Recovery boilers - history and future

Recovery boilers are built all over the world. The roots of recovery technology are longer than the roots of recovery boilers. But it wasn’t until the invention of recovery boilers before the Second World War that the pulping technology was revolutionalized. This led to long development of essentially the same type of equipment, culminating into units that are largest biofuel boilers in the world. Early recovery technology concentrated on chemical recovery as chemicals cost money and if one could recycle these chemicals then the profitability of pulp manufacture would improve. For pulp mills the significance of electricity generation from the recovery boiler was for long secondary. The most important design criterion for the recovery boiler was a high availability. The electricity generation in recovery boiler process can be increased by elevated main steam pressure and temperature or by higher black liquor dry solids as well as improving its steam cycle. This has been done in the modern Scandinavian units.

Global patterns of plant root colonization intensity by mycorrhizal fungi explained by climate and soil chemistry

Aim Most vascular plants on Earth form mycorrhizae, a symbiotic relationship between plants and fungi. Despite the broad recognition of the importance of mycorrhizae for global carbon and nutrient cycling, we do not know how soil and climate variables relate to the intensity of colonization of plant roots by mycorrhizal fungi. Here we quantify the global patterns of these relationships. Location Global. Methods Data on plant root colonization intensities by the two dominant types of mycorrhizal fungi world-wide, arbuscular (4887 plant species in 233 sites) and ectomycorrhizal fungi (125 plant species in 92 sites), were compiled from published studies. Data for climatic and soil factors were extracted from global datasets. For a given mycorrhizal type, we calculated at each site the mean root colonization intensity by mycorrhizal fungi across all potentially mycorrhizal plant species found at the site, and subjected these data to generalized additive model regression analysis with environmental factors as predictor variables. Results We show for the first time that at the global scale the intensity of plant root colonization by arbuscular mycorrhizal fungi strongly relates to warm-season temperature, frost periods and soil carbon-to-nitrogen ratio, and is highest at sites featuring continental climates with mild summers and a high availability of soil nitrogen. In contrast, the intensity of ectomycorrhizal infection in plant roots is related to soil acidity, soil carbon-to-nitrogen ratio and seasonality of precipitation, and is highest at sites with acidic soils and relatively constant precipitation levels. Main conclusions We provide the first quantitative global maps of intensity of mycorrhizal colonization based on environmental drivers, and suggest that environmental changes will affect distinct types of mycorrhizae differently. Future analyses of the potential effects of environmental change on global carbon and nutrient cycling via mycorrhizal pathways will need to take into account the relationships discovered in this study.

Structural and electrochemical characteristics of Mg((55-x))Ti(x)Ni((45-y))Pt(y) metal hydride electrodes

In recent years, Mg-Ni-based metastable alloys have been attracting attention due to their large hydrogen sorption capacities, low weight, low cost, and high availability. Despite the large discharge capacity and high activity of these alloys, the accelerated degradation of the discharge capacity after only few cycles of charge and discharge is the main shortcoming against their commercial use in batteries. The addition of alloying elements showed to be an effective way of improving the electrode performance of Mg-Ni-based alloys. In the present work, the effect of Ti and Pt alloying elements on the structure and electrode performance of a binary Mg-Ni alloy was investigated. The XRD and HRTEM revealed that all the investigated alloy compositions had multi-phase nanostructures, with crystallite size in the range of 6 nm. Moreover, the investigated alloying elements demonstrated remarkable improvements of both maximum discharge capacity and cycling life. Simultaneous addition of Ti and Pd demonstrated a synergetic effect on the electrochemical properties of the alloy electrodes. Among the investigated alloys, the best electrochemical performance was obtained for the Mg(51)Ti(4)Ni(43)Pt(2) composition (in at.%), which achieved 448 mAh g(-1) of maximum discharge capacity and retained almost 66% of this capacity after 10 cycles. In contrast, the binary Mg(55)Ni(45) alloy achieved only 248 mAh g(-1) and retained 11% of this capacity after 10 cycles. (C) 2010 Elsevier By. All rights reserved.

Validação experimental de sistemas de arquivos baseados em journaling para o sistema operacional Linux

Alta disponibilidade (muitas vezes referenciada como HA, de High Availability) é uma característica de sistemas computacionais que são projetados para evitar ao máximo as interrupções, planejadas ou não, na prestação de serviços. Em alta disponibilidade, o ideal é haver poucas falhas e, mesmo quando estas acontecerem, que o seu tempo médio de reparo (ou MTTR, de Mean Time To Repair) seja tão pequeno quanto possível. Sistemas operacionais têm um papel importante em alta disponibilidade, sendo preferível o uso daqueles que possuam sistemas de arquivos seguros e relativamente independentes de ações por agentes humanos para a recuperação. Uma das abordagens para auxiliar a obter-se uma alta disponibilidade em sistemas de arquivos é a do tipo journaling, ou meta-data logging. Existe uma série de sistemas de arquivos para o sistema operacional Linux baseando-se nela, tais como ext3, JFS, ReiserFS e XFS. Este trabalho tem por objetivo propor uma metodologia de validação experimental para avaliar a eficiência do mecanismo para recuperação de sistemas de arquivos baseados em journaling, na ocorrência de falhas. Para isso, a técnica de validação empregada é a da injeção de falhas e o sistema sob teste é uma implementação do XFS. Foram utilizados os recursos de depuração do sistema operacional Linux (que permitem a utilização de métodos para interceptação e manipulação de chamadas de sistema) para a implementação de um injetor de falhas específico para sistemas de arquivos baseados em journaling, o qual foi chamado de FIJI (Fault Injector for Journaling fIlesystems). Manipular os parâmetros de chamadas de sistema (ou system calls) através do FIJI equivale a alterar as requisições feitas ao sistema operacional. A eficiência do mecanismo de journaling é medida injetando-se falhas e medindose o MTTR e a cobertura de falhas. Basicamente, o que procura-se fazer através do injetor de falhas FIJI é ignorar os logs do journaling e manipular uma quantidade de informações diferente daquela que foi solicitada originalmente.

Estrutura e dinâmica do fitoplânctone bacterioplâncton em cultivos de camarão no Rio Grande do Norte-Brasil: impacto sobre o ambiente natural

This work aimed to study the structure and dynamic of Phytoplankton and Bacterioplankton in a complete cycle of shrimp cultivation (Litopenaeus vannamei) and determine the environmental factors responsible for the structural changes of these communities. The study was realized in a saltwater shrimp farm (Macaíba, RN), between September/2005 and February/2006, and in a freshwater shrimp farm (Ceará Mirim, RN), between May/2007 and September 2007. The samplings were collected weekly in saltwater farm and every fifteen days in freshwater farm. Total phosphorus, chlorophyll a and environmental parameters (pH, dissolved oxygen, salinity, temperature, depth and water transparency) were measured. Qualitative and quantitative analysis of the phytoplankton and bacterioplankton were carried out. The Shannon-Wiener ecologic indexes of diversity and the Pielou equitability indexes were calculated to the phytoplankton. Bacterial density was determined by epifluorescence microscopy. The data were statistically analyzed by Pearson correlation and t-Test. Chlorophycea were predominat in salt water and in the captation/drainage point (24 to 99%). Diatoms had higher wealth. The species Choricystis minor had the highest occurrence (100%) and dominance (90-100%), thus showing its adaptation to the high temperatures, salinity and low water transparency conditions. Filamentous Cyanobacteria like Oscillatoria sp., Pseudoanabaena sp. and Phormidium sp. had constant levels. The negative correlation between chlorophycea and water transparency, and the positive correlation between chlorophyll a and salinity, showed that the phytoplankton was well adapted to the low transparency and to the high salinity. The bacterioplankton was negatively correlated with the total phosphorus and salinity. In freshwater, Cyanobacteria were predominant (>80%), presenting some producers of toxins species like Microcystis sp., Aphanizomenon sp., Cylindrospermopsis raciborskii e Anabaena circinalis. Cyanobacterial density and total phosphorus and chlorophyll a concentrations exceeded the maximum value allowed by legislation. The means of total phosphorus varied from 264 to 627 Wg.L-1 and the means of chlorophyll a oscillated between 22 and 182 Wg.L-1. The phytoplankton species were selected by low availability of the light, high pH, temperature and high availability of total phosphorus. The bacterioplankton showed high densities (5,13 x 107 to 8,50 x107 Bac.mL-1). The studied environments (ponds and rivers) presented a high level of trophic state based on the high concentrations of chlorophyll a and total phosphorus and cyanobacteria dominance. The composition of species in the ponds and rivers was similar, as well as high concentrations of total phosphorus and chlorophyll a, highlighting the pollution caused by the discharges of the farms in natural environment

Impregnação de metais em xisto retortado para uso como adsorventes

Concern with the environment has lead to an increase in the research for new adsorption techniques, low cost adsorvent materials and with high availability. Many works search the development of higher selectivity modified adsorvents. The Brazil has the second world reserve of oiled shale, because of it, the use of that reject is of great interest. This study has the goal of characterize and analyze the retorted shale, reject of the pirobetuminous shale pyrolysis, and the retorted shale modified through the humid impregnation method, wich the precursors were the metals nitrates ( Cobalt, Nickel and Copper), to the usage has adsorvent materials. The samples were characterized chemically, textually and structurally by the X ray fluorescence (XRF), BET, X ray diffraction (XRD) and scanning electronic microscopy (SEM) techniques. The impregnated samples showed a reduction in the superficial area and in the pore volume when compared with the retorted shale. Besides that, diffractions referred to the impregnated metals where observed in the XRD analysis, wich were the same metals detected in the XRF and SEM analysis. The materials showed homogeneity in it s composition. The results shows that the materials presents adequate adsorption characteristics

Avaliação do efeito da adição de resíduo de borracha de pneu e brita calcária na formulação de compósitos cimentíceos

Researches have shown that the introduction of rubber in concrete improves the features of its deformability, as well as contributes to environmental disposal of waste generated in the tire retreading process. Furthermore, there is a high availability of limestone within RN and CE country. Ignorance about this stone, does not allow its wide use as aggregate, leaving, this abundant supply idle. A composite of limestone gravel, with proportions of tire rubber waste which could be used as concrete would be an alternative to concrete for low applications. Therefore, this research aims to evaluate the characteristics of concrete containing limestone gravel and proportions of little aggregate replacement (sand) by tire rubber waste. To this goal, the material components of the concrete were characterized, concrete specimens with limestone gravel were made, from the dash 1.0: 2.5: 3.5, varying the water/cement ratio, and inserting a commercial plasticizer, without a proportion of residue, known as reference. From this, concrete with and without the presence of the additive in the same proportions were chosen, as well as these with the use of granite gravel, for being the most used. Selected the references, to these, replacements of little aggregate (sand) were added replaced by rubber waste from the tire retreading process, treated with 1M NaOH in proportions from 5.0 to 20.0 % by mass, cured and exposed to the semiarid environment. The results indicate the possibility of using limestone gravel in the concrete composition with workability correction using plasticizer. There was a decrease in the mechanical properties of the concrete with increments of waste rubber, but there is an improvement in toughness and deformability of the composite, which makes it interesting for the construction of non-structural concrete floors, as well as, the rubber waste delayed the hardening process, continuing to gain resistance after 28 days

Caenorhabditis elegans as a model to screen plant extracts and compounds as natural anthelmintics for veterinary use

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desenvolvimento de um meio de cultivo econômico para a produção de probióticos como aditivos zootécnicos

Pós-graduação em Microbiologia - IBILCE

Utilização de resíduos agronômicos da mandioca para fabricação de papéis especiais como recurso alternativo para a comunicação visual

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Valor nutritivo da leguminosa Flemingia macrophylla (Willd.) Merrill para suplementação alimentar de ruminantes na Amazônia Oriental

O conhecimento do valor nutritivo de plantas forrageiras é de grande relevância quando se pretende elevar a produtividade dos sistemas pecuários na Amazônia Oriental, principalmente em áreas onde ocorre deficiência de forragem de boa qualidade, em períodos de déficit hídrico. Assim, caracterizar a potencialidade da leguminosa Flemingia macrophylla (Willd.) Merrill, como alternativa para alimentação animal, assume relevante importância, pois pode influenciar no desempenho produtivo de bovídeos para carne e leite. Dessa forma, esta pesquisa visou avaliar a composição química, digestibilidade aparente e consumo voluntário dessa leguminosa na alimentação suplementar de ruminantes, em períodos de reduzida disponibilidade de forragem, de baixo valor nutritivo. O trabalho foi realizado na Embrapa Amazônia Oriental, em Belém-Pará, (1º28´ S 48º27´ W de Greenwich). Foram determinadas as características nutricionais da leguminosa, durante um período de 21 dias, com 16 ovinos, em gaiolas metabólicas individuais, distribuídas em delineamento inteiramente casualizado, em quatro tratamentos e quatro repetições, onde os tratamentos (T1, T2, T3 e T4) continham quicuio-da-amazônia (Brachiaria humidicola) e níveis crescentes de 100%, 75%, 50% e 25% de inclusão de F. macrophylla. Os teores de tanino na composição da dieta foram 1,37; 0,62; 0,31 e 0,17%, respectivamente. Os consumos de matéria seca, em g/dia e % do peso vivo, foram de 901,8 e 2,4; 947,9 e 2,5; 859,5 e 2,2; e 930,2 e 2,5 e de proteína bruta 232,4; 188,7; 132,1 e 107,6 g/dia. Os coeficientes de digestibilidade da matéria seca foram de 54,1; 59,2; 55,1; e 62,0%, da matéria orgânica de 57,3; 61,2; 57,6; e 64,0% e de proteína bruta de 63,2; 60,5; 51,4; 52,0%, respectivamente. A leguminosa possui potencial produtivo, com elevada disponibilidade de matéria seca, para ser utilizada como suplemento alimentar para ruminantes, principalmente em períodos críticos. Níveis de inclusão de F. macrophylla, em torno de 75%, possibilitam maior consumo da matéria seca, matéria orgânica, e das frações fibrosas e 100% permitem melhor consumo de PB e EB.

Sistema baseado em software livre para reconhecimento de fala em nuvem em português brasileiro com alta disponibilidade

Este trabalho visa propor uma solução contendo um sistema de reconhecimento de fala automático em nuvem. Dessa forma, não há necessidade de um reconhecedor sendo executado na própria máquina cliente, pois o mesmo estará disponível através da Internet. Além do reconhecimento automático de voz em nuvem, outra vertente deste trabalho é alta disponibilidade. A importância desse tópico se d´a porque o ambiente servidor onde se planeja executar o reconhecimento em nuvem não pode ficar indisponível ao usuário. Dos vários aspectos que requerem robustez, tal como a própria conexão de Internet, o escopo desse trabalho foi definido como os softwares livres que permitem a empresas aumentarem a disponibilidade de seus serviços. Dentre os resultados alcançados e para as condições simuladas, mostrou-se que o reconhecedor de voz em nuvem desenvolvido pelo grupo atingiu um desempenho próximo ao do Google.

Adubação fosfatada no desenvolvimento de Hemerocallis fulva L.

In clayey Oxisol from the Brazilian Cerrado, where there is high P fixation, the phosphorus fertilization is necessary to increase the growth and flowering of ornamental plants. Thus, the objective of this study was to analyze the development of Hemerocallis as affected by phosphorus application in clayey Oxisol (Typic Haplustox). The experiment was conducted at the Gardening area of University Federal of Grande Dourados (UFGD) in Dourados-MS, Brazil. The experimental design was a randomized block with four replications. The treatments consisted of four P2O5 rates (0, 250, 500, 1000 kg ha(-1)) using simple superphosphate as source. The experimental unit was composed of one Hemerocallis fulva 'Flore Pleno' plant, grown in a plastic pot (5 liters). Phosphorus fertilization increased linearly the concentration of phosphorus in the soil; the plant had maximum absorption (5.26 g kg(-1)) with the calculated dose of 727 kg ha(-1) P2O5. H. fulva has a root system that develops best under high availability of P, however, for aerial part, the maximum of shoots fresh mass (451.1 g) was obtained with 427 kg ha(-1) of P2O5. Number of flower buds, flower diameter and height flower stalks were higher in the presence of phosphorus.

GASTROPOD SHELLS USED BY Dardanus insignis (Decapoda, Anomura) NEAR ISLANDS IN THE UBATUBA REGION, SAO PAULO, BRAZIL

The use of gastropod shells by hermit crabs is determined by the availability of shells in the environment or through selection for size and volume. This study analyzed patterns in the use of shells by Dardanus insignis (Saussure, 1858). From January 1998 to December 1999, 386 individuals were collected from two islands at Ubatuba, Sao Paulo. The crabs were measured for cephalothoracic shield length (CSL) and wet weight (CWW). The gastropod shells occupied by hermit crabs were identified, and the shell aperture width (SAW), dry weight (SDW) and internal volume (STY) were measured. The relationships between the dimensions of the gastropod shell and the hermit crabs were evaluated by linear regression analysis. Among the 11 species of gastropod shells used by D. insignis, the most often used was Olivancillaria urceus (31%), followed by Strombus pugilis (22%) and Siratus tenuivaricosus (18%). The shell of O. urceus was used most probably due to its high availability on Couves and Mar Virado islands. The most significant biometric parameter was shell aperture width (F=18.231; p<0.0001), highlighting the importance of this variable for the shell choice by D. insignis at both sites.

Analise técnico-econômica de um gaseificador Downdraft e de filtros para limpeza de gás de síntese

The biomass gasification systems have been used for a long time and prove to be a good alternative to the generation of energy problems. This type of management requires a simple installation and maintenance which gives them a high availability. In Biomass project via Call CTEnerg 33/2006-1, funded by the Ministry of Science and Technology - MCT - Brazil, the Group Energy Systems Optimization – GOSE - at FEG - UNESP built and tested two prototypes of gasifiers. These is fed with 25 kg / h of dry wood (chips), and 50 Nm3 / h of air to produce gas at a flow rate of approximately 70 Nm3 / h of wood (syngas) at a temperature approximately 600 ° C. In this work of graduation, studies were conducted on the materials used in both the gasifier as well as cleaning the filter synthesis gases. The system of gas cleaning and conditioning is vital to ensure the life of the Internal Combustion Engine. In this case the studies of different filters for small gasification systems (properties, materials used, characteristics, types, etc.) are very relevant to its use in the prototype of the college campus. Were also performed a technical and economic analysis of a cogeneration system that consists in the combination of the downdraft gasifier studied in this work, an internal combustion engine, two heat exchangers and a SRA (absorption system refrigerator). Were calculated the costs of electricity generation, hot water and cold water. Finally, we analyzed the economic feasibility of the project