Evaluation of an innovative critical power model in intermittent vertical jump

The aim of this study was to test if the critical power model can be used to determine the critical rest interval (CRI) between vertical jumps. Ten males performed intermittent countermovement jumps on a force platform with different resting periods (4.1 +/- 0.3 s, 5.0 +/- 0.4 s, 5.9 +/- 0.6 s). Jump trials were interrupted when participants could no longer maintain 95% of their maximal jump height. After interruption, number of jumps, total exercise duration and total external work were computed. Time to exhaustion (s) and total external work (J) were used to solve the equation Work = a + b . time. The CRI (corresponding to the shortest resting interval that allowed jump height to be maintained for a long time without fatigue) was determined dividing the average external work needed to jump at a fixed height (J) by b parameter (J/s). in the final session, participants jumped at their calculated CRI. A high coefficient of determination (0.995 +/- 0.007) and the CRI (7.5 +/- 1.6 s) were obtained. In addition, the longer the resting period, the greater the number of jumps (44 13, 71 28, 105 30, 169 53 jumps; p<0.0001), time to exhaustion (179 +/- 50, 351 +/- 120, 610 +/- 141, 1,282 +/- 417 s; p<0.0001) and total external work (28.0 +/- 8.3, 45.0 +/- 16.6, 67.6 +/- 17.8, 111.9 +/- 34.6 kJ; p<0.0001). Therefore, the critical power model may be an alternative approach to determine the CRI during intermittent vertical jumps.

Study of partially encased composite beams with innovative position of stud bolts

In this article, static behavior of three partially encased composite beams under flexural condition is investigated in the context of studying some alternative positions for the headed studs. Shear resistance between the I-shaped beam and the concrete was provided by headed studs in two positions: vertically welded oil the bottom flange and horizontally welded on the faces of the web. Experimental results show that the headed studs provide the composite action and increase the bending strength. The most remarkable position seems to be the headed studs vertically welded oil the bottom flange. Ail analytical method to estimate the bending capacity of the encased beams is also proposed, giving a good prediction of the experimental results (C) 2008 Elsevier Ltd. All rights reserved.

Development of innovative hybrid sandwich panel slabs: Experimental results

The authors appreciate the collaboration of the following labs: Civitest for developing DHCC materials, PIEP for conducting VARTM process (Eng. Luis Oliveira) and Department of Civil Engineering of Minho University to perform the tests (Mr. Antonio Matos and Eng. Marco Jorge).

Innovative methodologies for the enhancement of the flexural strengthening performance of NSM CFRP technique for RC beams

Tese de Doutoramento em Engenharia Civil

Innovation and absorptive capacity: What is the role of technological frontier?

This paper explores how absorptive capacity affects the innovative performance and productivity dynamics of Spanish firms. A firm’s efficiency levels are measured using two variables: the labour productivity and the Total Factor Productivity (TFP). The theoretical framework is based on the seminal contributions of Cohen and Levinthal (1989, 1990) regarding absorptive capacity; and the applied framework is based on the four-stage structural model proposed by Crépon, Duguet and Mairesse (1998) for setting the determinants of R&D, the effects of R&D activities on innovation outputs, and the impacts of innovation on firm productivity. The present study uses a twostage structural model. In the first stage, a probit estimation is used to investigate how the sources of R&D, the absorptive capacity and a vector of the firm’s individual features influence the firm’s likelihood of developing innovations in products or processes. In the second phase, a quantile regression is used to analyze the effect of R&D sources, absorptive capacity and firm characteristics on productivity. This method shows the elasticity of each exogenous variable on productivity according to the firms’ levels of efficiency, and thus allows us to distinguish between firms that are close to the technological frontier and those that are further away from it. We used extensive firm-level panel data from 5,575 firms for the 2004-2009 period. The results show that the internal absorptive capacity has a strong impact on the productivity of firms, whereas the role of external absorptive capacity differs according to nature of the each industry and according the distance of firms from the technological frontier. Key words: R&D sources, innovation strategies, absorptive capacity, technological distance, quantile regression.

Young innovative firms and R&D strategies: is the Spanish case different?

This paper analyzes the profile of Spanish young innovative companies (YICs) and the determinants of innovation and imitation strategies. The results for an extensive sample of 2,221 Spanish firms studied during the period 2004–2010 show that YICs are found in all sectors, although they are more concentrated in high-tech sectors and, in particular, in knowledge-intensive services (KIS). Three of every four YICs are involved in KIS. Our results highlight that financial and knowledge barriers have much impact on the capacity of young, small firms to innovate and to become YICs, whereas market barriers are not obstacles to becoming a YIC. Public funding, in particular from the European Union, makes it easier for a new firm to become a YIC. In addition, YICs are more likely to innovate than mature firms, although they are more susceptible to sectoral and territorial factors. YICs make more dynamic use of innovation and imitation strategies when they operate in high-tech industries and are based in science parks located close to universities. Keywords: innovation strategies, public innovation policies, barriers to innovation, multinomial probit model. JEL Codes: D01, D22 , L60, L80, O31

Does absorptive capacity determine collaborative research returns to innovation? A geographical dimension

This paper aims to estimate the impact of research collaboration with partners in different geographical areas on innovative performance. By using the Spanish Technological Innovation Panel, this study provides evidence that the benefits of research collaboration differ across different dimensions of the geography. We find that the impact of extra-European cooperation on innovation performance is larger than that of national and European cooperation, indicating that firms tend to benefit more from interaction with international partners as a way to access new technologies or specialized and novel knowledge that they are unable to find locally. We also find evidence of the positive role played by absorptive capacity, concluding that it implies a higher premium on the innovation returns to cooperation in the international case and mainly in the European one.

Institutional capacity and implementation issues in farmers' rights

Armed with the ‘equity’ and ‘conservation’ arguments that have a deep resonance with farming communities, developing countries are crafting a range of measures designed to protect farmers’ access to innovations, reward their contributions to the conservation and enhancement of plant genetic resources and provide incentives for sustained on-farm conservation. These measures range from the commericialization of farmers’ varieties to the conferment of a set of legally enforceable rights on farming communities – the exercise of which is expected to provide economic rewards to those responsible for on-farm conservation and innovation. The rights-based approach has been the cornerstone of legislative provision for implementing farmers’ rights in most developing countries. In drawing up these measures, developing countries do not appear to have systematically examined or provided for the substantial institutional capacity required for the effective implementation of farmers’ rights provisions. The lack of institutional capacity threatens to undermine any prospect of serious implementation of these provisions. More importantly, the expectation that significant incentives for on-farm conservation and innovation will flow from these ‘rights’ may be based on a flawed understanding of the economics of intellectual property rights. While farmers’ rights may provide only limited rewards for conservation, they may still have the effect of diluting the incentives for innovative institutional breeding programs – with the private sector increasingly relying on non-IPR instruments to profit from innovation. The focus on a rights-based approach may also draw attention away from alternative stewardship-based approaches to the realization of farmers’ rights objectives.

Technological capacity-building in unstable settings: Manufacturing firms in Argentina and Brazil

From the 1970s onward, the macroeconomic context in Argentina and Brazil was characterized by drastic economic changes and instability. Numerous studies have documented the generally negative effect of this environment on the innovation capacities of the manufacturing sector. This paper, however, analyses the possible emergence of new innovation capacities in the period, bringing two important phenomena to light. First, a quite substantial number of firms, even in unstable settings, redoubled their innovation efforts. Second, these firms are mainly found in a small group of sectors associated with the countries’ static advantages or in sectors favoured by specific sectoral regimes. The findings, although exploratory, are a contribution to the debate on the development of innovative capacities in unstable macroeconomic contexts and the ability of sectors associated with the two countries’ static advantages to generate spaces of innovation and value creation.

DengueTools: innovative tools and strategies for the surveillance and control of dengue

Dengue fever is a mosquito-borne viral disease estimated to cause about 230 million infections worldwide every year, of which 25,000 are fatal. Global incidence has risen rapidly in recent decades with some 3.6 billion people, over half of the world's population, now at risk, mainly in urban centres of the tropics and subtropics. Demographic and societal changes, in particular urbanization, globalization, and increased international travel, are major contributors to the rise in incidence and geographic expansion of dengue infections. Major research gaps continue to hamper the control of dengue. The European Commission launched a call under the 7th Framework Programme with the title of 'Comprehensive control of Dengue fever under changing climatic conditions'. Fourteen partners from several countries in Europe, Asia, and South America formed a consortium named 'DengueTools' to respond to the call to achieve better diagnosis, surveillance, prevention, and predictive models and improve our understanding of the spread of dengue to previously uninfected regions (including Europe) in the context of globalization and climate change. The consortium comprises 12 work packages to address a set of research questions in three areas: Research area 1: Develop a comprehensive early warning and surveillance system that has predictive capability for epidemic dengue and benefits from novel tools for laboratory diagnosis and vector monitoring. Research area 2: Develop novel strategies to prevent dengue in children. Research area 3: Understand and predict the risk of global spread of dengue, in particular the risk of introduction and establishment in Europe, within the context of parameters of vectorial capacity, global mobility, and climate change. In this paper, we report on the rationale and specific study objectives of 'DengueTools'. DengueTools is funded under the Health theme of the Seventh Framework Programme of the European Community, Grant Agreement Number: 282589 Dengue Tools.

Innovative techniques for sport turf managing: Agronomic and phyisiological implications

The growing substrate of the putting greens is considered a key factor for a healthy turf ecosystem. Actually detailed study on the effects of growth promoting bacteria and biostimulants on a professional sport turf are very limited. This thesis aimed to study the effectiveness of different microorganisms and biostimulants in order to improve the knowledge relative to the relationship between the beneficial microflora and root apparatus of sport turfs. The research project was divided in three principal steps: Initially, commercial products based on biostimulants and microorganisms were tested on a Lolium perenne L. essence grown in a controlled-environment. The principal evaluations were the study of the habitus of plants, biomass production and length of leaves and roots. Were studied the capacity of colonization of microorganisms within root tissues and rhizosphere. In the second step were developed two different biostimulant solutions based on effective microorganisms, mycorrhizae and humic acids. This test was conducted both on an Agrostis stolonifera putting green (Modena Golf & Country Club) in a semi-field condition and within a growth chamber on a Lolium perenne L. essence. Fungicide and chemicals applications were suspended in order to assess the effectiveness of the inoculants for nutrition and control of pests. In the last step, different microorganism mixes and biostimulants were tested on an experimental putting green in the Turf Research Center (TRC) (Virginia Tech, United States) in a real managing situation. The effects of different treatments were studied maintaining all chemicals and mechanicals managements scheduled during a sport season. Both growth-chamber and field results confirmed the capacity of microorganisms based biostimulants to promote the physiologic conditions of the plants, improve the growth of the roots and enhance the aesthetic performance of the turf. Molecular analysis confirmed the capacity of microorganisms to colonize the root tissues.

Innovative Man Machine Interfaces In Aeronautics

The research activity focused on the study, design and evaluation of innovative human-machine interfaces based on virtual three-dimensional environments. It is based on the brain electrical activities recorded in real time through the electrical impulses emitted by the brain waves of the user. The achieved target is to identify and sort in real time the different brain states and adapt the interface and/or stimuli to the corresponding emotional state of the user. The setup of an experimental facility based on an innovative experimental methodology for “man in the loop" simulation was established. It allowed involving during pilot training in virtually simulated flights, both pilot and flight examiner, in order to compare the subjective evaluations of this latter to the objective measurements of the brain activity of the pilot. This was done recording all the relevant information versus a time-line. Different combinations of emotional intensities obtained, led to an evaluation of the current situational awareness of the user. These results have a great implication in the current training methodology of the pilots, and its use could be extended as a tool that can improve the evaluation of a pilot/crew performance in interacting with the aircraft when performing tasks and procedures, especially in critical situations. This research also resulted in the design of an interface that adapts the control of the machine to the situation awareness of the user. The new concept worked on, aimed at improving the efficiency between a user and the interface, and gaining capacity by reducing the user’s workload and hence improving the system overall safety. This innovative research combining emotions measured through electroencephalography resulted in a human-machine interface that would have three aeronautical related applications: • An evaluation tool during the pilot training; • An input for cockpit environment; • An adaptation tool of the cockpit automation.

18F-RB390: innovative ligand for imaging the T877A androgen receptor mutant in prostate cancer via positron emission tomography (PET).

BACKGROUND Detecting prostate cancer before spreading or predicting a favorable therapy are challenging issues for impacting patient's survival. Presently, 2-[(18) F]-fluoro-2-deoxy-D-glucose ((18) F-FDG) and/or (18) F-fluorocholine ((18) F-FCH) are the generally used PET-tracers in oncology yet do not emphasize the T877A androgen receptor (AR) mutation being exclusively present in cancerous tissue and escaping androgen deprivation treatment. METHODS We designed and synthesized fluorinated 5α-dihydrotestosterone (DHT) derivatives to target T877A-AR. We performed binding assays to select suitable candidates using COS-7 cells transfected with wild-type or T877A AR (WT-AR, T877A-AR) expressing plasmids and investigated cellular uptake of candidate (18) F-RB390. Stability, biodistribution analyses and PET-Imaging were assessed by injecting (18) F-RB390 (10MBq), with and without co-injection of an excess of unlabeled DHT in C4-2 and PC-3 tumor bearing male SCID mice (n = 12). RESULTS RB390 presented a higher relative binding affinity (RBA) (28.1%, IC50  = 32 nM) for T877A-AR than for WT-AR (1.7%, IC50  = 357 nM) related to DHT (RBA = 100%). A small fraction of (18) F-RB390 was metabolized when incubated with murine liver homogenate or human blood for 3 hr. The metabolite of RB390, 3-hydroxysteroid RB448, presented similar binding characteristics as RB390. (18) F-RB390 but not (18) F-FDG or (18) F-FCH accumulated 2.5× more in COS-7 cells transfected with pSG5AR-T877A than with control plasmid. Accumulation was reduced with an excess of DHT. PET/CT imaging and biodistribution studies revealed a significantly higher uptake of (18) F-RB390 in T877A mutation positive xenografts compared to PC-3 control tumors. This effect was blunted with DHT. CONCLUSION Given the differential binding capacity and the favorable radioactivity pattern, (18) F-RB390 represents the portrayal of the first imaging ligand with predictive potential for mutant T877A-AR in prostate cancer for guiding therapy. Prostate 75:348-359, 2015. © 2014 Wiley Periodicals, Inc.

Development of multidisciplinary workshops between different subjects as an innovative teaching methodology for the acquisition of professional skills of the future architect

The implantation of the new Architecture Degree and the important normative changes in the building sector imply the need to use new teaching methodologies that enhance skills and competences in order to response to the increasing requirements demanded by society to the future architect. The aim of this paper is to present, analyze and discuss the development of multidisciplinary workshops as a new teaching methodology used in several Construction subjects of the Architecture Degree in the University of Alicante. Workshops conceived with the aim to synthesize and complement the technical knowledge acquired by the students during the Degree and to enhance the skills and competencies necessary for the professional practice. With that purpose, we decided to experiment on current subjects of the degree during this academic year, by applying the requirements defined in the future Architecture Degree in a practical way, through workshops between different subjects, superposing the technical knowledge with the resolution of constructive problems in the development of an architectural project. Developing these workshops between subjects we can dissolve the traditional boundaries between different areas of the Degree. This multidisciplinary workshop methodology allows the use of all the global knowledge acquired by students during their studies and at the same time, it enhances students’ ability to communicate and discuss their ideas and solutions in public. It also increases their capacity of self-criticism, and it foments their ability to undertake learning strategies and research in an autonomous way. The used methodology is based on the development of a practical work common to several subjects of different knowledge areas within the "Technology Block" of the future Architecture Degree. Thus, students work approaching the problem in a global way discussing simultaneously with teachers from different areas. By using these new workshops we stimulate an interactive class versus a traditional lecture. Work is evaluated continuously, valuing the participative pupil´s attitude, working in groups in class time, reaching weekly objectives and stimulating the individual responsibility and positive interdependence of the pupil inside the working group. The exercises are designed to improve students’ ability to transmit their ideas and solutions in public, knowing how to discuss and defend their technical resolutions to peers and teachers (Peer Reviewing), their capacity for self-criticism and their capacity to undertake strategies and autonomous learning processes at the same time they develop a personal research into new technologies, systems and materials. Students have shown their majority preference for this teaching methodology by the multidisciplinary workshops offered in the last years, with very satisfactory academic results. In conclusion, it can be verified nowadays the viability of the introduction of new contents and new teaching methodologies necessary for the acquisition of the skills in the future Architecture Degree, through workshops between several subjects that have had a great acceptance in students and positive contrasted academic results.

Measuring firm innovativeness: towards a composite innovation index built on firm innovative posture, propensity and performance attributes. ACES Working Paper No. 12, 2008

The ability to innovate is generally accepted as a critical success factor to growth and future performance of firms. Yet, this acceptance obscures a comprehensive perspective on how firms can influence their innovation capacity and resulting performance. This paper proposes a '3P' construct of innovation measurement that simultaneously considers the Posture, Propensity and Performance related to a firm's innovation capabilities. We propose and provide empirical support showing that robust measurement of the performance implications of innovation requires the consideration of input, throughput and output factors simultaneously. Single or more limited indicators do not offer the degree of fine-tuning to a firm's innovation system that managers require. Thus, we propose the development, and future research into contingent variations, of a Composite Innovation Index (CII). We further demonstrate its use in comparing innovators and allowing managers to design a firm's innovation system.