A knowledge management system to optimise comfort throughout the building life-cycle

Comfort is, in essence, satisfaction with the environment, and with respect to the indoor environment it is primarily satisfaction with the thermal conditions and air quality. Improving comfort has social, health and economic benefits, and is more financially significant than any other building cost. Despite this, comfort is not strictly managed throughout the building lifecycle. This is mainly due to the lack of an appropriate system to adequately manage comfort knowledge through the construction process into operation. Previous proposals to improve knowledge management have not been successfully adopted by the construction industry. To address this, the BabySteps approach was devised. BabySteps is an approach, proposed by this research, which states that for an innovation to be adopted into the industry it must be implementable through a number of small changes. This research proposes that improving the management of comfort knowledge will improve comfort. ComMet is a new methodology proposed by this research that manages comfort knowledge. It enables comfort knowledge to be captured, stored and accessed throughout the building life-cycle and so allowing it to be re-used in future stages of the building project and in future projects. It does this using the following: Comfort Performances – These are simplified numerical representations of the comfort of the indoor environment. Comfort Performances quantify the comfort at each stage of the building life-cycle using standard comfort metrics. Comfort Ratings - These are a means of classifying the comfort conditions of the indoor environment according to an appropriate standard. Comfort Ratings are generated by comparing different Comfort Performances. Comfort Ratings provide additional information relating to the comfort conditions of the indoor environment, which is not readily determined from the individual Comfort Performances. Comfort History – This is a continuous descriptive record of the comfort throughout the project, with a focus on documenting the items and activities, proposed and implemented, which could potentially affect comfort. Each aspect of the Comfort History is linked to the relevant comfort entity it references. These three components create a comprehensive record of the comfort throughout the building lifecycle. They are then stored and made available in a common format in a central location which allows them to be re-used ad infinitum. The LCMS System was developed to implement the ComMet methodology. It uses current and emerging technologies to capture, store and allow easy access to comfort knowledge as specified by ComMet. LCMS is an IT system that is a combination of the following six components: Building Standards; Modelling & Simulation; Physical Measurement through the specially developed Egg-Whisk (Wireless Sensor) Network; Data Manipulation; Information Recording; Knowledge Storage and Access.Results from a test case application of the LCMS system - an existing office room at a research facility - highlighted that while some aspects of comfort were being maintained, the building’s environment was not in compliance with the acceptable levels as stipulated by the relevant building standards. The implementation of ComMet, through LCMS, demonstrates how comfort, typically only considered during early design, can be measured and managed appropriately through systematic application of the methodology as means of ensuring a healthy internal environment in the building.

Skin-to-Skin contact

Skin to skin contact facilitates the initiation of breast feeding, neonatal thermoregulation and the promotion of maternal-infant attachment. However, there are cultural influences in society and in the labour ward that may make implemention of skin to skin contact difficult.

Cleanliness Is Next To Godliness

Short story

Nuclear factor I-C links platelet-derived growth factor and transforming growth factor beta1 signaling to skin wound healing progression.

Transforming growth factor beta (TGF-beta) and platelet-derived growth factor A (PDGFAlpha) play a central role in tissue morphogenesis and repair, but their interplay remain poorly understood. The nuclear factor I C (NFI-C) transcription factor has been implicated in TGF-beta signaling, extracellular matrix deposition, and skin appendage pathologies, but a potential role in skin morphogenesis or healing had not been assessed. To evaluate this possibility, we performed a global gene expression analysis in NFI-C(-/-) and wild-type embryonic primary murine fibroblasts. This indicated that NFI-C acts mostly to repress gene expression in response to TGF-beta1. Misregulated genes were prominently overrepresented by regulators of connective tissue inflammation and repair. In vivo skin healing revealed a faster inflammatory stage and wound closure in NFI-C(-/-) mice. Expression of PDGFA and PDGF-receptor alpha were increased in wounds of NFI-C(-/-) mice, explaining the early recruitment of macrophages and fibroblasts. Differentiation of fibroblasts to contractile myofibroblasts was also elevated, providing a rationale for faster wound closure. Taken together with the role of TGF-beta in myofibroblast differentiation, our results imply a central role of NFI-C in the interplay of the two signaling pathways and in regulation of the progression of tissue regeneration.

Niagara Falls Next to the River - Postcards

Board with six postcards of Niagara Falls. First postcard, In Victoria Park, Niagara Falls, Ont, Canada. Second postcard, entrance to Ontario Power Co. 's Works, Niagara Falls, Canada. Third postcard, The Refectory, Queen Victoria Park, Niagara Falls, Canada. Fourth postcard, Niagara Glen Inn, Niagara Glen, Canada. Fifth postcard, The Restaurant, Victoria Park, Niagara Falls, Canadian Side. Sixth postcard, The Administration Building, Victoria Park, Niagara Falls, Canada.

Photograph - Women standing next to Car

A photograph of four women all in hats standing next to a car.

Photograph - Women standing next to Car #2

A photograph of four women standing next to a car.

Registered Nurses' Perceptions about Facilitators and Barriers to Maternal Skin to Skin Contact in the Operating Room

Abstract It is recommended that all new mothers experience skin-to-skin contact (SSC) with their newborns immediately after birth. However, SSC is not commonly practiced after cesarean deliveries. To understand facilitators and barriers regarding SSC in the operating room (OR), a descriptive online and paper survey was conducted with 68 Registered Nurses from four hospitals in Ontario. The theory of planned behavior framed the study. Nurses had positive attitudes, and believed most health care team members supported SSC in the OR, but were uncertain about their control over the behavior. Nurses who had practiced the behavior in the past had more positive attitudinal and normative beliefs, and perceived some barriers as less difficult. Attitude and past behavior were the only significant multivariate predictors of intention to practice SSC in the future. Results suggest that shifting attitude and supporting more experience with the practice may increase nurses’ implementation of SSC in the OR.

Next to nothing

An eighteen-line lyric

Next-to-leading order QCD corrections to the polarized hadroproduction of heavy flavors

We present the complete next-to-leading order QCD corrections to the polarized hadroproduction of heavy flavors which soon will be studied experimentally in polarized pp collisions at the BNL Relativistic Heavy Ion Collider (RHIC) in order to constrain the polarized gluon density Δg. It is demonstrated that the dependence on unphysical renormalization and factorization scales is strongly reduced beyond the leading order. The sensitivity of the charm quark spin asymmetry to Δg is analyzed in some detail, including the limited detector acceptance for leptons from charm quark decays at the BNL RHIC.

Erratum to: “Photoproduction of heavy quarks in next-to-leading order QCD with longitudinally polarized initial states” [Nucl. Phys. B 540 (1999) 345]

There are three trivial misprints in our paper.

Photoproduction of heavy quarks in next-to-leading order QCD with longitudinally polarized initial states

We present all relevant details of our calculation of the complete next-to-leading order O(αS2α) QCD corrections to heavy flavor photoproduction with longitudinally polarized point-like photons and hadrons. In particular we provide analytical results for the virtual plus soft gluon cross section. We carefully address the relevance of remaining theoretical uncertainties by varying, for instance, the factorization and renormalization scales independently. Such studies are of importance for a meaningful first direct determination of the polarized gluon density Δg from the total charm production spin asymmetry by the upcoming COMPASS experiment. It is shown that the scale uncertainty is considerably reduced in next-to-leading order, but the dependence on the charm quark mass is sizable at fixed target energies. Finally, we study several differential single-inclusive heavy quark distributions and, for the polarized HERA option, the total bottom spin asymmetry.

Next-to-leading order QCD corrections to the polarized photoproduction of heavy flavors

We present a calculation of the next-to-leading order ... QCD corrections to heavy flavor photoproduction with longitudinally polarized beams. We apply our results to study the longitudinal spin asymmetry for the total charm quark production cross section which will be utilized by the forthcoming COMPASS experiment at CERN to obtain first direct information on the polarized gluon density Δg. We also briefly discuss the main theoretical uncertainties inherent in this calculation. In particular we demonstrate that the factorization scale dependence is considerably reduced in next-to-leading order.

Towards a digital representation of physical phenomena to assess comfort in future environments

This paper presents the concept and a test implementation of a digital representation of the physical world designed to assess comfort quality in
future environments. An integrated set of physical phenomena is modeled three-dimensionally to investigate the dynamic behavior of design objects
holistically.

The formulation supports the integration of computational simulation in the performance-based design process. It employs the principles of
geometrical and physical selfcontainedness to avoid that complex geometrical and physical circumstances have to be specified at design time. The concepts of congeneric cells and congeneric conjunctions are
introduced to simulate various physical phenomena simultaneously with a uniformly structured set of equations.

The concept, the prototype implementation and selected test cases are presented. Although it was not possible to implement all features and model parts completely, the research and the discussion of its achievements make valuable contributions towards more effective integration of computational simulation in the performance-based design process.

Towards a universal and integrated digital representation of physical phenomena: a model to investigate comfort and energy efficiency in future environments

This thesis describes the exploration and the development of computational means to investigate the behaviour of design objects before they are available for investigation in the physical world. The motivation is to inform the design process about the design object's performance in order to achieve better--more performance-oriented--design outcomes in the sense of energy efficiency and comfort performance than can be achieved by conventional design techniques.