Identification and characterization of virulence factors in Enterococcus faecalis

Enterococci are one of the leading causes of nosocomial infections, and Enterococcus faecalis causes the majority of enterococcal infections. However, the mechanisms of enterococcal pathogenesis are still not yet understood. In our initial screening of E. faecalis strain OG1RF genomic libraries, autolysin and a homolog of a protein of Enterococcus faecium previously designated P54 were found to be two major antigens that reacted with human patient sera, and an antigen designated MH-1 antigen that reacted with serum from a endocarditis patient was also identified. To explore a possible role for these antigens in enterococcal infections, the genes encoding these three antigens were disrupted in Enterococcus faecalis OG1RF. ^ To explore a possible role of an E. faecalis gelatinase (encoded by gelE), which belongs to a family of Zn-metalloproteases that have been shown to be virulence factors in other organisms, in enterococcal infections, an insertion mutant was constructed in OG1RF and tested in the mouse peritonitis model. The mice infected with the gelE mutant showed a significantly prolonged survival compared to the wild type strain. To study the expression of gelE, the regions flanking gelE were sequenced. Sequence analysis of the gelE flanking regions revealed three genes (fsrA, fsrB and fsrC) upstream of gelE that show homology to the genes in a locus (agr) that globally regulates the expression of virulence factors in Staphylococcus aureus and one open reading frame (sprE) with homology to bacterial serine protease downstream of gelE. ^ In conclusion, in this study of identification of possible virulence factors in E. faecalis surface and secreted proteins, of three genes encoding antigens detected by human patient sera, none could be shown to effect virulence in the mouse peritonitis model. Inactivation of one of these antigens (autolysin) was shown to slightly increase the tolerance of E. faecalis to penicillin. A serine protease and a locus (fsr) that regulates the expression of gelE and sprE were shown to be important for enterococcal infection in the mouse peritonitis model. (Abstract shortened by UMI.)^

Liver colonization competence governs colon cancer metastasis.

Tumors that metastasize do so to preferred target organs. To explain this apparent specificity, Paget, > 100 years ago, formulated his seed and soil hypothesis; i.e., the cells from a given tumor would "seed'' only favorable "soil'' offered by certain groups. The hypothesis implies that cancer cells must find a suitable "soil'' in a target organ--i.e., one that supports colonization--for metastasis to occur. We demonstrate in this report that ability of human colon cancer cells to colonize liver tissue governs whether a particular colon cancer is metastatic. In the model used in this study, human colon tumors are transplanted into the nude mouse colon as intact tissue blocks by surgical orthotopic implantation. These implanted tumors closely simulate the metastatic behavior of the original human patient tumor and are clearly metastatic or nonmetastatic to the liver. Both classes of tumors were equally invasive locally into tissues and blood vessels. However, the cells from each class of tumor behave very differently when directly injected into nude mouse livers. Only cells from metastasizing tumors are competent to colonize after direct intrahepatic injection. Also, tissue blocks from metastatic tumors af fixed directly to the liver resulted in colonization, whereas no colonization resulted from nonmetastatic tumor tissue blocks even though some growth occurred within the tissue block itself. Thus, local invasion (injection) and even adhesion to the metastatic target organ (blocks) are not sufficient for metastasis. The results suggest that the ability to colonize the liver is the governing step in the metastasis of human colon cancer.

Julgamento clínico e raciocínio diagnóstico de estudantes de enfermagem em simulação clínica de alta-fidelidade

O ensino dos processos de julgamento clínico e de raciocínio diagnóstico para estudantes de enfermagem torna-se cada vez mais importante para a qualificação dos cursos de graduação em enfermagem e alcance do compromisso com a formação clínica por excelência do enfermeiro, em uma realidade de saúde cada vez mais complexa. Os objetivos deste estudo foram identificar o julgamento clínico e o raciocínio diagnóstico de estudantes de enfermagem, correlacionar estes dois processos e identificar diferenças entre estudantes da fase intermediária e os concluintes do curso, de uma Escola do interior paulista. Para avaliar o julgamento clínico, construímos um cenário de simulação clínica de alta-fidelidade, representando uma paciente com anemia falciforme em crise de dor e, ainda, traduzimos e adaptamos à cultura brasileira o instrumento Lasater Clinical Judgment Rubric (LASATER, 2007); para avaliar o raciocínio diagnóstico, utilizamos o instrumento já adaptado por Rodrigues (2012) denominado de Inventário de Raciocínio Diagnóstico (BORDAGE; GRANT; MARSDEN, 1990). Os resultados demonstraram que os estudantes de enfermagem apresentaram, predominantemente, nível Proficiente na maioria das dimensões de julgamento clínico (66,7% dos estudantes do grupo concluinte e 56,5% dos estudantes do grupo intermediário). Já para o raciocínio diagnóstico, a maioria dos estudantes foi considerada com ampla habilidade para realizar diagnósticos de enfermagem (91,3% dos estudantes do grupo intermediário e 83,4% dos estudantes do grupo concluinte). Destaca-se que dos concluintes 11,1% apresentaram habilidade máxima. Os estudantes do último ano de graduação em enfermagem apresentaram desempenho superior na fase de interpretação do julgamento clínico (p=0,021). Não se observou diferença entre os grupos para o raciocínio diagnóstico (p=0,334). Houve moderada correlação entre julgamento clínico e raciocínio diagnóstico; e ainda, a fase de reconhecimento do julgamento clínico apresentou-se moderadamente correlacionada ao processo de raciocínio diagnóstico. Considerando que o raciocínio diagnóstico está presente no processo de julgamento clínico, principalmente no momento da investigação do caso clínico (fase Reconhecimento do julgamento clínico) e que as habilidades de raciocinio diagnóstico se manifestam predominantemente nesta fase, a compreensão e o desenvolvimento destes processos pelos estudantes devem ser valorizados nos currículos de graduação em enfermagem

HOSPEX in the antipodes

The Australian Army recently adopted the British concept of hospital exercise (HOSPEX) as a means of evaluating the capabilities of its deployable NATO Role 2E hospital, the 2nd General Health Battalion. The Australian approach to HOSPEX differs from the original UK model. This article describes the reasons why the Australian Army needed to adopt the HOSPEX concept, how it was adapted to suit local circumstances and how the concept may evolve to meet the needs of the wider Australian Defence Force and our allies.

Patient-specific finite-element simulation of the human cornea: A clinical validation study on cataract surgery

The planning of refractive surgical interventions is a challenging task. Numerical modeling has been proposed as a solution to support surgical intervention and predict the visual acuity, but validation on patient specific intervention is missing. The purpose of this study was to validate the numerical predictions of the post-operative corneal topography induced by the incisions required for cataract surgery. The corneal topography of 13 patients was assessed preoperatively and postoperatively (1-day and 30-day follow-up) with a Pentacam tomography device. The preoperatively acquired geometric corneal topography – anterior, posterior and pachymetry data – was used to build patient-specific finite element models. For each patient, the effects of the cataract incisions were simulated numerically and the resulting corneal surfaces were compared to the clinical postoperative measurements at one day and at 30-days follow up. Results showed that the model was able to reproduce experimental measurements with an error on the surgically induced sphere of 0.38D one day postoperatively and 0.19D 30 days postoperatively. The standard deviation of the surgically induced cylinder was 0.54D at the first postoperative day and 0.38D 30 days postoperatively. The prediction errors in surface elevation and curvature were below the topography measurement device accuracy of ±5μm and ±0.25D after the 30-day follow-up. The results showed that finite element simulations of corneal biomechanics are able to predict post cataract surgery within topography measurement device accuracy. We can conclude that the numerical simulation can become a valuable tool to plan corneal incisions in cataract surgery and other ophthalmosurgical procedures in order to optimize patients' refractive outcome and visual function.

Patient-specific anisotropic model of human trunk based on MR data

There are many ways to generate geometrical models for numerical simulation, and most of them start with a segmentation step to extract the boundaries of the regions of interest. This paper presents an algorithm to generate a patient-specific three-dimensional geometric model, based on a tetrahedral mesh, without an initial extraction of contours from the volumetric data. Using the information directly available in the data, such as gray levels, we built a metric to drive a mesh adaptation process. The metric is used to specify the size and orientation of the tetrahedral elements everywhere in the mesh. Our method, which produces anisotropic meshes, gives good results with synthetic and real MRI data. The resulting model quality has been evaluated qualitatively and quantitatively by comparing it with an analytical solution and with a segmentation made by an expert. Results show that our method gives, in 90% of the cases, as good or better meshes as a similar isotropic method, based on the accuracy of the volume reconstruction for a given mesh size. Moreover, a comparison of the Hausdorff distances between adapted meshes of both methods and ground-truth volumes shows that our method decreases reconstruction errors faster. Copyright © 2015 John Wiley & Sons, Ltd.

Effects of fibrosis morphology on reentrant ventricular tachycardia inducibility and simulation fidelity in patient-derived models

Myocardial fibrosis detected via delayed-enhanced magnetic resonance imaging (MRI) has been shown to be a strong indicator for ventricular tachycardia (VT) inducibility. However, little is known regarding how inducibility is affected by the details of the fibrosis extent, morphology, and border zone configuration. The objective of this article is to systematically study the arrhythmogenic effects of fibrosis geometry and extent, specifically on VT inducibility and maintenance. We present a set of methods for constructing patient-specific computational models of human ventricles using in vivo MRI data for patients suffering from hypertension, hypercholesterolemia, and chronic myocardial infarction. Additional synthesized models with morphologically varied extents of fibrosis and gray zone (GZ) distribution were derived to study the alterations in the arrhythmia induction and reentry patterns. Detailed electrophysiological simulations demonstrated that (1) VT morphology was highly dependent on the extent of fibrosis, which acts as a structural substrate, (2) reentry tended to be anchored to the fibrosis edges and showed transmural conduction of activations through narrow channels formed within fibrosis, and (3) increasing the extent of GZ within fibrosis tended to destabilize the structural reentry sites and aggravate the VT as compared to fibrotic regions of the same size and shape but with lower or no GZ. The approach and findings represent a significant step toward patient-specific cardiac modeling as a reliable tool for VT prediction and management of the patient. Sensitivities to approximation nuances in the modeling of structural pathology by image-based reconstruction techniques are also implicated.

Development of a computer simulation tool for application in adolescent spinal deformity surgery

Scoliosis is a three-dimensional spinal deformity which requires surgical correction in progressive cases. In order to optimize correction and avoid complications following scoliosis surgery, patient-specific finite element models (FEM) are being developed and validated by our group. In this paper, the modeling methodology is described and two clinically relevant load cases are simulated for a single patient. Firstly, a pre-operative patient flexibility assessment, the fulcrum bending radiograph, is simulated to assess the model's ability to represent spine flexibility. Secondly, intra-operative forces during single rod anterior correction are simulated. Clinically, the patient had an initial Cobb angle of 44 degrees, which reduced to 26 degrees during fulcrum bending. Surgically, the coronal deformity corrected to 14 degrees. The simulated initial Cobb angle was 40 degrees, which reduced to 23 degrees following the fulcrum bending load case. The simulated surgical procedure corrected the coronal deformity to 14 degrees. The computed results for the patient-specific FEM are within the accepted clinical Cobb measuring error of 5 degrees, suggested that this modeling methodology is capable of capturing the biomechanical behaviour of a scoliotic human spine during anterior corrective surgery.

Development of patient-specific computer simulation tools for endoscopic scoliosis surgery

Endoscopic approaches for anterior correction of idiopathic scoliosis are a relatively new surgical technique. This paper describes the development of patient-specific finite element modelling techniques to investigate the biomechanics of single rod anterior scoliosis correction. Spinal geometry is obtained from pre-operative CT scans and material properties for osteo-ligamentous spinal tissues are based on existing literature. The techniques being developed will allow pre-surgical prediction of stresses, forces and deformations in spinal tissues, rods and screws under post-operative physiological loads.

Fluid-structure interaction study on human arterial plaque with patient specific geometry and boundary conditions

Atherosclerotic plaque rupture has been extensively considered as the leading cause of death in western countries. It is believed that high stresses within plaque can be an important factor on triggering the rupture of the plaque. Stress analysis in the coronary and carotid arteries with plaque have been developed by many researchers from 2D to 3-D models, from structure analysis only to the Fluid-Structure Interaction (FSI) models[1].