Magnetic properties of ODP Hole 116-717C

Dark gray and black mud turbidites cored on ODP Leg 116 commonly yielded large magnetic susceptibility peaks. What is more, these peaks displayed different shapes suggesting variations in sedimentological processes. Consequently, a detailed study of the magnetic properties of two of these turbidites was undertaken to better understand the source of their unusual magnetism. Physical properties were measured as was the demagnetization behavior of sample natural remanent magnetizations (NRMs). Subsequently, an anhysteretic remanent magnetization (ARM) and saturation isothermal remanent magnetization (SIRM) were imparted to the samples, demagnetized, and various grain size tests based on the behavior of these remanences were applied. Finally, magnetic concentrates from two samples were examined with a scanning electron microscope with the capability to do energy dispersive X-ray (EDX) analysis. The turbidites stand out from surrounding layers because of their high susceptibilities, NRMs, ARMs, SIRMs, and ratios of ARM and SIRM to susceptibility. Their alternating field and thermal demagnetization properties and IRM acquisition curves are consistent with titanomagnetite grains as the primary magnetic mineral with some amount of hematite present. These properties are very similar to those published for samples from the Deccan flood basalts and suggest this formation as a possible source of the magnetic grains. Magnetic granulometry tests implied that the magnetic particles behave dominantly as single-domain and pseudo-single-domain grains. Moreover, they also implied that the large variation in susceptibility observed in the black mud turbidites results from a tenfold increase in the concentration of titanomagnetite grains. Electron microscope, EDX, and SIRM analyses revealed detrital titanomagnetites with typical sizes around 8-10 µm, but as large as 20-25 µm. These are probably the dominant magnetic grains in the black mud turbidites; however, ARM and susceptibility frequency-dependence suggested that there may also be a submicrometer fraction present. Most of the observed titanomagnetite grains are tabular and some display exsolution lamellae, accounting for the pseudo-single-domain behavior despite their moderate sizes. We hypothesize that the magnetic mineral concentration variations are brought about by sedimentological factors. The heavier magnetic minerals may tend to sink to the bottom of a turbidite; however, sometimes turbidite turbulence may act to keep these tabular, medium-size grains in suspension longer than some other larger or more equidimensional grains. Consequently, the susceptibility peak shape may reflect the turbidite current velocities as well as other sedimentological factors.

X-ray fluorescence scanning of discrete samples on the Schwalbenberg II loess-paleosol sequence, raw data, magnetic susceptibility, organic carbon and U-ratio as grainsize index

The Schwalbenberg II loess-paleosol sequence (LPS) denotes a key site for Marine Isotope Stage (MIS 3) in Western Europe owing to eight succeeding cambisols, which primarily constitute the Ahrgau Subformation. Therefore, this LPS qualifies as a test candidate for the potential of temporal high-resolution geochemical data obtained X-ray fluorescence (XRF) scanning of discrete samplesproviding a fast and non-destructive tool for determining the element composition. The geochemical data is first contextualized to existing proxy data such as magnetic susceptibility (MS) and organic carbon (Corg) and then aggregated to element log ratios characteristic for weathering intensity [LOG (Ca/Sr), LOG (Rb/Sr), LOG (Ba/Sr), LOG (Rb/K)] and dust provenance [LOG (Ti/Zr), LOG (Ti/Al), LOG (Si/Al)]. Generally, an interpretation of rock magnetic particles is challenged in western Europe, where not only magnetic enhancement but also depletion plays a role. Our data indicates leaching and top-soil erosion induced MS depletion at the Schwalbenberg II LPS. Besides weathering, LOG (Ca/Sr) is susceptible for secondary calcification. Thus, also LOG (Rb/Sr) and LOG (Ba/Sr) are shown to be influenced by calcification dynamics. Consequently, LOG (Rb/K) seems to be the most suitable weathering index identifying the Sinzig Soils S1 and S2 as the most pronounced paleosols for this site. Sinzig Soil S3 is enclosed by gelic gleysols and in contrast to S1 and S2 only initially weathered pointing to colder climate conditions. Also the Remagen Soils are characterized by subtle to moderate positive excursions in the weathering indices. Comparing the Schwalbenberg II LPS with the nearby Eifel Lake Sediment Archive (ELSA) and other more distant German, Austrian and Czech LPS while discussing time and climate as limiting factors for pedogenesis, we suggest that the lithologically determined paleosols are in-situ soil formations. The provenance indices document a Zr-enrichment at the transition from the Ahrgau to the Hesbaye Subformation. This is explained by a conceptual model incorporating multiple sediment recycling and sorting effects in eolian and fluvial domains.

Anisotropy-magnetic susceptibility from the Krems Wachtberg archaeological Site (Austria) and high temperature susceptibility

The loess sediment embedding the main Gravettian layer at the Krems-Wachtberg archaeological site facilitates exceptional preservation. To gain insight in the sedimentation process before and after the Paleolithic settlement, the magnetic fabric (preferential orientation of magnetic particles) of loess of the Krems-Wachtberg site is investigated. Magnetic fabric properties clearly show an eolian origin of the loess, but may indicate some relocation in the meter above the cultural layer. The magnetic fabric properties can be divided into three intervals, the top interval shows lowest foliation and inconsistent magnetic fabric directions. The middle interval around the main cultural layer shows low foliation, but a clear preferential NW - SE direction of the lineation. This lineation is interpreted as preferential direction of the eolian loess accumulation from the South-East. The interval below ca. 0.5 m underneath the main find horizon shows a northeast-southwest lineation, but an imbrication suggesting that sediment accumulation occurred perpendicular to this direction, similar to the interval around the find horizon.

Calcium carbonate content and anisotropy of magnetic susceptibility of ODP Leg 172 sites

Sediments from Sites 1057 and 1061 of Ocean Drilling Program Leg 172 on the Blake Outer Ridge exhibit nearly isotropic magnetic susceptibility. Resolving the degree of anisotropy of magnetic susceptibility proved difficult in many samples because of the generally weak magnetic susceptibility of the sediments relative to the noise level of the susceptibility meters used. Lineation varies from 1.0 to 1.013 and foliation varies from 1.0 to 1.08 in the samples that pass rejection criteria. In general the foliation is better resolved than the lineation, particularly at Site 1061, where the foliation exhibits long-term trends that mimic the mean susceptibility. The changes in the foliation at this site are likely the result of changes in the magnetic mineralogy of the sediment. The poorly developed or absent magnetic fabric in the sediments overall can be attributed to high carbonate concentrations and to a circulation regime that was diffuse or with currents too weak to effectively align magnetic particles.

Magnetic extracts of three gravity cores located at the Ceará Rise, the Mid-Atlantic Ridge and the Sierra Leone Rise

The magnetic microparticle and nanoparticle inventories of marine sediments from equatorial Atlantic sites were investigated by scanning and transmission electron microscopy to classify all present detrital and authigenic magnetic mineral species and to investigate their regional distribution, origin, transport, and preservation. This information is used to establish source-to-sink relations and to constrain environmental magnetic proxy interpretations for this area. Magnetic extracts were prepared from sediments of three supralysoclinal open ocean gravity cores located at the Ceará Rise (GeoB 1523-1; 3°49.9'N/41°37.3'W), the Mid-Atlantic Ridge (GeoB 4313-2; 4°02.8'N/33°26.3'W), and the Sierra Leone Rise (GeoB 2910-1; 4°50.7'N/21°03.2'W). Sediments from two depths corresponding to marine isotope stages 4 and 5.5 were processed. This selection represents glacial and interglacial conditions of sedimentation for the western, central, and eastern equatorial Atlantic and avoids interferences from subsurface and anoxic processes. Crystallographic, elemental, morphological, and granulometric data of more than 2000 magnetic particles were collected by scanning and transmission electron microscopy. On basis of these properties, nine particle classes could be defined: detrital magnetite, titanomagnetite (fragmental and euhedral), titanomagnetite-hemoilmentite intergrowths, silicates with magnetic inclusions, microcrystalline hematite, magnetite spherules, bacterial magnetite, goethite needles, and nanoparticle clusters. Each class can be associated with fluvial, eolian, subaeric, and submarine volcanic, biogenic, or chemogenic sources. Large-scale sedimentation patterns are delineated as well: detrital magnetite is typical of Amazon discharge, fragmental titanomagnetite is a submarine weathering product of mid-ocean ridge basalts, and titanomagnetite-hemoilmenite intergrowths are common magnetic particles in West African dust. This clear regionalization underlines that magnetic petrology is an excellent indicator of source-to-sink relations. Hematite encrustations, magnetic spherules, and nanoparticle clusters were found at all investigated sites, while bacterial magnetite and authigenic hematite were only detected at the more oxic western site. At the eastern site, surface pits and crevices were seen on the crystal faces indicating subtle early diagenetic reductive dissolution. It was observed that paleoclimatic signatures of magnetogranulometric parameters such as the ratio of anhysteretic and isothermal remanent magnetizations can be formed either by mixing of multiple sources with separate, relatively narrow grain size ranges (western site) or by variable sorting of a single source with a broad grain size distribution (eastern site). Hematite, goethite, and possibly ferrihydrite nanoparticles occur in all sediment cores studied and have either high-coercive or superparamagnetic properties depending on their partly ultrafine grain sizes. These two magnetic fractions are generally discussed as separate fractions, but we suggest that they could actually be genetically linked.

Magnetic and petrographic properties of ODP Site 120-747 (Table 1)

Carbonate sediments from the Kerguelen Plateau (ODP Leg 120) of Eocene to Pliocene age were investigated with rock magnetic, petrographic and geochemical methods to determine the carriers of remanent magnetization. Magnetic methods showed that the major magnetic minerals were titanomagnetites slightly larger than single domain particles. Submicrometre to micrometre-size grains of titanomagnetite were identified as inclusions in volcanic glass particles or as crystals in lithic clasts. Volcanic fallout ash particles formed the major fraction of the magnetic extract from each sediment sample. Three groups of volcanic ashes were identified: trachytic ashes, basaltic ashes with sideromelane and tachylite shards, and palagonitic ashes. These three groups could be equally well defined based on their magnetic hysteresis properties and alternating field demagnetization curves. The highest coercivities of all samples were found for the tachylite, due to the submicrometre-size titanomagnetite inclusions in the matrix. Trachytic ashes had intermediate magnetic properties between the single-domain-type tachylites and the palagonitic (altered) basaltic ashes with low coercivities. Samples which contained mixtures of these different volcanic ashes could be distinguished from the three types of ashes based on their magnetic characteristics. There was neither evidence of biogenic magnetofossils in the transmission electron micrographs nor did we find magnetic particles derived from continental Antarctica. The presence of dispersed volcanic fallout ashes between visible ash layers suggests continuous explosive volcanic activity on the Kerguelen Plateau in the South Indian Ocean since the early Eocene. The continuous fallout of volcanic ash from explosive volcanism on the Kerguelen Archipelago is the source of the magnetic particles and thus responsible for the magnetostratigraphy of the nannofossil oozes drilled during Leg 120.

Freshwater arsenic detoxification through selenium-enriched food supplements. A proteomic approach

Dissertação apresentada para a obtenção do grau de doutor em Bioquímica pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

Porous structures for the purification of biopharmaceuticals

This work aimed at the development of a (bio)polymeric monolithic support for biopharmaceuticals purification and/or capture. For that, it was assured that functional groups on its surface were ready to be involved in a plethora of chemical reactions for incorporation of the desired and most suitable ligand. Using cryogelation as preparation method a screening on multiple combinations of materials was performed in order to create a potentially efficient support with the minimal footprint, i.e. a monolithic support with reasonable mechanical properties, highly permeable, biocompatible, ready to use, with gravitational performance and minimal unspecific interactions towards the target molecules, but also biodegradable and produced from renewable materials. For the pre-selection all monoliths were characterized physico-chemically and morphologically; one agarose-based and two chitosan-based monoliths were then subjected to further characterizations before and after their modification with magnetic nanoparticles. These three specimens were finally tested towards adenovirus and the recovery reached 84% for the chitosan-GMA plain monolith prepared at -80°C. Monoliths based on chitosan and PVA were prepared in the presence and absence of magnetic particles, and tested for the isolation of GFP directly from crude cellular extracts. The affinity ligand A4C7 previously selected for GFP purification was synthesized on the monolith. The results indicated that the solid-phase synthesis of the ligand directly onto the monolith might require optimization and that the large pores of the monoliths are unsuitable for the purification of small proteins, such as GFP.

Electroquímica de sustancias de interés en los sistemas agroalimentario y de sanidad animal. Desarrollo de biosensores electroquímicos. Aplicaciones analíticas.Electrochemistry of substances of interest in agroalimentary and animal health systems. Development of electrochemical biosensors. Analytical applications.

Se estudiarán los mecanismos de reacción electroquímica de las micotoxinas (metabolitos tóxicos generados por hongos) citrinina (CIT), patulina (PAT) y moniliformina (MON), de los antioxidantes naturales alfa, beta, gama y delta tocoferoles, de los flavonoides fisetina (FIS), morina (MOR), luteolina (LUT), rutina (RUT), buteina (BUT), naringenina (NAR) y miricetina (MIR) y de las hormonas esteroides estradiol (EDIOL), estrona (EONA) y estriol (ETRIOL). Por otra parte, se implementarán técnicas electroanalíticas para la detección y cuantificación de estos sustratos en muestras de matrices naturales que los contengan. Se realizará el diseño y caracterización de biosensores enzimáticos a partir de peroxidasas y/o fosfatasa alcalina para la determinación de la micotoxina CIT y de los flavonoides y, por otro, de inmunosensores para las micotoxinas ocratoxina A (OTA) y PAT y hormonas. Para el anclaje de enzimas y/o anticuerpos, se estudiarán las propiedades de electrodos modificados por monocapas autoensambladas, nanotubos de carbono y partículas magnéticas. Se usarán las técnicas de voltamperometría cíclica, de onda cuadrada y de redisolución con acumulación adsortiva, espectroscopías de impedancia electroquímica, electrólisis a potencial controlado, uv-vis e IR, microbalanza de cristal de cuarzo y microscopías de alta resolución (SEM, TEM, AFM). La importancia de este proyecto apunta a la obtención de nuevos datos electroquímicos de los sustratos indicados y conocimientos relacionados con la aplicación de electrodos modificados en la preparación de biosensores y en el desarrollo de técnicas alternativas para la determinación de los analitos mencionados precedentemente. Electrochemical reaction mechanisms of mycotoxins (toxic metabolites generated by fungi) citrinin (CIT), Patulin (PAT) and moniliformin (MON), natural antioxidants alpha, beta, gamma and delta tocopherols, flavonoids fisetin (FIS), morin (MOR), luteolin (LUT), rutin (RUT), butein (BUT), naringenin (NAR), miricetin (MIR) and steroid hormones estradiol (EDIOL), estrone (EONA) and estriole (ETRIOL) will be explored. On the other hand, electroanalytical techniques for the detection and quantification of these substrates in samples of natural matrices will be implemented. The design and characterization of enzymatic biosensors from peroxidases and/or from alkaline phosphatase for the determination of CIT and flavonoids, and also of inmunosensors for ochratoxin A (OTA) and PAT and hormones will be performed. For the anchor of enzymes and/or antibody, properties of electrodes modified by self assembled monolayers, carbon nanotubes and magnetic particles will be explored. Cyclic, square wave and adsorptive stripping voltammetries, electrochemical impedance spectroscopy, controlled potential electrolysis, uv-vis and IR, quartz crystal microbalance and high-resolution microcopies (SEM, TEM, AFM) will be used. The importance of this project is aimed at obtaining new electrochemical data for the indicated substrates and knowledge on the application of modified electrodes in preparation of biosensors and in the development of alternative techniques for the determination of the above-mentioned analytes.

Microinductive signal conditioning with resonant differential filters: high-sensitivity biodetection applications

Inductive-based devices integrated with Si technology for biodetection applications are characterized, using simple resonant differential filter configurations. This has allowed the corroboration of the viability of the proposed circuits, which are characterized by their very high simplicity, for microinductive signal conditioning in high-sensitivity sensor devices. The simulation of these simple circuits predicts sensitivities of the differential output voltage which can achieve values in the range of 0.1-1 V/nH, depending on the coil parameters. These very high-sensitivity values open the possibility for the experimental detection of extremely small inductance changes in the devices. For real microinductive devices, both series resistance and parasitic capacitive components contribute to the decrease of the differential circuit sensitivity. Nevertheless, measurements performed using micro-coils fabricated with relatively high series resistance and coupling parasitic effects have allowed detection of changes in the range of 2 nH. which are compatible with biodetection applications with estimated detection limits below the picomolarity range.