Geometric isomers of chloro(6-methyl-1,4,8,11-tetraazacyclotetradecane-6-amine)cobalt(III) tetrachlorozincate(II)

The crystal structures of a pair of cis and trans isomers of the macrocyclic chloropentaamine title complex, as their tetrachlorozincate(II) salts, [CoCl(C11H27N5)][ZnCl4], are reported. The two distinct isomeric forms lead to significant variations in the Co-N bond lengths and, furthermore, hydrogen bonding between the complex ions is influenced by the folded (cis) or planar (trans) conformations of the coordinated ligand.

Oxorhenium Complexes Bearing the Water-Soluble Tris(pyrazol-1-yl)methanesulfonate, 1,3,5-Triaza-7-phosphaadamantane, or Related Ligands, as Catalysts for Baeyer-Villiger Oxidation of Ketones

New rhenium(VII or III) complexes [ReO3(PTA)(2)][ReO4] (1) (PTA = 1,3,5-triaza-7-phosphaadamantane), [ReO3(mPTA)][ReO4] (2) (mPTA = N-methyl-1,3,5-triaza-7-phosphaadamantane cation), [ReO3(HMT)(2)] [ReO4] (3) (HMT = hexamethylenetetramine), [ReO3(eta(2)-Tpm)(PTA)][ReO4] (4) [Tpm = hydrotris(pyrazol-1-yl)methane, HC(pz)(3), pz = pyrazolyl), [ReO3(Hpz)(HMT)][ReO4] (5) (Hpz = pyrazole), [ReO(Tpms)(HMT)] (6) [Tpms = tris(pyrazol-1-yl)methanesulfonate, O3SC(pz)(3)(-)] and [ReCl2{N2C(O)Ph} (PTA)(3)] (7) have been prepared from the Re(VII) oxide Re2O2 (1-6) or, in the case of 7, by ligand exchange from the benzoyldiazenido complex [ReCl2(N2C-(O)Ph}(Hpz)(PPh3)(2)], and characterized by IR and NMR spectroscopies, elemental analysis and electrochemical properties. Theoretical calculations at the density functional theory (DFT) level of theory indicated that the coordination of PTA to both Re(III) and Re(VII) centers by the P atom is preferable compared to the coordination by the N atom. This is interpreted in terms of the Re-PTA bond energy and hard-soft acid-base theory. The oxo-rhenium complexes 1-6 act as selective catalysts for the Baeyer-Villiger oxidation of cyclic and linear ketones (e.g., 2-methylcyclohexanone, 2-methylcyclopentanone, cyclohexanone, cyclopentanone, cyclobutanone, and 3,3-dimethyl-2-butanone or pinacolone) to the corresponding lactones or esters, in the presence of aqueous H2O2. The effects of a variety of factors are studied toward the optimization of the process.

Oxidative Leaching of metals from electronic waste with solutions based on quaternary ammonium salts

The treatment of electric and electronic waste (WEEE) is a problem which receives ever more attention. An inadequate treatment results in harmful products ending up in the environment. This project intends to investigate the possibilities of an alternative route for recycling of metals from printed circuit boards (PCBs) obtained from rejected computers. The process is based on aqueous solutions composed of an etchant, either 0.2 M CuCl2.2H2O or 0.2 M FeCl3.6H2O, and a quaternary ammonium salt (quat) such as choline chloride or chlormequat. These solutions are reminiscent of deep eutectic solvents (DES) based on quats. DES are quite similar to ionic liquids (ILs) and are used as well as alternative solvents with a great diversity of physical properties, making them attractive for replacement of hazardous, volatile solvents (e.g. VOCs). A remarkable difference between genuine DES and ILs with the solutions used in this project is the addition of rather large quantities of water. It is shown the presence of water has a lot of advantages on the leaching of metals, while the properties typical for DES still remain. The oxidizing capacities of Cu(II) stem from the existence of a stable Cu(I) component in quat based DES and thus the leaching stems from the activity of the Cu(II)/Cu(I) redox couple. The advantage of Fe(III) in combination with DES is the fact that the Fe(III)/Fe(II) redox couple becomes reversible, which is not true in pure water. This opens perspectives for regeneration of the etching solution. In this project the leaching of copper was studied as a function of gradual increasing water content from 0 - 100w% with the same concentration of copper chloride or iron(III) chloride at room temperature and 80ºC. The solutions were also tested on real PCBs. At room temperature a maximum leaching effect for copper was obtained with 30w% choline chloride with 0.2 M CuCl2.2H2O. The leaching effect is still stronger at 80°C, b ut of course these solutions are more energy consuming. For aluminium, tin, zinc and lead, the leaching was faster at 80ºC. Iron and nickel dissolved easily at room temperature. The solutions were not able to dissolve gold, silver, rhodium and platinum.

Halogen-bonded tris (2,4-Bis(trichloromethyl)-1,3,5,triazapentadienato)-M(III) [M = Mn, Fe, Co] complexes and their catalytic activity in the peroxidative oxidation of 1-phenylethanol to acetophenone

One-pot template condensation of CCl3C=N with ammonia on a metal source [MnCl2 center dot 4H(2)O, FeCl3 center dot 6H(2)O or Co(CH3COO)(2)center dot 4H(2)O] in DMSO led to the formation of tris(2,4-bis(trichloromethyl)-1,3,5-triazapentadienato)-M(III) complexes, [M(NH=C(CCl3)NC(CCl3)=-NH}(3)]center dot n(CH3)(2)SO [M = Mn, n = 1 (1); M = Fe, n = 2 (2); M = Co, n = 2 (3)1, which were characterized using elemental analysis, and IR, ESI-MS and single-crystal X-ray analysis. The role of inter- and intramolecular non-covalent halogen and hydrogen bonds in the synthesis of 1-3 is discussed. It is shown that the crystal ionic radii of the metal ions [68.5 (Co) < 69 (Fe) < 72 (Mn), pm] are related to the corresponding Cl center dot center dot center dot Cl distances [3.178 (3) > 3.155 (2) > 3.133 (1) Al. Compounds 1-3 and the related di(triazapentadienato)-Cu(v) complex [Cu(NH=C(CCl3)NC(CCl3)=NH}2]center dot 2(CH3)(2)SO (4) act as catalyst precursors for the additive-free microwave (MW) assisted homogeneous oxidation of 1-phenylethanol with tert-butylhydroperoxide (TBHP), leading to the formation of acetophenone with yields up to 99% and TONs up to 5.0 x 10(3) after 1 h of low power (10 W) MW irradiation.

Métodos "verdes" de produção de nanomateriais que promovem nanotecnologias sustentáveis

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Química

Solvent-free microwave-assisted peroxidative oxidation of alcohols catalyzed by Iron(III)-TEMPO catalytic systems

The iron(III) complexes [H(EtOH)][FeCl2(L)(2)] (1), [H(2)bipy](1/2)[FeCl2(L)(2)].DMF (2) and [FeCl2(L)(2,2'-bipy)] (3) (L = 3-amino-2-pyrazinecarboxylate; H(2)bipy = doubly protonated 4,4'-bipyridine; 2,2'-bipy = 2,2'-bipyridine, DMF = dimethylformamide) have been synthesized and fully characterized by IR, elemental and single-crystal X-ray diffraction analyses, as well as by electrochemical methods. Complexes 1 and 2 have similar mononuclear structures containing different guest molecules (protonated ethanol for 1 and doubly protonated 4,4'-bipyridine for 2) in their lattices, whereas the complex 3 has one 3-amino-2-pyrazinecarboxylate and a 2,2'-bipyridine ligand. They show a high catalytic activity for the low power (10 W) solvent-free microwave assisted peroxidative oxidation of 1-phenylethanol, leading, in the presence of TEMPO, to quantitative yields of acetophenone [TOFs up to 8.1 x 10(3) h(-1), (3)] after 1 h. Moreover, the catalysts are of easy recovery and reused, at least for four consecutive cycles, maintaining 83 % of the initial activity and concomitant rather high selectivity. 3-Amino-2-pyrazinecarboxylic acid is used to synthesize three new iron(III) complexes which act as heterogeneous catalysts for the solvent-free microwave-assisted peroxidative oxidation of 1-phenylethanol.

The first crystal structure of class III superoxide reductase from Treponema pallidum

J Biol Inorg Chem (2006) 11: 548–558 DOI 10.1007/s00775-006-0104-y

Evaluation of mechanical soft-abrasive blasting and chemical cleaning methods on alkyd-paint graffiti made on carbonate stones

In the context of this dissertation several studies were developed resulting in submission and publication “Evaluation of mechanical soft-abrasive blasting and chemical cleaning methods on alkyd-paint graffiti made on calcareous stones” to Journal of Cultural Heritage. (http://dx.doi.org/10.101 /j.culher.2014.10.004)

Basel III liquidity rules : measuring the impact on portuguese small banks activity

Mestrado em Finanças

Proyecto integrado en el Area de Microelectrónica para el Diseño de circuitos integrados (Programa de Modernización Tecnológica III I-P - PAE 2006)

El objetivo general de este proyecto estratégico es incorporar una actividad de alto valor agregado como es el diseño de circuitos integrados dentro del segmento de alta tecnología de la cadena productiva nacional. Para ello resulta necesario cumplimentar los siguientes objetivos específicos:• Fortalecer los grupos de investigación y desarrollo que realizan tareas dentro de este área temática, tanto en infraestructura como en recursos humanos; • Fortalecer y desarrollar la Industria Electrónica mediante la incorporación de estas nuevas tecnologías en sus productos; • Representar y asistir a los grupos de diseño locales en la búsqueda de oportunidades para realizar “outsourcing” de diseño para compañías del exterior; • Establecer una primer masa crítica de diseñadores, que funcione como impulsora de la actividad en el medio; • Generar una red a nivel local, donde convivan empresas, universidades y profesionales. La mejora continua en las prestaciones de los productos y en los procesos productivos ha llevado a que la microelectrónica esté presente en los más diversos ámbitos de la actividad humana, con la perspectiva de ir incrementando constantemente su participación. Por eso mismo, un país que pretenda insertarse en el mundo de manera soberana no puede menospreciar la necesidad de incrementar la capacidad de su industria en el área. Los componentes de la Cadena de valor de la ME son los siguientes: • Diseño del circuito, con valor agregado de conocimientos y experiencia del diseñador; • Herramientas de Software de diseño (CAD) con verificación y simulación; • Prototipeo de circuitos y ensayo (testing); • Fabricación de chip en línea; •Encapsulado y testeo. Salvo el primer eslabón, los restantes requieren de una gran inversión en infraestructura, con una permanente actualización. Sin embargo, el Diseño de circuitos es perfectamente abordable en la Argentina, dado que solo requiere de conocimiento y experiencia, y se puede realizar sobre computadoras estándar.

Proyecto integrado en el área de microelectrónica para el diseño de circuitos integrados (Programa de Modernización Tecnológica III I-P - PAE 2006).

El objetivo general de este proyecto estratégico es incorporar una actividad de alto valor agregado como es el diseño de circuitos integrados dentro del segmento de alta tecnología de la cadena productiva nacional. Para ello resulta necesario cumplimentar los siguientes objetivos específicos: • Fortalecer los grupos de investigación y desarrollo que realizan tareas dentro de este área temática, tanto en infraestructura como en recursos humanos; • Fortalecer y desarrollar la Industria Electrónica mediante la incorporación de estas nuevas tecnologías en sus productos; • Representar y asistir a los grupos de diseño locales en la búsqueda de oportunidades para realizar "outsourcing" de diseño para compañías del exterior; • Establecer una primer masa crítica de diseñadores, que funcione como impulsora de la actividad en el medio; • Generar una red a nivel local, donde convivan empresas, universidades y profesionales. La mejora continua en las prestaciones de los productos y en los procesos productivos ha llevado a que la microelectrónica esté presente en los más diversos ámbitos de la actividad humana, con la perspectiva de ir incrementando constantemente su participación. Por eso mismo, un país que pretenda insertarse en el mundo de manera soberana no puede menospreciar la necesidad de incrementar la capacidad de su industria en el área. Los componentes de la Cadena de valor de la ME son los siguientes: • Diseño del circuito, con valor agregado de conocimientos y experiencia del diseñador; • Herramientas de Software de diseño (CAD) con verificación y simulación; • Prototipeo de circuitos y ensayo (testing); • Fabricación de chip en línea; • Encapsulado y testeo.

Nereididae (Polychaeta) da costa nordeste do Brasil: III. Gêneros Ceratonereis e Nereis

Ten species belonging to the genera Ceratonereis Kinberg, 1866 and Nereis Linnaeus, 1758 were recorded in estuaries, exposed sandy beaches, shelly soft bottoms, atolls and coral reefs of the Brazilian northeastern coast. Two new species, Nereis serrata, from Ceará coast, and Nereis pseudomoniliformis, from Sergipe coast, are described.

Estudio de la extracción química del fe en madera arqueológica subacuatica tratada previamente con peg 4000

Debido a la gran cantidad de muestras arqueológicas impregnadas con PEG que se encuentran contaminadas por compuestos insolubles de hierro, se plantea la posible extracción y formación de complejos Fe-L (L=PBTC) y sus efectos en (i) la estructura de la matriz orgánica, (ii) la estructura y propiedades físicas del PEG y (iii) el comportamiento de la muestra en la etapa posterior de almacenamiento. El proyecto analiza la formación de compuestos químicos y posibles modificaciones estructurales en el proceso de extracción del hierro. Consiste en un estudio sistemático de un sistema químico y su influencia en los procesos de precipitación de Fe3+ en medio acuoso. El proyecto se fundamenta en: (1) desarrollar un proceso experimental de optimización para la extracción de las sales contaminantes y (2) encontrar las técnicas analíticas óptimas que permitan apreciar modificaciones estructurales de los diferentes sistemas. Se determina la cantidad de hierro extraído mediante A.A. Las interacciones entre PBTC y PEG se analizan por IR. Las modificaciones de determinadas propiedades físicas se determinan por DSC y las estructurales mediante SEM. En las condiciones termodinámicas óptimas se obtiene una extracción superficial del hierro (30-35%). La disolución del PEG origina modificaciones de la masa y el volumen de la muestra

Fate of nickel ion in (II-III) hydroxysulphate green rust synthesized by precipitation and coprecipitation

In order to investigate the efficiency of sulfate green rust (GR2) to remove Ni from solution, GR2 samples were synthesized under controlled laboratory conditions. Some GR2 samples were synthesized from Fe(II) and Fe(III) sulfate salts by precipitation. Other samples were prepared by coprecipitation, of Ni(II), Fe(II) and Fe(III) sulfate salts, i.e., in the presence of Ni. In another sample, Ni(II) sulfate salt was added to pre-formed GR2. After an initial X-ray diffraction (XRD) characterization all samples were exposed to ambient air in order to understand the role of Ni in the transformation of the GR2 samples. XRD was repeated after 45 days. The results showed that Nious GR2 prepared by coprecipitation is isomorphous to Ni-free GR2, i.e. Ni is incorporated into the crystalline structure. Fe(II) was not replaced by Ni(II) in the crystalline structure of GR2 formed prior to exposure to solution-phase Ni. This suggests Ni was adsorbed to the GR2 surface. Sulfate green rust is more efficient in removing Ni from the environment by coprecipitation.