I. The crystal structure of a new dimer of triphenylfluorocyclobutadiene. II. A low temperature refinement of the cyanuric triazide structure

I. THE CRYSTAL STRUCTURE OF A NEW DIMER OF TRIPHENYLFLUOROCYCLOBUTADIENE

The crystal structure of thermal isomer of the “head-to-head” dimer of triphenylfluorocyclobutadiene was determined by the direct method. The Σ₂ relationship involving the low angle reflections with the largest E’s were found and solved for the signs by the symbolic method of Zachariasen. The structure was seen in the electron density map and the E-map, and was refined antisotropically by the method of least squares. The residual R was 0.065.

The structure is a gem-difluorohexaphenyldihydropentalene. All of the phenyl groups are planar as it is the cyclopentadiene ring of the dihydropentalene skeleton. Overcrowding at the position of the flourines causes some deviations from the normal bond angles in the cyclopentene ring.

The list of observed and calculated structure factors on pages 32-34 will not be legible on the microfilm. Photographic copies may be obtained from the California Institute of Technology.

II. A LOW TEMPERATURE REFINEMENT OF THE CYANURIC TRIAZIDE STRUCTURE

The structure of cyanuric triazide was refined anisotropically by the method of least squares. Three-dimensional intensity data, which has been collected photographically with MoK_α radiation at -110˚C, were used in the refinement. The residual R was reduced to 0.081.

The structure is completely planar, and there is no significant bond alternation in the cyanuric ring. The packing of the molecules causes the azide groups to deviate from linearity by 8 degrees.

Two Glass Transitions Associated to Different Dynamic Disorders in the Nematic Glassy State of a Non-Symmetric Liquid Crystal Dimer Dopped with gamma-Alumina Nanoparticles

In the present work, the nematic glassy state of the non-symmetric LC dimer -(4-cyanobiphenyl-4-yloxy)--(1-pyrenimine-benzylidene-4-oxy) undecane is studied by means of calorimetric and dielectric measurements. The most striking result of the work is the presence of two different glass transition temperatures: one due to the freezing of the flip-flop motions of the bulkier unit of the dimer and the other, at a lower temperature, related to the freezing of the flip-flop and precessional motions of the cyanobiphenyl unit. This result shows the fact that glass transition is the consequence of the freezing of one or more coupled dynamic disorders and not of the disordered phase itself. In order to avoid crystallization when the bulk sample is cooled down, the LC dimer has been confined via the dispersion of -alumina nanoparticles, in several concentrations.

中药射干的化学成分研究

本学位论文由4章组成。第一章是论文的主体，报道了中药射干的化学成分研究。第二章是中药射干代用品川射干的化学成分研究，并附带报道了西番莲化学成分的研究结果。第三章是射干、川射干及西番莲提取物化学成分串联质谱分析的报道。第四章为综述，概述了射干及鸢尾属植物的化学成分和药理研究进展。 在第一和二章中分别报道了射干（Belamcanda chinensis (L.) DC.）、川射干 （Iris tectorum Maxim.）及西番莲（Passiflora incarnate L.）化学成分的分离纯化与结构鉴定。采用正、反相硅胶柱层析、凝胶柱层析、薄层制备及HPLC等各种分离方法，从三种药用植物中共分离出68个不同的化合物，其中61个的结构得 得以鉴定，另外4个化合物的结构正在鉴定中，3个由于量少且有点杂质未作进一步的鉴定。 中药射干（Rhizoma Belamcandae）为射干植物的干燥根茎，从中共分离出53个化合物，通过红外、质谱及核磁共振等波谱方法鉴定了包括12个新化合物在内的48个，结构类型分别属于iridal型三萜及其新颖的二聚体、异黄酮、黄酮及黄酮醇、香豆素、甾体、芳香酸和脂肪酸及其甘油酯等。新化合物中有两个异黄酮类化合物，其结构分别鉴定为5,7,8,4′-四羟基-6-甲氧基异黄酮和5,6-二羟基-4′-甲氧基异黄酮-7-O-β-D-吡喃葡萄糖苷；八个新的iridal型三萜化合物分别鉴定为鸢尾烯（L）、16-甲氧基鸢尾烯、16-去羟基鸢尾烯、2-(E)-16-去羟基鸢尾烯、16-去羟基鸢尾烯B、3-乙酰基-16-去羟基鸢尾烯、iristectoroneL和iristectoroneM；两个结构骨架新颖的双三萜，分别命名为射干素A和射干素B，其分离纯化的困难以及结构的新颖和复杂突显出该论文的科学意义。除这些新化合物外，还有9个已知化合物为首次从中药射干中分离得到。此外，从中药射干的代用品川射干中分离得到7个已知化合物，主要是黄酮类成分及iridal型三萜化合物，其中1个三萜化合物为从射干中分离鉴定的新成分。另外还从西番莲中分离出8个化合物，鉴定了其中的6个，主要为黄酮碳苷。 第三章是关于射干、川射干及西番莲提取物化学成分的ESI-MS-MS分析，在初步探讨了从这些植物中分离鉴定出的一些异黄酮及黄酮碳苷的质谱裂解规律基础上，通过质谱和串联质谱分析，定性和半定量地检测了射干和川射干中主要的异黄酮成分以及西番莲中的黄酮碳苷成分，为这些药材品质的快速鉴定提供了一种简便方法。 第四章概述了射干及鸢尾属药用植物的化学和药理研究进展，特别是对其中异黄酮及三萜类成分的研究进展进行了深入系统的综述。 This dissertation is composed by four chapters. The first and second chapter reports the phytochemical investigation of three medicine plants, Belamcanda chinensis (L.)DC., Iris tectorum Maxim. and Passiflora incarnate L. Sixty eight different compounds were isolated and sixty one of them were identified. The third chapter described rapid ESI-MS-MS analysis of B. chinensis, I. tectorum, and P. incarnate. The forth part is a review about the progress of studies on the chemical constituents from Belamcanda chinensis and Iris species. Fifty-three compounds were isolated from Rhizoma Belamcandae, the rhizomes of B. chinensis by the methods of column chromatography (normal and reversed phase silica gel, Sephadex LH-20), preparative TLC and HPLC. On the basis of spectroscopic methods including IR, ESI-MS, 1-D and 2-D NMR, forty eight of them were identified as seventeen flavonoids, seventeen tritepenoids, one cumarin, five steroids and some benzene derivative etc. Among them, the structures of twelve new compounds were elucidated as 6-methoxy-5,7,8,4′-tetrahydryoxyisoflavoe, 4′-methoxy-5,6-dihydroxyisoflavone-7-O-β-D-glucopyranoside, iristectorene L, 16-methoxyisoiridogermanal, 16-dehydroxyisoiridogermanal, 2-(E)-16-dehydroxy isoiridogermanal, 16-dehydroxyiristectorene B, 3-acetyl-16-dehydroxyisoiridoger- manal, iristectorone L, iristectorone M, belamcandene A and belamcandene B. Last two new compounds are dimer of triterpenoids with a novel carbon skeleton. Beside the new compounds, nine known ones were isolated from this plant for the first time. Isolation of I. tectorum yielded seven compounds. On the basis of spectroscopic methods including ESI-MS, NMR and the comparison with authentic samples, three of them were determined as isoflavone, two of them were triterpenoids, and other two were β-sitosterol and apocynin. All of them are known compounds except one of iridal type triterpenoid, 16-dehydroxyiristectorene B, which also obtained from B. chinensis as a new compound. Isolation of P. incarnate yielded eight compounds. Six of them were determined on the basis of spectroscopic methods including ESI-MS, NMR and the comparison with authentic samples. Four of them are flavone-C-gluconside, and two are steroids. The third chapter describes the tandem mass spectrometry (ESI-MS-MS) analysis of the isoflavonoids from B. chinensis and I. tectorum, as well as C-glycosyl-flavonoide from P. incarnate, in order to explore the rapid methodology of validating the quality of the herbs. In addition, the fractionation rules of some iosflavonoids and C-glycosyl-flavonoids were discussed. The fourth chapter summarizes the research development on chemistry and pharmacology of medicine plants of B.chinensis and Iris species.

Syntheses and Crystal Structures of Fused Thiophenes: [7]Helicene and Double Helicene, a D-2-Symmetric Dimer of 3,3 '-Bis(dithieno[2,3-b:3 ',2 '-d]thiophene)

The efficient synthesis of (TMS)(2)-[7]helicene (rac-3) and double helicene, a D-2-symmetric dimer of 3,3'-bis(dithieno-[2,3-b:3',2'-d]thiophene) (rac-4) was developed. The crystal structures of 3 and 4 show both strong intermolecular pi-pi interactions and S center dot center dot center dot S interactions. UV/vis spectra reveal that both 3 and 4 show significant pi-electron delocalization.

Supramolecular architectures, photophysics, and electroluminescence of 1,3,4-oxadiazole-based iridium(III) complexes: From mu-dichloro bridged dimer to mononuclear complexes

One mu-dichloro bridged diiridium complex and three mononuclear iridium(III) complexes based on the 1,3,4-oxadiazole derivatives as cyclometalated ligands and acetylacetonate (acac) or dithiolates O,O'-diethyldithiophosphate (Et(2)dtp) or N,N'-diethyldithiocarbamate (Et(2)dtc) as ancillary ligands have been synthesized and systematically studied by X-ray diffraction analysis. The results reveal that three mononuclear complexes all adopt distorted octahedral coordination geometry around the iridium center by two chelating ligands with cis-C-C and trans-N-N dispositions, which have the same coordination mode as the diiridium dimer. The dinuclear complex crystallizes in the monoclinic system and space group C2/c, whereas three mononuclear iridium complexes are all triclinic system and space group P(1) over bar. In the stacking structure of the dimer, one-dimensional tape-like chains along the b-axis are formed by hydrogen bondings, which are strengthened by pi stacking interactions between phenyl rings of 1,3,4-oxadiazole ligands. Then these chains assemble a three-dimensional alternating peak and valley fused wave-shape structure. In each stacking structure of three mononuclear complexes, two molecules form a dimer by the C-H center dot center dot center dot O hydrogen bondings, and these dimers are connected by pi stacking interactions along the b-axis, constructing a zigzag chain.

Electronic structures of hafnium dimer and trimer by density functional theory

Equilibrium geometries, vibrational frequencies and dissociation energies of hafnium dimer and trimer were studied by density functional methods B3LYP, BLYP, B3PW91, BHLYP, BP86, B3P86, mPW1PW91 and PBE1PBE. The results indicate that singlet is the ground state both for hafnium dimer and for trimer. For hafnium dimer, the calculated bond distance is less sensitive to the methods used. Except at BHLYP level, the calculated vibrational frequency is comparable to the experimental value. For hafnium trimer, equilateral triangle with D-3h symmetry is slightly favored compared with isosceles triangle with C-2v, symmetry except at BHLYP level. This conclusion is in agreement with experiment in which the ground state of Hf-3 is fluxional and low-spin or closed shell is preferred.

Ground state of lutetium dimer by density functional methods

Bond distances, vibrational frequencies and dissociation energies for the ground state of Lu-2 were studied by density functional methods B3LYP, B3PW91, BLYP, BHLYP, BP86, B3P86, MPW1PW91, PBE1PBE and SVWN with CEP-121G and SDD basis sets. Singlet state is predicted to be the most stable. CEP-121G has a better overall performance than SDD. At CEP-121G basis set, all density functional methods used in this study perform well in reproducing the spectroscopic constants.

6,7,8,9-Tetrahydro-5H-pyrido[2,3-b]azepine-5,8-dione: a hydrogen-bonded dimer structure

In the title compound, C9H8N2O2, two crystallographically independent molecules form a dimer structure, in which two N-H center dot center dot center dot N hydrogen bonds generate an intermolecular R-2(2)( 8) ring.

Structure of Cyclic Aryl Thioester Dimer Based on o-Phthaloyl Dichloride and Bis(4-mercaptophenyl) Sulfide

A cyclic aryl thioester dimer was prepared by the reaction of o-phthaloyl dichloride and his (4-mercaptophenyl) sulfide in good yield under pseudo-high dilution conditions via interfacial polycondensation. The structure of the cyclic dimer was confirmed by a combination of MALDI-TOF-MS, FTIR, gel permeation chromatography and MM analyses. The X-ray diffraction study of the single crystal of cyclic thioester dimer obtained from two solutions reveals no severe internal strain on the cyclic structure.

A novel dimer - Heteropolytungstate with a vanadium atom as the centre - Synthesis and structural characterization of (H3O)(4)[VW12O40Na (H2O)(4)](2)

A novel dimer-tungstovanadate, (H3O)(4)[VW12O40Na (H2O)(4)](2), was hydrothermally synthesized and structurally characterized by single crystal X-ray diffraction, IR spectra, TGA-DSC thermal analysis and polarograpy. The yellowish crystal crystallized in the triclinic system, space group P1, a = 1.464 5(3) nm, b = 1.468 6(3) nm, c = 1.411 1(3) nm, alpha = 111.82(2)degrees, beta = 93.17(3)degrees, gamma = 117.47(3)degrees, V = 2.210 6(8) nm(3), Z = 1, D-c = 4.552 g . cm(-3), lambda (Mo K alpha) = 0.071 073 nm, mu = 31.402 mm(-1) F(000) = 2 6481 R = 0.078 0. The title compound consists of two Keggin structure units linked together with two hydrated sodium cations to form a dimer with a porous structure with the pore dimension of 0.766 nm X 0.778 5 nm.

Isolation, spectra, structure, and ring-opening polymerization of strained macrocyclic aryl(ether ketone) dimer

Macrocyclic arylene ether ketone dimer was isolated from a mixture of cyclic oligomers obtained by the nucleophilic substitution reaction of bisphenol A and 4,4'-difluorobenzophenone and easily polymerized to high molecular weight linear poly(ether ketone). The cyclic compound was characterized by FTIR, H-1- and C-13-NMR, and single-crystal x-ray diffraction. Analysis of the spectral and crystal structure reveals extreme distortions of he phenyl rings attached to the isopropylidene center and of the turning points of the molecular polygons. The release of the ring strain on ring-opening combined with entropical difference between the linear polymer chain and the more rigid macrocycle at temperatures of polymerization may be the proposed motivating factors in the polymerization of this precursor to high molecular weight poly(ether ketone). (C) 1997 John Wiley & Sons, Inc.