Calculation of fractional derivatives of noisy data with genetic algorithms

This paper addresses the calculation of derivatives of fractional order for non-smooth data. The noise is avoided by adopting an optimization formulation using genetic algorithms (GA). Given the flexibility of the evolutionary schemes, a hierarchical GA composed by a series of two GAs, each one with a distinct fitness function, is established.

A system verification strategy based on the BST infrastructure

A good verification strategy should bring near the simulation and real functioning environments. In this paper we describe a system-level co-verification strategy that uses a common flow for functional simulation, timing simulation and functional debug. This last step requires using a BST infrastructure, now widely available on commercial devices, specially on FPGAs with medium/large pin-counts.

Characterisation of noisy speech channels in 2G and 3G mobile networks

As the wireless cellular market reaches competitive levels never seen before, network operators need to focus on maintaining Quality of Service (QoS) a main priority if they wish to attract new subscribers while keeping existing customers satisfied. Speech Quality as perceived by the end user is one major example of a characteristic in constant need of maintenance and improvement. It is in this topic that this Master Thesis project fits in. Making use of an intrusive method of speech quality evaluation, as a means to further study and characterize the performance of speech codecs in second-generation (2G) and third-generation (3G) technologies. Trying to find further correlation between codecs with similar bit rates, along with the exploration of certain transmission parameters which may aid in the assessment of speech quality. Due to some limitations concerning the audio analyzer equipment that was to be employed, a different system for recording the test samples was sought out. Although the new designed system is not standard, after extensive testing and optimization of the system's parameters, final results were found reliable and satisfactory. Tests include a set of high and low bit rate codecs for both 2G and 3G, where values were compared and analysed, leading to the outcome that 3G speech codecs perform better, under the approximately same conditions, when compared with 2G. Reinforcing the idea that 3G is, with no doubt, the best choice if the costumer looks for the best possible listening speech quality. Regarding the transmission parameters chosen for the experiment, the Receiver Quality (RxQual) and Received Energy per Chip to the Power Density Ratio (Ec/N0), these were subject to speech quality correlation tests. Final results of RxQual were compared to those of prior studies from different researchers and, are considered to be of important relevance. Leading to the confirmation of RxQual as a reliable indicator of speech quality. As for Ec/N0, it is not possible to state it as a speech quality indicator however, it shows clear thresholds for which the MOS values decrease significantly. The studied transmission parameters show that they can be used not only for network management purposes but, at the same time, give an expected idea to the communications engineer (or technician) of the end-to-end speech quality consequences. With the conclusion of the work new ideas for future studies come to mind. Considering that the fourth-generation (4G) cellular technologies are now beginning to take an important place in the global market, as the first all-IP network structure, it seems of great relevance that 4G speech quality should be subject of evaluation. Comparing it to 3G, not only in narrowband but also adding wideband scenarios with the most recent standard objective method of speech quality assessment, POLQA. Also, new data found on Ec/N0 tests, justifies further research studies with the intention of validating the assumptions made in this work.

Response Time Analysis of Slotted WiDOM in Noisy Wireless Channels

International Conference on Emerging Technologies and Factory Automation (ETFA 2015), Industrial Communication Technologies and Systems, Luxembourg, Luxembourg.

Formal Contracts for Runtime Verification Support in the Ada Programming Language

Poster presented in The 28th GI/ITG International Conference on Architecture of Computing Systems (ARCS 2015). 24 to 26, Mar, 2015. Porto, Portugal.

Toward a Run-Time Verification Framework for Real-Time Safety-Critical Systems

Presented at SEMINAR "ACTION TEMPS RÉEL:INFRASTRUCTURES ET SERVICES SYSTÉMES". 10, Apr, 2015. Brussels, Belgium.

Monte Carlo simulations for dosimetric verification in photon and electron beam radiotherapy

Dissertação para obtenção do Grau de Doutor em Engenharia Biomédica

Constraint-based verification of imperative programs

work presented in the context of the European Master’s program in Computational Logic, as the partial requirement for obtaining Master of Science degree in Computational Logic

Verification of analog circuits in power-down mode

Dissertação para obtenção do Grau de Mestre em Engenharia Eletrotécnica e Computadores

Planning and verification of multipath routing protocols

Conventionally the problem of the best path in a network refers to the shortest path problem. However, for the vast majority of networks present nowadays this solution has some limitations which directly affect their proper functioning, as well as an inefficient use of their potentialities. Problems at the level of large networks where graphs of high complexity are commonly present as well as the appearing of new services and their respective requirements, are intrinsically related to the inability of this solution. In order to overcome the needs present in these networks, a new approach to the problem of the best path must be explored. One solution that has aroused more interest in the scientific community considers the use of multiple paths between two network nodes, where they can all now be considered as the best path between those nodes. Therefore, the routing will be discontinued only by minimizing one metric, where only one path between nodes is chosen, and shall be made by the selection of one of many paths, thereby allowing the use of a greater diversity of the present paths (obviously, if the network consents). The establishment of multi-path routing in a given network has several advantages for its operation. Its use may well improve the distribution of network traffic, improve recovery time to failure, or it can still offer a greater control of the network by its administrator. These factors still have greater relevance when networks have large dimensions, as well as when their constitution is of high complexity, such as the Internet, where multiple networks managed by different entities are interconnected. A large part of the growing need to use multipath protocols is associated to the routing made based on policies. Therefore, paths with different characteristics can be considered with equal level of preference, and thus be part of the solution for the best way problem. To perform multi-path routing using protocols based only on the destination address has some limitations but it is possible. Concepts of graph theory of algebraic structures can be used to describe how the routes are calculated and classified, enabling to model the routing problem. This thesis studies and analyzes multi-path routing protocols from the known literature and derives a new algebraic condition which allows the correct operation of these protocols without any network restriction. It also develops a range of software tools that allows the planning and the respective verification/validation of new protocols models according to the study made.

On the verification of architectural reconfigurations

In a reconfigurable system, the response to contextual or internal change may trigger reconfiguration events which, on their turn, activate scripts that change the system׳s architecture at runtime. To be safe, however, such reconfigurations are expected to obey the fundamental principles originally specified by its architect. This paper introduces an approach to ensure that such principles are observed along reconfigurations by verifying them against concrete specifications in a suitable logic. Architectures, reconfiguration scripts, and principles are specified in Archery, an architectural description language with formal semantics. Principles are encoded as constraints, which become formulas of a two-layer graded hybrid logic, where the upper layer restricts reconfigurations, and the lower layer constrains the resulting configurations. Constraints are verified by translating them into logic formulas, which are interpreted over models derived from Archery specifications of architectures and reconfigurations. Suitable notions of bisimulation and refinement, to which the architect may resort to compare configurations, are given, and their relationship with modal validity is discussed.

Verificación Formal de Sistemas basada Formal Software Verification based on Automated Analysisen Análisis Automático.

Identificación y caracterización del problema. Uno de los problemas más importantes asociados con la construcción de software es la corrección del mismo. En busca de proveer garantías del correcto funcionamiento del software, han surgido una variedad de técnicas de desarrollo con sólidas bases matemáticas y lógicas conocidas como métodos formales. Debido a su naturaleza, la aplicación de métodos formales requiere gran experiencia y conocimientos, sobre todo en lo concerniente a matemáticas y lógica, por lo cual su aplicación resulta costosa en la práctica. Esto ha provocado que su principal aplicación se limite a sistemas críticos, es decir, sistemas cuyo mal funcionamiento puede causar daños de magnitud, aunque los beneficios que sus técnicas proveen son relevantes a todo tipo de software. Poder trasladar los beneficios de los métodos formales a contextos de desarrollo de software más amplios que los sistemas críticos tendría un alto impacto en la productividad en tales contextos. Hipótesis. Contar con herramientas de análisis automático es un elemento de gran importancia. Ejemplos de esto son varias herramientas potentes de análisis basadas en métodos formales, cuya aplicación apunta directamente a código fuente. En la amplia mayoría de estas herramientas, la brecha entre las nociones a las cuales están acostumbrados los desarrolladores y aquellas necesarias para la aplicación de estas herramientas de análisis formal sigue siendo demasiado amplia. Muchas herramientas utilizan lenguajes de aserciones que escapan a los conocimientos y las costumbres usuales de los desarrolladores. Además, en muchos casos la salida brindada por la herramienta de análisis requiere cierto manejo del método formal subyacente. Este problema puede aliviarse mediante la producción de herramientas adecuadas. Otro problema intrínseco a las técnicas automáticas de análisis es cómo se comportan las mismas a medida que el tamaño y complejidad de los elementos a analizar crece (escalabilidad). Esta limitación es ampliamente conocida y es considerada crítica en la aplicabilidad de métodos formales de análisis en la práctica. Una forma de atacar este problema es el aprovechamiento de información y características de dominios específicos de aplicación. Planteo de objetivos. Este proyecto apunta a la construcción de herramientas de análisis formal para contribuir a la calidad, en cuanto a su corrección funcional, de especificaciones, modelos o código, en el contexto del desarrollo de software. Más precisamente, se busca, por un lado, identificar ambientes específicos en los cuales ciertas técnicas de análisis automático, como el análisis basado en SMT o SAT solving, o el model checking, puedan llevarse a niveles de escalabilidad superiores a los conocidos para estas técnicas en ámbitos generales. Se intentará implementar las adaptaciones a las técnicas elegidas en herramientas que permitan su uso a desarrolladores familiarizados con el contexto de aplicación, pero no necesariamente conocedores de los métodos o técnicas subyacentes. Materiales y métodos a utilizar. Los materiales a emplear serán bibliografía relevante al área y equipamiento informático. Métodos. Se emplearán los métodos propios de la matemática discreta, la lógica y la ingeniería de software. Resultados esperados. Uno de los resultados esperados del proyecto es la individualización de ámbitos específicos de aplicación de métodos formales de análisis. Se espera que como resultado del desarrollo del proyecto surjan herramientas de análisis cuyo nivel de usabilidad sea adecuado para su aplicación por parte de desarrolladores sin formación específica en los métodos formales utilizados. Importancia del proyecto. El principal impacto de este proyecto será la contribución a la aplicación práctica de técnicas formales de análisis en diferentes etapas del desarrollo de software, con la finalidad de incrementar su calidad y confiabilidad. A crucial factor for software quality is correcteness. Traditionally, formal approaches to software development concentrate on functional correctness, and tackle this problem basically by being based on well defined notations founded on solid mathematical grounds. This makes formal methods better suited for analysis, due to their precise semantics, but they are usually more complex, and require familiarity and experience with the manipulation of mathematical definitions. So, their acceptance by software engineers is rather restricted, and formal methods applications have been confined to critical systems. Nevertheless, it is obvious that the advantages that formal methods provide apply to any kind of software system. It is accepted that appropriate software tool support for formal analysis is essential, if one seeks providing support for software development based on formal methods. Indeed, some of the relatively recent sucesses of formal methods are accompanied by good quality tools that automate powerful analysis mechanisms, and are even integrated in widely used development environments. Still, most of these tools either concentrate on code analysis, and in many cases are still far from being simple enough to be employed by software engineers without experience in formal methods. Another important problem for the adoption of tool support for formal methods is scalability. Automated software analysis is intrinsically complex, and thus techniques do not scale well in the general case. In this project, we will attempt to identify particular modelling, design, specification or coding activities in software development processes where to apply automated formal analysis techniques. By focusing in very specific application domains, we expect to find characteristics that might be exploited to increase the scalability of the corresponding analyses, compared to the general case.

Sistemas de Tipos para Verificación de Programas Concurrentes. Type Systems for Concurrent Programs Verification.

La programación concurrente es una tarea difícil aún para los más experimentados programadores. Las investigaciones en concurrencia han dado como resultado una gran cantidad de mecanismos y herramientas para resolver problemas de condiciones de carrera de datos y deadlocks, problemas que surgen por el mal uso de los mecanismos de sincronización. La verificación de propiedades interesantes de programas concurrentes presenta dificultades extras a los programas secuenciales debido al no-determinismo de su ejecución, lo cual resulta en una explosión en el número de posibles estados de programa, haciendo casi imposible un tratamiento manual o aún con la ayuda de computadoras. Algunos enfoques se basan en la creación de lenguajes de programación con construcciones con un alto nivel de abstración para expresar concurrencia y sincronización. Otros enfoques tratan de desarrollar técnicas y métodos de razonamiento para demostrar propiedades, algunos usan demostradores de teoremas generales, model-checking o algortimos específicos sobre un determinado sistema de tipos. Los enfoques basados en análisis estático liviano utilizan técnicas como interpretación abstracta para detectar ciertos tipos de errores, de una manera conservativa. Estas técnicas generalmente escalan lo suficiente para aplicarse en grandes proyectos de software pero los tipos de errores que pueden detectar es limitada. Algunas propiedades interesantes están relacionadas a condiciones de carrera y deadlocks, mientras que otros están interesados en problemas relacionados con la seguridad de los sistemas, como confidencialidad e integridad de datos. Los principales objetivos de esta propuesta es identificar algunas propiedades de interés a verificar en sistemas concurrentes y desarrollar técnicas y herramientas para realizar la verificación en forma automática. Para lograr estos objetivos, se pondrá énfasis en el estudio y desarrollo de sistemas de tipos como tipos dependientes, sistema de tipos y efectos, y tipos de efectos sensibles al flujo de datos y control. Estos sistemas de tipos se aplicarán a algunos modelos de programación concurrente como por ejemplo, en Simple Concurrent Object-Oriented Programming (SCOOP) y Java. Además se abordarán propiedades de seguridad usando sistemas de tipos específicos. Concurrent programming has remained a dificult task even for very experienced programmers. Concurrency research has provided a rich set of tools and mechanisms for dealing with data races and deadlocks that arise of incorrect use of synchronization. Verification of most interesting properties of concurrent programs is a very dificult task due to intrinsic non-deterministic nature of concurrency, resulting in a state explosion which make it almost imposible to be manually treat and it is a serious challenge to do that even with help of computers. Some approaches attempts create programming languages with higher levels of abstraction for expressing concurrency and synchronization. Other approaches try to develop reasoning methods to prove properties, either using general theorem provers, model-checking or specific algorithms on some type systems. The light-weight static analysis approach apply techniques like abstract interpretation to find certain kind of bugs in a conservative way. This techniques scale well to be applied in large software projects but the kind of bugs they may find are limited. Some interesting properties are related to data races and deadlocks, while others are interested in some security problems like confidentiality and integrity of data. The main goals of this proposal is to identify some interesting properties to verify in concurrent systems and develop techniques and tools to do full automatic verification. The main approach will be the application of type systems, as dependent types, type and effect systems, and flow-efect types. Those type systems will be applied to some models for concurrent programming as Simple Concurrent Object-Oriented Programming (SCOOP) and Java. Other goals include the analysis of security properties also using specific type systems.

Verificación de Sistemas Basada en Teoría de Tipos. System verification in type theory

Este proyecto se enmarca en la utlización de métodos formales (más precisamente, en la utilización de teoría de tipos) para garantizar la ausencia de errores en programas. Por un lado se plantea el diseño de nuevos algoritmos de chequeo de tipos. Para ello, se proponen nuevos algoritmos basados en la idea de normalización por evaluación que sean extensibles a otros sistemas de tipos. En el futuro próximo extenderemos resultados que hemos conseguido recientemente [16,17] para obtener: una simplificación de los trabajos realizados para sistemas sin regla eta (acá se estudiarán dos sistemas: a la Martin Löf y a la PTS), la formulación de estos chequeadores para sistemas con variables, generalizar la noción de categoría con familia utilizada para dar semántica a teoría de tipos, obtener una formulación categórica de la noción de normalización por evaluación y finalmente, aplicar estos algoritmos a sistemas con reescrituras. Para los primeros resultados esperados mencionados, nos proponemos como método adaptar las pruebas de [16,17] a los nuevos sistemas. La importancia radica en que permitirán tornar más automatizables (y por ello, más fácilmente utilizables) los asistentes de demostración basados en teoría de tipos. Por otro lado, se utilizará la teoría de tipos para certificar compiladores, intentando llevar adelante la propuesta nunca explorada de [22] de utilizar un enfoque abstracto basado en categorías funtoriales. El método consistirá en certificar el lenguaje "Peal" [29] y luego agregar sucesivamente funcionalidad hasta obtener Forsythe [23]. En este período esperamos poder agregar varias extensiones. La importancia de este proyecto radica en que sólo un compilador certificado garantiza que un programa fuente correcto se compile a un programa objeto correcto. Es por ello, crucial para todo proceso de verificación que se base en verificar código fuente. Finalmente, se abordará la formalización de sistemas con session types. Los mismos han demostrado tener fallas en sus formulaciones [30], por lo que parece conveniente su formalización. Durante la marcha de este proyecto, esperamos tener alguna formalización que dé lugar a un algoritmo de chequeo de tipos y a demostrar las propiedades usuales de los sistemas. La contribución es arrojar un poco de luz sobre estas formulaciones cuyos errores revelan que el tema no ha adquirido aún suficiente madurez o comprensión por parte de la comunidad. This project is about using type theory to garantee program correctness. It follows three different directions: 1) Finding new type-checking algorithms based on normalization by evaluation. First, we would show that recent results like [16,17] extend to other type systems like: Martin-Löf´s type theory without eta rule, PTSs, type systems with variables (in addition to systems in [16,17] which are a la de Bruijn), systems with rewrite rules. This will be done by adjusting the proofs in [16,17] so that they apply to such systems as well. We will also try to obtain a more general definition of categories with families and normalization by evaluation, formulated in categorical terms. We expect this may turn proof-assistants more automatic and useful. 2) Exploring the proposal in [22] to compiler construction for Algol-like languages using functorial categories. According to [22] such approach is suitable for verifying compiler correctness, claim which was never explored. First, the language Peal [29] will be certified in type theory and we will gradually add funtionality to it until a correct compiler for the language Forsythe [23] is obtained. 3) Formilizing systems for session types. Several proposals have shown to be faulty [30]. This means that a formalization of it may contribute to the general understanding of session types.

Product-line specification and verification with feature-oriented contracts

Magdeburg, Univ., Fak. für Informatik, Diss., 2015