Serum procalcitonin, interleukin-6, soluble intercellular adhesin molecule-1 and IgG to short-chain exocellular lipoteichoic acid as predictors of infection in total joint prosthesis revision

The diagnosis of prosthetic joint infection and its differentiation from aseptic loosening remains problematic. The definitive laboratory diagnostic test is the recovery of identical infectious agents from multiple intraoperative tissue samples; however, interpretation of positive cultures is often complex as infection is frequently associated with low numbers of commensal microorganisms, in particular the coagulase-negative staphylococci (CNS). In this investigation, the value of serum procalcitonin (PCT), interleukin-6 (IL-6) and soluble intercellular adhesion molecule-1 (sICAM-1) as predictors of infection in revision hip replacement surgery is assessed. Furthermore, the diagnostic value of serum IgG to short-chain exocellular lipoteichoic acid (sce-LTA) is assessed in patients with infection due to CNS. Presurgical levels of conventional serum markers of infection including C-reactive protein (CRP), erythrocyte sedimentation rate (ESR) and white blood cell count (WBC) is also established. Forty-six patients undergoing revision hip surgery were recruited with a presumptive clinical diagnosis of either septic (16 patients) or aseptic loosening (30 patients). The diagnosis was confirmed microbiologically and levels of serum markers were determined. Serum levels of IL-6 and sICAM-1 were significantly raised in patients with septic loosening (P=0.001 and P=0.0002, respectively). Serum IgG to sce-LTA was elevated in three out of four patients with infection due to CNS. In contrast, PCT was not found to be of value in differentiating septic and aseptic loosening. Furthermore, CRP, ESR and WBC were significantly higher (P=0.0001, P=0.0001 and P=0.003, respectively) in patients with septic loosening. Serum levels of IL-6, sICAM-1 and IgG to sce-LTA may provide additional information to facilitate the diagnosis of prosthetic joint infection.

Foil rolling : a new interpretation of experimental results

This paper explores a new interpretation of experiments on foil rolling. The assumption that the roll remains convex is relaxed so that the strip profile may become concave, or thicken in the roll gap. However, we conjecture that the concave profile is associated with phenomena which occur after the rolls have stopped. We argue that the yield criterion must be satisfied in a nonconventional manner if such a phenomenon is caused plastically. Finite element analysis on an extrusion problem appears to confirm this conjecture.

Biomechanical force displacement analysis of strength of fixation of tracker holding devices to bone in computer aided joint replacement

Computer aided joint replacement surgery has become very popular during recent years and is being done in increasing numbers all over the world. The accuracy of the system depends to a major extent, on accurate registration and immobility of the tracker attachment devices to the bone. This study was designed to asses the forces needed to displace the tracker attachment devices in the bone simulators. Bone simulators were used to maintain the uniformity of the bone structure during the study. The fixation devices tested were 3mm diameter self drilling, self tapping threaded pin, 4mm diameter self tapping cortical threaded pin, 5mm diameter self tapping cancellous threaded pin and a triplanar fixation device ‘ortholock’ used with three 3mm pins. All the devices were tested for pull out, translational and rotational forces in unicortical and bicortical fixation modes. Also tested was the normal bang strength and forces generated by leaning on the devices. The forces required to produce translation increased with the increasing diameter of the pins. These were 105N, 185N, and 225N for the unicortical fixations and 130N, 200N, 225N for the bicortical fixations for 3mm, 4mm and 5mm diameter pins respectively. The forces required to pull out the pins were 1475N, 1650N, 2050N for the unicortical, 1020N, 3044N and 3042N for the bicortical fixated 3mm, 4mm and 5mm diameter pins. The ortholock translational and pull out strength was tested to 900N and 920N respectively and still it did not fail. Rotatory forces required to displace the tracker on pins was to the magnitude of 30N before failure. The ortholock device had rotational forces applied up to 135N and still did not fail. The manual leaning forces and the sudden bang forces generated were of the magnitude of 210N and 150N respectively. The strength of the fixation pins increases with increasing diameter from three to five mm for the translational forces. There is no significant difference in pull out forces of four mm and five mm diameter pins though it is more that the three mm diameter pins. This is because of the failure of material at that stage rather than the fixation device. The rotatory forces required to displace the tracker are very small and much less that that can be produced by the surgeon or assistants in single pins. Although the ortholock device was tested to 135N in rotation without failing, one has to be very careful not to put any forces during the operation on the tracker devices to ensure the accuracy of the procedure.

Joint venture behaviour in construction industry : an Australia case study

Joint ventures can take many forms and can be formed for different reasons, from sharing resources to creating future business opportunities. At the same time, there is increasing interest and discussion of alternative procurement methods, moving away from traditional procurement systems to relational approaches. Business systems and strategies need to be redefined and move from a short-term project to project culture to a more strategic, long-term perspective. Joint ventures of construction organisations, global and local, have become increasingly popular to deliver large-scale infrastructure construction projects. However, successful strategic collaborations require project organisations to formulate a fit between contractual and operational arrangements for each situation. This study reviews the movement from traditional procurement methods towards relational contracting approaches in Queensland, Australia. The study examines the organisational factors that facilitates sustainable relationship between project organisations and hence, lead to long-term business success. This paper reports on initial findings captured from a survey undertaken with construction contracting organisations in Australia, focusing on the supply chain relationships. Contractors’ perceptions of the relationship management process and the engagement of the supply chain are also presented.

A phenomenological explication of dream interpretation among rural and urban Nguni people

Psychologists investigating dreams in non-Western cultures have generally not considered the meanings of dreams within the unique meaning-structure of the person in his or her societal context. The majority of dream studies in African societies are no exception. Researchers approaching dreams within rural Xhosa and Zulu speaking societies have either adopted an anthropological or a psychodynamic orientation. The latter approach particularly imposes a Western perspective in the interpretation of dream material. There have been no comparable studies of dream interpretation among urban blacks participating in the African Independent Church Movement. The present study focuses on the rural Xhosa speaking people and the urban black population who speak one of the Nguni languages and identify with the African Independent Church Movement. The study is concerned with understanding the meanings of dreams within the cultural context in which they occur. The specific aims of the study are: 1. To explicate the indigenous system of dream interpretation as revealed by acknowledged dream experts. 2. To examine the commonalities and the differences between the interpretation of dreams in two groups, drawn from a rural and urban setting respectively. 3. To elaborate upon the life-world of the participants by the interpretations gained from the above investigation. One hundred dreams and interpretations are collected from two categories of participants referred to as the Rural Group and the Urban Group. The Rural Group is made up of amagqira [traditional healers] and their clients, while the Urban Group consists of prophets and members of the African Independent Churches. Each group includes acknowledged dream experts. A phenomenological methodology is adopted in explicating the data. The methodological precedure involves a number of rigorous stages of expl ication whereby the original data is reduced to Constituent Profiles leading to the construction of a Thematic Index File. By searching and reflect ing upon the data, interpretative themes are identified. These themes are explicated to provide a rigorous description of the interpretative-reality of each group. Themes explicated w i thin the Rural Group are: the physiognomy of the dreamer's life-world as revealed by ithongo, the interpretation of ithongo as revealed through action, the dream relationship as an anticipatory mode-of-existence, iphupha as disclosing a vulnerable mode-of-being, human bodiliness as revealed in dream interpretations and the legitimation of the interpretative-reality within the life-world. Themes explicated within the Urban Group are: the phys iognomy of the dreamer's life-world revealed in their dream-existence, the interpretative-reality revealed through the enaction of dreams, tension between the newer Christian-based cosomology and the traditional cultural-based cosmology, a moral imperative, prophetic perception and human bodiliness, as revealed in dream interpretations and the legitimation of the interpretative-reality within the life-world. The essence of the interpretative-reality of both groups is very similar and is expressed in the notion of relatedness to a cosmic mode-of-being. The cosmic mode-of-being includes a numinous dimension which is expressed through divine presence in the form of ancestors, Holy Spirit or God. These notions cannot be apprehended by theoretical constructs alone but may be grasped and given form in meaning-disclosing intuitions which are expressed in the lifeworld in terms of bodiliness, revelatory knowledge, action and healing. Some differences b e tween the two groups are evident and reveal some conflict between the monotheistic Christian cosmology and the traditional cosmology. Unique aspects of the interpetative-reality of the Urban Group are expressed in terms of difficulties in the urban social environment and the notion of a moral imperative. It is observed that cul tural self-expression based upon traditional ideas continues to play a significant role in the urban environment. The apparent conflict revealed between the respective cosmologies underlies an integration of the aditional meanings with Christian concepts. This finding is consistent with the literature suggesting that the African Independent Church is a syncretic movement. The life-world is based upon the immediate and vivid experience of the numinous as revealed in the dream phenomenon. The participants' approach to dreams is not based upon an explicit theory, but upon an immediate and pathic understanding of the dream phenomenon. The understanding is based upon the interpreter's concrete understanding of the life-world, which includes the possibility of cosmic integration and continuity between the personal and transpersonal realms of being. The approach is characterized as an expression of man's primordial attunement with the cosmos. The approach of the participants to dreams may not b e consistent with a Western rational orientation, but neverthele ss, it is a valid approach . The validity is based upon the immediate life-world of experience which is intelligible, coherent, and above all, it is meaning-giving in revealing life-possibility within the context of human existence.

Early outcomes of patella resurfacing in total knee arthroplasty

Background Patella resurfacing in total knee arthroplasty is a contentious issue. The literature suggests that resurfacing of the patella is based on surgeon preference, and little is known about the role and timing of resurfacing and how this affects outcomes. Methods We analyzed 134,799 total knee arthroplasties using data from the Australian Orthopaedic Association National Joint Replacement Registry. Hazards ratios (HRs) were used to compare rates of early revision between patella resurfacing at the primary procedure (the resurfacing group, R) and primary arthroplasty without resurfacing (no-resurfacing group, NR). We also analyzed the outcomes of NR that were revised for isolated patella addition. Results At 5 years, the R group showed a lower revision rate than the NR group: cumulative per cent revision (CPR) 3.1% and 4.0%, respectively (HR = 0.75, p < 0.001). Revisions for patellofemoral pain were more common in the NR group (17%) than in the R group (1%), and “patella only” revisions were more common in the NR group (29%) than in the R group (6%). Non-resurfaced knees revised for isolated patella addition had a higher revision rate than patella resurfacing at the primary procedure, with a 4-year CPR of 15% and 2.8%, respectively (HR = 4.1, p < 0.001). Interpretation Rates of early revision of primary total knees were higher when the patella was not resurfaced, and suggest that surgeons may be inclined to resurface later if there is patellofemoral pain. However, 15% of non-resurfaced knees revised for patella addition are re-revised by 4 years. Our results suggest an early beneficial outcome for patella resurfacing at primary arthroplasty based on revision rates up to 5 years.