977 resultados para inibidor de desenvolvimento de insetos


Relevância:

30.00% 30.00%

Publicador:

Resumo:

The main problem on the exploration activity on petroleum industry is the formation water resulted on the fields producing. The aggravating of this problem is correlated with the advancing technologies used on the petroleum extractions and on its secondary approach objecting the reobtainment of this oil. Among the main contaminants of the water formation are corrosives gases such as: O2, CO2 and H2S, some solids in suspension and dissolved salts. Concerning to those gases the CO2 is the one that produce significant damage for carbon steel on corrosion process of the petroleum and gas industries. Corrosion inhibitors for carbon steel in formation water is one of the most used agents in control of those damages. In this context, the poor investigations of carbon steel corrosion proceeding from solids in suspension is an opened field for studies. On this work the inhibitor effect of the commercial CORRTREAT 703 was evaluated on some specific solids in suspension at saline medium containing 10.000 ppm of de-aerated chloride using CO2 until non oxygen atmosphere been present. For that, quartz, calcium carbonate, magnetite and iron sulphide were subjected to this investigation as the selected solids. The effect of this inhibitor on corrosion process correlated with those specific solids, was measured using electrochemical (resistance of linear polarization and galvanic pair) and gravimetrical techniques. During all the experimental work important parameters were monitored such as: pH, dissolved oxygen, temperature, instantaneous corrosion rate and galvanic current. According to the obtained results it was proved that the suspension solids calcium carbonate and iron sulphide decrease the corrosion process in higher pH medium. Meanwhile the quartz and magnetite been hardness increase corrosion by broking of the passive layer for erosion. In the other hand, the tested inhibitor in concentration of 50 ppm, showed to be effective (91%) in this corrosion process

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Actually in the oil industry biotechnological approaches represent a challenge. In that, attention to metal structures affected by electrochemical corrosive processes, as well as by the interference of microorganisms (biocorrosion) which affect the kinetics of the environment / metal interface. Regarding to economical and environmental impacts reduction let to the use of natural products as an alternative to toxic synthetic inhibitors. This study aims the employment of green chemistry by evaluating the stem bark extracts (EHC, hydroalcoholic extract) and leaves (ECF, chloroform extract) of plant species Croton cajucara Benth as a corrosion inhibitor. In addition the effectiveness of corrosion inhibition of bioactive trans-clerodane dehydrocrotonin (DCTN) isolated from the stem bark of this Croton was also evaluated. For this purpose, carbon steel AISI 1020 was immersed in saline media (3,5 % NaCl) in the presence and absence of a microorganism recovered from a pipeline oil sample. Corrosion inhibition efficiency and its mechanisms were investigated by linear sweep voltammetry and electrochemical impedance. Culture-dependent and molecular biology techniques were used to characterize and identify bacterial species present in oil samples. The tested natural products EHC, ECF and DCTN (DMSO as solvent) in abiotic environment presented respectively, corrosion inhibition efficiencies of 57.6% (500 ppm), 86.1% (500 ppm) and 54.5% (62.5 ppm). Adsorption phenomena showed that EHC best fit Frumkin isotherm and ECF to Temkin isotherm. EHC extract (250 ppm) dissolved in a polar microemulsion system (MES-EHC) showed significant maximum inhibition efficiency (93.8%) fitting Langmuir isotherm. In the presence of the isolated Pseudomonas sp, EHC and ECF were able to form eco-compatible organic films with anti-corrosive properties

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Magnetic targeting is being investigated as a means of local delivery of drugs, combining precision, minimal surgical intervention, and satisfactory concentration of the drug in the target region. In view of these advantages, it is a promising strategy for improving the pharmacological response. Magnetic particles are attracted by a magnetic field gradient, and drugs bound to them can be driven to their site of action by means of the selective application of magnetic field on the desired area. Helicobacter pylori is the commonest chronic bacterial infection. The treatment of choice has commonly been based upon a triple therapy combining two antibiotics and an anti-secretory agent. Furthermore, an extended-release profile is of utmost importance for these formulations. The aim of this work was to develop a magnetic system containing the antibiotic amoxicillin for oral magnetic drug targeting. First, magnetic particles were produced by coprecipitation of iron salts in alkaline medium. The second step was coating the particles and amoxicillin with Eudragit® S-100 by spray-drying technique. The system obtained demonstrated through the characterization studies carried out a possible oral drug delivery system, consisting in magnetite microparticles and amoxicillin, coated with a polymer acid resistant. This system can be used to deliver drugs to the stomach for treatment of infections in this organ. Another important finding in this work is that it opens new prospects to coat magnetic microparticles by the technique of spray-drying.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

A bactéria Bacillus thuringiensis Berliner produz um corpo de inclusão paraesporal (cristal) de natureza proteica, formado durante a esporulação, que atua de forma eficiente no controle de insetos-praga de culturas economicamente importantes. Esse cristal é constituído de proteínas Cry, que são codificadas pelos genes cry; um isolado pode ser caracterizado pelo conteúdo de genes cry que apresenta. Visando caracterizar novos isolados no combate de insetos-praga pertencentes às ordens Lepidoptera e Coleoptera, 76 isolados bacterianos foram analisados molecularmente e tiveram seu potencial de controle avaliado por meio de bioensaios com larvas de Spodoptera frugiperda (J.E. Smith), Sphenophorus levis Vaurie e Tenebrio molitor Linnaeus. As análises moleculares indicaram 11 isolados (14,5% da coleção), contendo genes lepidóptero-específicos e 17 (22,37%) com genes coleóptero-específicos. As análises de patogenicidade revelaram dois isolados com alto potencial de controle para lagartas de S. frugiperda, um para larvas de S. levis e seis prejudiciais ao desenvolvimento das larvas de T. molitor. Esses isolados de B. thuringiensis podem ser promissores no controle biológico das referidas pragas.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Avaliou-se o período pós-embrionário do predador Chrysoperla defreitasi Brooks alimentada com ovos de Sitotroga cerealella (Olivier) e Diatraea saccharalis (Fabricius) em condições de laboratório à temperatura de 25±2ºC, UR de 70±10% e fotofase de 14h. Os ovos do crisopídeo foram individualizados em tubos de vidro e, após a eclosão, as larvas foram alimentadas com as respectivas presas e mantidas em sala climatizada, sob condições controladas. O delineamento estatístico utilizado foi inteiramente casualizado com 150 repetições para cada dieta. As durações do 1º, 2º e 3º ínstar e da fase pupal foram, respectivamente, 3,4, 2,7, 3,5 e 11,9 dias para larvas alimentadas com D. saccharalis e 3,6, 2,8, 2,7 e 9,3 dias, quando a dieta oferecida foi ovos de S. cerealella. Larvas de crisopídeos alimentados com ovos de D. saccharalis levaram em média 21,5 dias para completar o desenvolvimento pós-embrionário, com 34,0% de adultos emergidos, enquanto que os alimentados com ovos de S. cerealella levaram 18,4 dias com 55,3% de adultos. Pode-se, pois, constatar que a melhor dieta para o desenvolvimento pós-embrionário de C. defreitasi foram os ovos de S. cerealella, sendo que insetos alimentados com esta dieta apresentaram período mais curto de desenvolvimento, maior viabilidade nos três ínstares larvais e no período pupal, produzindo maior número de adultos.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Use of natural fibres as a reinforcement material in the manufacture of composites show a series of advantages: availability, biodegradability, low weight and regeneration in relation to synthetic fibres, thus justifying its utilization. In the present research work, composites were developed with chicken feathers (KF), using unsaturated polyester resin as matrix, for diversified applications, mainly in the furniture/timber industry.At present, in Brazil the chicken feathers are used as part of the animal feed, even though this material possesses low aggregated value. The chicken feathers are hollow, light and resistant. After washing with water at room temperature, a part of the chicken feathers were treated with 2% NaOH. Composites were manufactured using treated and untreated chicken feathers with unsaturated orthothalic polyester resin and 1% peroxide as catalyser, obtained in the commerce. Samples with size 150x25x3 mm for mechanical tests were cut by laser in the composite plate. Mechanical analyses were carried out in the Laboratório de Metais e Ensaios Mecânicos UFRN. All the analyses were in accordance with ASTM standards. SEM analyses were also carried out on the samples.In the analyses of the results obtained, it was observed that the composites made with untreated chicken feathers showed better results (Traction 11.406 MPa and 9.107 MPa Bending 34.947 and 20.918 MPa for samples with and without treatment respectively) compared to the composite with treated feathers. Very low values of the water absorption results, evidenced the impermeability characteristic of the feathers. From the SEM images, the structure, fracture and the fibre/matrix adsorption can be evidenced. In the flammability test, it was observed that despite the feathers having sulfur as a constituent, natural inhibitor of flame, no burning support of the composites, because the manufacturing process of the composite

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Nowadays, the use of chemicals that satisfactorily meet the needs of different sectors of the chemical industry is linked to the consumption of biodegradable materials. In this context, this work contemplated biotechnological aspects with the objective of developing a more environmentally-friendly corrosion inhibitor. In order to achieve this goal, nanoemulsion-type systems (NE) were obtained by varying the amount of Tween 80 (9 to 85 ppm) a sortitan surfactant named polyoxyethylene (20) monooleate. This NE-system was analyzed using phase diagrams in which the percentage of the oil phase (commercial soybean oil, codenamed as OS) was kept constant. By changing the amount of Tween 80, several polar NE-OS derived systems (O/W-type nanoemulsion) were obtained and characterized through light scattering, conductivity and pH, and further subjected to electrochemical studies. The interfacial behavior of these NE-OS derived systems (codenamed NE-OS1, S2, S3, S4 and S5) as corrosion inhibitors on carbon steel AISI 1020 in saline media (NaCl 3.5%) were evaluated by measurement of Open Circuit Potential (OCP), Polarization Curves (Tafel extrapolation method) and Electrochemical Impedance Spectroscopy (EIS). The analyzed NE-OS1 and NE-OS2 systems were found to be mixed inhibitors with quantitative efficacy (98.6% - 99.7%) for concentrations of Tween 80 ranging between 9 and 85 ppm. According to the EIS technique, maximum corrosion efficiency was observed for some tested NE-OS samples. Additionaly to the electrochemical studies, Analysis of Variance (ANOVA) and Principal Component Analysis (PCA) were used, characterization of the nanoemulsion tested systems and adsorption studies, respectively, which confirmed the results observed in the experimental analyses using diluted NE-OS samples in lower concentrations of Tween 80 (0.5 1.75 ppm)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This study started from the hypothesis of the existence of a relation between the type of the urban occupation concerning to the sustainability conditions at the proximity of Environment Protected Zones and the occurrence of vectors insects in Natal, Rio Grande do Norte, Brazil. This research, which used data available by the City Administration Health and Urbanization Secretaries (respectively SMS and SEMURB), in the time period of 2006 to 2008, aimed to characterize the study site in terms of urban occupation, relating it to social environmental aspects of land occupation and the occurrence of vectors insects. This study is presented in two papers, the first one linking the occurrence of vectors insects and sustainable development indicators and the second relating the incidence of reported cases of Dengue and Dengue Hemorrhagic Fever (DHF) and the occurrence of larvae infection indexes of Aedes aegypti, in Natal, Rio Grande do Norte State. In the first paper, was made a correlation between Dengue Fever vectors and Visceral and Tegumentar Leishmaniasis vectors and sustainable development indicators, selected from IDS Brasil- 2008. Through factorial analysis a Sustainability Index (SI) was acquired for each region, the northern region of the municipality obtained lower numbers than southern region, which, in its turn, presented better sustainability conditions. Linking this index to vector infestation parameters shows a high significant correlation between the SI and the Breteau Index of Aedes aegypti (p=0,028) as well as with SI and sand flies infestation index (p=0,01). Higher rates in vectors infestation in regions with a lower Sustainable Development Index demonstrates that this index can be used to determine the increasing of probability of Aedes and sand flies occurrence in urban environment. The second paper analyzed the occurrence of the main vector of Dengue and DHF, the Aedes aegypti mosquito, and the relation between larvae infection indexes of this insect and reported cases of the diseases. This study revealed unexpected relation where areas with higher Breteau s Indexes showed lower infection rates of Dengue Fever, although showing high incidence of DHF

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Estudos sobre as mais diversas formas de controle de pragas e utilização de inimigos naturais, exigem artrópodes em quantidade e qualidade. Mediante essa necessidade, o processo de criação e multiplicação de artrópodes, vem ao longo dos anos, passando por significativas transformações. As técnicas de criação e multiplicação de insetos são muito importantes em estudos de biologia e de métodos de controle. A criação e definição de uma metodologia para multiplicação tem sido um grande desafio nos estudos da biologia e da criação de insetos, principalmente, devido a dificuldade de estabelecimento de populações em casa de vegetação e campo. Visando otimizar e adequar uma metodologia de multiplicação de Aphis gossypii (Hemiptera: Aphididae) em condições de laboratório, foi estabelecida uma colônia sobre plantas de algodoeiro (Gossypium hirsutum L. raça Latifolium Hutch) objetivando uma melhoria nas condições de sobrevivência e multiplicação desses insetos, menores influencias dos fatores abióticos, e a potencialização do uso das plantas por um período mais longo. Com o desenvolvimento dessa técnica e dos recursos utilizados na criação, notou-se um incremento na quantidade de indivíduos obtidos, melhor aproveitamento das plantas e diminuição de custos. Dessa forma evitou-se também a migração e infestação de outras espécies de pulgões e a ação de inimigos naturais. Após o estabelecimento da criação, verificou-se que o controle do parasitismo de A. gossypii foi de acordo com as condiçõ es submetida.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Darunavir is a protease inhibitor used in the treatment of HIV infection. It is a pillar of the drug cocktail for patients diagnosed with the virus. Quality control in the pharmaceutical industry, to verify the content of active substance and study the physicochemical characteristics of the drug, is essential to ensure final product quality. Until now, standardized methods for the analysis of darunavir have not been available in official compendia. This justifies new research, to develop and validate analytical methods, as well as physicochemical and pharmaceutical analysis for this drug, both as a raw material and a finished product. Thus, in this study, (a) the average weight of darunavir tablets and (b) the melting point of the pure drug were determined, and the following analytical techniques were performed: (c) thin-layer chromatography, (d) ultraviolet spectroscopy, (e) infrared spectroscopy and (f) high performance liquid chromatography. By developing the above techniques, it is possible to make a qualitative assessment of the quality of darunavir tablets.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)