Effects of Perilipin (PLIN) Gene Variation on Metabolic Syndrome Risk and Weight Loss in Obese Children and Adolescents

Context: Genetic polymorphisms at the perilipin (PLIN) locus have been investigated for their potential utility as markers for obesity and metabolic syndrome (MS). We examined in obese children and adolescents (OCA) aged 7-14 yr the association of single-nucleotide polymorphisms (SNP) at the PLIN locus with anthropometric, metabolic traits, and weight loss after 20-wk multi-disciplinary behavioral and nutritional treatment without medication. Design: A total of 234 OCA [body mass index (BMI = 30.4 +/- 4.4 kg/m(2); BMI Z-score = 2.31 +/- 0.4) were evaluated at baseline and after intervention. We genotyped four SNPs (PLIN1 6209T -> C, PLIN4 11482G -> A, PLIN5 13041A -> G, and PLIN6 14995A -> T). Results: Allele frequencies were similar to other populations, PLIN1 and PLIN4 were in linkage disequilibrium (D` = 0.999; P < 0.001). At baseline, no anthropometric differences were observed, but minor allele A at PLIN4 was associated with higher triglycerides (111 +/- 49 vs. 94 +/- 42 mg/dl; P = 0.003), lower high-density lipoprotein cholesterol (40 +/- 9 vs. 44 +/- 10 mg/dl; P = 0.003) and higher homeostasis model assessment for insulin resistance (4.0 +/- 2.3 vs. 3.5 +/- 2.1; P +/- 0.015). Minor allele A at PLIN4 was associated with MS risk (age and sex adjusted) hazard ratio 2.4 (95% confidence interval = 1.1-4.9) for genotype GA and 3.5 (95% confidence interval = 1.2-9.9) for AA. After intervention, subjects carrying minor allele T at PLIN6 had increased weight loss (3.3 +/- 3.7 vs. 1.9 +/- 3.4 kg; P = 0.002) and increased loss of the BMI Z-score (0.23 +/- 0.18 vs. 0.18 +/- 0.15; P +/- 0.003). Due to group size, risk of by-chance findings cannot be excluded. Conclusion: The minor A allele at PLIN4 was associated with higher risk of MS at baseline, whereas the PLIN6 SNP was associated with better weight loss, suggesting that these polymorphisms may predict outcome strategies based on multidisciplinary treatment for OCA. (J Clin Endocrinol Metab 93: 4933-4940, 2008)

Actively shielded multi-layer gradient coil designs with improved cooling properties

In standard cylindrical gradient coils consisting of a single layer of wires, a limiting factor in achieving very large magnetic field gradients is the rapid increase in coil resistance with efficiency. This is a particular problem in small-bore scanners, such as those used for MR microscopy. By adopting a multi-layer design in which the coil wires are allowed to spread out into multiple layers wound at increasing radii, a more favourable scaling of resistance with efficiency is achieved, thus allowing the design of more powerful gradient coils with acceptable resistance values. Previously this approach has been applied to the design of unshielded, longitudinal, and transverse gradient coils. Here, the multi-layer approach has been extended to allow the design of actively shielded multi-layer gradient coils, and also to produce coils exhibiting enhanced cooling characteristics. An iterative approach to modelling the steady-state temperature distribution within the coil has also been developed. Results indicate that a good level of screening can be achieved in multi-layer coils, that small versions of such coils can yield higher efficiencies at fixed resistance than conventional two-layer (primary and screen) coils, and that performance improves as the number of layers of increases. Simulations show that by optimising multi-layer coils for cooling it is possible to achieve significantly higher gradient strengths at a fixed maximum operating temperature. A four-layer coil of 8 mm inner diameter has been constructed and used to test the steady-state temperature model. (C) 2003 Elsevier Inc. All rights reserved.

Indicadores de Ciência, Tecnologia & Inovação : análise da produção científica e tecnológica da área de conhecimento em Engenharia Civil na Base de Dados da Web of Science

Esta dissertação trata da análise da produção científica e tecnológica internacional e brasileira na área de conhecimento Engenharia Civil, por meio de indicadores bibliométricos. A área Engenharia Civil foi escolhida em razão da sua relevância para o desenvolvimento econômico do país. No entanto, em termos absolutos e relativos, está entre os setores tecnologicamente mais atrasados da economia. A bibliometria é uma disciplina com alcance multidisciplinar que estuda o uso e os aspectos quantitativos da produção científica registrada. Os indicadores de produção científica são objeto de análise de várias áreas do conhecimento, tanto para o planejamento e a execução de políticas públicas de vários setores quanto para maior conhecimento da comunidade científica sobre o sistema em que está inserida. A metodologia utilizada para a elaboração deste estudo descritivo de caráter exploratório foi a análise documental e bibliométrica, baseada em dados das publicações científicas, no período de 1970 a 2012, e tecnológicas, no período de 2001 a 2012, da área Engenharia Civil, indexadas nas bases de dados Science Citattion Index Expanded (SCI); Social Science Citation Index (SSCI); Conference Proceedings Citation Index (CPCI) e da Derwent Innovations Index (DII), que compõem a base de dados multidisciplinar da Web of Sicence (WoS). As informações foram qualificadas e quantificadas com o auxílio do software bibliométrico VantagePoint®. Os resultados obtidos confirmaram o baixo número de publicações científicas e tecnológicas na área de conhecimento Engenharia Civil de autores filiados a instituições de ensino e pesquisa brasileiras quando comparados aos dos países industrializados. Existe um conjunto de fortes condicionantes que ultrapassam o poder de decisão e de influência da academia, dificultando e limitando a disseminação das pesquisas e patentes brasileiras relacionadas a fatores de caráter sistêmico e cultural. A possibilidade de análise de indicadores de produção científica e tecnológica na Engenharia Civil contribui para criar políticas que, se utilizadas por agências de fomento, podem subsidiar investimentos mais fundamentados por parte dos governos e da iniciativa privada, a exemplo do que é feito por outros setores industriais.

Multi-agent management system for electric vehicle charging

This paper proposes an implementation, based on a multi-agent system, of a management system for automated negotiation of electricity allocation for charging electric vehicles (EVs) and simulates its performance. The widespread existence of charging infrastructures capable of autonomous operation is recognised as a major driver towards the mass adoption of EVs by mobility consumers. Eventually, conflicting requirements from both power grid and EV owners require automated middleman aggregator agents to intermediate all operations, for example, bidding and negotiation, between these parts. Multi-agent systems are designed to provide distributed, modular, coordinated and collaborative management systems; therefore, they seem suitable to address the management of such complex charging infrastructures. Our solution consists in the implementation of virtual agents to be integrated into the management software of a charging infrastructure. We start by modelling the multi-agent architecture using a federated, hierarchical layers setup and as well as the agents' behaviours and interactions. Each of these layers comprises several components, for example, data bases, decision-making and auction mechanisms. The implementation of multi-agent platform and auctions rules, and of models for battery dynamics, is also addressed. Four scenarios were predefined to assess the management system performance under real usage conditions, considering different types of profiles for EVs owners', different infrastructure configurations and usage and different loads on the utility grid (where real data from the concession holder of the Portuguese electricity transmission grid is used). Simulations carried with the four scenarios validate the performance of the modelled system while complying with all the requirements. Although all of these have been performed for one charging station alone, a multi-agent design may in the future be used for the higher level problem of distributing energy among charging stations. Copyright (c) 2014 John Wiley & Sons, Ltd.

Intelligent decision support systems for collaboration in industrial plants

Dissertação apresentada para obtenção do Grau de Doutor em Sistemas de Informação Industriais, Engenharia Electrotécnica, pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

Emotion-oriented interventions for environment and the facilitation of pro-environmental behavior

Dissertação para obtenção do Grau de Doutor em Ambiente, pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

A pilot study combining individual-based smoking cessation counseling, pharmacotherapy, and dental hygiene intervention.

BACKGROUND: Dentists are in a unique position to advise smokers to quit by providing effective counseling on the various aspects of tobacco-induced diseases. The present study assessed the feasibility and acceptability of integrating dentists in a medical smoking cessation intervention. METHODS: Smokers willing to quit underwent an 8-week smoking cessation intervention combining individual-based counseling and nicotine replacement therapy and/or bupropion, provided by a general internist. In addition, a dentist performed a dental exam, followed by an oral hygiene treatment and gave information about chronic effects of smoking on oral health. Outcomes were acceptability, global satisfaction of the dentist's intervention, and smoking abstinence at 6-month. RESULTS: 39 adult smokers were included, and 27 (69%) completed the study. Global acceptability of the dental intervention was very high (94% yes, 6% mostly yes). Annoyances at the dental exam were described as acceptable by participants (61% yes, 23% mostly yes, 6%, mostly no, 10% no). Participants provided very positive qualitative comments about the dentist counseling, the oral exam, and the resulting motivational effect, emphasizing the feeling of oral cleanliness and health that encouraged smoking abstinence. At the end of the intervention (week 8), 17 (44%) participants reported smoking abstinence. After 6 months, 6 (15%, 95% CI 3.5 to 27.2) reported a confirmed continuous smoking abstinence. DISCUSSION: We explored a new multi-disciplinary approach to smoking cessation, which included medical and dental interventions. Despite the small sample size and non-controlled study design, the observed rate was similar to that found in standard medical care. In terms of acceptability and feasibility, our results support further investigations in this field. TRIAL REGISTRATION NUMBER: ISRCTN67470159.

Automated formulation of optimisation models for steel beam structures

Over 70% of the total costs of an end product are consequences of decisions that are made during the design process. A search for optimal cross-sections will often have only a marginal effect on the amount of material used if the geometry of a structure is fixed and if the cross-sectional characteristics of its elements are property designed by conventional methods. In recent years, optimalgeometry has become a central area of research in the automated design of structures. It is generally accepted that no single optimisation algorithm is suitable for all engineering design problems. An appropriate algorithm, therefore, mustbe selected individually for each optimisation situation. Modelling is the mosttime consuming phase in the optimisation of steel and metal structures. In thisresearch, the goal was to develop a method and computer program, which reduces the modelling and optimisation time for structural design. The program needed anoptimisation algorithm that is suitable for various engineering design problems. Because Finite Element modelling is commonly used in the design of steel and metal structures, the interaction between a finite element tool and optimisation tool needed a practical solution. The developed method and computer programs were tested with standard optimisation tests and practical design optimisation cases. Three generations of computer programs are developed. The programs combine anoptimisation problem modelling tool and FE-modelling program using three alternate methdos. The modelling and optimisation was demonstrated in the design of a new boom construction and steel structures of flat and ridge roofs. This thesis demonstrates that the most time consuming modelling time is significantly reduced. Modelling errors are reduced and the results are more reliable. A new selection rule for the evolution algorithm, which eliminates the need for constraint weight factors is tested with optimisation cases of the steel structures that include hundreds of constraints. It is seen that the tested algorithm can be used nearly as a black box without parameter settings and penalty factors of the constraints.

Clinical trial designs for rare diseases: studies developed and discussed by the International Rare Cancers Initiative.

BACKGROUND: The past three decades have seen rapid improvements in the diagnosis and treatment of most cancers and the most important contributor has been research. Progress in rare cancers has been slower, not least because of the challenges of undertaking research. SETTINGS: The International Rare Cancers Initiative (IRCI) is a partnership which aims to stimulate and facilitate the development of international clinical trials for patients with rare cancers. It is focused on interventional--usually randomized--clinical trials with the clear goal of improving outcomes for patients. The key challenges are organisational and methodological. A multi-disciplinary workshop to review the methods used in ICRI portfolio trials was held in Amsterdam in September 2013. Other as-yet unrealised methods were also discussed. RESULTS: The IRCI trials are each presented to exemplify possible approaches to designing credible trials in rare cancers. Researchers may consider these for use in future trials and understand the choices made for each design. INTERPRETATION: Trials can be designed using a wide array of possibilities. There is no 'one size fits all' solution. In order to make progress in the rare diseases, decisions to change practice will have to be based on less direct evidence from clinical trials than in more common diseases.

3D movement and muscle activity patterns in a violin bowing task

Objective: Overuse injuries in violinists are a problem that has been primarily analyzed through the use of questionnaires. Simultaneous 3D motion analysis and EMG to measure muscle activity has been suggested as a quantitative technique to explore this problem by identifying movement patterns and muscular demands which may predispose violinists to overuse injuries. This multi-disciplinary analysis technique has, so far, had limited use in the music world. The purpose of this study was to use it to characterize the demands of a violin bowing task. Subjects: Twelve injury-free violinists volunteered for the study. The subjects were assigned to a novice or expert group based on playing experience, as determined by questionnaire. Design and Settings: Muscle activity and movement patterns were assessed while violinists played five bowing cycles (one bowing cycle = one down-bow + one up-bow) on each string (G, D, A, E), at a pulse of 4 beats per bow and 100 beats per minute. Measurements: An upper extremity model created using coordinate data from markers placed on the right acromion process, lateral epicondyle of the humerus and ulnar styloid was used to determine minimum and maximum joint angles, ranges of motion (ROM) and angular velocities at the shoulder and elbow of the bowing arm. Muscle activity in right anterior deltoid, biceps brachii and triceps brachii was assessed during maximal voluntary contractions (MVC) and during the playing task. Data were analysed for significant differences across the strings and between experience groups. Results: Elbow flexion/extension ROM was similar across strings for both groups. Shoulder flexion/extension ROM increaslarger for the experts. Angular velocity changes mirrored changes in ROM. Deltoid was the most active of the muscles assessed (20% MVC) and displayed a pattern of constant activation to maintain shoulder abduction. Biceps and triceps were less active (4 - 12% MVC) and showed a more periodic 'on and off pattern. Novices' muscle activity was higher in all cases. Experts' muscle activity showed a consistent pattern across strings, whereas the novices were more irregular. The agonist-antagonist roles of biceps and triceps during the bowing motion were clearly defined in the expert group, but not as apparent in the novice group. Conclusions: Bowing movement appears to be controlled by the shoulder rather than the elbow as shoulder ROM changed across strings while elbow ROM remained the same. Shoulder injuries are probably due to repetition as the muscle activity required for the movement is small. Experts require a smaller amount of muscle activity to perform the movement, possibly due to more efficient muscle activation patterns as a result of practice. This quantitative multidisciplinary approach to analysing violinists' movements can contribute to fuller understanding of both playing demands and injury mechanisms .

Projets des logements à la suite des désastres : analyse du système organisationnel et évaluation de la satisfaction des usagers dans un projet de reconstruction dans la région du Maghreb

Plusieurs études ont révélé des problèmes récurrents au niveau de la performance et de la gestion des projets de reconstruction à la suite des catastrophes dans les pays en voie de développement (PEVD). Ces projets doivent faire face à des conditions de vulnérabilité des habitants, engendrées par des facteurs politiques, économiques, sociaux et culturels. Les divers participants - contraints par un accès limité à l’information - sont confrontés à travailler dans un contexte hostile ayant un niveau d’incertitude élevé. Ce niveau d’incertitude augmente les risques du projet de reconstruction, particulièrement le risque d’insatisfaction des usagers. Ce travail vise à mettre en parallèle l’analyse du système organisationnel adopté pour la conduite d’un projet de reconstruction et celle du niveau de satisfaction des usagers. Il émet l’hypothèse suivante: deux facteurs organisationnels influencent largement le niveau de satisfaction de la part des bénéficiaires d’un projet de reconstruction de logements à la suite d’un désastre en PEVD: (i) le niveau de centralisation de la prise de décisions (jumelée au manque d’information) au sein de la Multi-Organisation Temporaire (MOT); et (ii) la capacité de la structure organisationnelle de la MOT d’impliquer la participation active des usagers au niveau de la planification, de la gestion, du financement et du design du projet. Afin d’atteindre cet objectif, une recherche empirique fut menée pour analyser le cas des inondations ayant eu lieu en 2003 dans une ville dans la région du Maghreb. Le niveau de satisfaction des usagers a été déterminé grâce à des indicateurs de transfert de technologie qui se basent sur l’analyse du « Cadre Logique » - une méthode d’évaluation largement utilisée dans le domaine du développement international. Les résultats de la recherche ne visent pas à identifier une relation de cause à effet entre les deux variables étudiées (la structure organisationnelle et la satisfaction des usagers). Cependant, ils mettent en évidence certains principes du montage et de la gestion des projets qui peuvent être mis en place pour l’amélioration des pratiques de reconstruction.

Modèle novateur de conception d’interface humain-ordinateur centrée sur l’utilisateur : le designer en tant que médiateur

Cette recherche porte sur des questions relatives à la conception des interfaces humain-ordinateur. Elle s’inscrit dans le courant des recherches sur l’utilisabilité et elle s’intéresse particulièrement aux approches centrées sur l’utilisateur. Nous avons été très souvent témoin des difficultés éprouvées par les utilisateurs dans l’usage de certaines interfaces interactives et nous considérons que ces difficultés découlent d’un problème de design. Le design d’interface doit être basé sur les besoins de l’utilisateur dans le cadre de ses activités, dont les caractéristiques devaient être bien comprises et bien prises en considération pour mener à la conception d’interfaces qui respectent les critères d’utilisabilité. De plus, la communauté des chercheurs ainsi que l’industrie admettent maintenant que pour améliorer le design, il est crucial de développer les interfaces humain-ordinateur au sein d’une équipe multidisciplinaire. Malgré les avancées significatives dans le domaine du design centrées sur l’utilisateur, les visées annoncées sont rarement réalisées. La problématique étudiée nous a conduit à poser la question suivante : En tant que designer d’une équipe multidisciplinaire de conception, comment modifier la dynamique de collaboration et créer les conditions d’une conception véritablement centrée sur l’interaction humain-ordinateur ? Notre démarche de recherche a été guidée par l’hypothèse voulant que l’activité de design puisse être le moyen de faciliter la création d’un langage commun, des échanges constructifs entre les disciplines, et une réflexion commune centrée sur l’utilisateur. La formulation de cette hypothèse nous a mené à réfléchir sur le rôle du designer. Pour mener cette recherche, nous avons adopté une méthodologie mixte. Dans un premier temps, nous avons utilisé une approche de recherche par projet (recherche-projet) et notre fonction était celle de designer-chercheur. La recherche-projet est particulièrement appropriée pour les recherches en design. Elle privilégie les méthodes qualitatives et interprétatives ; elle étudie la situation dans sa complexité et de façon engagée. Nous avons effectué trois études de cas successives. L’objectif de la première étude était d’observer notre propre rôle et nos interactions avec les autres membres de l’équipe de projet pendant le processus de design. Dans la seconde étude, notre attention a été portée sur les interactions et la collaboration de l’équipe. Nous avons utilisé le processus de design comme méthode pour la construction d’un langage commun entre les intervenants, pour enrichir les réflexions et pour favoriser leur collaboration menant à redéfinir les objectifs du projet. Les limites de ces deux cas nous ont conduit à une intervention différente que nous avons mise en œuvre dans la troisième étude de cas. Cette intervention est constituée par la mise en place d’un atelier intensif de conception où les intervenants au projet se sont engagés à développer une attitude interdisciplinaire permettant la copratique réflexive pour atteindre les objectifs d’un projet de construction d’un site web complexe centré sur l’utilisateur. L’analyse et l’interprétation des données collectées de ces trois études de cas nous ont conduit à créer un modèle théorique de conception d’interface humain-ordinateur. Ce modèle qui informe et structure le processus de design impliquant une équipe multidisciplinaire a pour objectif d’améliorer l’approche centrée sur l’utilisateur. Dans le cadre de ce modèle, le designer endosse le rôle de médiateur en assurant l’efficacité de la collaboration de l’équipe. Dans un deuxième temps, afin de valider le modèle et éventuellement le perfectionner, nous avons utilisé une approche ethnographique comportant des entrevues avec trois experts dans le domaine. Les données des entrevues confirment la validité du modèle ainsi que son potentiel de transférabilité à d’autres contextes. L’application de ce modèle de conception permet d’obtenir des résultats plus performants, plus durables, et dans un délai plus court.

Heuristiques efficaces pour l'optimisation de la performance des systèmes séries-parallèles

Thèse numérisée par la Division de la gestion de documents et des archives de l'Université de Montréal

Corporate governance: quo vadis?

Purpose – This paper aims to examine current research trends into corporate governance and to propose a different dynamic, humanistic approach based on individual purpose, values and psychology. Design/methodology/approach – The paper reviews selected literature to analyse the assumptions behind research into corporate governance and uses a multi-disciplinary body of literature to present a different theoretical approach based at the level of the individual rather than the organisation. Findings – The paper shows how the current recommendations of the corporate governance research models could backfire and lead to individual actions that are destructive when implemented in practice. This claim is based on identifying the hidden assumptions behind the principal-agent model in corporate governance, such as the Hobbesian view and the Homo Economicus approach. It argues against the axiomatic view that shareholders are the owners of the company, and it questions the way in which managers are assessed based either on the corporate share price (the shareholder view) or on a confusing set of measures which include more stakeholders (the stakeholder view), and shows how such a yardstick can be demotivating and put the corporation in danger. The paper proposes a humanistic, psychological approach that uses the individual manager as a unit of analysis instead of the corporation and illustrates how such an approach can help to build better governance. Research limitations/implications – The paper's limited scope can only outline a conceptual framework, but does not enter into detailed operationalisation. Practical implications – The paper illustrates the challenges in applying the proposed framework into practice. Originality/value – The paper calls for the use of an alternative unit of analysis, the manager, and for a dynamic and humanistic approach which encompasses the entirety of a person's cognition, including emotional and spiritual values, and which is as of yet usually not to be found in the corporate governance literature.

Morte como desafio afetivo para o profissional da saúde: ansiedade e sentimentos de quem lida com o paciente terminal com câncer

It is a Cross-sectional and multi-disciplinary study whose population selection was made by department of human resources (composed by a Manager, an Oncologist and a Psychologist) from the hospital where this research was realized. They also collaborated with important information about the work of that professionals in the hospital. We also counted on a Statistic who made study design calculating the sample and analyzing data. This research issued Evaluating health professionals anxiety levels who care for cancer terminally ill and their feelings about that work as well as identifying the factors which have influence on it. 100 health professionals from the Hospital which is a reference on cancer caring in Brazil situated in the city of Natal, state of Rio Grande do Norte, participated of this research. There was a sample loss of 21%. Data were collected through a questionnaire and State-Trait Anxiety Inventory (STAI). Results showed that 15% of the professionals have low State Anxiety levels, 70% Medium State Anxiety levels and 15% high State anxiety levels. The Number of Patients and Working in another Institution have interfered in the anxiety levels. Doctors and Nursing Assistants and Technicians have got the highest high State Anxiety percentage (25%). 73% of them declare to feel some sort of different behavior and/or feelings in caring for terminally ill. The most remarkable professionals feelings were Suffering and Sadness, and Terminally ill Children was the most difficult age group to care for. We conclude that work overload and having more than one job can interfere in professional stress levels and anxiety. Dealing with terminally ill, specially children one, can cause on the professionals psychological suffering. It s recommended the development of supporting and training strategies to reduce and/or to prevent Stress and Anxiety high levels