Simulation of academic performance rates, estimation of indicators of subjects and of a complete degree

The purpose of this paper is to present a program written in Matlab-Octave for the simulation of the time evolution of student curricula, i.e, how students pass their subjects along time until graduation. The program computes, from the simulations, the academic performance rates for the subjects of the study plan for each semester as well as the overall rates, which are a) the efficiency rate defined as the ratio of the number of students passing the exam to the number of students who registered for it and b) the success rate, defined as the ratio of the number of students passing the exam to the number of students who not only registered for it but also actually took it. Additionally, we compute the rates for the bachelor academic degree which are established for Spain by the National Quality Evaluation and Accreditation Agency (ANECA) and which are the graduation rate (measured as the percentage of students who finish as scheduled in the plan or taking an extra year) and the efficiency rate (measured as the percentage of credits which a student who graduated has really taken). The simulation is done in terms of the probabilities of passing all the subjects in their study plan. The application of the simulator to Polytech students in Madrid, where requirements for passing are specially stiff in first and second year subjects, is particularly relevant to analyze student cohorts and the probabilities of students finishing in the minimum of four years, or taking and extra year or two extra years, and so forth. It is a very useful tool when designing new study plans. The calculation of the probability distribution of the random variable "number of semesters a student has taken to complete the curricula and graduate" is difficult or even unfeasible to obtain analytically, and this is even truer when we incorporate uncertainty in parameter estimation. This is why we apply Monte Carlo simulation which not only provides illustration of the stochastic process but also a method for computation. The stochastic simulator is proving to be a useful tool for identification of the subjects most critical in the distribution of the number of semesters for curriculum vitae (CV) completion and subsequently for a decision making process in terms of CV planning and passing standards in the University. Simulations are performed through a graphical interface where also the results are presented in appropriate figures. The Project has been funded by the Call for Innovation in Education Projects of Universidad Politécnica de Madrid (UPM) through a Project of its school Escuela Técnica Superior de Ingenieros Industriales ETSII during the period September 2010-September 2011.

Is Horizon 2020 really more SME-friendly? A look at the figures. CEPS Commentary, 17 February 2016

Small- and medium-sized enterprises (SMEs) play a key role in the EU economy.[1] According to the latest “SME performance review” published by the European Commission,[2] in 2014 there were 22 million SMEs active in the non-financial business sectors, generating more than €3.7 trillion in added value and employing approximately 90 million people. SMEs’ contribution to the European economy becomes even more apparent if one considers that 99 out of every 100 enterprises active in the EU non-financial economy are SMEs, and that these firms account for about 67% of the total employment and some 60% of the overall added value produced in Europe. Against this background, enhancing the competitiveness of European SMEs is essential in order to foster the competitiveness of the EU economy as a whole. And since the competitiveness of European SMEs in the global arena largely depends on their ability to innovate,[3] unlocking the innovation potential of SMEs becomes pivotal to fostering growth and jobs in Europe.

The effect of innate compliance on the performance of a counterpulsation device

Cardiovascular disease (CVD) continues to be one of the top causes of mortality in the world. World Heart Organization (WHO) reported that in 2004, CVD contributed to almost 30% of death from estimated worldwide death figures of 58 million[1]. Heart failure treatment varies from lifestyle adjustment to heart transplantation; its aims are to reduce HF symptoms, prolong patient survival and minimize risk [2]. One alternative available in the market for HF treatment is Left Ventricular Assist Device (LVAD). Chronic Intermittent Mechanical Support (CIMS) device is a novel (LVAD) heart failure treatment using counterpulsation similar to Intra Aortic Balloon Pumps (IABP). However, the implantation site of the CIMS balloon is in the ascending aorta just distal to aortic valve contrasted with IABP in the descending aorta. Counterpulsation coupled with implantation close to the aortic valve enables comparable flow augmentation with reduced balloon volume. Two prototypes of the CIMS balloon were constructed using rapid prototyping: the straight-body model is a cylindrical tube with a silicone membrane lining with zero expansive compliance. The compliant-body model had a bulging structure that allowed the membrane to expand under native systolic pressure increasing the device’s static compliance to 1.5 mL/mmHg. This study examined the effect of device compliance and vascular compliance on counterpulsating flow augmentation. Both prototypes were tested on a two-element Windkessel model human mock circulatory loop (MCL). The devices were placed just distal to aortic valve and left coronary artery. The MCL mimicked HF with cardiac output of 3 L/min, left ventricular pressure of 85/15 mmHg, aortic pressure of 70/50 mmHg and left coronary artery flow rate of 66 mL/min. The mean arterial pressure (MAP) was calculated to be 57 mmHg. Arterial compliance was set to be1.25 mL/mmHg and 2.5 mL/mmHg. Inflation of the balloon was triggered at the dicrotic notch while deflation was at minimum aortic pressure prior to systole. Important haemodynamics parameters such as left ventricular pressure (LVP), aortic pressure (AoP), cardiac output (CO), left coronary artery flowrate (QcorMean), and dP (Peak aortic diastolic augmentation pressure – AoPmax ) were simultaneously recorded for both non-assisted mode and assisted mode. ANOVA was used to analyse the effect of both factors (balloon and arterial compliance) to flow augmentation. The results showed that for cardiac output and left coronary artery flowrate, there were significant difference between balloon and arterial compliance at p < 0.001. Cardiac output recorded maximum output at 18% for compliant body and stiff arterial compliance. Left coronary artery flowrate also recorded around 20% increase due to compliant body and stiffer arterial compliance. Resistance to blood ejection recorded highest difference for combination of straight body and stiffer arterial compliance. From these results it is clear that both balloon and arterial compliance are statistically significant factors for flow augmentation on peripheral artery and reduction of resistance. Although the result for resistance reduction was different from flow augmentation, these results serves as an important aspect which will influence the future design of the CIMS balloon and its control strategy. References: 1. Mathers C, Boerma T, Fat DM. The Global Burden of disease:2004 update. Geneva: World Heatlh Organization; 2008. 2. Jessup M, Brozena S. Heart Failure. N Engl J Med 2003;348:2007-18.

Double jeopardy:subordinates' worldviews and poor performance as predictors of abusive supervision

Purpose - To test a moderated mediation model where a positive relationship between subordinates’ perceptions of a dangerous world—the extent to which an individual views the world as a dangerous place—and supervisory abuse is mediated by their submission to authority figures, and that this relationship is heightened for more poorly performing employees. Design/Methodology/Approach - Data were obtained from 173 subordinates and 45 supervisors working in different private sector organizations in Pakistan. Findings - Our model was supported. It appears that subordinates’ dangerous worldviews are positively associated with their perceptions of abusive supervision and that this is because such views are likely to lead to greater submission to authority figures. But this is only for those employees who are performing more poorly. Implications - We highlight the possibility that individual differences (worldviews, attitudes to authority figures, and performance levels) may lead employees to become victims of abusive supervision. As such, our research informs organizations on how they may better support supervisors in managing effectively their subordinate relationships and, in particular, subordinate poor performance. Originality/Value - We add to recent work exploring subordinate-focused antecedents of abusive supervision, finding support for the salience of the previously untested constructs of individual worldviews, authoritarian submission, and individual job performance. In so doing we also extend research on dangerous worldviews into a new organizational setting. Finally, our research takes place within a new Pakistani context, adding to the burgeoning non-US based body of empirical work into the antecedents and consequences of abusive supervision.

Leader-member exchange, group- and individual-level procedural justice and reactions to performance appraisals

Previous research has established that relationships with authority figures and procedural justice perceptions are important in terms of the way in which employees react to organizational procedures that affect them. What is less clear are the reasons why exchange quality with authorities is related to perceptions of process fairness and the role of procedural justice climate in this process. Results indicate that individual-level perceptions of procedural justice, but not performance ratings, partially mediate the relationship between exchange quality and reactions to performance appraisals, and that procedural justice climate is positively related to perceptions of procedural justice and appraisal reactions. These results support a more relational than instrumental view of justice perceptions in organizational procedures bound by exchange quality with an authority figure. Our study suggests that it is essential for managers to actively monitor and manage employee perceptions of process fairness at the group and individual levels. © 2015 Wiley Periodicals, Inc.

Lesion detection performance: comparative analysis of low-dose CT data of the chest on two hybrid imaging systems

Incidental findings on low-dose CT images obtained during hybrid imaging are an increasing phenomenon as CT technology advances. Understanding the diagnostic value of incidental findings along with the technical limitations is important when reporting image results and recommending follow-up, which may result in an additional radiation dose from further diagnostic imaging and an increase in patient anxiety. This study assessed lesions incidentally detected on CT images acquired for attenuation correction on two SPECT/CT systems. Methods: An anthropomorphic chest phantom containing simulated lesions of varying size and density was imaged on an Infinia Hawkeye 4 and a Symbia T6 using the low-dose CT settings applied for attenuation correction acquisitions in myocardial perfusion imaging. Twenty-two interpreters assessed 46 images from each SPECT/CT system (15 normal images and 31 abnormal images; 41 lesions). Data were evaluated using a jackknife alternative free-response receiver-operating-characteristic analysis (JAFROC). Results: JAFROC analysis showed a significant difference (P < 0.0001) in lesion detection, with the figures of merit being 0.599 (95% confidence interval, 0.568, 0.631) and 0.810 (95% confidence interval, 0.781, 0.839) for the Infinia Hawkeye 4 and Symbia T6, respectively. Lesion detection on the Infinia Hawkeye 4 was generally limited to larger, higher-density lesions. The Symbia T6 allowed improved detection rates for midsized lesions and some lower-density lesions. However, interpreters struggled to detect small (5 mm) lesions on both image sets, irrespective of density. Conclusion: Lesion detection is more reliable on low-dose CT images from the Symbia T6 than from the Infinia Hawkeye 4. This phantom-based study gives an indication of potential lesion detection in the clinical context as shown by two commonly used SPECT/CT systems, which may assist the clinician in determining whether further diagnostic imaging is justified.