A thematic approach to integrating maths and science for pre-service primary teachers via sustainability

Efforts to improve mathematics and science content knowledge have in many institutions required redefining teacher education through new teaching and learning. See, for example, Peard & Pumadevi (2007) for an account of one such attempt involving the development of a Foundations Unit, Scientific and Quantitative Literacy. This unit is core for all first year pre-service primary teacher education students at Queensland University of Technology (QUT) and two Education Institutes in Malaysia, Institute Perguruan Raja Melewar (IPRM), and Institute Perguruan Teknik (IPT) Kuala Lumpur. Since then, QUT has modified the unit to adopt a thematic approach to the same content. An aim of the unit rewrite was the development of a positive attitude and disposition to the teaching and learning of mathematics and science, with a curiosity and willingness to speculate about and explore the world. Numeracy was specifically identified within the mathematics encountered and appropriately embedded in the science learning area. The importance of the ability to engage in communication of and about mathematics and science was considered crucial to the development of pre-service primary teachers. Cognisance was given to the appropriate selection and use of technology to enhance learning - digital technologies were embedded in the teaching, learning and assessment of the unit to avoid being considered as an optional extra. This was achieved around the theme of “the sustainable school”. This „sustainability‟ theme was selected due to its prominence in Australia‟s futures-oriented National Curriculum which will be implemented in 2011. This paper outlines the approach taken to the implementation of the unit and discusses early indicators of its effectiveness.

A thematic approach to integrating maths and science for pre-service primary teachers via sustainability

Efforts to improve mathematics and science content knowledge have in many institutions required redefining teacher education through new teaching and learning. See, for example, Peard & Pumadevi (2007) for an account of one such attempt involving the development of a Foundations Unit, Scientific and Quantitative Literacy. This unit is core for all first year pre-service primary teacher education students at Queensland University of Technology (QUT) and two Education Institutes in Malaysia, Institute Perguruan Raja Melewar (IPRM), and Institute Perguruan Teknik (IPT) Kuala Lumpur. Since then, QUT has modified the unit to adopt a thematic approach to the same content. An aim of the unit rewrite was the development of a positive attitude and disposition to the teaching and learning of mathematics and science, with a curiosity and willingness to speculate about and explore the world. Numeracy was specifically identified within the mathematics encountered and appropriately embedded in the science learning area. The importance of the ability to engage in communication of and about mathematics and science was considered crucial to the development of pre-service primary teachers. Cognisance was given to the appropriate selection and use of technology to enhance learning - digital technologies were embedded in the teaching, learning and assessment of the unit to avoid being considered as an optional extra. This was achieved around the theme of “the sustainable school”. This ‘sustainability’ theme was selected due to its prominence in Australia’s futures-oriented National Curriculum which will be implemented in 2011. This paper outlines the approach taken to the implementation of the unit and discusses early indicators of its effectiveness.

A SiC-based matrix converter topology for inductive power transfer system

Typical inductive power transfer (IPT) systems employ two power conversion stages to generate a high-frequency primary current from low-frequency utility supply. This paper proposes a matrix-converter-based IPT system, which employs high-speed SiC devices to facilitate the generation of high-frequency current through a single power conversion stage. The proposed matrix converter topology transforms a three-phase low-frequency voltage system to a high-frequency single-phase voltage, which, in turn, powers a series compensated IPT system. A comprehensive mathematical model is developed and power losses are evaluated to investigate the efficiency of the proposed converter topology. Theoretical results are presented with simulations, which are performed in MATLAB/Simulink, in comparison to a conventional two-stage converter. Experimental evident of a prototype IPT system is also presented to demonstrate the applicability of the proposed concept.

Controller synthesis of a bidirectional inductive power interface for electric vehicles

Bidirectional Inductive Power Transfer (IPT) systems are preferred for Vehicle-to-Grid (V2G) applications. Typically, bidirectional IPT systems consist of high order resonant networks, and therefore, the control of bidirectional IPT systems has always been a difficulty. To date several different controllers have been reported, but these have been designed using steady-state models, which invariably, are incapable of providing an accurate insight into the dynamic behaviour of the system A dynamic state-space model of a bidirectional IPT system has been reported. However, currently this model has not been used to optimise the design of controllers. Therefore, this paper proposes an optimised controller based on the dynamic model. To verify the operation of the proposed controller simulated results of the optimised controller and simulated results of another controller are compared. Results indicate that the proposed controller is capable of accurately and stably controlling the power flow in a bidirectional IPT system.

A matrix converter based Inductive Power Transfer system

Typical Inductive Power Transfer (IPT) systems employ two power conversion stages to generate a high frequency current from low frequency utility supply. This paper proposes a matrix converter based IPT system that facilitates the generation of high frequency current through a single power conversion stage. The proposed matrix converter topology transforms a 3-phase low frequency voltage system to a high frequency single phase voltage which in turn powers a series compensated IPT system. A comprehensive mathematical model is developed to investigate the behavior of the proposed IPT topology. Theoretical results are presented in comparison to simulations, which are performed in Matlab/ Simulink, to demonstrate the applicability of the proposed concept and the validity of the developed model.

Cascaded multilevel converter based bidirectional inductive power transfer (BIPT) system

A typical low power IPT system employs an H-Bridge converter with a simple control strategy to generate a high frequency current from DC power supply. This paper proposes a cascaded multilevel converter for bidirectional IPT (BIPT) systems, which is suitable for low to medium power applications as well as for situations such as PV cells where several individual DC sources are to be utilized. A novel modulation strategy is proposed for the multilevel converter with the aim of minimizing switching losses. Series - Series (SS) compensation circuit is adopted for the IPT system and a mathematical model is presented to minimize the coil losses of the system under varying output power. Theoretical results presented in comparison to the simulations to demonstrate the applicability of the proposed concept and the validity of the developed model. The experimental results show the feasibility of the proposed phase shift modulation.

An efficiency optimization scheme for bidirectional inductive power transfer systems

Unidirectional inductive power transfer (UIPT) systems allow loads to consume power while bidirectional IPT (BIPT) systems are more suitable for loads requiring two way power flow such as vehicle to grid (V2G) applications with electric vehicles (EVs). Many attempts have been made to improve the performance of BIPT systems. In a typical BIPT system, the output power is control using the pickup converter phase shift angle (PSA) while the primary converter regulates the input current. This paper proposes an optimized phase shift modulation strategy to minimize the coil losses of a series – series (SS) compensated BIPT system. In addition, a comprehensive study on the impact of power converters on the overall efficiency of the system is also presented. A closed loop controller is proposed to optimize the overall efficiency of the BIPT system. Theoretical results are presented in comparison to both simulations and measurements of a 0.5 kW prototype to show the benefits of the proposed concept. Results convincingly demonstrate the applicability of the proposed system offering high efficiency over a wide range of output power.

Duty and control in intermediary copyright liability: An Australian perspective

In the internet age, copyright owners are increasingly looking to online intermediaries to take steps to prevent copyright infringement. Sometimes these intermediaries are closely tied to the acts of infringement; sometimes – as in the case of ISPs – they are not. In 2012, the Australian High Court decided the Roadshow Films v iiNet case, in which it held that an Australian ISP was not liable under copyright’s authorization doctrine, which asks whether the intermediary has sanctioned, approved or countenanced the infringement. The Australian Copyright Act 1968 directs a court to consider, in these situations, whether the intermediary had the power to prevent the infringement and whether it took any reasonable steps to prevent or avoid the infringement. It is generally not difficult for a court to find the power to prevent infringement – power to prevent can include an unrefined technical ability to disconnect users from the copyright source, such as an ISP terminating users’ internet accounts. In the iiNet case, the High Court eschewed this broad approach in favor of focusing on a notion of control that was influenced by principles of tort law. In tort, when a plaintiff asserts that a defendant should be liable for failing to act to prevent harm caused to the plaintiff by a third party, there is a heavy burden on the plaintiff to show that the defendant had a duty to act. The duty must be clear and specific, and will often hinge on the degree of control that the defendant was able to exercise over the third party. Control in these circumstances relates directly to control over the third party’s actions in inflicting the harm. Thus, in iiNet’s case, the control would need to be directed to the third party’s infringing use of BitTorrent; control over a person’s ability to access the internet is too imprecise. Further, when considering omissions to act, tort law differentiates between the ability to control and the ability to hinder. The ability to control may establish a duty to act, and the court will then look to small measures taken to prevent the harm to determine whether these satisfy the duty. But the ability to hinder will not suffice to establish liability in the absence of control. This article argues that an inquiry grounded in control as defined in tort law would provide a more principled framework for assessing the liability of passive intermediaries in copyright. In particular, it would set a higher, more stable benchmark for determining the copyright liability of passive intermediaries, based on the degree of actual, direct control that the intermediary can exercise over the infringing actions of its users. This approach would provide greater clarity and consistency than has existed to date in this area of copyright law in Australia.

Studies on the Tracking and Erosion Resistance of RTV Silicone Rubber Nanocomposite

One of the problems associated with outdoor polymeric insulators is tracking and erosion of the weathershed which can directly influence the reliability of the power system. Flame retardants are added to the base material to enhance its tracking and erosion resistance. Hydroxide fillers are regarded as the best flame retardants. This paper deals with studies related to nano - sized magnesium dihydroxide (MDH) and micron-sized Alumina Trihydrate (ATH) fillers as flame retardants in RTV silicone rubber. Tracking and erosion resistance studies were carried out on MDH and ATH silicone rubber composites using an inclined plane tracking and erosion (IPT) resistance tester. The MDH filled (5% by wt) composites performed much better than ATH composites in terms of eroded mass, depth of erosion, width and length of erosion. The eroded mass of MDH composite is 49.8 % that of ATH composite which can be attributed to high surface area and higher thermal stability of MDH nanofillers.

One-dimensional zig-zag type coordination polymers of Ni(II) and Cu(II) containing 1,3-benzenedicarboxylate and 1,3-diaminopropane: Structural, spectral and thermal studies

Two coordination polymers [Ni(ipt)(dap)(2)](n) (1) and [Cu(ipt)(dap)H2O](n) center dot nH(2)O (2) with an overall one-dimensional arrangement and having isophthalate (ipt) as bridging moieties and chelating 1,3-diaminopropane (dap) as structure modulating units have been prepared and characterized by crystallographic, spectroscopic and thermo-analytical studies. Both have an overall one-dimensional zig-zag nature but with a distorted octahedral NiN4O2 chromophore for 1 and a distorted square pyramidal CuN2O3 chromophore for 2. Even though the ipt units are acting as bridging units through mono-dentatively coordinating carboxylate functions in both polymers, compound 1 has the carboxylate oxygen linkages at the trans positions, while in 2 the oxygen linkages occur at the cis positions leading to a different type of zig-zag arrangement. Relevant spectral and bonding parameters also could be evaluated for the compounds using UV-Vis and EPR spectra. Thermal stability and possible structural modifications on thermal treatment of the compounds were also investigated and the relevant thermodynamic and kinetic parameters evaluated from the thermal data. (C) 2007 Elsevier B.V. All rights reserved.

An unusual temperature induced isostructural phase transition in a scheelite, Li0.5Ce0.5MoO4

High resolution synchrotron X-ray diffraction, dielectric and Raman scattering study of a scheelite compound Li0.5Ce0.5MoO4 (LCM) revealed that it transforms to a self similar structure above 400 degrees C. The thermally induced isostructural phase transition (IPT), a phenomenon which has rarely been reported in the literature, is preceded by partial softening of the zone centre phonons followed by their hardening above the IPT transition temperature. The high temperature isostructural phase, which exhibits expanded lattice parameters and cell volume, nucleates and grows in the low temperature matrix over a very wide temperature range. Both the phases show nearly identical thermal expansion suggesting similarities in symmetry, unaltered coordination environments around the atoms across the transition.

Phase diagram of the half-filled ionic Hubbard model

We study the phase diagram of the ionic Hubbard model (IHM) at half filling on a Bethe lattice of infinite connectivity using dynamical mean-field theory (DMFT), with two impurity solvers, namely, iterated perturbation theory (IPT) and continuous time quantum Monte Carlo (CTQMC). The physics of the IHM is governed by the competition between the staggered ionic potential Delta and the on-site Hubbard U. We find that for a finite Delta and at zero temperature, long-range antiferromagnetic (AFM) order sets in beyond a threshold U = U-AF via a first-order phase transition. For U smaller than U-AF the system is a correlated band insulator. Both methods show a clear evidence for a quantum transition to a half-metal (HM) phase just after the AFM order is turned on, followed by the formation of an AFM insulator on further increasing U. We show that the results obtained within both methods have good qualitative and quantitative consistency in the intermediate-to-strong-coupling regime at zero temperature as well as at finite temperature. On increasing the temperature, the AFM order is lost via a first-order phase transition at a transition temperature T-AF(U,Delta) or, equivalently, on decreasing U below U-AF(T,Delta)], within both methods, for weak to intermediate values of U/t. In the strongly correlated regime, where the effective low-energy Hamiltonian is the Heisenberg model, IPT is unable to capture the thermal (Neel) transition from the AFM phase to the paramagnetic phase, but the CTQMC does. At a finite temperature T, DMFT + CTQMC shows a second phase transition (not seen within DMFT + IPT) on increasing U beyond U-AF. At U-N > U-AF, when the Neel temperature T-N for the effective Heisenberg model becomes lower than T, the AFM order is lost via a second-order transition. For U >> Delta, T-N similar to t(2)/U(1 - x(2)), where x = 2 Delta/U and thus T-N increases with increase in Delta/U. In the three-dimensional parameter space of (U/t, T/t, and Delta/t), as T increases, the surface of first-order transition at U-AF(T,Delta) and that of the second-order transition at U-N(T,Delta) approach each other, shrinking the range over which the AFM order is stable. There is a line of tricritical points that separates the surfaces of first- and second-order phase transitions.

细胞分裂素的测定及其转基因植物的基因表达和调控的研究

细胞分裂素是一类重要的植物激素，它参与调节许多植物的生命活动过程。本文从几个方面研究了细胞分裂素的作用。 在细胞分裂素的活性测定中，通过改进尾穗蔸苋红素合成法建立了一种简便、准确的生物试法，同时还建立了根据物理化学和免疫学原理而测定细胞分裂素的HPLC和ELISA方法，使得细胞分裂素的定量更加准确。经过对上述三种方法的相互验证实验表明，同时采用二种方法可以保证细胞分裂素分析的准确和可靠。 细胞分裂素可以促进黄瓜子叶的扩张。利用离体黄瓜子叶，分析BA诱发其扩张与子叶内源细胞分裂素之间的关系，实验证明，BA能促进玉米素及其核苷的迅速积累，进而诱发子叶的扩张。上述结果还表明，黄瓜子叶可能具有合成细胞分裂素的能力。 荸荠球茎是一种贮藏器官，但实验测定发现其中含有细胞分裂素的生理活性形式——异戊烯基腺嘌呤核苷(iPA)，而且合成它的前体腺嘌呤的含量也十分丰富，考虑到球茎与种子的类似之处，推测它可能做为合成细胞分裂素的一个源，而且其合成途径可能有别于植物其它组织。 农杆菌中的异戊烯基转移酶(ipt)基因是负责细胞分裂素生物合成的关键基因。将ipt基因克隆后对其启动子进行了改造，分别构建了如下三种基因：(1) ipt启动子+ipt编码区和3，区(ipt)，(2)磷酸核酮糖羧化酶小亚基启动子SSU 301+ipt编码区和3，区(SSU -ipt)，(3)豌豆种子特异性启动子viciln+ipt编码区和3，区(vic-ipt)。上述三种基因经农杆菌介导转化烟草，获得了16株再生植株，经Southern杂交证明其中15株的基因组上含有正常整合的ipt基因。Northern杂交表明有13株转基因烟草中的ipt基因能转录出大小正常的ipt mRNA并促进了细胞分裂素的生物合成。 实验表明，转基因烟草中ipt基因的表达受到多种因素的调控。首先启动子决定了ipt基因的表达模式，SSU -ipt基因的表达受光的诱导，黑暗中这种基因的转录完全停止，而vic-ipt基因的表达是种子特异性的，它不在烟草营养生长器官如根、茎、叶和愈伤组织中表达。第二，生长素能降低ipt基因的表达活性。第三，在整体植物的根中，存在某些反式因子，能够控制ipt基因的过量表达，这其中可能涉及到细胞内的蛋白因子、基因的甲基化作用及细胞分裂素的反馈调节等。 vic-ipt基因在烟草种子中的特异性表达导致种子内形成了一个细胞分裂素合成的源(source)。对种子中营养物质积累的研究表明，ipt基因的表达促进了种子干物质的积累，其中作用最明显的是增加种子内蛋白质的合成。转入vic-ipt基因后的烟草种子其萌发率没有显著变化，但幼苗的生长速率明显加快，这表明细胞分裂素能调节植株的生长。 通过Northern杂交检测转基因烟草中基因表达的调控，实验证明，ipt基因的表达明显抑制一组植物病理相关蛋白(PR)基因的转录活性，这组基因编码：几丁质酶，β-1，3一葡萄糖苷酶，伸展蛋白和渗调蛋白。对这些调控作用的生理学意义还有待进一步探索。 上述结果表明，在高等植物中，除了传统上认为根是合成细胞分裂素的部位之外，其它组织和器官也具有合成细胞分裂素的能力，其中合成能力最强的是一些离体组织和贮藏器官。农杆菌中的细胞分裂素生物合成基因(ipt)能够在高等植物的基因组中正常的整合和表达，并受到植物体内生理、发育等多种因素的调控，而与整体植物的正常生理过程协调一致。ipt基因的表达还能够调节植物体的生长和发育，包括种子发育时营养物质的积累、幼苗的生长和某些相关基因的表达。对上述问题的深入研究,必将促进细胞分裂素及其相关生理学和发育学研究的进展。

roIC基因和MT基因特性及其表达的研究

植物种子萌发、开花结实和衰老等一系列生长发育过程，都受到植物激素的影响。细胞分裂素作为重要的生长调节物质，对其传统生物化学和生理学特性的研究已积累子大量资料。随着分子生物学的发展，对植物激素的研究又进一步从单纯的生物学描述阶段深入到分子水平研究的阶段。尤其是近年来对来自病原微生物植物激素相关基因的研究，为揭示细胞分裂素的作用机理和细胸分裂素的水平调节机制的阐明开辟了新的途径。 根瘤农杆菌T-DNA上ipt、iaaM和iaaH基因和发根农杆菌的rol基因表达产物与植物激素的代谢有关。rolC基因是位于发根农杆菌T-DNA区的12号开放读框，编码细胞分裂素-β-葡萄糖苷酶，水解结合态细胞分裂素为自由态细胞分裂素。ipt基因编码异戊烯基转移酶，是细胞分裂素合成过程中的关键酶。 本文用PCR方法从发根农杆菌（Agrobacterium rhizogenes）1601质粒中扩增 rolC基因，并构建CaMV 35S启动子驱动下的双元表达载体。以农杆菌介导的叶盘法，分别对野生型烟草（Nicotiana tabacum L. cv. W38）和已转入异戊烯基转移酶基因（ipt）的3F1和3F2烟草进行转达化。Southern blot和Northern Dot Blot分析表明，rolC基因已导入烟草植株，并具有转录活性。转基因烟草的形态特征与细胞分裂素过量表达的植株表现出的特征一致。 用ELISA方法测定转基因烟草植株中激素的含量，结果显示，单独转rolC基因烟草和同时转入rolC和ipt两个基因的烟草，细胞分裂素的水平有不同程度的提高。转基因烟草表现多芽、节间缩短、叶色深绿等现象。同时，转基因烟草内部发生生理变化，如总自由氨基酸、脯氨酸在正常情况下较对照减少，气孔延迟关闭。在干旱胁迫下，转基因烟草随水势的降低、总自由氨基酸和脯氨酸的变化与对照不同。转基因烟草在开始干旱阶段较对照的总自由氨基酸和脯氨酸含量低，随着干旱胁迫的加深，植物中自由氨基酸的含量增加，但转基因植物自由氨基酸的含量高峰值出现时间较对照推迟。干旱胁迫48小时后，恢复给水，转基因植物较对照易恢复正常生长状态，表明转细胞分裂素基因植物抗旱能力增强。另外，叶片总蛋白SDS-PAGE电泳分析表明，转基因植物蛋白质含量高于对照，某些蛋白组分所占比例也明显提高。 综上所述，转rolC和ipt基因烟草的形态和生理变化，是细胞分裂素过量表达引起植物体内激素失衡的结果。

A Dorsal homolog (FcDorsal) in the Chinese shrimp Fenneropenaeus chinensis is responsive to both bacteria and WSSV challenge

Rel/NF kappa B is a family of transcription factors. In the present study, a Rel/NF kappa B family member, Dorsal homolog (FcDorsal) was cloned from the Chinese shrimp Fenneropenaeus chinensis. The full length cDNA of FcDorsal consists of 1627 bp, revealed a 1071 bp open reading frame encoding 357 aa. The predicted molecular weight (MW)of the deduced amino acid sequence of FcDorsal was 39.78 kDa, and its theoretical pl was 8.85. Amino acid sequence analysis showed that FcDorsal contains a Rel homolog domain (RHD) and an IPT/TIG (Ig-like, plexins and transcriptions factors) domain. The signature sequence of dorsal protein existed in the deduced amino acid sequence. Spatial expression profiles showed that FcDorsal had the highest expression level in the hemocytes and lymphoid organ (Oka). The expression profiles in the hemocytes and lymphoid organ were apparently modulated when shrimp were stimulated by bacteria or WSSV. Both Gram-positive (G(+)) bacteria (Micrococcus lysodeikticus) and Gram-negative (G(-)) bacteria (Vibrio anguillarium) injection to shrimp caused the up-regulation of FcDorsal at the transcription level. DsRNA approach was used to study the function of FcDorsal and the data showed that FcDorsal was related to the transcription of Penaeidin 5 in shrimp. The present data provide clues that FcDorsal might play potential important roles in the innate immunity of shrimp. Through comparison of the expression profiles between FcDorsal and another identified Rel/NF kappa B member (FcRelish) in shrimp responsive to WSSV challenge, we speculate that FcDorsal and FcRelish might play different roles in shrimp immunity. (C) 2010 Elsevier Ltd. All rights reserved.