The New Zealand Tunnelling Company, 1915-1919.

Mode of access: Internet.

Evaluation of mechanized consolidation of bridge deck concrete in Illinois /

"August 17, 1999."

Non-ideal monitoring of a qubit state using a quantum tunnelling device

We propose a model for non-ideal monitoring of the state of a coupled quantum dot qubit by a quantum tunnelling device. The non-ideality is modelled using an equivalent measurement circuit. This allows realistically available measurement results to be related to the state of the quantum system (qubit). We present a quantum trajectory that describes the stochastic evolution of the qubit state conditioned by tunnelling events (i.e. current) through the device. We calculate and compare the noise power spectra of the current in an ideal and a non-ideal measurement. The results show that when the two qubit dots are strongly coupled the non-ideal measurement cannot detect the qubit state precisely. The limitation of the ideal model for describing a realistic system maybe estimated from the noise spectra.

Decompression illness and its regulation in contemporary UK tunnelling : an engineering perspective:an engineering perspective

This thesis records the findings of a retrospective study of decompression illness (DCI) in the UK compressed air tunnelling industry since the mid-1980s. The thesis describes how the study arose, its scope and objectives, along with an overview of tunnelling and shaft-sinking. The development of compressed air working techniques is reviewed along with a description of decompression practice and DCI, and an outline of relevant legislation and guidance. The acquisition and manipulation of data to form a number of databases and spreadsheets on which the analysis was performed is discussed. That analysis examined measures of DCI incidence and quantified that incidence using these measures. Also considered is the variation in tolerance and susceptibility to DCI in the workforce, and the phenomenon of acclimatisation. An examination of the extent to which men worked on multiple contracts and the variation in their susceptibility to DCI on these contracts is included. Options are then considered for reducing the incidence of DCI. The first retained air-only decompression through the application of restrictions on exposure. The second related to the use of oxygen decompression. Finally the adequacy of the existing Regulations and Guidance is considered and recommendations made for possible changes to them, arising from the study. The main conclusions are that a number of measures of DCI incidence were identified, some more appropriate than others and that the incidence of DCI when so measured was high, disproportionately so in shift workers. No reasonably practicable restrictions on exposure were identified which would have allowed the retention of air-only decompression. Oxygen decompression looked promising but had yet to be used sufficiently extensively to generate enough data for analysis. Recommendations included one that an alternative technique for monitoring the effectiveness of decompression should be developed. The thesis ends with recommendations for further research.

'Family' ownership, tunnelling and earnings management:a review of the literature

In this review paper, we bring together a number of aspects of family firms that are ubiquitous in a number of institutional contexts, often as part of larger business groups. We pay particular attention to the mechanisms by which families retain control over firms, and the incentives of the families in control to expropriate other stakeholders by way of tunnelling. We examine the role of earnings management in facilitating tunnelling, and evidence about the incidence of earnings management in family firms. Our review suggests that while the literature on these aspects of family control is rich, the contexts in which the empirical exercises are undertaken are relatively few, and hence there is considerable opportunity to expand it to other contexts, in particular in the form of cross-country comparisons of the relative impact of agency conflicts and institutions on these issues.

Tunnelling density of states at Coulomb-blockade peaks

We calculate the tunnelling density of states (TDoS) for a quantum dot in the Coulomb-blockade regime, using a functional integral representation with allowing correctly for the charge quantisation. We show that in addition to the well-known gap in the TDoS in the Coulomb-blockade valleys, there is a suppression of the TDoS at the peaks. We show that such a suppression is necessary in order to get the correct result for the peak of the differential conductance through an almost close quantum dot.

Time-dependency of Rocks and Implications Associated with Tunnelling

The formulation of a geotechnical model and the associated prediction of the mechanical behaviour is a challenge engineers need to overcome in order to optimize tunnel design and meet project requirements. Special challenges arise in cases where rocks and rockmasses are susceptible to time-effects and time-dependent processes govern. Progressive rockmass deformation and instability, time-dependent overloading of support and delayed failures are commonly the result of time-dependent phenomena. The research work presented in this thesis serves as an attempt to provide more insight into the time-dependent behaviour of rocks. Emphasis is given on investigating and analyzing creep deformation and time-dependent stress relaxation phenomenon at the laboratory scale and in-depth analyses are presented. This thesis further develops the understanding of these phenomena and practical yet scientific tools for estimating and predicting the long-term strength and the maximum stress relaxation of rock materials are proposed. The identification of the existence of three distinct behavioural stages during stress relaxation is presented and discussed. The main observations associated with time-dependent behaviour are employed in numerical analyses and applied at the tunnel scale. A new approach for simulating and capturing the time-dependent behaviour coupled with the tunnel advancement effect is also developed and analyzed. Guidance is provided to increase the understanding of the support-rockmass interaction and the main implications and significance of time-dependent behaviour associated with rock tunnelling are discussed. The work presented in this thesis advances the scientific understanding of time-dependent rock and rockmass behaviour, increases the awareness of how such phenomena are captured numerically, and lays out a framework for dealing with such deformations when predicting tunnel deformations. Practical aspects of this thesis are also presented, which will increase their usage in the associated industries and close the gap between the scientific and industry communities.

High performance terahertz resonant tunnelling diode sources and broadband antenna for air-side radiation

Resonant tunnelling diode (RTD) is known to be the fastest electronics device that can be fabricated in compact form and operate at room temperature with potential oscillation frequency up to 2.5 THz. The RTD device consists of a narrow band gap quantum well layer sandwiched between two thin wide band gap barriers layers. It exhibits negative differential resistance (NDR) region in its current-voltage (I-V) characteristics which is utilised in making oscillators. Up to date, the main challenge is producing high output power at high frequencies in particular. Although oscillation frequencies of ~ 2 THz have been already reported, the output power is in the range of micro-Watts. This thesis describes the systematic work on the design, fabrication, and characterisation of RTD-based oscillators in microwave/millimetre-wave monolithic integrated circuits (MMIC) form that can produce high output power and high oscillation frequency at the same time. Different MMIC RTD oscillator topologies were designed, fabricated, and characterised in this project which include: single RTD oscillator which employs one RTD device, double RTDs oscillator which employs two RTD devices connected in parallel, and coupled RTD oscillators which combine the powers of two oscillators over a single load, based on mutual coupling and which can employ up to four RTD devices. All oscillators employed relatively large size RTD devices for high power operation. The main challenge was to realise high oscillation frequency (~ 300 GHz) in MMIC form with the employed large sized RTD devices. To achieve this aim, proper designs of passive structures that can provide small values of resonating inductances were essential. These resonating inductance structures included shorted coplanar wave guide (CPW) and shorted microstrip transmission lines of low characteristics impedances Zo. Shorted transmission line of lower Zo has lower inductance per unit length. Thus, the geometrical dimensions would be relatively large and facilitate fabrication by low cost photolithography. A series of oscillators with oscillation frequencies in the J-band (220 – 325 GHz) range and output powers from 0.2 – 1.1 mW have been achieved in this project, and all were fabricated using photolithography. Theoretical estimation showed that higher oscillation frequencies (> 1 THz) can be achieved with the proposed MMIC RTD oscillators design in this project using photolithography with expected high power operation. Besides MMIC RTD oscillators, reported planar antennas for RTD-based oscillators were critically reviewed and the main challenges in designing high performance integrated antennas on large dielectric constant substrates are discussed in this thesis. A novel antenna was designed, simulated, fabricated, and characterised in this project. It was a bow-tie antenna with a tuning stub that has very wide bandwidth across the J-band. The antenna was diced and mounted on a reflector ground plane to alleviate the effect of the large dielectric constant substrate (InP) and radiates upwards to the air-side direction. The antenna was also investigated for integration with the all types of oscillators realised in this project. One port and two port antennas were designed, simulated, fabricated, and characterised and showed the suitability of integration with the single/double oscillator layout and the coupled oscillator layout, respectively.

Effect Of Particles Of Ashes Produced From Sugarcane Burning On The Respiratory System Of Rats.

The practice of burning sugarcane obtained by non-mechanized harvesting exposes workers and the people of neighboring towns to high concentrations of particulate matter (PM) that is harmful to health, and may trigger a series of cardiorespiratory diseases. The aim of this study was to analyze the chemical composition of the micro-particles coming from sugarcane burning residues and to verify the effects of this micro-particulate matter on lung and tracheal tissues. Micro-particulate matter (PM10) was obtained by dissolving filter paper containing burnt residues in NaCl solution. This material was instilled into the Wistar rats' nostrils. Histological analyses (hematoxylin and eosin - HE) of cardiac, lung and tracheal tissues were performed. Inflammatory mediators were measured in lung tissues by using ELISA. The chemical composition of the particulate material revealed a large quantity of the phthalic acid ester, high concentrations of phenolic compounds, anthracene and polycyclic aromatic hydrocarbons (PAH). Histological analysis showed a reduction in subjacent conjunctive tissue in the trachea, lung inflammation with inflammatory infiltrate formation and reduction of alveolar spaces and a significant increase (p<0.05) in the release of IL-1α, IL-1β, IL-6, and INF-γ in the group treated with PM10 when compared to the control group. We concluded that the burning sugarcane residues release many particles, which have toxic chemical compounds. The micro-particulate matter can induce alterations in the respiratory system.

Interplay Of Weak Interactions In The Atom-by-atom Condensation Of Xenon Within Quantum Boxes.

Condensation processes are of key importance in nature and play a fundamental role in chemistry and physics. Owing to size effects at the nanoscale, it is conceptually desired to experimentally probe the dependence of condensate structure on the number of constituents one by one. Here we present an approach to study a condensation process atom-by-atom with the scanning tunnelling microscope, which provides a direct real-space access with atomic precision to the aggregates formed in atomically defined 'quantum boxes'. Our analysis reveals the subtle interplay of competing directional and nondirectional interactions in the emergence of structure and provides unprecedented input for the structural comparison with quantum mechanical models. This approach focuses on-but is not limited to-the model case of xenon condensation and goes significantly beyond the well-established statistical size analysis of clusters in atomic or molecular beams by mass spectrometry.

Associação entre prática de atividade física, escolaridade e perfil alimentar de motoristas de caminhão

A demanda da sociedade moderna intensificou o trabalho ininterrupto em diversas profissões. Além disso, o modo de organização da sociedade, com atividades predominantemente mecanizadas, tem contribuído para a prevalência de hábitos de vida não saudáveis, como a inatividade física. Este estudo objetiva verificar se fatores ocupacionais, sociodemográficos, antropométricos e alimentares estão associados à prática de atividade física insuficiente e se há diferenças nessa associação entre motoristas de caminhão que trabalham de dia ou à noite. Participaram da pesquisa 470 motoristas de caminhão, que responderam a questionários de dados sociodemográficos, atividade física e frequência alimentar. Foi realizada uma regressão logística univariada para verificar a associação entre atividade física insuficiente e as demais variáveis. Além disso, a regressão logística múltipla foi testada para obter modelos que mostrem a associação de conjuntos de variáveis relacionados à atividade física insuficiente. Os resultados indicaram que a prática de atividade física está associada ao maior nível de escolaridade (OR = 1,84; IC = 1,22-2,76) e menor consumo de bebidas alcoólicas (OR = 1,59; IC = 1,04-2,45). Maior ingestão de cereais integrais (OR = 1,63; IC = 1,08-2,46) foi associada à prática regular de atividade física. Entre os trabalhadores noturnos, foi encontrada associação entre a prática regular de atividade física, maior consumo de cereais integrais (OR = 2,02; IC =1,13-3,60) e menor consumo de carboidratos simples (OR = 1,91; IC = 1,08-3,37).

Extensão máxima de retalho pediculado de omento maior através de túnel subcutâneo para ossos longos em cães

Há tempo sabe-se que o omento humano pode promover atividade angiogênica em estruturas adjacentes nas quais ele é aplicado. Na medicina veterinária, são poucas as pesquisas com retalho pediculado de omento maior como indutor angiogênico e imunogênico, porém suas propriedades de adesão e drenagem são bem conhecidas. Os objetivos deste estudo foram criar um retalho pediculado de omento maior, mensurar seu comprimento durante as etapas de criação e avaliar a possibilidade de alcance para ossos longos (fêmur, tíbia, úmero, rádio e ulna) através de túnel subcutâneo, visando a utilizá-lo futuramente como indutor angiogênico em focos de fratura, para aceleração da osteogênese e controle de infecções ósseas. Foram utilizados 30 cadáveres frescos de cães de todas as raças, com exceção dos condrodistróficos. Os resultados foram conclusivos e confirmaram a possibilidade de alcance do retalho de omento para ossos longos de cadáveres de cães em que todos os retalhos alcançaram a metáfise distal dos ossos avaliados. A média de comprimento do omento, em camada dupla, dos 30 animais avaliados foi de 30,87cm; da camada simples foi de 54,37cm e do retalho em L foi de 92,7cm. Com a extensão máxima do omento, foi possível alcançar as metáfises distais de todos os ossos propostos, com comprimento médio excedente de 29,87cm para fêmur, 20,73cm para tíbia/fíbula, 25,13cm para úmero e 16,27cm para rádio/ulna. As variáveis peso e retalho em L avaliadas estatisticamente de cada indivíduo apresentaram correlação positiva moderada. Concluiu-se que, em cadáveres de cães, é possível levar o retalho pediculado de omento maior através de túnel subcutâneo para metáfise distal de ossos longos e que, quanto maior o peso do animal, maior o comprimento do retalho em L.

Genotoxic potential generated by biomass burning in the Brazilian Legal Amazon by Tradescantia micronucleus bioassay: a toxicity assessment study

Background: The Brazilian Amazon has suffered impacts from non-sustainable economic development, especially owing to the expansion of agricultural commodities into forest areas. The Tangara da Serra region, located in the southern of the Legal Amazon, is characterized by non-mechanized sugar cane production. In addition, it lies on the dispersion path of the pollution plume generated by biomass burning. The aim of this study was to assess the genotoxic potential of the atmosphere in the Tangara da Serra region, using Tradescantia pallida as in situ bioindicator. Methods: The study was conducted during the dry and rainy seasons, where the plants were exposed to two types of exposure, active and passive. Results: The results showed that in all the sampling seasons, irrespective of exposure type, there was an increase in micronucleus frequency, compared to control and that it was statistically significant in the dry season. A strong and significant relationship was also observed between the increase in micronucleus incidence and the rise in fine particulate matter, and hospital morbidity from respiratory diseases in children. Conclusions: Based on the results, we demonstrated that pollutants generated by biomass burning in the Brazilian Amazon can induce genetic damage in test plants that was more prominent during dry season, and correlated with the level of particulates and elevated respiratory morbidity.