and GI (submitted to an ion exchange procedure using a KNO(3) paste at 470 degrees C for 15 min). SCG parameters were determined by biaxial flexural strength test in artificial saliva at 37 degrees C using five constant stress rates (n =10). 20 specimens of each group were tested at 1 MPa/s to determine Weibull parameters. The SPT diagram was constructed using the least-squares fit of the strength data versus probability of failure. Results. Mean values of m and sigma(0) (95% confidence interval), n and sigma(f0) (standard deviation) were, respectively: 13.8 (10.1-18.8) and 60.4 (58.5 - 62.2), 24.1 (2.5) and 58.1 (0.01) for GC and 7.4 (5.3 -10.0) and 136.8 (129.1-144.7), 36.7 (7.3) and 127.9 (0.01) for GI. Fracture stresses (MPa) calculated using the SPT diagram for lifetimes of 1 day, 1 year and 10 years (at a 5% failure probability) were, respectively, 31.8, 24.9 and 22.7 for GC and 71.2, 60.6 and 56.9 for GI. Significance. For the porcelain tested, the ion exchange process improved strength and resistance to SCG, however, the material`s reliability decreased. The predicted fracture stress at 5% failure probability for a lifetime of 10 years was also higher for the ion treated group. (C) 009 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Fatigue and damage accumulation of veneer porcelain pressed on Y-TZP

Objectives: This study compared the reliability and fracture patterns of zirconia cores veneered with pressable porcelain submitted to either axial or off-axis sliding contact fatigue. Methods: Forty-two Y-TZP plates (12 mm x 12 mm x 0.5 mm) veneered with pressable porcelain (12 mm x 12 mm x 1.2 mm) and adhesively luted to water aged composite resin blocks (12 mm x 12 mm x 4 mm) were stored in water at least 7 days prior to testing. Profiles for step-stress fatigue (ratio 3:2:1) were determined from single load to fracture tests (n = 3). Fatigue loading was delivered on specimen either on axial (n = 18) or off-axis 30 degrees angulation (n = 18) to simulate posterior tooth cusp inclination creating a 0.7 mm slide. Single load and fatigue tests utilized a 6.25 mm diameter WC indenter. Specimens were inspected by means of polarized-light microscope and SEM. Use level probability Weibull curves were plotted with 2-sided 90% confidence bounds (CB) and reliability for missions of 50,000 cycles at 200 N (90% CB) were calculated. Results: The calculated Weibull Beta was 3.34 and 2.47 for axial and off-axis groups, respectively, indicating that fatigue accelerated failure in both loading modes. The reliability data for a mission of 50,000 cycles at 200 N load with 90% CB indicates no difference between loading groups. Deep penetrating cone cracks reaching the core-veneer interface were observed in both groups. Partial cones due to the sliding component were observed along with the cone cracking for the off-axis group. No Y-TZP core fractures were observed. Conclusions: Reliability was not significantly different between axial and off-axis mouth-motion fatigued pressed over Y-TZP cores, but incorporation of sliding resulted in more aggressive damage on the veneer. (C) 2009 Elsevier Ltd. All rights reserved.

Carapace dentition patterns, morphometrics and allozyme differentiation amongst two toothed freshwater crab species (Potamonautes warreni and P-unispinus) (Decapoda : Brachyura : Potamonautidae) from river systems in South Africa

The taxonomic relationship between two toothed South African river crabs, Potamonautes warreni and P. unispinus, is unclear. The problem stems from the widespread variation in carapace dentition patterns amongst P. warreni individuals over its biogeographic range, where single toothed individuals may appear similar in carapace morphology to P. unispinus. Ten populations of P. warreni and 18 populations of P. unispinus were collected and the morphometric and genetic differentiation between the two taxa quantified. Patterns of morphometric and genetic variation were examined using multivariate statistics and protein gel electrophoresis, respectively. Principal component analyses of carapace characters showed that the two species are morphologically indistinguishable. However, discriminate functions analyses and additional statistical results corroborate the morphological distinction between the two taxa. Allozyme electrophoresis of 17 protein coding loci, indicated a close genetic similarity between the two species (I = 0.92). A fixed allelic difference at one locus (LT-2) and extensive genetic variability at another locus (PGM-1) indicate that two gene pools are present and that the two taxa are genetically isolated. Intraspecific genetic I values for both species were > 0.97 and indicated no apparent genetic structuring on a micro or macro-geographic scale. The variation in carapace dentition among P. warreni populations possesses no genetic basis and may possibly toe the product of ecogenesis. The value of dentition patterns in the systematics of river crabs is discussed. Dentition patterns among river crab species appear to be conserved and reliable as species specific diagnostic markers, but should ideally be used in combination with other morphological data sets and genetic evidence.

Morphometry of testis and seminiferous tubules of the adult crab-eating fox (Cerdocyon thous, Linnaeus, 1766)

Body and testicular biometric parameters are very important for establishing reproductive patterns and, consequently, the development of protocols for assisted reproduction in different species. A direct correlation between the testis weight and the sperm population was observed in other studied species, because the testis size primarily reflects the total volume of the seminiferous tubule, its main component. The objective of this study was to determine the testicular volume parameters and correlate data from morphometry of testis and seminiferous tubules with body mass in six adult crab-eating foxes. The mean body weight of the crab-eating foxes in this study was 6.53 kg, with approximately 0.068% allocated to the testicular mass and 0.042% specifically to seminiferous tubules, which represented 87.5% of the testicular parenchyma. The albuginea comprised 12.5% of the testicular mass. The mean diameter of seminiferous tubules was 236 µm, and the mean thickness of the seminiferous epithelium was 62.9 µm. Values of tubular parameters indicate a sperm productivity close to those observed in previously studied carnivores.

Biomechanical modeling and simulation of the spider crab (maja brachydactyla)

Uma linha de pesquisa e desenvolvimento na área da robótica, que tem recebido atenção crescente nos últimos anos, é o desenvolvimento de robôs biologicamente inspirados. A ideia é adquirir conhecimento de seres biológicos, cuja evolução ocorreu ao longo de milhões de anos, e aproveitar o conhecimento assim adquirido para implementar a locomoção pelos mesmos métodos (ou pelo menos usar a inspiração biológica) nas máquinas que se constroem. Acredita-se que desta forma é possível desenvolver máquinas com capacidades semelhantes às dos seres biológicos em termos de capacidade e eficiência energética de locomoção. Uma forma de compreender melhor o funcionamento destes sistemas, sem a necessidade de desenvolver protótipos dispendiosos e com longos tempos de desenvolvimento é usar modelos de simulação. Com base nestas ideias, o objectivo deste trabalho passa por efectuar um estudo da biomecânica da santola (Maja brachydactyla), uma espécie de caranguejo comestível pertencente à família Majidae de artrópodes decápodes, usando a biblioteca de ferramentas SimMechanics da aplicação Matlab / Simulink. Esta tese descreve a anatomia e locomoção da santola, a sua modelação biomecânica e a simulação do seu movimento no ambiente Matlab / SimMechanics e SolidWorks.

Mangrove sedimentary characteristics and implications for crab Ucides cordatus (Crustacea, Decapoda, Ucididae) distribution in an estuarine area of the Amazonian region

At the coastal zone sediments, water and organisms interact intensely. At equatorial tidal-dominated coast mangroves are abundant. These areas are well-known for their ecological importance. Considering the mangroves of Atlantic South America, the mangrove crab, Ucides cordatus has ecological and economic prominence. High densities of this crab are found on the Amazon coast. This study investigates the sediment distribution of the Bragança mangrove area (Amazon coast, Brazil) and its correlations with vegetation and mangrove crab distribution. Sediments of 47 sites, as well as crabs from sites with different sediment and vegetation, were sampled. Results show that surface sediment of the area is mainly composed by silt (59%), with 21% sand and 20% clay. Variations in sorting and skewness are the product of local variations in clay and sand content. The vegetation type was significantly correlated to mangrove crab characteristics, abundance and weight/size. Sediment characteristics are also substantially different according to the vegetation type. Areas where Avicennia germinans prevails have more sand and clay than areas of Rizophora mangle, in which silt is dominant and crabs were significantly heavier. The present results have showed that the distribution of sediments, crabs and vegetation at mangrove areas are strongly correlated. Thus, they should be studied in conjunction.

Bioecology of the crab Ucides cordatus (Crustacea, Decapoda) in mangroves influenced by the Amazon River, Brazil

The mangrove crab (Ucides cordatus) is a valuable fishery resource, overfished along the Brazilian coast. This study aimed to obtain bioecological data on this crab along the coast of the State of Amapá. Six bimonthly samplings were conducted between December 2008 and January 2010. Transects were used to estimate the density (burrows m-2) and population abundance (individuals m-2). All the animals were subjected to biometrics, with females being classified according to their stage of gonadal maturation. The mean density (1.09 burrows m-2) and abundance (0.31 individuals m-2) were influenced by the climate with the highest values in summer (1.17 burrows m-2 and 0.34 individuals m-2). The male to female ratio was 1.38:1 showing significant difference in the proportion of sexes. The individuals showed sexual dimorphism, with linear measurements significantly higher in males. The sampled animals also had larger carapace length and width (CL and CW) compared to crabs studied in other Brazilian states. There was a positive relationship between CW and CL and individual weight (IW) and CW for males (R² = 0.83 and 0.90) and females (R² = 0.79 and 0.84). The growth was negative allometric (CL increases to a lesser extent than CW) for both sexes. The highest frequency of ovigerous females (78%) and in maturation stage IV (38%) occurred in the CW size class between 59.8 and 67.5 mm. The peak of mature females occurred in May and August, showing a reproductive period different from those in other Brazilian states.

Population genetic structure of brown crab (Cancer pagurus) in Irish waters

The brown crab (Cancer pagurus) fishery in Ireland is one of the most important financially and socio-economically, with the species worth approximately €15m per year in the first half of the decade. Only mackerel (Scomber scombrus) and Dublin Bay prawn (Nephrops norvegicus) are of greater value. Despite this, very little research has been conducted to describe the stock structure of brown crab on a national scale. In this study a country-wide assessment of genetic population structure was carried out. Sampling was conducted from commercial fishing boats from 11/06 to 04/08 at seven sample sites representing the central Irish brown crab fisheries, with one sample site from the UK also included in the study. Six microsatellite markers, specifically developed for brown crab, were used to assess genetic diversity and estimate population differentiation parameters. Significant genetic structuring was found using F-statistics (Fst = 0.007) and exact tests, but not with Bayesian methods. Samples from the UK and Wexford were found to be genetically distinct from all other populations. Three northern populations from Malm Head and Stanton Bank were genetically similar with Fst estimates suggesting connectivity between them. Also, Stanton Bank, again on the basis of Fst estimates, appeared to be connected to populations down the west coast of Ireland, as far south as Kerry. Two Galway samples, one inside and one outside of Galway Bay, were genetically differentiated despite their close geographic proximity. It is hypothesised that a persistent northerly summer current could transport pelagic larvae from populations along the southwest and west coasts of Ireland towards Stanton Bank in the North, resulting in the apparent connectivity observed in this study.