904 resultados para encoding of measurement streams
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
A paradox is pointed out and resolved by proving that the average energy E = [H] of a macroscopic system in thermal equilibrium must increase by the measurement of an observable A which does not commute with the Hamiltonian H. The proof follows as a corollary of a more general result, which states that under certain conditions the expectation value [C] of an observable C should increase by the measurement of another observable A, if [A, C] not-equal 0.
Resumo:
This paper presents a general modeling approach to investigate and to predict measurement errors in active energy meters both induction and electronic types. The measurement error modeling is based on Generalized Additive Model (GAM), Ridge Regression method and experimental results of meter provided by a measurement system. The measurement system provides a database of 26 pairs of test waveforms captured in a real electrical distribution system, with different load characteristics (industrial, commercial, agricultural, and residential), covering different harmonic distortions, and balanced and unbalanced voltage conditions. In order to illustrate the proposed approach, the measurement error models are discussed and several results, which are derived from experimental tests, are presented in the form of three-dimensional graphs, and generalized as error equations. © 2009 IEEE.
Resumo:
The fishes of the present study were collected in the headwater streams of the Sorocaba, Paranapanema and Ribeira de Iguape river basins during the dry period in 2010. A total of 2892 fishes, grouped in 53 species, were captured. The composition of the ichthyofauna captured in the streams of Sorocaba and Paranapanema river basin was greatly similar. On the other hand, the fish fauna of the streams of Ribeira de Iguape river basin were quite different from the ones captured in the others basins, with the occurrence of endangered species (Isbrueckerichthys epakmos and I. duseni) and exotic species (Misgurnus anguillicaudatus). The previous list of fish for the Sorocaba river basin increased with the addition of seven species of Characiformes, one Gymnotiformes and four Siluriformes. © 2012 Check List and Authors.
Resumo:
Includes bibliography
Resumo:
This paper reviews and synthesizes the literature on social upgrading, while exploring its connections with economic upgrading. Using the parsimonious method proposed by Bernhardt and Milberg and an alternative method that takes into account increases in national productivity, this paper analyzes the case of Mexico. Though the proposed approach to social upgrading can be made more sophisticated through the inclusion of more variables, in order to facilitate the replication of the analysis in developing countries where data are scarce, labor productivity, wages and employment were considered sufficient information to analyze economic and social upgrading.
Resumo:
Este estudo teve como objetivo descrever a organização funcional da fauna de peixes de riachos do nordeste do estado do Pará, Brasil, com base em observações comportamentais das táticas alimentares das espécies. Sete igarapés foram amostrados entre junho e novembro de 2010 por técnicas de observações diretas durante sessões de mergulho livre, totalizando 91h 51min de observação, nos períodos diurno, crepuscular vespertino e noturno. Foram observadas 73 espécies distribuídas em seis ordens, 26 famílias e 63 gêneros, com predomínio de Characiformes, seguidos por Siluriformes. A partir de informações coligidas por observações ad libitum, as espécies foram organizadas em 18 grupos tróficos funcionais (GTFs), de acordo com duas características principais: (1) a tática alimentar observada com maior frequência; e (2) sua distribuição espacial no riacho, considerando suas dimensões lateral (margens e canal central) e vertical (coluna d'água). Os GTFs mais frequentes foram Catadores noturnos de invertebrados (9 espécies), Coletores diurnos de canal (8 spp.), Catadores diurnos de superfície (7 spp.), e Predadores de tocaia e emboscada (6 spp.). Os GTFs aqui definidos possibilitam uma análise comparativa da estrutura e composição da ictiofauna, que representa uma abordagem alternativa ao uso da estrutura taxonômica em estudos ecológicos. A classificação da ictiofauna baseada em GTFs proposta neste trabalho é comparada com outras três classificações, propostas por Sazima (1986), Sabino & Zuanon (1998) e Casatti et al. (2001).
Resumo:
This study aimed to assess measurements of temperature and relative humidity obtained with HOBO a data logger, under various conditions of exposure to solar radiation, comparing them with those obtained through the use of a temperature/relative humidity probe and a copper-constantan thermocouple psychrometer, which are considered the standards for obtaining such measurements. Data were collected over a 6-day period (from 25 March to 1 April, 2010), during which the equipment was monitored continuously and simultaneously. We employed the following combinations of equipment and conditions: a HOBO data logger in full sunlight; a HOBO data logger shielded within a white plastic cup with windows for air circulation; a HOBO data logger shielded within a gill-type shelter (multi-plate prototype plastic); a copper-constantan thermocouple psychrometer exposed to natural ventilation and protected from sunlight; and a temperature/relative humidity probe under a commercial, multi-plate radiation shield. Comparisons between the measurements obtained with the various devices were made on the basis of statistical indicators: linear regression, with coefficient of determination; index of agreement; maximum absolute error; and mean absolute error. The prototype multi-plate shelter (gill-type) used in order to protect the HOBO data logger was found to provide the best protection against the effects of solar radiation on measurements of temperature and relative humidity. The precision and accuracy of a device that measures temperature and relative humidity depend on an efficient shelter that minimizes the interference caused by solar radiation, thereby avoiding erroneous analysis of the data obtained.
Resumo:
Evaluations of measurement invariance provide essential construct validity evidence. However, the quality of such evidence is partly dependent upon the validity of the resulting statistical conclusions. The presence of Type I or Type II errors can render measurement invariance conclusions meaningless. The purpose of this study was to determine the effects of categorization and censoring on the behavior of the chi-square/likelihood ratio test statistic and two alternative fit indices (CFI and RMSEA) under the context of evaluating measurement invariance. Monte Carlo simulation was used to examine Type I error and power rates for the (a) overall test statistic/fit indices, and (b) change in test statistic/fit indices. Data were generated according to a multiple-group single-factor CFA model across 40 conditions that varied by sample size, strength of item factor loadings, and categorization thresholds. Seven different combinations of model estimators (ML, Yuan-Bentler scaled ML, and WLSMV) and specified measurement scales (continuous, censored, and categorical) were used to analyze each of the simulation conditions. As hypothesized, non-normality increased Type I error rates for the continuous scale of measurement and did not affect error rates for the categorical scale of measurement. Maximum likelihood estimation combined with a categorical scale of measurement resulted in more correct statistical conclusions than the other analysis combinations. For the continuous and censored scales of measurement, the Yuan-Bentler scaled ML resulted in more correct conclusions than normal-theory ML. The censored measurement scale did not offer any advantages over the continuous measurement scale. Comparing across fit statistics and indices, the chi-square-based test statistics were preferred over the alternative fit indices, and ΔRMSEA was preferred over ΔCFI. Results from this study should be used to inform the modeling decisions of applied researchers. However, no single analysis combination can be recommended for all situations. Therefore, it is essential that researchers consider the context and purpose of their analyses.
Resumo:
Modifications and upgrades to the hydraulic flume facility in the Environmental Fluid Mechanics and Hydraulics Laboratory (EFM&H) at Bucknell University are described. These changes enable small-scale testing of model marine hydrokinetic(MHK) devices. The design of the experimental platform provides a controlled environment for testing of model MHK devices to determine their effect on localsubstrate. Specifically, the effects being studied are scour and erosion around a cylindrical support structure and deposition of sediment downstream from the device.
Resumo:
For the development of meniscal substitutes and related finite element models it is necessary to know the mechanical properties of the meniscus and its attachments. Measurement errors can falsify the determination of material properties. Therefore the impact of metrological and geometrical measurement errors on the determination of the linear modulus of human meniscal attachments was investigated. After total differentiation the error of the force (+0.10%), attachment deformation (−0.16%), and fibre length (+0.11%) measurements almost annulled each other. The error of the cross-sectional area determination ranged from 0.00%, gathered from histological slides, up to 14.22%, obtained from digital calliper measurements. Hence, total measurement error ranged from +0.05% to −14.17%, predominantly affected by the cross-sectional area determination error. Further investigations revealed that the entire cross-section was significantly larger compared to the load-carrying collagen fibre area. This overestimation of the cross-section area led to an underestimation of the linear modulus of up to −36.7%. Additionally, the cross-sections of the collagen-fibre area of the attachments significantly varied up to +90% along their longitudinal axis. The resultant ratio between the collagen fibre area and the histologically determined cross-sectional area ranged between 0.61 for the posterolateral and 0.69 for the posteromedial ligament. The linear modulus of human meniscal attachments can be significantly underestimated due to the use of different methods and locations of cross-sectional area determination. Hence, it is suggested to assess the load carrying collagen fibre area histologically, or, alternatively, to use the correction factors proposed in this study.
Resumo:
Community colleges play a pivotal role in Massachusetts’ higher education system. They award associate’s degrees, offer an affordable pathway to a bachelor's degree, and provide access to higher education for underserved populations. Community colleges also offer workforce development and industry certification for those entering the world of work, those who are currently employed but need more training or retraining, and those who have been dislocated from their careers by the global economic crisis. To increase access to both college credits and improved work skills, community colleges provide remedial or developmental education to ensure all students can pursue a program of study (Dougherty & Townsend, 2006; Mullin, 2010b).