Fate of nitrogen in bioreactor landfills: lab-scale in situ aeration in well decomposed MSW

Dissertação para obtenção do Grau de Mestre em Engenharia do ambiente, perfil de engenharia sanitária

One-step in situ synthesis of polyamide microcapsules with inorganic payload and their transformation into responsive thermoplastic composite materials

Well-dispersed loads of finely powdered metals, metal oxides, several carbon allotropes or nanoclays are incorporated into highly porous polyamide 6 microcapsules in controllable amounts via an original one-step in situ fabrication technique. It is based on activated anionic polymerization (AAP) of ε-caprolactam in a hydrocarbon solvent performed in the presence of the respective micro- or nanosized loads. The forming microcapsules with typical diameters of 25-50 µm entrap up to 40 wt% of load. Their melt processing produces hybrid thermoplastic composites. Mechanical, electric conductivity and magnetic response measurements show that transforming of in situ loaded microcapsules into composites by melt processing (MP) is a facile and rapid method to fabricate materials with high mechanical resistance and electro-magnetic characteristics sufficient for many industrial applications. This novel concept requires low polymerization temperatures, no functionalization or compatibilization of the loads and it is easy to scale up at industrial production levels.

Discrimination of bacteriophage infected cells using locked nucleic acid fluorescent in situ hybridization (LNA-FISH)

Bacteriophage-host interaction studies in biofilm structures are still challenging due to the technical limitations of traditional methods. The aim of this study was to provide a direct fluorescence in situ hybridization (FISH) method based on locked nucleic acid (LNA) probes, which targets the phage replication phase, allowing the study of population dynamics during infection. Bacteriophages specific for two biofilm-forming bacteria, Pseudomonas aeruginosa and Acinetobacter, were selected. Four LNA probes were designed and optimized for phage-specific detection and for bacterial counterstaining. To validate the method, LNA-FISH counts were compared with the traditional plaque forming unit (PFU) technique. To visualize the progression of phage infection within a biofilm, colony-biofilms were formed and infected with bacteriophages. A good correlation (r=0.707) was observed between LNA-FISH and PFU techniques. In biofilm structures, LNA-FISH provided a good discrimination of the infected cells and also allowed the assessment of the spatial distribution of infected and non-infected populations.

Optimization of peptide nucleic acid fluorescence in situ hybridization (PNA-FISH) for the detection of bacteria: the effect of pH, dextran sulfate and probe concentration

Fluorescence in situ hybridization (FISH) is a molecular technique widely used for the detection and characterization of microbial populations. FISH is affected by a wide variety of abiotic and biotic variables and the way they interact with each other. This is translated into a wide variability of FISH procedures found in the literature. The aim of this work is to systematically study the effects of pH, dextran sulfate and probe concentration in the FISH protocol, using a general peptide nucleic acid (PNA) probe for the Eubacteria domain. For this, response surface methodology was used to optimize these 3 PNA-FISH parameters for Gram-negative (Escherichia coli and Pseudomonas fluorescens) and Gram-positive species (Listeria innocua, Staphylococcus epidermidis and Bacillus cereus). The obtained results show that a probe concentration higher than 300 nM is favorable for both groups. Interestingly, a clear distinction between the two groups regarding the optimal pH and dextran sulfate concentration was found: a high pH (approx. 10), combined with lower dextran sulfate concentration (approx. 2% [w/v]) for Gram-negative species and near-neutral pH (approx. 8), together with higher dextran sulfate concentrations (approx. 10% [w/v]) for Gram-positive species. This behavior seems to result from an interplay between pH and dextran sulfate and their ability to influence probe concentration and diffusion towards the rRNA target. This study shows that, for an optimum hybridization protocol, dextran sulfate and pH should be adjusted according to the target bacteria.

Human papillomavirus detection in genital lesions by in situ hybridization and ultrastructural observations

Detection of papillomavirus DNA in sity hybridization technique was perfomed in 29 symptomatic patients (6 males and 23 females) during the period of 1989-1991 at the Clinic for Sexually Transmitted Diseases, Universidade Federal Fluminense, State of rio de Janeiro. All the male patients had condyloma acuminata. Only HPV 6/11 were found in these lesions. Clinical features inthe female patients included vulvar condyloma acuminata, bowenoid populosis, flat cervical condyloma, cervical condyloma acuminatum and cervical intraepithelialneoplasia grade II (CIN II). We also found cases of condyloma acuminata associated to vulvar intraepithelial neoplasia grade III (VIN III), as well as to vaginal invasive carcinoma. HPV 6/11 and 16/18 were found in vulvar condyloma acuminata. Mixed infection by 6/11-16/18 HPV were also seen in these lesions as well as in the patient who had cervical condyloma acuminatum. HPV 16/18 were found in the condyloma acuminatum plus VIN III and in the CIN II lesions. We have found HPV31/33/51 in the specimen of condyloma acuminatum plus invasive carcinoma. In order to investigate the ultrastructural aspects of HPV infection in genital tissue, the biopsies of three female patients were observed under electron microscope.Mature virus particles were found in the cells of a condyloma acuminatum as wellas in the condyloma acuminatum plus invasive carcinoma case. In another sample, chromosome breakages were found in the nuclei of the infected cells although no viral particles were observed.

Detection of Trypanosoma cruzi DNA within murine cardiac tissue sections by in situ polymerase chain reaction

The use of in situ techniques to detect DNA and RNA sequences has proven to be an invaluable technique with paraffin-embedded tissue. Advances in non-radioactive detection systems have further made these procedures shorter and safer. We report the detection of Trypanosoma cruzi, the causative agent of Chagas disease, via indirect and direct in situ polymerace chain reaction within paraffin-embedded murine cardiac tissue sections. The presence of three T. cruzi specific DNA sequences were evaluated: a 122 base pair (bp) sequence localized within the minicircle network, a 188 bp satellite nuclear repetitive sequence and a 177 bp sequence that codes for a flagellar protein. In situ hybridization alone was sensitive enough to detect all three T. cruzi specific DNA sequences.

Local moderate magnetically induced hyperthermia using an implant formed in situ in a mouse tumor model.

Purpose: We investigate a new heat delivery technique for the local treatment of solid tumors. The technique involves injecting a formulation that solidifies to form an implant in situ. This implant entraps superparamagnetic iron oxide nanoparticles (SPIONs) embedded in silica microbeads for magnetically induced moderate hyperthermia. Particle entrapment prevents phagocytosis and distant migration of SPIONs. The implant can be repeatedly heated by magnetic induction. Methods: We evaluated heating and treatment efficacies by means of thermometry and survival studies in nude mice carrying subcutaneous human colocarcinomas. At day 1, we injected the formulation into the tumor. At day 2, a single 20-min hyperthermia treatment was delivered by 141-kHz magnetic induction using field strengths of 9 to 12 mT under thermometry. Results: SPIONs embedded in silica microbeads were effectively confined within the implant at the injection site. Heat-induced necro-apoptosis was assessed by histology on day 3. On average, 12 mT resulted in tumor temperature of 47.8 degrees C, and over 70% tumor necrosis that correlated to the heat dose (AUC = 282 degrees C.min). In contrast, a 9-mT field strength induced tumoral temperature of 40 degrees C (AUC = 131 degrees C.min) without morphologically identifiable necrosis. Survival after treatment with 10.5 or 12 mT fields was significantly improved compared to non-implanted and implanted controls. Median survival times were 27 and 37 days versus 12 and 21 days respectively. Conclusion: Five of eleven mice (45%) of the 12 mT group survived one year without any tumor recurrence, holding promise for tumor therapy using magnetically induced moderate hyperthermia through injectable implants.

In situ hybridization of hepatitis C virus RNA in liver cells of an experimentally infected rhesus macaque

The liver tissue of a rhesus macaque inoculated with hepatitis C virus (HCV) has been analyzed for the presence of HCV RNA using the technique of in situ hybridization, both at light and electron microscopy levels. The animal was inoculated by the intrasplenic route using a HCV infected autogenic hepatocyte transplant. The serum sample used to infect the hepatocyte cells was characterized by polymerase chain reaction technique and shown to be positive for HCV RNA, genotype 3 with 10(7) RNA copies/ml. In situ hybridization was performed using a complementary negative strand probe made with the specific primer. We were able to detect and localize viral RNA in altered membranes of the rough endoplasmic reticulum of infected liver cells, showing evidence of virus replication in vivo.

Fingermark detection based on the in situ growth of luminescent nanoparticles: towards a new generation of multimetal deposition

The in situ deposition of zinc oxide on gold nanoparticles in aqueous solution has been here successfully applied in the field of fingermark detection on various non-porous surfaces. In this article, we present the improvement of the multimetal deposition, an existing technique limited up to now to non-luminescent results, by obtaining luminescent fingermarks with very good contrast and details. This is seen as a major improvement in the field in terms of selectivity and sensitivity of detection, especially on black surfaces.

Applications of a transportable Raman spectrometer for the in situ detection of controlled substances at border controls

A transportable Raman spectrometer was tested for the detection of illicit drugs seized during border controls. In a first step, the analysis methodology was optimized using reference substances such as diacetylmorphine (heroin), cocaine and amphetamine (as powder or liquid forms). Adequate focalisation distance and times of analysis, influence of daylight and artificial light sources, repeatability and limits of detection were studied. In a second step the applications and limitations of the technique to detect the illicit substances in different mixtures and containers was evaluated. Transportable Raman spectroscopy was found to be adequate for a rapid screen of liquids and powders for the detection and identification of controlled substances. Additionally, it had the advantage over other portable techniques, such as ion mobility spectrometry, of being non-destructive and capable of rapid analysis of large quantities of substances through containers such as plastic bags and glass bottles.

Development of In-Situ Detection Methods for Materials-Related Distress (MRD) in Concrete Pavements, July 2003

The purpose of this research was to summarize existing nondestructive test methods that have the potential to be used to detect materials-related distress (MRD) in concrete pavements. The various nondestructive test methods were then subjected to selection criteria that helped to reduce the size of the list so that specific techniques could be investigated in more detail. The main test methods that were determined to be applicable to this study included two stress-wave propagation techniques (impact-echo and spectral analysis of surface waves techniques), infrared thermography, ground penetrating radar (GPR), and visual inspection. The GPR technique was selected for a preliminary round of “proof of concept” trials. GPR surveys were carried out over a variety of portland cement concrete pavements for this study using two different systems. One of the systems was a state-of-the-art GPR system that allowed data to be collected at highway speeds. The other system was a less sophisticated system that was commercially available. Surveys conducted with both sets of equipment have produced test results capable of identifying subsurface distress in two of the three sites that exhibited internal cracking due to MRD. Both systems failed to detect distress in a single pavement that exhibited extensive cracking. Both systems correctly indicated that the control pavement exhibited negligible evidence of distress. The initial positive results presented here indicate that a more thorough study (incorporating refinements to the system, data collection, and analysis) is needed. Improvements in the results will be dependent upon defining the optimum number and arrangement of GPR antennas to detect the most common problems in Iowa pavements. In addition, refining highfrequency antenna response characteristics will be a crucial step toward providing an optimum GPR system for detecting materialsrelated distress.

In situ introducer sheath dilatation for complex aortic access.

Aortic access problems due to diseased or small peripheral vessels are a major issue in endovascular aneurysm repair (EVAR). In the emergency setting, like aortic rupture after blunt trauma, or in patients with a hostile abdomen, a more proximal access to the aorta is not a pleasant perspective. We developed in situ introducer sheath dilatation as a bail-out technique for patients with difficult aortic access under various circumstances including EVAR, intra-aortic balloon pump insertion and cannulation for perfusion. The method described allows to increase the access vessel diameter by 50% (from 6 to 9 mm) or the luminal circumference from 18 to 27 F. We have used this technique in five patients without complication, very much in contrast to the traditionally practiced 'forced device insertion'.

In situ fast ellipsometric analysis of repetitive surface phenomena

We present an ellipsometric technique and ellipsometric analysis of repetitive phenomena, based on the experimental arrangement of conventional phase modulated ellipsometers (PME) c onceived to study fast surface phenomena in repetitive processes such as periodic and triggered experiments. Phase modulated ellipsometry is a highly sensitive surface characterization technique that is widely used in the real-time study of several processes such as thin film deposition and etching. However, fast transient phenomena cannot be analyzed with this technique because precision requirements limit the data acquisition rate to about 25 Hz. The presented new ellipsometric method allows the study of fast transient phenomena in repetitive processes with a time resolution that is mainly limited by the data acquisition system. As an example, we apply this new method to the study of surface changes during plasma enhanced chemical vapor deposition of amorphous silicon in a modulated radio frequency discharge of SiH4. This study has revealed the evolution of the optical parameters of the film on the millisecond scale during the plasma on and off periods. The presented ellipsometric method extends the capabilities of PME arrangements and permits the analysis of fast surface phenomena that conventional PME cannot achieve.

Diagnostic and identification in situ of fungal pathogens in superficial mycosis

Fungi are divided in 3 groups in the field of medical mycology. The dermatophytes are filamentous fungi able to grow on keratinized tissues from human or animals. They are the main cause of superficial and cutaneous mycoses of the skin and its appendix (hair and nail). The yeasts, or dimorphic fungi, can be responsible of diverse types of infections (superficial to deep mycoses). The moulds include all Non-dermatophyte Filamentous Fungi (NDF). In medical mycology, the most representative moulds are Aspergillus spp., Fusarium spp. and Mucor spp. Diagnosis of mycosis is currently based on direct mycological examination of biological samples, as well as macroscopic and microscopic identification of the infectious fungus in culture assay. However, culture assays were found to remain sterile in roughly 40% of cases otherwise positive by direct mycological examinations. Additionally, results from culture assays are often difficult to interpret as various NDF are sometimes isolated. This thesis work is composed of three projects focusing on the development of new assays for direct in situ identification of fungi from dermatological samples. Part 1. A Polymerase Chain Reaction - Terminal Restriction Fragment Length Polymorphism assay (PCR-TRFLP) targeting the 28S rDNA was developed to identify dermatophytes and NDF in nails with suspected onychomycosis. This method is faster and more efficient than culture. It further enables the distinction of more than one agent in case of mixed infection. A fast and reliable assay for the identification of dermatophytes and NDF in onychomycosis was found to be highly relevant since onychomycosis with Fusarium spp. or other NDF are weakly responsive or unresponsive to standard onychomycosis treatments with oral terbinafine and itraconazole. Part 2. A nested PCR-sequencing assay targeting the 28S rDNA was developed to identify dermatophyte species in skin and hair samples. This method is especially suitable for tinea capitis where dermatophytes identification is critical for subsequently prescribing the adequate treatment. The challenge presented when performing direct PCR fungi identification in skin and hair differs from that seen in onychomycosis as small amount of material is generally collected, few fungal elements are present in the clinical sample and one dermatophyte among a dozen species must be identified. Part 3. Fusarium spp. is currently isolated from nails with a frequency of 15% of that of dermatophytes in the laboratory of Mycology of the CHUV (2005-2012). The aim of this work was to examine if the intensive use of terbinafine and itraconazole could be a cause of the high incidence of Fusarium nail infections. For that purpose, two different methods, specific PCR and TRFLP, were used to detect both Fusarium spp. and Trichophyton spp. in nails of previously treated or untreated patients. TRFLP assay was found to be less sensitive than classical PCR assays specifically detecting Fusarium spp. or Trichophyton spp. Independently of the detection method used, the prevalence of Fusarium spp. appears not to be higher in patients previously treated by oral standard treatment with terbinafine and azoles which are highly effective to fight Trichophyton spp. in nails. In many cases Fusarium sp. was detected in samples of patients not previously subjected to antifungal therapy. Therefore, these treatments do not appear to favor the establishment of Fusarium spp. after elimination of a dermatophyte in nail infection. - En mycologie médicale, les champignons sont classés en 3 groupes. Les dermatophytes sont des champignons filamenteux capables de se développer dans les tissus kératinisés des hommes et des animaux, ils représentent la principale cause des mycoses superficielles et cutanées de la peau et de ses appendices (ongles et cheveux). Les levures, ou champignons dimorphiques, peuvent être responsables de divers types d'infections (superficielles à profondes). Les moisissures incluent tous les champignons filamenteux non-dermatophytes (NDF), les Aspergillus spp., les Fusarium spp. et les Mucor spp. sont les principales espèces rencontrées. Le diagnostic d'une mycose est basé sur un examen mycologique direct des prélèvements biologiques ainsi que sur l'identification macroscopique et microscopique du champignon infectieux isolé en culture. Cependant, dans environ 40% des cas, l'identification de l'agent pathogène est impossible par cette méthode car la culture reste stérile, bien que l'examen direct soit positif. De plus, la croissance de moisissures et/ou autres contaminants peut rendre l'interprétation de l'examen difficile. Ce travail de thèse est composé de trois projets focalisés sur le développement de nouvelles méthodes d'identification des champignons directement à partir d'échantillons dermatologiques. Projet 1. Une méthode de Réaction en chaîne de polymérase couplée à du polymorphisme de longueur des fragments de restriction terminaux (PCR-TRFLP), en ciblant l'ADN ribosomal 28S, a été développée pour l'identification des dermatophytes et moisissures dans les ongles avec suspicion d'onychomycoses. Cette technique s'est avérée plus rapide et plus efficace que la culture, permettant l'identification de plusieurs champignons en même temps. Posséder une méthode d'identification rapide et fiable des dermatophytes et des NDF dans les onychomycoses a été jugée nécessaire du fait que les Fusarium et d'autres NDF sont peu ou pas sensibles aux traitements oraux standards à la terbinafine et à Γ itraconazole. Projet 2. Une PCR nichée couplée au séquençage d'un fragment de l'ADN ribosomal 28S a été développée afin de différencier les dermatophytes dans la peau et les cheveux. Cette méthode est particulièrement adaptée au cas de tinea capitis, où l'identification du dermatophyte est essentielle afin de prescrire le traitement adéquat. Le problème de l'identification du pathogène fongique dans les cheveux et la peau diffère des onychomycoses car de petites quantités sont prélevées chez les patients, peu d'éléments fongiques sont présents et il faut discriminer un dermatophyte parmi une douzaine d'espèces potentielles. Projet 3. Au laboratoire de Mycologie du CHUV, les Fusarium ont été isolé dans les ongles à une fréquence de 15% pour la période 2005-2012. Le but de ce travail était d'examiner si l'utilisation intensive de terbinafine et d'itraconazole pouvait être une des causes de la forte incidence des infections des ongles par Fusarium. A cet effet, deux méthodes ont été utilisées pour détecter à la fois Fusarium spp. et Trichophyton spp., la PCR spécifique et le TRFLP. Indépendamment de la méthode choisie, il en résulte que la prévalence des Fusarium η'apparaît pas liée à un traitement au préalable des patients avec de la terbinafine ou des azoles, thérapies très efficaces contre les Trichophyton spp. dans les ongles. De plus, il existe de nombreux cas où Fusarium était détecté chez des patients non traités.

Hidrogenação de compostos orgânicos utilizando método eletroquímico para geração de hidrogênio in situ: hidrogenação eletrocatalítica

Electrocatalytic hydrogenation (HEC) may be compared to catalytic hydrogenation (HC). The difference between these methods is the hydrogen source: HC needs a hydrogen gas supply; HEC needs a source of protons (solvent) to be reduced at a cathode surface. HEC has presented interesting advances in the last decades due to investigation of the influence of the supporting electrolyte, co-solvent, surfactant, presence of inert gas and the composition of the electrode on the reaction. Several classes of organic compounds have been hydrogenated through HEC: olefins, ketones, aldehydes, aromatics, polyaromatics and nitro-compounds. This paper shows some details about the HEC which may be regarded as a promising technique for the hydrogenation of organic compounds both in industrial processes and in laboratories.