Botryoidal platinum, palladium and potarite from the Bom Sucesso stream, Minas Gerais, Brazil: Compositional zoning and origin

Platinum-Pd nuggets from the Born Sucesso stream alluvium Minas Gerais, Brazil. have been investigated by electron-probe microanalysis. The nuggets attain 1 mm in maximum dimension and have a botryoidal habit, with pronounced compositional core-to-margin zoning of internal structures, Although there is a wide variation in internal morphology and individual zones vary markedly in thickness (<1-100 mum), a typical composite arborescent nugget comprises a broad irregular core region of massive auriferous Pd-Hg alloy (potarite delta-PdHg) or cavity space + relict potarite enclosed by a narrow zone of platiniferous, palladium or alloy of near Pt50Pd50 composition, and is progressively oscillatory zoned by palladian platinum, with growth eventually enveloping the whole botryoidal colony, to a narrow rim of palladian platinum or pure platinum. Other nuggets comprise an arborescent to dendritic core of auriferous potarite, a broad internal zone of either pure platinum or palladian platinum, and a narrow rim of platinum, the mineral palladium contains up to about 65 at.% Pd; this is the first detailed modern confirmation of palladium in its type locality. Auriferous potarite ranges in composition from similar toPd(3)Hg(2) to near Pd(Hg,Au). The origin of these nuggets remains unclear, but their mineralogy is broadly equivalent to that of palladian gold. potarite and platinum in alluvial sediments and overburden from Devon, England, which are considered to be detrital, and their platinum-group-clement geochemistry is consistent with precipitation from hydrothermal fluids. We suggest that the Bom Sucesso nuggets resulted from high-level episodic hydrothermal alteration of mafic and ultramafic rocks within the drainage basin, with the remobilized Pt and Pd precipitated in open spaces in the enclosing metaquartzites.

Environmental fragility evaluation and guidelines for environmental zoning: a study case on Ibiuna (the Southeastern Brazilian region)

Environmental fragility models are important decision tools for policy makers as they help quantify environmental sensitivity and understand the relationship between human activities and environmental quality. The objective of this study was to evaluate three different environmental fragility models within the Brazilian rainforest region and to use the results to develop environmental zone classes. Two rural river basins located in Ibiuna, Sao Paulo state, Brazil, were studied. Input variables, including slope class, relief dissection rate, soil class, lithology, land cover, and climate data, were used to compute environmental fragility classes using three standard models. The model outputs were evaluated on their ability to accurately predict the most sensitive and least sensitive areas. The best models for each region were used to derive environmental zoning maps, including restoration priorities, best regions for agriculture, and areas with high needs for soil management. These maps will help support land use strategies for environmental restoration. This study provides insight into territorial ordering and management of environmental services with a regional perspective.

Agroclimatic zoning of the state of Minas Gerais for the production of high quality soybean seeds

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Risk-based Modeling to Develop Zoning Criteria for Land-use Near Canadian Airports

Land development in the vicinity of airports often leads to land-use that can attract birds that are hazardous to aviation operations. For this reason, certain forms of land-use have traditionally been discouraged within prescribed distances of Canadian airports. However, this often leads to an unrealistic prohibition of land-use in the vicinity of airports located in urban settings. Furthermore, it is often unclear that the desired safety goals have been achieved. This paper describes a model that was created to assist in the development of zoning regulations for a future airport site in Canada. The framework links land-use to bird-related safety-risks and aircraft operations by categorizing the predictable relationships between: (i) different land uses found in urbanized and urbanizing settings near airports; (ii) bird species; and (iii) the different safety-risks to aircraft during various phases of flight. The latter is assessed relative to the runway approach and departure paths. Bird species are ranked to reflect the potential severity of an impact with an aircraft (using bird weight, flocking characteristics, and flight behaviours). These criteria are then employed to chart bird-related safety-risks relative to runway reference points. Each form of land-use is categorized to reflect the degree to which it attracts hazardous bird species. From this information, hazard and risk matrices have been developed and applied to the future airport setting, thereby providing risk-based guidance on appropriate land-uses that range from prohibited to acceptable. The framework has subsequently been applied to an existing Canadian airport, and is currently being adapted for national application. The framework provides a risk-based and science-based approach that offers municipalities and property owner’s flexibility in managing the risks to aviation related to their land use.

Genesis of metasomatic sapphirine-corundum-spinel-bearing granulites in Sri Lanka

The goal of the present study is to understand the mechanism of mass transfer, the composition and the role of fluids during crustal metasomatism in high-temperature metamorphic terranes. A well constrained case study, a locality at Rupaha, Sri Lanka was selected. It is located in the Highland Complex of Sri Lanka, which represents a small, but important fragment of the super-continent Gondwana. Excellent exposures of ultramafic rocks, which are embedded in granulites, were found at 10 localities. These provide a unique background for understanding the metasomatic processes. The boundary between the ultramafic and the granulite rocks are lined with metasomatic reaction zones up to 50cm in width. Progressing from the ultramafics to the granulite host rock, three distinct zones with the following mineral assemblages can be distinguished: (1). phlogopite + spinel + sapphirine, (2). spinel + sapphirine and (3). corundum + biotite + plagioclase. In order to assess the P-T-t path, the peak metamorphism and the exhumation history were constrained using different thermobarometers, as well as a diffusion model of garnet zoning. A maximum temperature of 875 ± 20oC (Opx-Cpx thermometer) and at the peak pressure of 9.0 ± 0.1 kbar (Grt-Cpx-Pl-Qtz) was calculated for the silicic granulite. The ultramafic rocks recorded a peak temperature of 840 ± 70oC (Opx-Cpx thermometer) at 9 kbar. Coexisting spinel and sapphirine from the reaction zone yield a temperature of 820 ± 40oC. This is in agreement with the peak-temperatures recorded in the adjacent granulites and ultramafics rocks. The structural concordance of the ultramafic rocks with the siliceous granulite host rock further support the suggestion, that all units have experienced the same peak metamorphism. Diffusion modeling of retrograde zoning in garnets from mafic granulites suggests a three-step cooling history. A maximum cooling rate of 1oC/Ma is estimated during the initial stage of cooling, followed by a cooling rate of ~30oC/Ma. The outermost rims of garnet indicate a slightly slower cooling rate at about 10-15oC/Ma. The sequences of mineral zones, containing a variety of Al-rich, silica undersaturated minerals in the reaction zones separating the ultramafic rocks from the silica-rich rocks can be explained by a diffusion model. This involves the diffusion of Mg from ultramafic rocks across the layers, and K and Si diffuse in opposite direction. Chemical potential of Mg and Si generated continuous monotonic gradient, allowing steady state diffusional transport across the profile. The strong enrichment in Al, and the considerable loss of Si, during the formation of reaction bands can be inferred from isocon diagrams. Some Al was probably added to the reaction zones, while Si was lost. This is most likely due to fluids percolating parallel to the zones at the boundary of the rock units. This study has shown that not only pressure and temperature conditions but most importantly PH2O and the concentration of the chlorine and fluorine in aqueous fluids also control the mass transport in different geological environments.

Zoning and the built environment: A public health analysis of zoning in Austin, Texas

The built environment is part of the physical environment made by people and for people. Because the built environment is such a ubiquitous component of the environment, it acts as an important pathway in determining health outcomes. Zoning, a type of urban planning policy, is one of the most important mechanisms connecting the built environment to public health. This policy analysis research paper explores how zoning regulations in Austin, Texas promote or prohibit the development of a healthy built environment. A systematic literature review was obtained from Active Living Research, which contained literature published about the relationships between the built environment, physical activity, and health. The results of these studies identified the following four components of the built environment that were associated to health: access to recreational facilities, sprawl and residential density, land use mix, and sidewalks and their walkability. A hierarchy analysis was then performed to demonstrate the association between these aspects of the built environment and health outcomes such as obesity, cardiovascular disease, and general health. Once these associations had been established, the components of the built environment were adapted into the evaluation criteria used to conduct a public health analysis of Austin's zoning ordinance. A total of eighty-eight regulations were identified to be related to these components and their varying associations to human health. Eight regulations were projected to have a negative association to health, three would have both a positive and negative association simultaneously, and nine were indeterminable with the information obtained through the literature review. The remaining sixty-eight regulations were projected to be associated in a beneficial manner to human health. Therefore, it was concluded that Austin's zoning ordinance would have an overwhelmingly positive impact on the public's health based on identified associations between the built environment and health outcomes.^

Element concentrations of plagioclase and clinopyroxene in poikilitic olivine gabbros from ODP Hole 153-923A (Table 4)

Ocean Drilling Program Hole 923A, located on the western flank of the Mid-Atlantic Ridge south of the Kane Fracture Zone, recovered primitive gabbros that have mineral trace element compositions inconsistent with growth from a single parental melt. Plagioclase crystals commonly show embayed anorthitic cores overgrown by more albitic rims. Ion probe analyses of plagioclase cores and rims show consistent differences in trace element ratios, indicating variation in the trace element characteristics of their respective parental melts. This requires the existence of at least two distinct melt compositions within the crust during the generation of these gabbros. Melt compositions calculated to be parental to plagioclase cores are depleted in light rare earth elements, but enriched in yttrium, compared to basalts from this region of the Mid-Atlantic Ridge, which are normal mid-ocean ridge basalt (N-MORB). Clinopyroxene trace element compositions are similar to those predicted to be in equilibrium with N-MORB. However, primitive clinopyroxene crystals are much more magnesian than those produced in one-atmosphere experiments on N-MORB, suggesting that the major element composition of the melt was unlike N-MORB. These data require that the diverse array of melt compositions generated within the mantle beneath mid-ocean ridges are not always fully homogenised during melt extraction from the mantle and that the final stage of mixing can occur efficiently within crustal magma chambers. This has implications for the process of melt extraction from the mantle and the liquid line of descent of MORB