Corrosion kinetics and topography analysis of Ti-6Al-4V alloy subjected to different mouthwash solutions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação comparativa in vivo da eficácia do óleo de melaleuca, clorexidina e listerine sobre streptococcus mutans e microrganismos totais na saliva

Objective: To compare the efficacy of the mouthwashes 0.12% chlorhexidine, Listerine, and 0.5% and 2% Melaleuca Alternifolia oil against the salivary levels of Streptococcus mutans and total microorganisms. Methods: This study was double-blind controlled and paired clinical assay. Twenty-six volunteers aged 21 to 35 years old were enrolled. At baseline, 1 mL of unstimulated saliva was collected from each subject, 1 and 15 min after mouthrinsing with the following solutions: sterile distilled water, 0.12% chlorhexidine digluconate, Listerine (©Johnson & Johnson do Brasil), 0.5% and 2% concentrations of Melaleuca Alternifolia (Sigma-Aldrich). The volunteers used all the evaluated mouthrinses with a 15-day interval between the solutions. Immediately after rinsing, saliva was collected and serial dilutions were performed, followed by plating in blood agar culture medium for growth of total microorganisms and SB-20 (Sucrose-Bacitracin agar) for growth of S. mutans, and incubation at 37 °C for 48 h in microaerophilia. After incubation, the number of colonies was counted and expressed as colony forming units (UFC/mL). Results: Chlorhexidine showed antimicrobial action by reducing total microorganisms and S. mutans, while the action of 0.5% Melaleuca Alternifolia was similar to that of distilled water. Listerine and 2% Melaleuca Alternifolia oil reduced total microbial counts by 11% and 9% respectively, and S. mutans by 20% and 11%. Conclusion: A single rinse with 0.12% chlorhexidine is effective in reducing the levels of total microorganisms and S. mutans present in saliva. Under the same testing conditions, Listerine and 0.5% and 2% Melaleuca Alternifolia oil presented lower efficacy than chlorhexidine.

Atividade antimicrobiana de enxaguatórios bucais sem álcool à base de clorexidina sobre candida albicans

The aim of this study was to evaluate the antimicrobial activity of alcohol-free mouthwashes on Candida albicans. Twenty clinical isolates of C. albicans and one reference strain (ATCC 18804) were evaluated after exposure to two 0.12% chlorhexidine-based and alcohol-free (“Ca” and “Or”) in comparison to gluconate chlorhexidine with ethanol (positive control). The maximum inhibitory dilution (MID) and maximum fugal dilution (MFD) were determined by the microdilution method. Twelve serial dilutions (from 50 to 0.02%) were prepared in duplicate. Then, 100 µL of C. albicans suspension (106 cells.mL–1) were added to the wells. After incubation (37 °C/24 hours), MID was determined by reading the optical density. For MFD determination, the content of the wells were plated on Saouraud agar. For MID, there were no differences between groups Or and control, but Ca group showed a MID statistically higher (Kruskal-Wallis, p = 0.0012). For MFD, there were no differences between Ca and control (Mann-Whitney test, p = 0.1631). It can be concluded that Ca group showed a fungicid activity against C. albicans similar to the control, but lower fungistatic activity when compared to the control. Group Or showed only a fungistatic action similar to control.

Effect of different solutions on color stability of acrylic resin-based dentures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Manutenção em próteses implantossuportadas: peri-implantite

The identification and treatment of peri-implant infections are an essential stage in the maintenance of dental implants, reflecting the longevity of rehabilitation. Therefore, the aim of the study was to conduct a literature review addressing peri-implantitis in dental implants in order to guide planning for the longevity of oral rehabilitation. It was conducted a detailed search strategy by the PubMed / Medline Dentistry and Oral Science, it was used as descriptors: “peri-implantitis” and “Dental Implant”, until July 2013. From 566 articles, after a review, according to the inclusion criteria, 34 articles were selected. The results were grouped together in topics (concept, etiology, diagnosis, surgical and nonsurgical, and aspects of oral rehabilitation) for further discussion and conclusions. Conclusions: The accumulation of plaque has been associated with a higher propensity to peri-implantitis. There is a higher incidence of the peri-implantitis disease among patients with previous history of periodontal disease. The local administration of antibiotics and association with mouthwashes / topical use are indicated as suitable for the treatment of moderate peri-implantitis.

Effect of different solutions on knoop hardness of indirect composite

Introduction: Indirect dental composites may have adequate clinical performance. However, the literature is scarce regarding indirect composite resins and these solutions should be considered to maintain their properties. The aim of the study was to evaluate the influence of beverages, mouthwashes and bleaching agents on the hardness of indirect composite resins. Methods: Five different brands of indirect composite resins were evaluated: Adoro, Resilab, Cristobal, Sinfony and Epricord. Ten specimens of each brand were immersed in eleven different solutions: four mouthwashes (Listerine, Oral-B, Plax, Periogard), four beverages (coke soft drink, red wine, coffee, orange juice), three dental bleaching agents (16% peroxide of carbamide, 7.5% and 38% peroxide of hydrogen) and artificial saliva (control group). The Knoop hardness was measured before (baseline) and after 12, 24, 36 and 60 hours of immersion in mouthwashes; after 7, 14 and 21 days of immersion in beverages and after 7 and 14 days of immersion in dental bleaching agents. The results were analyzed using 3-way repeated measures ANOVA and Tukey’s test (p<0.05). Results: All resins presented significant decrease on hardness values after immersion process whereas this reduction was higher for Resilab and Sinfony. The latter exhibited the lowest initial values of hardness while Cristobol resin presented the highest hardness values. The mouthwashes promoted a significant decrease in the hardness of specimens.

Atividade anti-inflamatória e citotoxicidade dos extratos glicólicos de Cynara cardunculus var. scolymus (L.) Fiori (alcachofra), Myracrodruon urundeuva Allemão (aroeira-do-sertão) e Camellia sinensis (L.) Kuntze (chá verde)

Pós-graduação em Biopatologia Bucal - ICT

Chemical and morphological features of nanofilled composite resin: Influence of finishing and polishing procedures and fluoride solutions

This study evaluated the influence of finishing and polishing procedures and different fluoride solutions on superficial morphology and chemistry of the nanofilled composite resin Supreme XT (3M) through the EDX analysis and SEM evaluation. Circular specimens (n = 30) of 10 mm diameter and 2 mm thickness were prepared, with half of the sample assays finished and polished with Super-Snap (R) sandpaper. The experimental groups were divided according to the presence or absence of finishing and polishing and solutions (artificial saliva, 0.05% of manipulated sodium fluoride solution, Fluordent Reach, Oral B, Fluorgard). Specimens were immersed in each respective solution for 1 min per day, during 60 days and stored in artificial saliva at 37 +/- 1 degrees C between immersion periods. Topography and chemical analysis was qualitative. It was observed that specimens submitted to finishing and polishing procedures had lower superficial degradation. Fluoride solutions promoted superficial alterations on specimens, being the highest degradation obtained with Fluordent Reach. It can be concluded that finishing and polishing procedures and the immersion media influence the superficial morphology of composite resin tested; the Fluordent Reach was the fluoride solution that most affected the material's surface. Microsc. Res. Tech. 2011., (c) 2011 Wiley Periodicals, Inc.

The influence of mouthrinses and simulated toothbrushing on the surface roughness of a nanofilled composite resin

The aim of this study was to determine the influence of mouthrinses on the surface roughness of a nanofilled composite resin after toothbrushing. One hundred nanofilled composite resin specimens were prepared and randomly distributed into two groups-brushed and non-brushed-and then assigned to five subgroups, according to the mouthrinse solutions (n = 10): Colgate Plax Fresh Mint, Oral B, Cepacol, Colgate Plax, and artificial saliva. Each sample was immersed in 20 mL of the mouthrinses for 1 minute, 5 days per week, twice a day, for a 3-week period. The control group used in the study was one in which the specimens were not subjected to brushing and remained only in artificial saliva. Toothbrushing was performed once a week for 1 minute, for 3 weeks. Surface roughness measurements (Ra) were performed after the immersion period and toothbrushing, by means of a profilometer. Data were analyzed by two-way ANOVA and Tukey's test. Analysis revealed that the association between toothbrushing and Colgate Plax Fresh Mint produced the lowest surface roughness (p < 0.05). All other groups tested (Oral B, Cepacol, Colgate Plax, artificial saliva) exhibited no statistically significant differences between surfaces, whether subjected to toothbrushing or not (p < 0.05). It was concluded that the surface roughness of the nanofilled composite resin tested can be influenced by the mouthrinse associated with toothbrushing.

O papel do flúor como agente corrosivo dos fios ortodônticos

O tratamento ortodôntico insere-se numa área da medicina dentária que se dedica ao estudo das formas de prevenir, interceptar e corrigir as más posições dos dentes e dos maxilares. Durante este tratamento é importante que os pacientes consigam manter uma boa higiene oral dos dentes e do aparelho, o que requer precisão e tempo. Para ajudar a manter a higiene oral os pacientes recorrem frequentemente ao uso de produtos fluoretados, que apesar dos seus benefícios como agentes na prevenção da cárie têm consequências no tratamento ortodôntico nomeadamente na corrosão dos fios ortodônticos. Através de uma revisão da literatura pretende-se explorar a relação entre o uso de flúor durante o tratamento ortodôntico com a corrosão dos fios mais usados nesse mesmo tratamento. Materiais e Métodos: Nesta revisão de literatura realizou-se pesquisa nas bases de dados electrónicas “Medline/PubMed”, e “B-On”; referências bibliográficas de artigos; livros de Medicina Dentária e pesquisa narrativa. Conclusão: O uso de agentes fluoretados tópicos pode induzir uma diminuição das propriedades mecânicas dos fios ortodônticos nomeadamente do níquel-titânio, e consequentemente provocar o prolongamento do tratamento ortodôntico. Os Ortodontistas devem ter em consideração o tipo de fio usado no tratamento no momento da prescrição de colutórios e outros agentes fluoretados.