936 resultados para higher productivity
Resumo:
The demand for alternative sources of energy drives the technological development so that many fuels and energy conversion processes before judged as inadequate or even non-viable, are now competing fuels and so-called traditional processes. Thus, biomass plays an important role and is considered one of the sources of renewable energy most important of our planet. Biomass accounts for 29.2% of all renewable energy sources. The share of biomass energy from Brazil in the OIE is 13.6%, well above the world average of participation. Various types of pyrolysis processes have been studied in recent years, highlighting the process of fast pyrolysis of biomass to obtain bio-oil. The continuous fast pyrolysis, the most investigated and improved are the fluidized bed and ablative, but is being studied and developed other types in order to obtain Bio-oil a better quality, higher productivity, lower energy consumption, increased stability and process reliability and lower production cost. The stability of the product bio-oil is fundamental to designing consumer devices such as burners, engines and turbines. This study was motivated to produce Bio-oil, through the conversion of plant biomass or the use of its industrial and agricultural waste, presenting an alternative proposal for thermochemical pyrolysis process, taking advantage of particle dynamics in the rotating bed that favors the right gas-solid contact and heat transfer and mass. The pyrolyser designed to operate in a continuous process, a feeder containing two stages, a divisive system of biomass integrated with a tab of coal fines and a system of condensing steam pyrolytic. The prototype has been tested with sawdust, using a complete experimental design on two levels to investigate the sensitivity of factors: the process temperature, gas flow drag and spin speed compared to the mass yield of bio-oil. The best result was obtained in the condition of 570 oC, 25 Hz and 200 cm3/min, temperature being the parameter of greatest significance. The mass balance of the elementary stages presented in the order of 20% and 37% liquid pyrolytic carbon. We determined the properties of liquid and solid products of pyrolysis as density, viscosity, pH, PCI, and the composition characterized by chemical analysis, revealing the composition and properties of a Bio-oil.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
O estudo objetivou avaliar translocação orgânica, índices fisiológicos da análise de crescimento e rendimento do óleo essencial de Mentha piperita L. cultivada em solução nutritiva com variação dos níveis de N, P, K e Mg. Assim, foram avaliados os quatro tratamentos contendo 50% N, P, K, 25% Mg; 50% N, P, K, Mg; 65%N, 50%P, 25%K, 100% Mg e 100% N, P, K, Mg. A translocação orgânica foi avaliada por meio da determinação da razão de massa foliar (RMF) e da distribuição de massa seca para os diferentes órgãos. Os índices fisiológicos razão de área foliar (RAF), área foliar específica (AFE), taxa assimilatória líquida (TAL) e taxa de crescimento relativo (TCR) derivadas que compõem a análise de crescimento foram estimados pelo programa ANACRES, após ajuste exponencial quadrático da área foliar e massa seca de lâminas foliares e total da planta em relação ao tempo. O rendimento do óleo essencial, em porcentagem, foi calculado após extração da parte aérea por hidrodestilação. As plantas submetidas ao tratamento com nível completo de nutrientes (100%N/P/K/Mg) exportaram com menor eficiência o material orgânico a partir da folha e a RMF mostrou queda mais lenta, devido à retenção desse material por mais tempo no local de sua produção. Além disso, não apresentaram melhor produtividade e as curvas da TAL e TCR mostraram quedas mais lentas. As plantas submetidas ao tratamento com 65%N/50%P/25%K/100%Mg revelaram adequada exportação de matéria orgânica da folha para caule e pecíolos, conforme demonstra a RMF e a distribuição de massa seca para esses órgãos. Revelaram ainda a RAF mais elevada no inicio do desenvolvimento e mais baixa aos 94 DAT, indicando sombreamento das folhas como resultado de seu crescimento. A AFE dessas plantas mostrou menor variação durante o ciclo, refletindo espessura mais constante de suas folhas. A TAL e a TCR apresentaram curvas decrescentes, com quedas bem acentuadas em relação às demais plantas. Todos esses índices indicam melhor produtividade das plantas submetidas ao tratamento 65%N/50%P/25%K/100%Mg, que também apresentaram rendimento de óleo essencial, em média, maior durante o ciclo. Conclui-se que a redução de 35% de N, 50% de P, 75% de K (65%N/50%P/25%K/100%Mg) é indicada para o cultivo e extração de óleo essencial de M. piperita.
Resumo:
O fator climático exerce grande influência na produção de sementes de feijão, porém outros fatores como a ação do ambiente solo, conseqüência de seu manejo, associado à nutrição adequada da planta, principalmente de nitrogênio, podem levar a resultados expressivos tanto no ganho de produtividade como na obtenção de produto de qualidade superior. O objetivo deste trabalho foi avaliar a influência de dois sistemas de manejo de solo (preparo convencional e plantio direto) e da adubação nitrogenada de cobertura (0, 40, 80, 120 e 160kg.ha-1 de N) sobre a produtividade e qualidade fisiológica de sementes de feijão, num delineamento experimental em blocos ao acaso em esquema de parcelas subdivididas, com quatro repetições. Verificou-se que a produtividade de sementes é influenciada positivamente pela adubação nitrogenada de cobertura, tanto no sistema de preparo convencional de solo quanto no plantio direto. Nas doses de nitrogênio em cobertura utilizadas, o sistema de preparo convencional de solo apresenta maior produtividade de sementes. Aumento nas doses de nitrogênio em cobertura possibilitam acréscimos na germinação e no vigor das sementes de feijão. O sistema de preparo convencional de solo promove sementes de maior qualidade fisiológica, expressos pelo testes de germinação e envelhecimento acelerado.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Microalgae are microscopic photosynthetic organisms that grow rapidly and in different environmental conditions due to their simple cellular structure. The cultivation of microalgae is a biological system capable of storing solar energy through the production of organic compounds via photosynthesis, and these species presents growth faster than land plants, enabling higher biomass yield. Thus, it is understood that the cultivation of these photosynthetic mechanisms is part of a relevant proposal, since, when compared to other oil producing raw materials, they have a significantly higher productivity, thus being a raw material able to complete the current demand by biodiesel . The overall aim of the thesis was to obtain biofuel via transesterification process of bio oil from the microalgae Isochrysis galbana. The specific objective was to estimate the use of a photobioreactor at the laboratory level, for the experiments of microalgae growth; evaluating the characteristics of biodiesel from microalgae produced by in situ transesterification process; studying a new route for disinfection of microalgae cultivation, through the use of the chemical agent sodium hypochlorite. The introduction of this new method allowed obtaining the kinetics of the photobioreactor for cultivation, besides getting the biomass needed for processing and analysis of experiments in obtaining biodiesel. The research showed acceptable results for the characteristics observed in the bio oil obtained, which fell within the standards of ANP Resolution No. 14, dated 11.5.2012 - 18.5.2012. Furthermore, it was demonstrated that the photobioreactor designed meet expectations about study culture growth and has contributed largely to the development of the chosen species of microalgae. Thus, it can be seen that the microalgae Isochrysis galbana showed a species with potential for biodiesel production
Resumo:
Este trabalho teve por objetivo avaliar os efeitos da época da semeadura no comportamento de diferentes cultivares de arroz (Oryza sativa L.) de sequeiro (IAC 201, Carajás, Guarani, IAC 202, CNA 7800, CNA 7801, Caiapó, Rio Paranaíba e Araguaia) irrigados por aspersão, quanto à produção e qualidade dos grãos. As sementes foram semeadas no início da segunda quinzena dos meses de setembro, outubro, novembro, dezembro, janeiro e fevereiro. Os experimentos foram instalados no Município de Selvíria, MS, durante os anos agrícolas 1995/96 e 1996/97. O delineamento experimental utilizado foi o de blocos casualizados, com quatro repetições. O controle da irrigação foi realizado por meio de tensiômetros, e a suplementação hídrica foi realizada quando o potencial matricial atingiu -0,033 MPa, durante a fase reprodutiva e -0,058 MPa, nas demais fases. de acordo com os resultados obtidos, pode-se concluir que as cultivares CNA 7801, Carajás, IAC 201, CNA 7800 e IAC 202 apresentaram comportamento superior; a semeadura realizada em novembro propiciou produtividade mais elevada; semeaduras antecipadas (setembro-outubro) ou retardada (fevereiro) resultaram em menores índices de acamamento; as cultivares IAC 202, CNA 7800 e CNA 7801 apresentaram ausência ou baixo índice de acamamento, nas diferentes épocas de semeadura e, a semeadura retardada (fevereiro) proporcionou a obtenção de maior rendimento de inteiros.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Effect of green manure and sowing date on the productivity of bean no-tillage in the Cerrado region. Green manure and sowing date are two important factors that influence the productivity of cultivars. The objective of this study was to evaluate the production of biomass from different vegetation covers (millet, sorghum and Brachiaria brizantha) and the accumulation of nutrients and their effects on the bean cultivars (Pearl, IAC Tuna and Carioca Precoce) at different sowing dates (6/22 and 7/6). The experiment was conducted at the experimental area of the Universidade Estadual Paulista - Unesp, located in Selviria, Mato Grosso do Sul State, in the 2006/2007 agricultural year. The randomized blocks design was used with four replications, and the evaluations of the coverage were: the biomass of fresh and dry matter and nutrients accumulated in plants; for the beans: cycle, final stand, number of pods/plant, number of seeds per pod, mass of 100 seeds, and productivity. It was observed that millet and sorghum showed higher productivity of fresh and dry mass, and accumulate greater quantity of nutrients in straw; the time most suitable for sowing was in June, and the late sowing of cv. Carioca Precoce did not affect their productivity, the use of Brachiaria brizantha straw in coverage provided better conditions for productivity in the bean no-tillage system.
Resumo:
Broiler production in Brazil has turned into a very competitive activity in the late years. Constant innovation leads to higher productivity maintaining the same cost of production, which is a desirable situation. Lately one characteristic for broiler housing in Brazil has been the increase in birds density requiring the use of controlled environment through the use of fan and fogging systems in order to achieve better birds productive performance. Most Brazilian producer already uses cooling equipment however it is still unknown the right way to control the wind speed and direction towards the birds. This present research has the objective to evaluate the effect of the wind speed on the heat transfer from the birds to the environment for broilers at 27 days old. There was used 200 birds, placed in a wind tunnel measuring 1.10 m high by 1.10m wide x 10.0 m of length, and the birds density varied from 9, 16 and 20 birds/m 2. Two wind speed were simulated 340 rpm (1.0 m/s) and 250 rpm (0.3 m/s). The increase in the wind velocity related to the smaller bird densityled to a higher heat loss and to a more uniform temperature distribution in its exposed areas.
Resumo:
The population structure of U. vocator was investigated during a one-year period in three mangrove forests in southeast Brazil. The study specifically addressed comparisons on individual size juvenile recruitment and sex-ratio. The structure of the mangrove forests, i.e. density, basal area, and diameter, and the physical properties of sediments. i.e. texture and organic matter contents, were also examined. A catch-per-unit-effort (CPUE) technique was used to sample the crab populations using 15-min sampling periods by two people. Males always outnumbered females, probably due to ecological and behavioural attributes of these crabs. The median size of fiddler crabs differed among the sampled populations. The mangroves at Indaiá and Itamambuca showed higher productivity than those at Itapanhaú, where oil spills impacting the shore were reported. Marked differences were found regarding individual size, either their size at the onset of sexual maturity or their asymptotic size, suggesting that food availability may be favouring growth in the studied populations.
Resumo:
Includes bibliography
Resumo:
Includes bibliography
Resumo:
Incluye Bibliografía
Resumo:
The objective of this work was to study spatial variability of some chemical soil attributes and lettuce production (total shoot fresh matter mass - MF; commercial shoot fresh matter mass - MFC; commercial shoot dry matter mass - MCS; and head commercial diameter - DCC) offering subsidies to the protected environment mapping in nutrients management areas in lettuce culture aiming for a higher productivity with application of fertilizers. The experiment was conducted in a protective environment (greenhouse) with lettuce irrigated by drip irrigation and sampling grid with 152 points. The special dependence analysis, determined by the variogram, was obtained with the aid of the GS+ Program. Considering the need for crop nutrients through the map obtained for element P (phosphorus) it was possible to establish two distinct areas for the application of this element in plantation fertilization. Through the lettuce yield maps obtained with MFC and DCC attributes was difficult to establish distinct areas for its management with data observed in only one crop cycle. Krigagem has proved useful for mapping the attributes studied.