Lessons learned from INTAMAP, an interoperable web service for the real-time interpolation of environmental variables

Interpolated data are an important part of the environmental information exchange as many variables can only be measured at situate discrete sampling locations. Spatial interpolation is a complex operation that has traditionally required expert treatment, making automation a serious challenge. This paper presents a few lessons learnt from INTAMAP, a project that is developing an interoperable web processing service (WPS) for the automatic interpolation of environmental data using advanced geostatistics, adopting a Service Oriented Architecture (SOA). The “rainbow box” approach we followed provides access to the functionality at a whole range of different levels. We show here how the integration of open standards, open source and powerful statistical processing capabilities allows us to automate a complex process while offering users a level of access and control that best suits their requirements. This facilitates benchmarking exercises as well as the regular reporting of environmental information without requiring remote users to have specialized skills in geostatistics.

Fish farm effluent control and the development of an expert system

In recent years, freshwater fish farmers have come under increasing pressure from the Water Authorities to control the quality of their farm effluents. This project aimed to investigate methods of treating aquacultural effluent in an efficient and cost-effective manner, and to incorporate the knowledge gained into an Expert System which could then be used in an advice service to farmers. From the results of this research it was established that sedimentation and the use of low pollution diets are the only cost effective methods of controlling the quality of fish farm effluents. Settlement has been extensively investigated and it was found that the removal of suspended solids in a settlement pond is only likely to be effective if the inlet solids concentration is in excess of 8 mg/litre. The probability of good settlement can be enhanced by keeping the ratio of length/retention time (a form of mean fluid velocity) below 4.0 metres/minute. The removal of BOD requires inlet solids concentrations in excess of 20 mg/litre to be effective, and this is seldom attained on commercial fish farms. Settlement, generally, does not remove appreciable quantities of ammonia from effluents, but algae can absorb ammonia by nutrient uptake under certain conditions. The use of low pollution, high performance diets gives pollutant yields which are low when compared with published figures obtained by many previous workers. Two Expert Systems were constructed, both of which diagnose possible causes of poor effluent quality on fish farms and suggest solutions. The first system uses knowledge gained from a literature review and the second employs the knowledge obtained from this project's experimental work. Consent details for over 100 fish farms were obtained from the public registers kept by the Water Authorities. Large variations in policy from one Authority to the next were found. These data have been compiled in a computer file for ease of comparison.

Majestic Gamification:a case study in the adoption of a service innovation

Purpose: A case study is presented concerning a gamified awards system designed to encourage software users to explore a suite of tools, and to share their expertise level in profile pages. Majestic is a high-tech business based in the West Midlands (UK) w hich offers a Link Intelligence database using a Software as a Service (SaaS) business model. Customers leverage the database for tasks including Search Engine Optimisation (SEO) by using a suite of web-based tools. Getting to know all the tools and how they can be deployed to good effect represents a considerable learning challenge, and Majestic were aware that. Design/methodology/approach: We present the development of Majestic Awards as a case study highlighting the most important design decisions. Then we reflect on the development process as an example of innovation adoption, thereby identifying resources and cu ltura l factors which were critical in ensuring the success of the project. Findings: The gamified awards system makes learning the tools an enjoyable, explorative experience. Success factors included identifying a clear business goal, the process/ project f it, senior management buy in, and identifying the knowledge and resources to resolve t echnical issues. Originality/value: Prior to gamification of the system, only the most expert users regu larly utilized all the tools. The user base is now more knowl edgable about the system and some users choose to use the system to publicize their expertise.

Defining failure in the nonprofit organization: The case of four human service agencies

Private nonprofit human service organizations provide a spectrum of services that aim to resolve societal problems. Their failure may leave needed and desired services unprovided or not provided sufficiently to meet public demand. However, the concept of organizational failure has not been examined for the nonprofit organization. This research addresses the deficiency in the literatures of organization failure and nonprofit organizations.^ An eight category typology, developed from a review of the current literature and findings from expert interviews, is initially presented to define nonprofit organization failure. A multiple case study design is used to test the typology in four nonprofit human service delivery agencies. The case analysis reduces the typology to five types salient to nonprofit organization failure: input failure, legitimacy failure, adaptive failure, management failure and leadership failure.^ The resulting five category typology is useful to both theory builders and nonprofit practitioners. For theory development, the interaction of the failure types extends the literature and lays a foundation for a theory of nonprofit organization failure that diffuses management and leadership across all of the failure types, highlights management and leadership failure as collective functions shared by paid staff and the volunteer board of directors, and emphasizes the importance of organization legitimacy.^ From a practical perspective, the typology provides a tool for diagnosing failure in the nonprofit organization. Using the management indicators developed for the typology, a checklist of the warning signals of potential failure, emphasizing the key types of management and leadership, offers nonprofit decision makers a priori examination of an organization's propensity for failure. ^

Civil service reform trends in public personnel management: Experiences from the Commonwealth of the Bahamas

This study has explored the potential for implementing a merit-based public personnel system in The Bahamas, a former British colony in The Commonwealth Caribbean. Specifically, the study evaluated the use of merit-based public personnel management practices in areas of recruitment, selection, promotion, training and employee development and performance evaluation. Driving forces and barriers which impact merit system successes and failures as well as strategies for institutionalizing merit system practices are identified. Finally the study attempted to apply the developmental model created by Klingner (1996) to describe the stage of public personnel management in The Bahamas. The data for the study was collected through in-depth interviews with expert observers. ^

Responsibility and Well-Being: Resource Integration Under Responsibilization in Expert Services

Responsibilization, or the shift of functions and risks from providers and producers to consumers, has become an increasingly common policy in service systems and marketplaces (e.g., financial, health, governmental). As responsibilization is often considered synonymous with consumer agency and well-being, the authors take a transformative service research perspective and draw on resource integration literature to investigate whether responsibilization is truly associated with well-being. The authors focus on expert services, for which responsibilization concerns are particularly salient, and question whether this expanding policy is in the public interest. In the process, they develop a conceptualization of resource integration under responsibilization that includes three levels of actors (consumer, provider, and service system), the identification of structural tensions to resource integration, and three categories of resource integration practices (access, appropriation, and management) necessary to negotiate responsibilization. The findings have important implications for health care providers, public and institutional policy makers, and other service systems, all of which must pay more active attention to the challenges consumers face in negotiating responsibilization and the resulting well-being outcomes.

Responsibility and Well-being: Resource Integration under Responsibilization in Expert Services

Responsibilization, or the shift in functions and risks from providers and producers to the consumer, has become an increasingly common policy in service systems and marketplaces (e.g., financial, health, governmental). Responsibilization is often presented as synonymous with consumer agency and well-being. We take a transformative service research perspective and utilize the resource integration framework to investigate whether responsibilization is truly associated with well-being. We focus on expert services, where responsibilization concerns are particularly salient, and question whether this expanding policy is in the public interest. In the process, we develop a conceptualization of resource integration under responsibilization that includes three levels of actors (consumer, provider and service system), the identification of structural tensions to resource integration and three categories of resource integration practices (access, appropriation and management) necessary to negotiate responsibilization. Our findings have important implications for health care providers, public policy makers, and other service systems, all of which must pay more active attention to the challenges consumers face in negotiating responsibilization and the resulting well-being outcomes.

Palliative Medicine:Scoping the level and extent of service provision to people with intellectual disability at end of life Poster Presentation

Background: Concerns exist about the end of life care
that people with intellectual disabilities receive. This population
are seldom referred to palliative care services and
inadequate data sets exist about their place of death.
Aim: To scope the extent of service provision to people
with intellectual disabilities at the end of life by specialist
palliative care and intellectual disability services in one
region of the United Kingdom.
Methods: As part of a larger doctoral study a regional survey
took place of a total sample (n=66) of specialist palliative
care and intellectual disability services using a postal
questionnaire containing forty items. The questionnaire
was informed by the literature and consultation with an
expert reference group. Data were analysed using SPSS to
obtain descriptive statistics.
Results: A total response rate from services of 71.2%
(n=47) was generated. Findings showed a range of experience
among services in providing end of life care to people
with intellectual disabilities in the previous five years, but
general hospitals were reported the most common place of
death. A lack of accessible information on end of life care
for people with learning disabilities was apparent. A few
services (n=14) had a policy to support this population to
make decisions about their care or had used adapted Breaking
Bad News guidelines (n=5) to meet their additional
needs. Both services recognised the value of partnership
working in assessing and meeting the holistic needs of
people with intellectual disabilities at end of life.
Conclusions: A range of experience in caring for people
with intellectual disabilities was present across services,
but more emphasis is required on adapting communication
for this population to facilitate them to participate in their
care. These findings could have international significance
given that studies in other countries have highlighted a
need to widen access to palliative care for this group of
people.

Machine learning as a service for high energy physics (MLaaS4HEP): a service for ML-based data analyses

With the CERN LHC program underway, there has been an acceleration of data growth in the High Energy Physics (HEP) field and the usage of Machine Learning (ML) in HEP will be critical during the HL-LHC program when the data that will be produced will reach the exascale. ML techniques have been successfully used in many areas of HEP nevertheless, the development of a ML project and its implementation for production use is a highly time-consuming task and requires specific skills. Complicating this scenario is the fact that HEP data is stored in ROOT data format, which is mostly unknown outside of the HEP community. The work presented in this thesis is focused on the development of a ML as a Service (MLaaS) solution for HEP, aiming to provide a cloud service that allows HEP users to run ML pipelines via HTTP calls. These pipelines are executed by using the MLaaS4HEP framework, which allows reading data, processing data, and training ML models directly using ROOT files of arbitrary size from local or distributed data sources. Such a solution provides HEP users non-expert in ML with a tool that allows them to apply ML techniques in their analyses in a streamlined manner. Over the years the MLaaS4HEP framework has been developed, validated, and tested and new features have been added. A first MLaaS solution has been developed by automatizing the deployment of a platform equipped with the MLaaS4HEP framework. Then, a service with APIs has been developed, so that a user after being authenticated and authorized can submit MLaaS4HEP workflows producing trained ML models ready for the inference phase. A working prototype of this service is currently running on a virtual machine of INFN-Cloud and is compliant to be added to the INFN Cloud portfolio of services.

[principles Of Universality, Comprehensiveness And Equity In A Hearing Health Care Service].

This article analyzed whether the practices of hearing health care were consistent with the principles of universality, comprehensiveness and equity from the standpoint of professionals. It involved qualitative research conducted at a Medium Complexity Hearing Health Care Center. A social worker, three speech therapists, a physician and a psychologist constituted the study subjects. Interviews were conducted as well as observation registered in a field diary. The thematic analysis technique was used in the analysis of the material. The analysis of interviews resulted in the construction of the following themes: Universality and access to hearing health, Comprehensive Hearing Health Care and Hearing Health and Equity. The study identified issues that interfere with the quality of service and run counter to the principles of Brazilian Unified Health System. The conclusion reached was that a relatively simple investment in training and professional qualification can bring about significant changes in order to promote a more universal, comprehensive and equitable health service.

A retrospective study of Traumatic Dental Injuries in a Brazilian dental urgency service

Epidemiologic aspects of traumatic dental injuries (TDI) were evaluated in the permanent dentition in a sample of 847 patients treated at the Dental Urgency Service of the Dental School of the Federal University of Goiás, Brazil, between May 2000 and May 2008. The statistical treatment analyzed data from frequency distribution and chi-square test. The level of significance was set at 5% for all analyses. The results showed a higher incident among males (610; 72.01%) with mean age of 6-10 year-old. Uncomplicated crown fracture (without pulp exposure) (502; 26.95%), avulsion (341; 18.30%) and complicated crown fracture (with pulp exposure) (330; 17.71%) were the most prevalent TDI. The prevalence of trauma throughout the years showed proportionality, being observed a larger number of cases between July and September (249; 29.39%). The most affected teeth were the maxillary central incisors (65.65%), followed by the maxillary left lateral incisors (19.67%). In 311 participants (18.25%), only one tooth was involved, while in most patients (536; 81.75%), TDI occurred in more than one tooth. Significant proportion (82.27%) of traumatized teeth presented completely formed root apex. The main etiologic factors involved in TDI were falls (51.71%), traffic accidents (22.90%) and violence (5.67%). Based on the obtained data, it may be concluded that accurate policies of TDI prevention must be established, capable of stimulating the exposure of appropriate protocols for management of these lesions. The prevalence of TDI in Goiânia subpopulation is compared to the prevalence reported in epidemiological studies in others populations.

The Process of Simulation Authoring/Creation by Chemistry Teachers: A Service Learning Experience

Two case studies are presented to describe the process of public school teachers authoring and creating chemistry simulations. They are part of the Virtual Didactic Laboratory for Chemistry, a project developed by the School of the Future of the University of Sao Paulo. the documental analysis of the material produced by two groups of teachers reflects different selection process for both themes and problem-situations when creating simulations. The study demonstrates the potential for chemistry learning with an approach that takes students' everyday lives into account and is based on collaborative work among teachers and researches. Also, from the teachers' perspectives, the possibilities of interaction that a simulation offers for classroom activities are considered.

An expert flow system involving in-line prior assay for turbidimetric determination of chloride and sulphate in natural waters

A multi-pumping flow system exploiting prior assay is proposed for sequential turbidimetric determination of sulphate and chloride in natural waters. Both methods are implemented in the same manifold that provides facilities for: in-line sample clean-up with a Bio-Rex 70 mini-column with fluidized beads: addition of low amounts of sulphate or chloride ions to the reaction medium for improving supersaturation; analyte precipitation with Ba(2+) or Ag(+); real-time decision on the need for next assay. The sample is initially run for chloride determination, and the analytical signal is compared with a preset value. If higher, the sample is run again, now for sulphate determination. The strategy may lead to all increased sample throughput. The proposed system is computer-controlled and presents enhanced figures of merit. About 10 samples are run per hour (about 60 measurements) and results are reproducible and Unaffected by the presence of potential interfering ions at concentration levels usually found in natural waters. Accuracy was assessed against ion chromatography. (C) 2008 Elsevier B.V. All rights reserved.

MODELING OF AN INFORMATION SYSTEM FOR WINE TRACEABILITY BASED ON A SERVICE ORIENTED ARCHITECTURE

The purpose is to present a scientific research that led to the modeling of an information system which aimed at the maintenance of traceability data in the Brazilian wine industry, according to the principles of a service-oriented architecture (SOA). Since 2005, traceability data maintenance is an obligation for all producers that intend to export to any European Union country. Also, final customers, including the Brazilian ones, have been asking for information about food products. A solution that collectively contemplated the industry was sought in order to permit that producer consortiums of associations could share the costs and benefits of such a solution. Following an extensive bibliographic review, a series of interviews conducted with Brazilian researchers and wine producers in Bento Goncalves - RS, Brazil, elucidated many aspects associated with the wine production process. Information technology issues related to the theme were also researched. The software was modeled with the Unified Modeling Language (UML) and uses web services for data exchange. A model for the wine production process was also proposed. A functional prototype showed that the adopted model is able to fulfill the demands of wine producers. The good results obtained lead us to consider the use of this model in other domains.

Application of the essential work of fracture method in ranking the performance in service of high-density polyethylene resins employed in pressure pipes

High-density polyethylene resins have increasingly been used in the production of pipes for water- and gas-pressurized distribution systems and are expected to remain in service for several years, but they eventually fail prematurely by creep fracture. Usual standard methods used to rank resins in terms of their resistance to fracture are expensive and non-practical for quality control purposes, justifying the search for alternative methods. Essential work of fracture (EWF) method provides a relatively simple procedure to characterize the fracture behavior of ductile polymers, such as polyethylene resins. In the present work, six resins were analyzed using the EWF methodology. The results show that the plastic work dissipation factor, beta w(p), is the most reliable parameter to evaluate the performance. Attention must be given to specimen preparation that might result in excessive dispersion in the results, especially for the essential work of fracture w(e).