Molecularly Imprinted Polymers for the isolation of bioactive naphthoquinones from plant extracts

Molecularly Imprinted Polymers (MIPs) targeting shikonin, a potent antioxidant and wound healing agent, have been prepared using methacrylic acid (MAA) and 2-diethylaminoethyl methacrylate (DEAEMA) as functional monomers. An investigation of solution association between shikonin and both acidic and basic functional monomers by UV-Vis titrations, suggested stronger affinity towards the basic functionality. Strong inhibition of the co-polymerisation reaction of such basic monomers was observed, but was overcome by reduction of the amount of template used during polymer synthesis. Polymer morphology was severely impacted by the template’s radical scavenging behaviour as demonstrated by solid state NMR spectroscopy measurements. HPLC evaluation of the final materials in polar conditions revealed limited imprinting effects and selectivity, with the MAA polymers exhibiting marginally better performance. During application of the polymers as MI-SPE sorbents in non-polar solvents it was found that the DEAEMA based polymer was more selective towards shikonin compared to the MAA counterpart, while shikonin recoveries of up to 72% were achieved from hexane solutions of a commercial sample of shikonin, hexane extract of Alkanna tinctoria roots and a commercial pharmaceutical ointment.

Electrochemical sensor for catechol and dopamine based on a catalytic molecularly imprinted polymer-conducting polymer hybrid recognition element

One of the difficulties with using molecularly imprinted polymers (MIPs) and other electrically insulating materials as the recognition element in electrochemical sensors is the lack of a direct path for the conduction of electrons from the active sites to the electrode. We have sought to address this problem through the preparation and characterization of novel hybrid materials combining a catalytic MIP, capable of oxidizing the template, catechol, with an electrically conducting polymer. In this way a network of "molecular wires" assists in the conduction of electrons from the active sites within the MIP to the electrode surface. This was made possible by the design of a new monomer that combines orthogonal polymerizable functionality; comprising an aniline group and a methacrylamide. Conducting films were prepared on the surface of electrodes (Au on glass) by electropolymerization of the aniline moiety. A layer of MIP was photochemically grafted over the polyaniline, via N,N'-diethyldithiocarbamic acid benzyl ester (iniferter) activation of the methacrylamide groups. Detection of catechol by the hybrid-MIP sensor was found to be specific, and catechol oxidation was detected by cyclic voltammetry at the optimized operating conditions: potential range -0.6 V to +0.8 V (vs Ag/AgCl), scan rate 50 mV/s, PBS pH 7.4. The calibration curve for catechol was found to be linear to 144 µM, with a limit of detection of 228 nM. Catechol and dopamine were detected by the sensor, whereas analogues and potentially interfering compounds, including phenol, resorcinol, hydroquinone, serotonin, and ascorbic acid, had minimal effect (=3%) on the detection of either analyte. Nonimprinted hybrid electrodes and bare gold electrodes failed to give any response to catechol at concentrations below 0.5 mM. Finally, the catalytic properties of the sensor were characterized by chronoamperometry and were found to be consistent with Michaelis-Menten kinetics. © 2009 American Chemical Society.

Polymerisable squaramide receptors for anion binding and sensing

A novel series of polymerisable squaramides has been synthesised in high yields using simple chemical reactions, and evaluated in the binding of anionic species. These vinyl monomers can be used as functional building blocks in co-polymerisations with a plethora of co-monomers or cross-linkers, grace to their compatibility with free-radical polymerisation reactions. Aromatic substituted squaramides were found to be the strongest receptors, while binding of certain anions was accompanied by a strong colour change, attributed to the de-protonation of the squaramide. The best performing squaramide monomers were incorporated in molecularly imprinted polymers (MIPs) targeting a model anion and their capacities and selectivity were evaluated by rebinding experiments. Polymers prepared using the new squaramide monomers were compared to urea based co-polymers, and were found to contain up to 80% of the theoretical maximum number of binding sites, an exceptionally high value compared to previous reports. Strong polymer colour changes were observed upon rebinding of certain anions, equivalent to those witnessed in solution, paving the way for application of such materials in anion sensing devices.



Graphical abstract: Polymerisable squaramide receptors for anion binding and sensing

Herschel key program HERITAGE:A far-infrared source catalog for the Magellanic Clouds

Observations from the HERschel Inventory of the Agents of Galaxy Evolution (HERITAGE ) have been used to identify dusty populations of sources in the Large and Small Magellanic Clouds (LMC and SMC). We conducted the study using the HERITAGE catalogs of point sources available from the Herschel Science Center from both the Photodetector Array Camera and Spectrometer (PACS; 100 and 160 μm) and Spectral and Photometric Imaging Receiver (SPIRE; 250, 350, and 500 μm) cameras. These catalogs are matched to each other to create a Herschel band-merged catalog and then further matched to archival Spitzer IRAC and MIPS catalogs from the Spitzer Surveying the Agents of Galaxy Evolution (SAGE) and SAGE-SMC surveys to create single mid- to far-infrared (far-IR) point source catalogs that span the wavelength range from 3.6 to 500 μm. There are 35,322 unique sources in the LMC and 7503 in the SMC. To be bright in the FIR, a source must be very dusty, and so the sources in the HERITAGE catalogs represent the dustiest populations of sources. The brightest HERITAGE sources are dominated by young stellar objects (YSOs), and the dimmest by background galaxies. We identify the sources most likely to be background galaxies by first considering their morphology (distant galaxies are point-like at the resolution of Herschel) and then comparing the flux distribution to that of the Herschel Astrophysical Terahertz Large Area Survey (ATLAS ) survey of galaxies. We find a total of 9745 background galaxy candidates in the LMC HERITAGE images and 5111 in the SMC images, in agreement with the number predicted by extrapolating from the ATLAS flux distribution. The majority of the Magellanic Cloud-residing sources are either very young, embedded forming stars or dusty clumps of the interstellar medium. Using the presence of 24 μm emission as a tracer of star formation, we identify 3518 YSO candidates in the LMC and 663 in the SMC. There are far fewer far-IR bright YSOs in the SMC than the LMC due to both the SMC's smaller size and its lower dust content. The YSO candidate lists may be contaminated at low flux levels by background galaxies, and so we differentiate between sources with a high ("probable") and moderate ("possible ") likelihood of being a YSO. There are 2493/425 probable YSO candidates in the LMC/SMC. Approximately 73% of the Herschel YSO candidates are newly identified in the LMC, and 35% in the SMC. We further identify a small population of dusty objects in the late stages of stellar evolution including extreme and post-asymptotic giant branch, planetary nebulae, and supernova remnants. These populations are identified by matching the HERITAGE catalogs to lists of previously identified objects in the literature. Approximately half of the LMC sources and one quarter of the SMC sources are too faint to obtain accurate ample FIR photometry and are unclassified.

Stoichiometric Molecularly Imprinted Polymers for the Recognition of Anti-Cancer Pro-drug Tegafur

Molecularly Imprinted Polymers (MIPs) targeting tegafur, an anti-cancer 5-fluorouracil pro-drug, have been prepared by stoichiometric imprinting using 2,6-bis(acrylamido)pyridine (BAAPy) as the functional monomer. Solution association between tegafur and BAAPy was studied by 1H NMR titration, which confirmed the formation of 1:1 complexes with an affinity constant of 574±15 M-1 ¬in CDCl3. Evaluation of the synthesised materials by HPLC and equilibrium rebinding experiments revealed high selectivity of the imprinted polymer for the pro-drug versus 5-fluorouracil and other competing analytes, with maximum imprinting factors of 25.3 and a binding capacity of 45.1 μmol g-1. The synthesised imprinted polymer was employed in solid-phase extraction of the pro-drug using an optimised protocol that included a simple wash with the porogen used in the preparation of the material. Tegafur recoveries of up to 96% were achieved from aqueous samples and 92% from urine samples spiked with the template and three competing analytes. The results demonstrate the potential of the prepared polymers in the pre-concentration of tegafur from biological samples, which could be an invaluable tool in the monitoring of patient compliance and drug uptake and excretion.

FPGA based Streaming Image Processing Processor (SIPPro) architecture to accelerate data intensive applications

Current data-intensive image processing applications push traditional embedded architectures to their limits. FPGA based hardware acceleration is a potential solution but the programmability gap and time consuming HDL design flow is significant. The proposed research approach to develop “FPGA based programmable hardware acceleration platform” that uses, large number of Streaming Image processing Processors (SIPPro) potentially addresses these issues. SIPPro is pipelined in-order soft-core processor architecture with specific optimisations for image processing applications. Each SIPPro core uses 1 DSP48, 2 Block RAMs and 370 slice-registers, making the processor as compact as possible whilst maintaining flexibility and programmability. It is area efficient, scalable and high performance softcore architecture capable of delivering 530 MIPS per core using Xilinx Zynq SoC (ZC7Z020-3). To evaluate the feasibility of the proposed architecture, a Traffic Sign Recognition (TSR) algorithm has been prototyped on a Zedboard with the color and morphology operations accelerated using multiple SIPPros. Simulation and experimental results demonstrate that the processing platform is able to achieve a speedup of 15 and 33 times for color filtering and morphology operations respectively, with a significant reduced design effort and time.

New molecularly-imprinted polymer for carnitine and its application as ionophore in potentiometric selective membranes

Carnitine (CRT) is a biological metabolite found in urine that contributes in assessingseveral disease conditions, including cancer. Novel quick screening procedures for CRT are therefore fundamental. This work proposes a novel potentiometric device where molecularly imprinted polymers (MIPs) were used as ionophores. The host-tailored sites were imprinted on a polymeric network assembled by radical polymerization of methacrylic acid (MAA) and trimethylpropane trimethacrylate (TRIM). Non-imprinted polymers (NIPs) were produced as control by removing the template from the reaction media. The selective membrane was prepared by dispersing MIP or NIP particles in plasticizer and poly(vinyl chloride), PVC, and casting this mixture over a solid contact support made of graphite. The composition of the selective membrane was investigated with regard to kind/amount of sensory material (MIP or NIP), and the need for a lipophilic additive. Overall, MIP sensors with additive exhibited the best performance, with near-Nernstian response down to ~ 1 × 10− 4 mol L− 1, at pH 5, and a detection limitof ~ 8 × 10− 5 mol L− 1. Suitable selectivity was found for all membranes, assessed by the matched potential method against some of the most common species in urine (urea, sodium, creatinine, sulfate, fructose and hemoglobin). CRT selective membranes including MIP materials were applied successfully to the potentiometric determination of CRT in urine samples.

New sensing materials of molecularly-imprinted polymers for the selective recognition of Chlortetracycline

As a result of the stressful conditions in aquaculture facilities there is a high risk of bacterial infections among cultured fish. Chlortetracycline (CTC) is one of the antimicrobials used to solve this problem. It is a broad spectrum antibacterial active against a wide range of Gram-positive and Gram-negative bacteria. Numerous analytical methods for screening, identifying, and quantifying CTC in animal products have been developed over the years. An alternative and advantageous method should rely on expeditious and efficient procedures providing highly specific and sensitive measurements in food samples. Ion-selective electrodes (ISEs) could meet these criteria. The only ISE reported in literature for this purpose used traditional electro-active materials. A selectivity enhancement could however be achieved after improving the analyte recognition by molecularly imprinted polymers (MIPs). Several MIP particles were synthesized and used as electro-active materials. ISEs based in methacrylic acid monomers showed the best analytical performance according to slope (62.5 and 68.6 mV/decade) and detection limit (4.1 × 10−5 and 5.5 × 10−5 mol L−1). The electrodes displayed good selectivity. The ISEs are not affected by pH changes ranging from 2.5 to 13. The sensors were successfully applied to the analysis of serum, urine and fish samples.

Selective recognition in potentiometric transduction of amoxicillin by molecularly imprinted materials

The indiscriminate use of antibiotics in food-producing animals has received increasing attention as a contributory factor in the international emergence of antibiotic-resistant bacteria (Woodward in Pesticide, veterinary and other residues in food, CRC Press, Boca Raton, 2004). Numerous analytical methods for quantifying antibacterial residues in edible animal products have been developed over years (Woodward in Pesticide, veterinary and other residues in food, CRC Press, Boca Raton, 2004; Botsoglou and Fletouris in Handbook of food analysis, residues and other food component analysis, Marcel Dekker, Ghent, 2004). Being Amoxicillin (AMOX) one of those critical veterinary drugs, efforts have been made to develop simple and expeditious methods for its control in food samples. In literature, only one AMOX-selective electrode has been reported so far. In that work, phosphotungstate:amoxycillinium ion exchanger was used as electroactive material (Shoukry et al. in Electroanalysis 6:914–917, 1994). Designing new materials based on molecularly imprinted polymers (MIPs) which are complementary to the size and charge of AMOX could lead to very selective interactions, thus enhancing the selectivity of the sensing unit. AMOX-selective electrodes used imprinted polymers as electroactive materials having AMOX as target molecule to design a biomimetic imprinted cavity. Poly(vinyl chloride), sensors of methacrylic acid displayed Nernstian slopes (60.7 mV/decade) and low detection limits (2.9 × 10−5 mol/L). The potentiometric responses were not affected by pH within 4–5 and showed good selectivity. The electrodes were applied successfully to the analysis of real samples.

Improving the early diagnostic of prostate cancer by multiple biomarker detection with new biosensing devices

Prostate cancer (PCa) is the most common form of cancer in men, in Europe (World Health Organization data). The most recent statistics, in Portuguese territory, confirm this scenario, which states that about 50% of Portuguese men may suffer from prostate cancer and 15% of these will die from this condition. Its early detection is therefore fundamental. This is currently being done by Prostate Specific Antigen (PSA) screening in urine but false positive and negative results are quite often obtained and many patients are sent to unnecessary biopsy procedures. This early detection protocol may be improved, by the development of point-of-care cancer detection devices, not only to PSA but also to other biomarkers recently identified. Thus, the present work aims to screen several biomarkers in cultured human prostate cell lines, serum and urine samples, developing low cost sensors based on new synthetic biomaterials. Biomarkers considered in this study are the following: prostate specific antigen (PSA), annexin A3 (ANXA3), microseminoprotein-beta (MSMB) and sarcosine (SAR). The biomarker recognition may occurs by means of molecularly imprinted polymers (MIP), which are a kind of plastic antibodies, and enzymatic approaches. The growth of a rigid polymer, chemically stable, using the biomarker as a template allows the synthesis of the plastic antibody. MIPs show high sensitivity/selectivity and present much longer stability and much lower price than natural antibodies. This nanostructured material was prepared on a carbon solid. The interaction between the biomarker and the sensing-material produces electrical signals generating quantitative or semi-quantitative data. These devices allow inexpensive and portable detection in point-of-care testing.

Genèse de l’immunopeptidome du CMH de classe I

La différentiation entre le « soi » et le « non-soi » est un processus biologique essentiel à la vie. Les peptides endogènes présentés par les complexes majeurs d’histocompatibilité de classe I (CMH I) représentent le fondement du « soi » pour les lymphocytes T CD8+. On donne le nom d’immunopeptidome à l’ensemble des peptides présentés à la surface cellulaire par les molécules du CMH I. Nos connaissances concernant l’origine, la composition et la plasticité de l’immunopeptidome restent très limitées. Dans le cadre de cette thèse, nous avons développé une nouvelle approche par spectrométrie de masse permettant de définir avec précision : la nature et l’abondance relative de l’ensemble des peptides composant l’immunopeptidome. Nous avons trouvé que l’immunopeptidome, et par conséquent la nature du « soi » immun, est surreprésenté en peptides provenant de transcrits fortement abondants en plus de dissimuler une signature tissu-spécifique. Nous avons par la suite démontré que l’immunopeptidome est plastique et modulé par l’activité métabolique de la cellule. Nous avons en effet constaté que les modifications du métabolisme cellulaire par l’inhibition de mTOR (de l’anglais mammalian Target Of Rapamycin) provoquent des changements dynamiques dans la composition de l’immunopeptidome. Nous fournissons également la première preuve dans l’étude des systèmes que l’immunopeptidome communique à la surface cellulaire l’activité de certains réseaux biochimiques ainsi que de multiples événements métaboliques régulés à plusieurs niveaux à l’intérieur de la cellule. Nos découvertes ouvrent de nouveaux horizons dans les domaines de la biologie des systèmes et de l’immunologie. En effet, notre travail de recherche suggère que la composition de l’immunopeptidome est modulée dans l’espace et le temps. Il est par conséquent très important de poursuivre le développement de méthodes quantitatives au niveau des systèmes qui nous permettront de modéliser la plasticité de l’immunopeptidome. La simulation et la prédiction des variations dans l’immunopeptidome en réponse à différents facteurs cellulaires intrinsèques et extrinsèques seraient hautement pertinentes pour la conception de traitements immunothérapeutiques.

Evolutionäre Optimierung von Mensch-Maschine-Schnittstellen

Vorgestellt wird eine weltweit neue Methode, Schnittstellen zwischen Menschen und Maschinen für individuelle Bediener anzupassen. Durch Anwenden von Abstraktionen evolutionärer Mechanismen wie Selektion, Rekombination und Mutation in der EOGUI-Methodik (Evolutionary Optimization of Graphical User Interfaces) kann eine rechnergestützte Umsetzung der Methode für Graphische Bedienoberflächen, insbesondere für industrielle Prozesse, bereitgestellt werden. In die Evolutionäre Optimierung fließen sowohl die objektiven, d.h. messbaren Größen wie Auswahlhäufigkeiten und -zeiten, mit ein, als auch das anhand von Online-Fragebögen erfasste subjektive Empfinden der Bediener. Auf diese Weise wird die Visualisierung von Systemen den Bedürfnissen und Präferenzen einzelner Bedienern angepasst. Im Rahmen dieser Arbeit kann der Bediener aus vier Bedienoberflächen unterschiedlicher Abstraktionsgrade für den Beispielprozess MIPS ( MIschungsProzess-Simulation) die Objekte auswählen, die ihn bei der Prozessführung am besten unterstützen. Über den EOGUI-Algorithmus werden diese Objekte ausgewählt, ggf. verändert und in einer neuen, dem Bediener angepassten graphischen Bedienoberfläche zusammengefasst. Unter Verwendung des MIPS-Prozesses wurden Experimente mit der EOGUI-Methodik durchgeführt, um die Anwendbarkeit, Akzeptanz und Wirksamkeit der Methode für die Führung industrieller Prozesse zu überprüfen. Anhand der Untersuchungen kann zu großen Teilen gezeigt werden, dass die entwickelte Methodik zur Evolutionären Optimierung von Mensch-Maschine-Schnittstellen industrielle Prozessvisualisierungen tatsächlich an den einzelnen Bediener anpaßt und die Prozessführung verbessert.

Analysis of the circadian system of the cockroach Rhyparobia (Leucophaea) maderae

Biologische Rhythmen bestimmen das gesamte Leben auf der Erde. Dabei scheint der circadiane Rhythmus der bekannteste zu sein, welcher durch eine Periodendauer von etwa (lat. circa) 24 Stunden gekennzeichnet ist. Dieser seit Jahrmillionen täglich stattfindende Wechsel von Hell- und Dunkelphasen führte zur Entwicklung von inneren Uhren in nahezu allen Organismen, welche die Physiologie und das Verhalten steuern. In der Schabe Rhyparobia (Leucophaea) maderae, einem etablierten Modellorganismus der circadianen Rhythmusforschung, konnte die innere Uhr auf die akzessorischen Medulla (AMe) eingegrenzt werden. Da neben klassischen Neurotransmittern auch Neuropeptide unablässig für die Aufrechterhaltung des endogenen Rhythmus oder aber für Synchronisationsprozesse sind, bestand der Hauptfokus der Arbeit in der Analyse einer möglichen Beteiligung des myoinhibitorischen Neuropeptids (MIP) am circadianen System von R. maderae. Mittels MALDI-TOF Massenspektrometrie konnten fünf Rhyparobia-MIPs in Präparationen der AMe identifiziert und zwei vollständig sequenziert werden. Immunzytochemische Analysen zeigten neben einer weiten MIP-Immunreaktivität im Gehirn eine dichte Innervierung der AMe und mit ihr assoziierten Neuronengruppen. Kolokalisation von MIP- und Pigment-dispersing Faktor-Immunreaktivitäten wurden in mindestens zwei circadianen Schrittmacherzellen beobachtet. Immunreaktivitäten in diversen Kommissuren lassen den Schluss zu, dass Rhyparobia-MIPs als Kopplungsfaktoren beider akzessorischen Medullae agieren. Immunzytochemische Kolokalisationsexperimente mit anderen neuroaktiven Kandidaten für den Lichteingangsweg zeigen, dass Rhyparobia-MIPs auch an der Übermittlung photischer Eingänge in die AMe vom ipsi- und kontralateralen Komplexauge beteiligt sein könnten. Darüber hinaus konnte durch Injektionsexperimente kombiniert mit Verhaltensassays gezeigt werden, dass mindestens Rhyparobia-MIP-1 und -2 Eingangssignale in die AMe sind. Des Weiteren konnte mittels enzyme-linked immunosorbent Assays gezeigt werden, dass MIP in der AMe und dem optischen Lobus mindestens über G-Protein gekoppelte Rezeptoren agiert. Diese Rezeptoren scheinen zudem tageszeitabhängig unterschiedlich exprimiert oder aber unterschiedlich sensitiv zu sein.

The function of SIFamide, PDF, and further neuropeptides in the circadian system of Rhyparobia maderae

Der täglich Wechsel von Hell- und Dunkelphasen führte während der Evolution zur Entwicklung innerer Uhren in nahezu allen Organismen. In der Schabe Rhyparobia maderae lokalisierten Läsions- und Transplantationsexperimente die innere Uhr in der akzessorischen Medulla (AME). Dieses kleine birnenförmige Neuropil am ventromedianen Rand der Medulla ist mit etwa 240 Neuronen assoziiert, die eine hohe Anzahl an zum Teil kolokalisierten Neuropeptiden und Neurotransmittern exprimieren. Diese Signalstoffe scheinen essentiell zu sein für die Synchronisation der inneren Uhr mit der Umwelt, der Kopplung der beiden bilateralen AME, der Aufrechterhaltung des circadianen Rhythmus sowie der zeitlichen Steuerung bestimmter Verhaltensweisen. Während die Funktion einiger dieser neuronalen Botenstoffe bereits gut untersucht ist, fehlt sie für andere. Zudem ist noch ungeklärt, wann einzelne Botenstoffe im circadianen Netzwerk agieren. Im Fokus dieser Studie lag daher die Erforschung der Funktion von SIFamide und Corazonin im circadianen Netzwerk sowie die weitere Untersuchung der Funktionen der Neuropeptide MIP und PDF. Es konnte gezeigt werden, dass SIFamide auch in R. maderae in vier großen neurosekretorischen Zellen in der pars intercerebralis exprimiert wird. Varikosenreiche SIFamide-immureaktive (-ir) Fasern innervieren eine Vielzahl an Neuropilen und finden sich auch in der Hüllregion der AME. Injektionsexperimente resultierten in einer monophasischen Phasen-Antwort-Kurve (PRC) mit einer Verzögerung zur frühen subjektiven Nacht. SIFamide ist also ein Eingangssignal für das circadiane Netzwerk und könnte in der Kontrolle der Schalf/Wach-Homöostase involviert sein. Auch Corazonin fungiert als Eingangssignal. Da die Injektionsexperimente in einer monophasischen PRC mit einem Phasenvorschub zur späten subjektiven Nacht resultierten, ist davon auszugehen, dass die Corazonin-ir AME-Zelle Bestandteil des Morning-Oszillator-Netzwerkes in R. maderae ist. Darüber hinaus zeigten Backfill-Experimente, dass MIP an der Kopplung beider AMAE beteiligt ist. ELISA-Quantifizierungen der PDF-Level im Tagesverlauf ergaben Schwankungen in der Konzentration, die auf eine Ausschüttung des Peptids während des Tages hindeuten – ähnlich wie es in Drosophila melanogaster der Fall ist. Dies spiegelt sich in der vervollständigten bimodalen PDF-PRC wieder. Hier führen Injektionen zu einem Phasenvorschub, bevor maximale Peptidlevel erreicht werden, sowie zu einer Phasenverzögerung, sobald die Peptidlevel wieder zu sinken beginnen. Die PRCs erlauben somit Rückschlüsse auf den Zeitpunkt der maximalen Peptidfreisetzung. PDF-ir Neuriten findet sich zudem in sämtlichen Ganglien des ventralen Strickleiternervensystems, was eine Funktion in der Kontrolle der Prozesse impliziert, die durch die Mustergeneratoren in Thorakal- und Abdominalganglien gesteuert werden.

Investigation of Multiphase Power Converter using Integrated Coupled Inductor Regarding Electric Vehicle Application

The challenge of reducing carbon emission and achieving emission target until 2050, has become a key development strategy of energy distribution for each country. The automotive industries, as the important portion of implementing energy requirements, are making some related researches to meet energy requirements and customer requirements. For modern energy requirements, it should be clean, green and renewable. For customer requirements, it should be economic, reliable and long life time. Regarding increasing requirements on the market and enlarged customer quantity, EVs and PHEV are more and more important for automotive manufactures. Normally for EVs and PHEV there are two important key parts, which are battery package and power electronics composing of critical components. A rechargeable battery is a quite important element for achieving cost competitiveness, which is mainly used to story energy and provide continue energy to drive an electric motor. In order to recharge battery and drive the electric motor, power electronics group is an essential bridge to convert different energy types for both of them. In modern power electronics there are many different topologies such as non-isolated and isolated power converters which can be used to implement for charging battery. One of most used converter topology is multiphase interleaved power converter, pri- marily due to its prominent advantages, which is frequently employed to obtain optimal dynamic response, high effciency and compact converter size. Concerning its usage, many detailed investigations regarding topology, control strategy and devices have been done. In this thesis, the core research is to investigate some branched contents in term of issues analysis and optimization approaches of building magnetic component. This work starts with an introduction of reasons of developing EVs and PEHV and an overview of different possible topologies regarding specific application requirements. Because of less components, high reliability, high effciency and also no special safety requirement, non-isolated multiphase interleaved converter is selected as the basic research topology of founded W-charge project for investigating its advantages and potential branches on using optimized magnetic components. Following, all those proposed aspects and approaches are investigated and analyzed in details in order to verify constrains and advantages through using integrated coupled inductors. Furthermore, digital controller concept and a novel tapped-inductor topology is proposed for multiphase power converter and electric vehicle application.