972 resultados para embodied technical change
Resumo:
The Nature-Based Solutions (NBS) concept and approach were developed to simultaneously face challenges such as risk mitigation and biodiversity conservation and restoration. NBSs have been endorsed by major International Organizations such as the EU, the FAO and World Bank that are pushing to enable a mainstreaming process. However, a shift from traditional engineering “grey” solutions to wider and standard adoption of NBS encounters technical, social, cultural, and normative barriers that have been identified with a qualitative content analysis of policy documents, reports and expert interviews. The case of the region Emilia-Romagna was studied by developing an analytical framework that brought together the social-ecological context, the governance system and the characteristics of specific NBSs.
Resumo:
Neste artigo, estendemos o modelo Pasinettiano de mudança estrutural e crescimento econômico para levar em consideração a possibilidade de o progresso tecnológico estar incorporado nos bens de capital. Nosso objetivo consiste em estudar os efeitos do progresso tecnológico investimento específico sobre a mudança estrutural, com especial ênfase nos seus impactos sobre variáveis macroeconômicas como o nível de emprego. Nossos achados mostram que, apesar de esse tipo de progresso tecnológico aumentar a produtividade dos bens de capital, ele impacta negativamente o nível de emprego e as condições de equilíbrio da economia. _________________________________________________________________________________ ABSTRACT
Resumo:
This paper contributes to the literature on both embodied technical progress and firm dynamics, by formulating an endogenous growth model where selection and imitation play a fundamental role in helping capital good producers to learn about the productivity of technologies embodied in new plants. By calibrating the model to some key aggregates particularly relevant for the embodied capital literature, among them the growth rate of the relative investment price, the model quantitatively replicates the main facts associated to firm dynamics, such as the entry rate and the tail index of the establishment size distribution. In line with the previous literature, it also predicts a contribution to productivity growth of embodied technical progress and selection of around 60%
Upgrading or polarization? occupational change in Britain, Germany, Spain and Switzerland, 1990-2008
Resumo:
This paper analyzes the pattern of occupational change in four Western European countries over the last two decades: what kind of jobs have been expanding -- high-paid jobs, low-paid jobs or both? By addressing this issue, we also examine what theoretical account is consistent with the observed pattern of change: skill-biased technical change, skill supply evolution or wage-setting institutions? Our empirical findings show a picture of massive occupational upgrading that closely matches educational expansion. In all four countries, by far the strongest employment growth occurred at the top of the occupational hierarchy, among managers and professionals. Yet in parallel, in Britain and Switzerland, as well as in Germany and Spain after 1996 and 2002 respectively, relative employment declined more strongly in the middling occupations (among clerks and production workers) than at the bottom (among interpersonal service workers). This slightly polarized pattern of occupational upgrading is consistent with the "routinization" hypothesis that technology is a better substitute for average-paid jobs in production and the office that for low-paid jobs in interpersonal services. However, we find large cross-country differences in the employment evolution at the bottom of the occupational hierarchy, among low-paid services workers: sizeable growth in Britain and Spain, but stagnation in Germany and Switzerland. This results points towards the possibility that wage-setting institutions filter the pattern of occupational change.
Resumo:
[cat] Les darreres dècades s’han caracteritzat per un intens augment de les desigualtats salarials a nivell mundial. Aquest article allarga la hipòtesi clàssica de la Corba de Kuznets per cobrir les economies post-industrials i tractar d’explicar aquest fenomen. Segons la hipòtesi de la Corba de Kuznets Allargada, les desigualtats salarials podrien evolucionar segons una corba en forma d’N. La U-inverida d’aquesta corba seria deguda al procés de canvi estructural que acompanya a un procés de industrialització. I l’extrem dret de la mateixa, associada al creixement explosiu de la formació de capital humà en les economies modernes i post-industrials. En aquest sentit, els principals candidats per explicar el recent augment de les desigualtats: el canvi tècnic esbiaixat a favor del treball qualificat, la globalització (comerç i migracions) i els factors institucionals, estarien ja incorporats en l’evolució de la composició de la força de treball en termes de qualificacions. La limitada evidència empírica sobre aquest tema, tendeix a donar suport a la Corba de Kuznets Allargada.
Resumo:
[cat] Les darreres dècades s’han caracteritzat per un intens augment de les desigualtats salarials a nivell mundial. Aquest article allarga la hipòtesi clàssica de la Corba de Kuznets per cobrir les economies post-industrials i tractar d’explicar aquest fenomen. Segons la hipòtesi de la Corba de Kuznets Allargada, les desigualtats salarials podrien evolucionar segons una corba en forma d’N. La U-inverida d’aquesta corba seria deguda al procés de canvi estructural que acompanya a un procés de industrialització. I l’extrem dret de la mateixa, associada al creixement explosiu de la formació de capital humà en les economies modernes i post-industrials. En aquest sentit, els principals candidats per explicar el recent augment de les desigualtats: el canvi tècnic esbiaixat a favor del treball qualificat, la globalització (comerç i migracions) i els factors institucionals, estarien ja incorporats en l’evolució de la composició de la força de treball en termes de qualificacions. La limitada evidència empírica sobre aquest tema, tendeix a donar suport a la Corba de Kuznets Allargada.
Resumo:
Se utiliza un modelo de innovaciones sesgadas para estudiar los efectos de cambios exógenos en la oferta laboral. En un contexto de innovaciones sesgadas, a medida que las economías acumulan capital, el trabajo se hace relativamente más escaso y más caro, por este motivo, hay incentivos para adoptar tecnologías ahorradoras de trabajo. Del mismo modo un cambio en la oferta laboral afecta la abundancia de factores y sus precios relativos. En general, una reducción de la oferta laboral, hace que el trabajo sea más caro y genera incentivos para cambio tecnológico ahorrador de trabajo. Así, el efecto inicial que tiene el cambio en la oferta laboral sobre los precios de los factores es mitigado por el cambio tecnológico. Finalmente, los movimientos en la remuneración a los factores afectan las decisiones de ahorro y, por lo tanto, la dinámica del crecimiento. En este trabajo se exploran las consecuencias de una reducción de la oferta laboral en dos contextos teóricos diferentes: un modelo de agentes homogéneos y horizonte infinito y un modelo de generaciones traslapadas.
Resumo:
The measurement of the impact of technical change has received significant attention within the economics literature. One popular method of quantifying the impact of technical change is the use of growth accounting index numbers. However, in a recent article Nelson and Pack (1999) criticise the use of such index numbers in situations where technical change is likely to be biased in favour of one or other inputs. In particular they criticise the common approach of applying observed cost shares, as proxies for partial output elasticities, to weight the change in quantities which they claim is only valid under Hicks neutrality. Recent advances in the measurement of product and factor biases of technical change developed by Balcombe et al (2000) provide a relatively straight-forward means of correcting product and factor shares in the face of biased technical progress. This paper demonstrates the correction of both revenue and cost shares used in the construction of a TFP index for UK agriculture over the period 1953 to 2000 using both revenue and cost function share equations appended with stochastic latent variables to capture the bias effect. Technical progress is shown to be biased between both individual input and output groups. Output and input quantity aggregates are then constructed using both observed and corrected share weights and the resulting TFPs are compared. There does appear to be some significant bias in TFP if the effect of biased technical progress is not taken into account when constructing the weights
Resumo:
Productivity growth is conventionally measured by indices representing discreet approximations of the Divisia TFP index under the assumption that technological change is Hicks-neutral. When this assumption is violated, these indices are no longer meaningful because they conflate the effects of factor accumulation and technological change. We propose a way of adjusting the conventional TFP index that solves this problem. The method adopts a latent variable approach to the measurement of technical change biases that provides a simple means of correcting product and factor shares in the standard Tornqvist-Theil TFP index. An application to UK agriculture over the period 1953-2000 demonstrates that technical progress is strongly biased. The implications of that bias for productivity measurement are shown to be very large, with the conventional TFP index severely underestimating productivity growth. The result is explained primarily by the fact that technological change has favoured the rapidly accumulating factors against labour, the factor leaving the sector. (C) 2004 Elsevier B.V. All rights reserved.
Resumo:
Includes bibliography
Resumo:
This article analyses the pattern of technical change in the Brazilian economy between 1952 and 2008. A Marx-biased pattern of labour-saving and capital-using change predominated in the period under study. Three phases in the dynamism of technical change can be distinguished, however. The first, from 1952 to 1973, was highly dynamic. In the second, from 1973 to 1991, this dynamism lessened. Lastly, between 1991 and 2008, the dynamism of technical change recovered slightly. The wage share held fairly steady throughout the period. The rate of profit dropped between 1952 and 1991 before rising slightly from 1991 to 2008. The net capital accumulation rate contracted after 1975 because of the decline in the rates of profit and investment. Between 2004 and 2008, the net capital accumulation rate increased.
Resumo:
The paper investigates the effects of trade liberalisation on the technical efficiency of the Bangladesh manufacturing sector by estimating a combined stochastic frontier-inefficiency model using panel data for the period 197894 for 25 three-digit level industries. The results show that the overall technical efficiency of the manufacturing sector as well as the technical efficiencies of the majority of the individual industries has increased over time. The findings also clearly suggest that trade liberalisation, proxied by export orientation and capital deepening, has had significant impact on the reduction of the overall technical inefficiency. Similarly, the scale of operation and the proportion of non-production labour in total employment appear as important determinants of technical inefficiency. The evidence also indicates that both export-promoting and import-substituting industries have experienced rises in technical efficiencies over time. Besides, the results are suggestive of neutral technical change, although (at the 5 per cent level of significance) the empirical results indicate that there was no technical change in the manufacturing industries. Finally, the joint test based on the likelihood ratio (LR) test rejects the Cobb-Douglas production technology as description of the database given the specification of the translog production technology.
Resumo:
This study employs stochastic frontier analysis to analyze Malaysian commercial banks during 1996-2002, and particularly focuses on determining the impact of Islamic banking on performance. We derive both net and gross efficiency estimates, thereby demonstrating that differences in operating characteristics explain much of the difference in costs between Malaysian banks. We also decompose productivity change into efficiency, technical, and scale change using a generalised Malmquist productivity index. On average, Malaysian banks experience moderate scale economies and annual productivity change of 2.68 percent, with the latter driven primarily by technical change, which has declined over time. Our gross efficiency estimates suggest that Islamic banking is associated with higher input requirements. However, our productivity estimates indicate that full-fledged Islamic banks have overcome some of these cost disadvantages with rapid technical change, although this is not the case for conventional banks operating Islamic windows. Merged banks are found to have higher input usage and lower productivity change, suggesting that bank mergers have not contributed positively to bank performance. Finally, our results suggest that while the East Asian financial crisis had a short-term cost-reducing effect in 1998, the crisis triggered a more lasting negative impact by increasing the volume of non-performing loans.
Resumo:
New techniques in manufacturing, popularly referred to as mechanization and automation, have been a preoccupation of social and economic theorists since the industrial revolution. A selection of relevant literature is reviewed, including the neoclassical economic treatment of technical change. This incorporates alterations to the mathematical production function and an associated increase in the efficiency with which the factors of production are converted into output. Other work emphasises the role of research and development and the process of diffusion, whereby new production techniques are propagated throughout industry. Some sociological writings attach importance to the type of production technology and its effect on the organisational structure and social relations within the factory. Nine detailed case studies are undertaken of examples of industrial innovation in the rubber, automobile, vehicle components, confectionery and clothing industries. The old and new techniques are compared for a range of variables, including capital equipment, labour employed, raw materials used, space requirements and energy consumption, which in most cases exhibit significant change with the innovation. The rate of output, labour productivity, product quality, maintenance requirements and other aspects are also examined. The process by which the change in production method was achieved is documented, including the development of new equipment and the strategy of its introduction into the factory, where appropriate. The firm, its environment, and the attitude of different sectors of the workforce are all seen to play a part in determining the motives for and consequences which flow from the innovations. The traditional association of technical progress with its labour-saving aspect, though an accurate enough description of the cases investigated, is clearly seen to afford an inadequate perspective for the proper understanding of this complex phenomenon, which also induces change in a wide range of other social, economic and technical variables.
Resumo:
This study employs Stochastic Frontier Analysis (SFA) to analyse Malaysian commercial banks during 1996–2002, and particularly focuses on determining the impact of Islamic banking on performance. We derive both net and gross efficiency estimates, thereby demonstrating that differences in operating characteristics explain much of the difference in costs between Malaysian banks. We also decompose productivity change into efficiency, technical, and scale change using a generalized Malmquist productivity index. On average, Malaysian banks experience moderate scale economies and annual productivity change of 2.68%, with the latter driven primarily by Technical Change (TC), which has declined over time. Our gross efficiency estimates suggest that Islamic banking is associated with higher input requirements. However, our productivity estimates indicate that full-fledged Islamic banks have overcome some of these cost disadvantages with rapid TC, although this is not the case for conventional banks operating Islamic windows. Merged banks are found to have higher input usage and lower productivity change, suggesting that bank mergers have not contributed positively to bank performance. Finally, our results suggest that while the East Asian financial crisis had a short-term costreducing effect in 1998, the crisis triggered a long-lasting negative impact by increasing the volume of nonperforming loans.