Predicting physiological capacity of human load carriage - a review

This review article aims to evaluate a proposed maximum acceptable work duration model for load carriage tasks. It is contended that this concept has particular relevance to physically demanding occupations such as military and firefighting. Personnel in these occupations are often required to perform very physically demanding tasks, over varying time periods, often involving load carriage. Previous research has investigated concepts related to physiological workload limits in occupational settings (e.g. industrial). Evidence suggests however, that existing (unloaded) workload guidelines are not appropriate for load carriage tasks. The utility of this model warrants further work to enable prediction of load carriage durations across a range of functional workloads for physically demanding occupations. If the maximum duration for which personnel can physiologically sustain a load carriage task could be accurately predicted, commanders and supervisors could better plan for and manage tasks to ensure operational imperatives were met whilst minimising health risks for their workers.

Oxygen uptake and heart rate during simulated wildfire suppression tasks performed by Australian rural firefighters

Objective: Australian rural fire crews safeguard the nation against the annual devastation of wildfire. We have previously reported that experienced firefighters identified seven physically demanding tasks for Australian rural fire crews suppressing wildfires. These firefighters rated the operational importance, typical duration, core fitness components, and likely frequency of the seven tasks. The intensity of these duties remains unknown. The aim of this study was to quantify the oxygen uptake (VO2), heart rate (HR) and movement speed responses during simulations of these physically demanding wildfire suppression tasks. Method: Twenty six rural firefighters (20 men, six women) performed up to seven tasks, during which time their HR and movement speed were recorded. The VO2 for each task was also calculated from the analysis of expired air collected in Douglas bags. Firefighters’ HR and movement speed were measured using HR monitors and portable global positioning system units, respectively. Results: The hose work tasks elicited a VO2 of 21-27 mL·kg-1·min-1 and peak HR of 77-87% age-predicted maximal HR (HRmax). Hand tool tasks were accompanied by VO2 of 28-34 mL·kg-1·min-1 and peak HR of 85-95%HRmax. Firefighters’ movement speed spanned 0.2 ± 0.1 to 1.8 ± 0.2 m·s-1 across the seven tasks. The cardiovascular responses in the hand tool tasks were, in most cases, higher (P<0.05) than during those elicited by the hose work tasks. Conclusions: The cardiovascular responses elicited during simulations of physically demanding wildfire suppression approximated those reported for similar tasks in urban and forestry fire fighting jurisdictions. The findings may prompt Australian rural fire agencies to consider cardiovascular disease risk screening and physical selection testing to ensure that healthy and fit firefighters are deployed to the fire ground.

Testes físico-mecânicos e físico-químicos do couro da tilápia vermelha

Realizaram-se testes físico-mecânicos e físico-químicos em couro de tilápia vermelha (Oreochromis spp.) a fim de testar a sua resistência. As amostras foram distribuídas em delineamento inteiramente ao acaso com dois tratamentos: no T1, procedeu-se à retirada do corpo-de-prova no sentido longitudinal e, no T2, à retirada do corpo-de-prova no sentido transversal. Para os testes de determinação da resistência à tração, alongamento e rasgamento progressivo, foi utilizado o dinamômetro EMIC, com velocidade de afastamento entre as cargas de 100 ± 20mm/min, em ambiente climatizado (± 23ºC e UR do ar de 50%), por 24 horas. A espessura do couro variou de 0,61 a 0,75mm, mas não houve diferença entre os sentidos analisados. O couro apresentou maior resistência à tração no sentido transversal, 25,89N/mm², (P<0,01), comparado ao sentido longitudinal, 14,20 N/mm². O alongamento foi significativamente (P<0,05) maior no sentido longitudinal, 80,8%, em relação ao transversal, 62,6%. Não houve diferença para o rasgamento progressivo entre os tratamentos. O couro apresentou teor de óxido de cromo de 3,8%, graxa de 15,1% e pH e cifra diferencial de 3,5 e 0,5, respectivamente. Os valores nos testes de resistência e físico-químicos apresentados pelo couro indicam que ele pode ser utilizado para a confecção de vestuário e artefatos de couro em geral.

Flexibilidade anterior do tronco no adolecente após o pico da velocidade de crescimento em estatura

Flexibilidade anterior do tronco (FAT) é um componente importante dos exames clínico e de aptidão física utilizado como indicador da função vertebral. O teste mais utilizado para sua quantificação é o sentar-e-alcançar (TSA), que considerara como padrão de normalidade o toque das mãos nos pés, com critérios e parâmetros de análise que independem das variáveis. Neste estudo, investigou-se a FAT em adolescentes, após o pico da velocidade de crescimento em estatura, em função do sexo, da velocidade de execução e dos dados antropométricos. Os índices foram obtidos em centímetros; o peso corporal em kg. Participaram 102 adolescentes, sendo 45 mulheres e 57 homens, entre 16 e 20 anos de idade. Resultados indicam que o fator sexo, dados antropométricos e a velocidade de execução do teste influenciam os índices de flexibilidade; a avaliação da função vertebral não pode ter como critério de normalidade atingir os pés pelo TSA, e que a velocidade rápida leva a melhores resultados. em resumo, os resultados indicam que tocar os pés, é um critério que exclui da normalidade da função vertebral aproximadamente 50% dos adolescentes. Assim, o critério para tomada de decisão quanto ao encaminhamento do adolescente para recuperação de maiores índices de flexibilidade precisa ser revisto.

Interaction between wave and coastal structure: Validation of two lagrangian numerical models with experimental results marine 2011

Numerical modeling of the interaction among waves and coastal structures is a challenge due to the many nonlinear phenomena involved, such as, wave propagation, wave transformation with water depth, interaction among incident and reflected waves, run-up / run-down and wave overtopping. Numerical models based on Lagrangian formulation, like SPH (Smoothed Particle Hydrodynamics), allow simulating complex free surface flows. The validation of these numerical models is essential, but comparing numerical results with experimental data is not an easy task. In the present paper, two SPH numerical models, SPHysics LNEC and SPH UNESP, are validated comparing the numerical results of waves interacting with a vertical breakwater, with data obtained in physical model tests made in one of the LNEC's flume. To achieve this validation, the experimental set-up is determined to be compatible with the Characteristics of the numerical models. Therefore, the flume dimensions are exactly the same for numerical and physical model and incident wave characteristics are identical, which allows determining the accuracy of the numerical models, particularly regarding two complex phenomena: wave-breaking and impact loads on the breakwater. It is shown that partial renormalization, i.e. renormalization applied only for particles near the structure, seems to be a promising compromise and an original method that allows simultaneously propagating waves, without diffusion, and modeling accurately the pressure field near the structure.

Análise do Comportamento Eletromiográfico dos Músculos Estabilizadores Primários e a Relação com a Capacidade Física Funcional de Indivíduos Assintomáticos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Modelo da velocidade crítica em testes de caminhada: validade, reprodutibilidade e aplicabilidade em pacientes de Unidades de Saúde

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Correlação entre propriedades petrográficas e comportamento tecnológico e de alterabilidade das rochas ornamentais silicáticas Diamante Negro (BA), Ocre Itabira e Banco Galaxy (ES)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Qualidade fisico-química, microbiológica e resíduos de antimicrobianos em leite in natura comercializado informalmente em Brotas-SP

Pós-graduação em Medicina Veterinária - FMVZ

Utilização de resíduos agronômicos da mandioca para fabricação de papéis especiais como recurso alternativo para a comunicação visual

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Análise das propriedades físico-mecânicas de painel particulado de eucalipto composto por três camadas com duas variações de pressão

The research aimed to produce sheets of particles with waste processing of Eucalyptus sp bonded with urea-formaldehyde and evaluate the effect of pressure variation in the quality of the boards produced. To do so, the Boards made were divided into two treatments depending on the pressing pressure of 30 to 40 kgf / cm². Once pressings, climatized, the particleboards have been sectioned in test samples, and underwent physical-mechanical tests for determining density, swelling and water absorption, modulus of rupture and elasticity in static bending and internal linking. The particleboards pressed at 40 kgf / cm ² showed the best results

Análise cinemática e cinética do salto vertical de crianças com transtorno do desenvolvimento da coordenação (TDC)

Due to motor difficulties, children with developmental coordination disorder (DCD) doesn't feel motivated to do physical activities, sometimes resulting in a decline of their physical fitness, but it isn't really known for sure the reasons that induct children with DCD to low performances in physical fitness tests, because a lot of tasks that are part of the battery of tests of physical performance are complex in the coordination and/or motor control point of view, like the vertical jump for example. Therefore, the objective of this study was to investigate the factors that induct children with DCD to low performances in physical fitness tests, especially in the vertical jump task. For that, cinematic (duration of the eccentrical phase, duration of the concentrical phase, shift of the mass center and velocity of the mass center), kinetic (potency peak and force peak) and vertical jump performance analysis in two conditions (with the use of arms and without it) were realized in a force platform. The results indicated that children with DCD show a lower performance compared to their peers with typical development (TD), due to a lower potency production

Divergência interpopulacional e interespecífica e processo seletivo atuante nos genes ortólogos a fruitless e Odysseus em Drosophila mojavensis e D. arizonae

Pós-graduação em Biologia Animal - IBILCE

The application of neural networks to the analysis of dissolved gases in insulating oil used in transformers

The state of insulating oils used in transformers is determined through the accomplishment of physical-chemical tests, which determine the state of the oil, as well as the chromatography test, which determines possible faults in the equipment. This article concentrate on determining, from a new methodology, a relationship among the variation of the indices obtained from the physical-chemical tests with those indices supplied by the chromatography tests.The determination of the relationship among the tests is accomplished through the application of neural networks. From the data obtained by physical-chemical tests, the network is capable to determine the relationship among the concentration of the main gases present in a certain sample, which were detected by the chromatography tests.More specifically, the proposed approach uses neural networks of perceptron type constituted of multiple layers. After the process of network training, it is possible to determine the existent relationship between the physical-chemical tests and the amount of gases present in the insulating oil.

Cointegration: Bayesian Significance Test

To estimate causal relationships, time series econometricians must be aware of spurious correlation, a problem first mentioned by Yule (1926). To deal with this problem, one can work either with differenced series or multivariate models: VAR (VEC or VECM) models. These models usually include at least one cointegration relation. Although the Bayesian literature on VAR/VEC is quite advanced, Bauwens et al. (1999) highlighted that "the topic of selecting the cointegrating rank has not yet given very useful and convincing results". The present article applies the Full Bayesian Significance Test (FBST), especially designed to deal with sharp hypotheses, to cointegration rank selection tests in VECM time series models. It shows the FBST implementation using both simulated and available (in the literature) data sets. As illustration, standard non informative priors are used.