Associação genética entre características indicadoras de temperamento e de precocidade sexual em fêmeas da raça Nelore

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação do efeito de um programa de ensino de leitura e escrita sobre a fala de crianças usuárias de implante coclear

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise da viabilidade econômica na implantação de inversores frequência em sistemas de bombeamento

The present work aims to conduct a study of the economic feasibility of the implementation of variable frequency inverters in pump systems with variable flow rates. The concern with the reduction of energy expenditure in industries raised in 2001 due to the energy crisis that hit Brazil at that time, forcing industries to reduce their electric costs under penalty of fines if this were not done (MOREIRA, 2008). Frequency inverter is an electronic device that allow greater control in the operation of pumping systems and also a reduction in electrical consumption, being a viable solution to achieve a reduction in energy consumption. For the development of this work, approaching important topics in pumping systems was necessary in order to make a correct choice of hydraulic pumping and also other components responsible for the operation of the system , such as electric motors and frequency inverters. In the case study, a theoretical analysis of the behavior of electrical consumption in systems with variable flow rates was performed, comparing when the system is operated via frequency inverters and when the system is operated without such a device. As expected, the result of the implantation of the device was quite satisfactory, and the primary goal of reducing energy expenditure was achieved. Also important to highlight the environmental issue of this work, as all forms of energy production affects nature in some way, achieving a reduction in consumption also contributes indirectly in environmental conservation

The study of cardiovascular risk in adolescents - ERICA: rationale, design and sample characteristics of a national survey examining cardiovascular risk factor profile in Brazilian adolescents

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Quantitative assessment of the intensity of palmar and plantar sweating in patients with primary palmoplantar hyperhidrosis

Objective: To compare individuals with and without hyperhidrosis in terms of the intensity of palmar and plantar sweating. Methods: We selected 50 patients clinically diagnosed with palmoplantar hyperhidrosis and 25 normal individuals as controls. We quantified sweating using a portable noninvasive electronic device that has relative humidity and temperature sensors to measure transepidermal water loss. All of the individuals had a body mass index of 20-25 kg/cm(2). Subjects remained at rest for 20-30 min before the measurements in order to reduce external interference. The measurements were carried out in a climate-controlled environment (21-24 degrees C). Measurements were carried out on the hypothenar region on both hands and on the medial plantar region on both feet. Results: In the palmoplantar hyperhidrosis group, the mean transepidermal water loss on the hands and feet was 133.6 +/- 51.0 g/m(2)/h and 71.8 +/- 40.3 g/m(2)/h, respectively, compared with 37.9 +/- 18.4 g/m(2)/h and 27.6 +/- 14.3 g/m(2)/h, respectively, in the control group. The differences between the groups were statistically significant (p < 0.001 for hands and feet). Conclusions: This method proved to be an accurate and reliable tool to quantify palmar and plantar sweating when performed by a trained and qualified professional.

Cochlear implant in postlingual children: functional results 10 years after the surgery

The benefits of cochlear implants (CI) for communication skills are obtained over the years. There are but a few studies regarding the long-term outcomes in postlingual deaf children who grew up using the electronic device. Aim: To assess the functional results in a group of postlingual children, 10 years after using a CI. Methods: Ten postlingual deaf children, implanted before 18 years of age, participated in this study. We assessed: sentence recognition and speech intelligibility. We documented: device use and function and the patient's academic/occupational status. Study design: series. Results: The mean scores were 73% for sentence recognition in silence and 40% in noise. The average write-down intelligibility score was 92% and the average rating-scale intelligibility score was 4.15. There were no cases of device failure. Regarding educational/vocational status, three subjects graduated from the University. Five quit education after completing high school. Eight subjects had a professional activity. Conclusion: This study showed that cochlear implantation is a safe and reliable procedure. The postlingual profoundly hearing-impaired children after 10 years of CI use developed satisfactory levels regarding speech perception and intelligibility, and completed at least high school and were inserted in the labor market. Clinical Trials Registry: NCT01400178.

Haplotypes of susceptibility to chronic periodontitis in the Interleukin 8 gene do not influence protein level in the gingival crevicular fluid

Objective: Previously, we identified that the ATC/TTC haplotype formed by polymorphisms in the Interleukin-(IL)8 gene conferred susceptibility to chronic periodontitis (CP). The aim of the study was to investigate whether the IL8 haplotype ATC/TTC was associated with the volume of gingival crevicular fluid (GCF), the concentration of interleukin IL-8 in the GCF, as well as periodontal conditions in patients with CP in comparison to controls without CP. Methods: Seventy-nine individuals (CP: n = 41, controls: n = 38) were grouped according to the presence (susceptible for CP) or absence (not susceptible for CP) of the IL8 ATC/TTC haplotype. After periodontal clinical evaluation, they were subdivided by the presence or absence of CP. GCF was collected from each patient and the IL-8 levels were determined by ELISA. The GCF volume of each subject was measured by means of a calibrated electronic device. Comparisons of means between carriers and non-carriers of the ATC/TTC haplotype were evaluated using the Mann-Whitney test. Linear regression and stepwise linear regression analysis were used to analyse the association of the GCF volume with potential covariates and their contribution for the phenotype. Results: We did not find significant differences of both periodontal conditions and IL-8 concentration in the GCF of patients with the presence or absence of the IL8 ATC/TTC haplotype. However, the GCF volume was significantly higher amongst the patients affected by CP that are absent for the IL8 ATC/TTC haplotype. In addition, linear regression analysis showed a statistically significant association between GCF volume and CP, IL8 haplotype ATC/TTC and IL-8 concentration. Conclusions: The IL8 haplotype of susceptibility to CP was neither associated with IL-8 cytokine levels nor with clinical periodontal parameters. Also, CP, IL8 haplotype and IL-8 concentration showed a positive association with the GCF volume levels in the studied patients. (c) 2012 Published by Elsevier Ltd.

Nano-fabrication of complex functional structures using non- conventional lithography

In Chapter 1 I will present a brief introduction on the state of art of nanotechnologies, nanofabrication techniques and unconventional lithography as a technique to fabricate the novel electronic device as resistive switch so-called memristor is shown. In Chapter 2 a detailed description of the main fabrication and characterization techniques employed in this work is reported. Chapter 3 parallel local oxidation lithography (pLOx) describes as a main technique to obtain accurate patterning process. All the effective parameters has been studied and the optimized condition observed to highly reproducible with excellent patterned nanostructures. The effect of negative bias, calls local reduction (LR) studied. Moreover, the use of AC bias shows faster patterning process respect to DC bias. In Chapter 4 (metal/ e-SiO2/ Si nanojunction) it is shown how the electrochemical oxide nanostructures by using pLOx can be used in the fabrication of novel devices call memristor. We demonstrate a new concept, based on conventional materials, where the lifetime problem is resolved by introducing a “regeneration” step, which restores the nano-memristor to its pristine condition by applying an appropriate voltage cycle. In Chapter 5 (Graphene/ e-SiO2/ Si), Graphene as a building block material is used as an electrode to selectively oxidize the silicon substrate by pLOx set up for the fabrication of novel resistive switch device. In Chapter 6 (surface architecture) I will show another application of pLOx in biotechnology is shown. So the surface functionalization combine with nano-patterning by pLOx used to design a new surface to accurately bind biomolecules with the possibility of studying those properties and more application in nano-bio device fabrication. So, in order to obtain biochips, electronic and optical/photonics devices Nano patterning of DNA used as scaffolds to fabricate small functional nano-components.

Electrical spectroscopy of rubrene bulk and thin film crystals

One of the most diffused electronic device is the field effect transistor (FET), contained in number of billions in each electronic device. Organic optoelectronics is an emerging field that exploits the unique properties of conjugated organic materials to develop new applications that require a combination of performance, low cost and processability. Organic single crystals are the material with best performances and purity among the variety of different form of organic semiconductors. This thesis is focused on electrical and optical characterization of Rubrene single crystal bulk and thin films. Rubrene bulk is well known but for the first time we studied thin films. The first Current-voltage characterization has been performed for the first time on three Rubrene thin films with three different thickness to extract the charge carriers mobility and to assess its crystalline structure. As results we see that mobility increase with thickness. Field effect transistor based on Rubrene thin films on $SiO_2$ have been characterize by current-voltage (I-V) analyses (at several temperatures) and reveals a hopping conduction. Hopping behavior probably is due to the lattice mismatch with the substrate or intrinsic defectivity of the thin films. To understand effects of contact resistance we tested thin films with the Transmission Line Method (TLM) method. The TLM method revealeds that contact resistance is negligible but evidenced a Schottky behavior in a limited but well determined range of T. To avoid this effect we carried out annealing treatment after the electrode evaporation iswe performed a compete I-V characterization as a function of in temperature to extract the electronic density of states (DOS) distribution through the Space Charge Limited Current (SCLC) method. The results show a DOS with an exponential trenddistribution, as expected. The measured mobility of thin films is about 0.1cm^2/Vs and it increases with the film thickness. Further studies are necessary to investigate the reason and improve performances. From photocurrent spectrum we calculated an Eg of about 2.2eV and both thin films and bulk have a good crystal order. Further measurement are necessary to solve some open problems

Quantum transport in a single molecular junction

The craze for faster and smaller electronic devices has never gone down and this has always kept researchers on their toes. Following Moore’s law, which states that the number of transistors in a single chip will double in every 18 months, today “30 million transistors can fit into the head of a 1.5 mm diameter pin”. But this miniaturization cannot continue indefinitely due to the ‘quantum leakage’ limit in the thickness of the insulating layer between the gate electrode and the current carrying channel. To bypass this limitation, scientists came up with the idea of using vastly available organic molecules as components in an electronic device. One of the primary challenges in this field was the ability to perform conductance measurements across single molecular junctions. Once that was achieved the focus shifted to a deeper understanding of the underlying physics behind the electron transport across these molecular scale devices. Our initial theoretical approach is based on the conventional Non-Equilibrium Green Function(NEGF) formulation, but the self-energy of the leads is modified to include a weighting factor that ensures negligible current in the absence of a molecular pathway as observed in a Mechanically Controlled Break Junction (MCBJ) experiment. The formulation is then made parameter free by a more careful estimation of the self-energy of the leads. The calculated conductance turns out to be atleast an order more than the experimental values which is probably due to a strong chemical bond at the metal-molecule junction unlike in the experiments. The focus is then shifted to a comparative study of charge transport in molecular wires of different lengths within the same formalism. The molecular wires, composed of a series of organic molecules, are sanwiched between two gold electrodes to make a two terminal device. The length of the wire is increased by sequentially increasing the number of molecules in the wire from 1 to 3. In the low bias regime all the molecular devices are found to exhibit Ohmic behavior. However, the magnitude of conductance decreases exponentially with increase in length of the wire. In the next study, the relative contribution of the ‘in-phase’ and the ‘out-of-phase’ components of the total electronic current under the influence of an external bias is estimated for the wires of three different lengths. In the low bias regime, the ‘out-of-phase’ contribution to the total current is minimal and the ‘in-phase’ elastic tunneling of the electrons is responsible for the net electronic current. This is true irrespective of the length of the molecular spacer. In this regime, the current-voltage characteristics follow Ohm’s law and the conductance of the wires is found to decrease exponentially with increase in length which is in agreement with experimental results. However, after a certain ‘off-set’ voltage, the current increases non-linearly with bias and the ‘out-of-phase’ tunneling of electrons reduces the net current substantially. Subsequently, the interaction of conduction electrons with the vibrational modes as a function of external bias in the three different oligomers is studied since they are one of the main sources of phase-breaking scattering. The number of vibrational modes that couple strongly with the frontier molecular orbitals are found to increase with length of the spacer and the external field. This is consistent with the existence of lowest ‘off-set’ voltage for the longest wire under study.

Integrated phased array transducer for on-board structural health monitoring

Permanently bonded onto a structure, an integrated Phased Array (PhA II) transducer that can provide reliable electromechanical connection with corresponding sophisticated miniaturized ?all in one? SHM electronic device installed directly above it, without need for any interface cabling, during all aerospace structure lifecycle phases and for a huge variety of real harsh service environments of structures to be monitored is presented. This integrated PhA II transducer [1], as a key component of the PAMELA SHM? (Phased Array Monitoring for Enhanced Life Assessment) system, has two principal tasks at the same time, reliably transceive elastic waves in real aerospace service environments and serves as a reliable sole carrier or support for associated integrated on-board SHM electronic device attached above. The PhA II transducer successfully accomplished both required task throughout extensive test campaigns which included low to high temperature tests, temperature cycling, mechanical loading, combined thermo- mechanical loading and vibration resistance, etc. both with and without SHM device attached above due to RTCA DO-160F.

Instrumentación de referencia para realización automática de ensayos de fiabilidad

En todo proceso de desarrollo de un dispositivo electrónico o equipo cabe la necesidad de evaluar la fiabilidad de sus componentes, es decir, cual es el porcentaje de equipos que tras un determinado periodo de vida mantiene todas sus funcionalidades dentro de especificaciones. La evaluación de la fiabilidad mediante ensayos acelerados es la herramienta que permite una estimación de la vida del dispositivo o equipo de forma previa a su comercialización. La cuantificación de la fiabilidad es crítica para identificar los costos de un determinado periodo de garantía, y para ofrecer a los clientes el nivel de calidad deseado. El objetivo de este Proyecto Fin de Carrera, es el diseño de un sistema automático de instrumentación versátil, para la realización y caracterización de ensayos acelerados, el cual nos sirva para abordar una amplia gama de ensayos con los que evaluar la fiabilidad de los dispositivos electrónicos o equipos. Además del uso industrial donde se evaluará la fiabilidad de forma previa a la comercialización, este sistema se podrá emplear en la docencia de esta área, y fundamentalmente para la realización de ensayos acelerados en investigación de dispositivos electrónicos. La versatilidad de nuestro hardware y aplicación software es un punto a favor, ya que con este sistema de instrumentación se pueden realizar numerosos tipos de ensayos acelerados, sin el problema de tener que cambiar toda la instrumentación, cada vez que se quiera realizar otro ensayo distinto. Los componentes que se elijan para realizar el ensayo acelerado, serán sometidos a un estrés (tensión, corriente, humedad, temperatura…) y se podrá ir observando cómo envejecen, lo que nos permite evaluar la vida del dispositivo en un corto periodo, emulando sus condiciones de trabajo, además de estudiar la fiabilidad también se puede identificar como se degradan sus características principales antes del fallo. El Software utilizado en este Proyecto se ha implementado con un lenguaje de programación gráfico para instrumentación, LabVIEW. La aplicación software se explica de manera muy detallada a lo largo de la memoria, para que su uso y adaptación si fuese necesario no suponga ningún problema para el usuario. En la última parte de esta memoria se encuentra la guía de usuario y un ensayo acelerado planteado como ejemplo. Explicaremos como se han interconectado los equipos a los componentes en los que se va a realizar el ensayo y así se comprobará el correcto funcionamiento del software tomando las medidas necesarias. ABTRACT In all process of development of an electronic device or equipment, we have the need to evaluate the reliability of its components, that is to say, what percentage of equipment that after a certain period of life keeps all of its functionalities within specifications. The evaluation of reliability by means of accelerated tests is the tool that allows an estimation of the lifetime of the device or equipment prior to its marketing. The quantification of reliability is critical to identify the costs of a specific warranty period, and to offer customers the desired quality level. The objective of this Thesis is the design of an automatic very versatile instrument for the realization and characterization of accelerated tests, which will help us to address a wide range of tests to assess the reliability of the devices or electronic equipment. In addition to industrial use where test the reliability before its commercialization, use it can be used in teaching of this area, fundamentally for the realization of accelerated testing in the investigation of electronic devices. The versatility of our hardware and software implementation is a plus, given that this instrumentation system can perform numerous types of accelerated tests, without the problem to have to change everything, every time you want to make another different test. The components that will be chosen to perform the accelerated test, will be subjected to stress (voltage, current, humidity, temperature ...) and you can observe how they age, allowing us to evaluate the life of the device in a short period, emulating their working conditions. In addition to studying the reliability it can also identify how its main characteristics are degraded before failure. The software used in this Thesis has been implemented with a graphical programming language for instrumentation, LabVIEW. This software is explained in great detail throughout the Thesis, so that its use and adaptation, if necessary, will not be a problem for the user. In the last part of this memory we will expose a user guide and test that we have done. We will explain how the equipment has been interconnected to the components in which we are going to perform the test and so we will check the correct operation of the software taking the necessary measures.

Sistema de control de tracción y salida para un monoplaza de la Fórmula SAE

En este proyecto de final de carrera se detalla el proceso de diseño, fabricación, montaje y ajuste de un dispositivo electrónico que sirva como sistema de control de tracción de un vehículo y que acoplaremos sobre un monoplaza de carreras que participa en la competición Formula SAE. La Formula SAE (Society of Automotive Engineers - Sociedad de Ingenieros de Automoción), es una competición de coches de carreras monoplaza a nivel universitario que promueve el desarrollo de la ingeniera aplicada a la automoción. Se pretende que este libro sirva de guía para el correcto manejo y desempeño del sistema fabricado. Además se ha pretendido que su lectura resulte fácil y comprensible para que la persona que lea este libro sea capaz de entender el sistema realizado para así poderlo mejorar. Gracias a la colaboración entre la Escuela Técnica Superior de Ingeniería y Sistemas de Telecomunicación (ETSIST) de la Universidad Politécnica de Madrid (UPM), la Escuela de Ingenieros Industriales de esta misma Universidad (ETSII) y el Instituto Universitario de Investigación del Automóvil (INSIA), se sientan las bases de una plataforma docente en la cual se posibilita la formación y desarrollo de un vehículo tipo formula que participa en la ya mencionada competición Formula SAE. Para ello, se formo en el 2003 el equipo UPMRacing, primer representante español en el evento. El equipo se compone de más de 50 alumnos de la UPM y del Máster de Ingeniería en Automoción del INSIA. Es por tanto, en el vehículo fabricado por el equipo UPMRacing, en el que se pretende instalar este sistema de control de tracción. El control de tracción es un sistema de seguridad del automóvil diseñado para prevenir la perdida de adherencia cuando alguna rueda presenta deslizamiento, bien porque el conductor se excede en la aceleración o bien porque el firme este resbaladizo. La unidad de procesamiento del sistema de control de tracción fabricado lee la velocidad de cada rueda del vehículo mediante unos sensores y determina si existe deslizamiento, en tal caso, manda una señal a la centralita para disminuir la potencia hasta que el deslizamiento disminuya a unos valores controlados. El sistema cuenta con un control remoto que sirve como interfaz para que el piloto pueda manejarlo. Por ultimo, el dispositivo es capaz de conectarse a un bus de comunicaciones CAN para configurar ciertos parámetros. El objetivo del sistema es, básicamente, hacer que el coche no derrape en aceleraciones fuertes; concretamente en las salidas desde parado y al tomar una curva, aumentando así la velocidad en circuito y la seguridad del piloto. ABSTRACT. The purpose of this project is to describe the design, manufacture, assembly and adjustment processes of an electronic device acting as the traction control system (TCS) of a vehicle, that we will attach to a single-seater competition formula SAE car. The Formula SAE (Society of Automotive Engineers) is a graduate-level singleseater racing car competition promoting the development of automotive applied engineering. We also intend this work to serve as a technical user guide of the manufactured system. It is drafted clearly and concisely so that it will be easy for all those to whom it is addressed to understand and subject to further improvements. The close partnership among the Escuela Técnica Superior de Ingeniería y Sistemas de Telecomunicación (ETSIST), Escuela de Ingenieros Industriales (ETSII) of Universidad Politécnica de Madrid (UPM), and the Instituto Universitario de Investigación del Automóvil (INSIA), lays the foundation of a teaching platform enabling the training and development of a single-seater racing car taking part in the already mentioned Formula SAE competition. In this respect, UPMRacing team was created back in 2003, first spanish representative in this event. The team consists of more than 50 students of the UPM and of INSIA Master in Automotive Engineering. It is precisely the vehicle manufactured by UPMRacing team where we intend to install our TCS. TCS is an automotive safety system designed to prevent loss of traction when one wheel has slip, either because the driver exceeds the acceleration or because the firm is slippery. The device’s central processing unit is able to detect the speed of each wheel of the vehicle via special sensors and to determine wheel slip. If this is the case, the system sends a signal to the ECU of the vehicle to reduce the power until the slip is also diminished to controlled values. The device has a remote control that serves as an interface for the pilot to handle it. Lastly, the device is able to connect to a communication bus system CAN to set up certain parameters. The system objective is to prevent skidding under strong acceleration conditions: standing-start from the starting grid or driving into a curve, increasing the speed in circuit and pilot’s safety.

Desarrollo del teclado virtual “Mokey” basado en gestos para personas con movilidad reducida: capa de sistema

La Realidad Aumentada forma parte de múltiples proyectos de investigación desde hace varios años. La unión de la información del mundo real y la información digital ofrece un sinfín de posibilidades. Las más conocidas van orientadas a los juegos pero, gracias a ello, también se pueden implementar Interfaces Naturales. En otras palabras, conseguir que el usuario maneje un dispositivo electrónico con sus propias acciones: movimiento corporal, expresiones faciales, etc. El presente proyecto muestra el desarrollo de la capa de sistema de una Interfaz Natural, Mokey, que permite la simulación de un teclado mediante movimientos corporales del usuario. Con esto, se consigue que cualquier aplicación de un ordenador que requiera el uso de un teclado, pueda ser usada con movimientos corporales, aunque en el momento de su creación no fuese diseñada para ello. La capa de usuario de Mokey es tratada en el proyecto realizado por Carlos Lázaro Basanta. El principal objetivo de Mokey es facilitar el acceso de una tecnología tan presente en la vida de las personas como es el ordenador a los sectores de la población que tienen alguna discapacidad motora o movilidad reducida. Ya que vivimos en una sociedad tan informatizada, es esencial que, si se quiere hablar de inclusión social, se permita el acceso de la actual tecnología a esta parte de la población y no crear nuevas herramientas exclusivas para ellos, que generarían una situación de discriminación, aunque esta no sea intencionada. Debido a esto, es esencial que el diseño de Mokey sea simple e intuitivo, y al mismo tiempo que esté dotado de la suficiente versatilidad, para que el mayor número de personas discapacitadas puedan encontrar una configuración óptima para ellos. En el presente documento, tras exponer las motivaciones de este proyecto, se va a hacer un análisis detallado del estado del arte, tanto de la tecnología directamente implicada, como de otros proyectos similares. Se va prestar especial atención a la cámara Microsoft Kinect, ya que es el hardware que permite a Mokey detectar la captación de movimiento. Tras esto, se va a proceder a una explicación detallada de la Interfaz Natural desarrollada. Se va a prestar especial atención a todos aquellos algoritmos que han sido implementados para la detección del movimiento, así como para la simulación del teclado. Finalmente, se va realizar un análisis exhaustivo del funcionamiento de Mokey con otras aplicaciones. Se va a someter a una batería de pruebas muy amplia que permita determinar su rendimiento en las situaciones más comunes. Del mismo modo, se someterá a otra batería de pruebas destinada a definir su compatibilidad con los diferentes tipos de programas existentes en el mercado. Para una mayor precisión a la hora de analizar los datos, se va a proceder a comparar Mokey con otra herramienta similar, FAAST, pudiendo observar de esta forma las ventajas que tiene una aplicación especialmente pensada para gente discapacitada sobre otra que no tenía este fin. ABSTRACT. During the last few years, Augmented Reality has been an important part of several research projects, as the combination of the real world and the digital information offers a whole new set of possibilities. Among them, one of the most well-known possibilities are related to games by implementing Natural Interfaces, which main objective is to enable the user to handle an electronic device with their own actions, such as corporal movements, facial expressions… The present project shows the development of Mokey, a Natural Interface that simulates a keyboard by user’s corporal movements. Hence, any application that requires the use of a keyboard can be handled with this Natural Interface, even if the application was not designed in that way at the beginning. The main objective of Mokey is to simplify the use of the computer for those people that are handicapped or have some kind of reduced mobility. As our society has been almost completely digitalized, this kind of interfaces are essential to avoid social exclusion and discrimination, even when it is not intentional. Thus, some of the most important requirements of Mokey are its simplicity to use, as well as its versatility. In that way, the number of people that can find an optimal configuration for their particular condition will grow exponentially. After stating the motivations of this project, the present document will provide a detailed state of the art of both the technologies applied and other similar projects, highlighting the Microsoft Kinect camera, as this hardware allows Mokey to detect movements. After that, the document will describe the Natural Interface that has been developed, paying special attention to the algorithms that have been implemented to detect movements and synchronize the keyboard. Finally, the document will provide an exhaustive analysis of Mokey’s functioning with other applications by checking its behavior with a wide set of tests, so as to determine its performance in the most common situations. Likewise, the interface will be checked against another set of tests that will define its compatibility with different softwares that already exist on the market. In order to have better accuracy while analyzing the data, Mokey’s interface will be compared with a similar tool, FAAST, so as to highlight the advantages of designing an application that is specially thought for disabled people.

Habilidades auditivas e de linguagem de crianças usuárias de implante coclear: análise dos marcadores clínicos de desenvolvimento

INTRODUÇÃO: Os marcadores clínicos de desenvolvimento possibilitam aos profissionais se familiarizarem com a sequência do desenvolvimento das habilidades auditivas e de linguagem e sinalizarem para a família quando há algum padrão desviante do esperado para o desenvolvimento da criança. O objetivo da presente pesquisa foi determinar os marcadores clínicos de desenvolvimento das habilidades auditivas e de linguagem falada, a partir da análise dos primeiros cinco anos de uso do IC de crianças implantadas antes dos 36 meses; e investigar a influência da idade de implantação no desenvolvimento das habilidades citadas. MÉTODOS: Estudo longitudinal retrospectivo realizado na Seção de Implante Coclear - Centro de Pesquisas Audiológicas (CPA-HRAC/USP). Fizeram parte da amostra 230 crianças que, para análise comparativa, foram dividas em três grupos: operadas e ativadas antes dos 18 meses, entre 19 e 24 meses e entre 25 e 36 meses de idade. Os procedimentos analisados foram: a Infant-Toddler: Meaningful Auditory Integration Scale (IT-MAIS), a Meaningful Use of Speech Scale (MUSS) e as Categorias de Audição e de Linguagem. Os dados coletados foram analisados por meio das estatísticas descritiva e indutiva. RESULTADOS: Durante os primeiros cinco anos de uso do IC foram analisados nove retornos das crianças ao Centro. A partir da análise da mediana, até os 30 ± 3 meses de uso do dispositivo eletrônico grande parte da amostra atingiu 100% na IT-MAIS, quando as habilidades de atenção e de atribuição dos significados aos sons já estavam superadas. Até os 68 ± 6 meses a maioria das crianças alcançou a porcentagem máxima na MUSS e a pontuação máxima nas Categorias de Audição e de Linguagem, ou seja, as crianças já utilizavam a fala espontânea e as estratégias de comunicação em sua rotina, bem como apresentavam as habilidades de reconhecimento auditivo em conjunto aberto e a fluência da linguagem oral, respectivamente. Quando comparados os desempenhos dos grupos, nas avaliações auditivas não houve um padrão de significância estatística e nas avaliações da linguagem os resultados foram significativamente melhores para as crianças implantadas após os 18 meses nos primeiros retornos. Houve fortes correlações entre os resultados das Escalas e Categorias. CONCLUSÕES: As crianças da amostra desenvolveram progressivamente as habilidades auditivas e de linguagem falada ao longo dos primeiros cinco anos de uso do IC. Foi possível determinar os marcadores clínicos de desenvolvimento para as Escalas e Categorias estudadas. A partir deles os profissionais que acompanham a criança no processo de habilitação auditiva, poderão nortear a família, bem como os demais profissionais que atuam com a criança, quanto aos resultados esperados na IT-MAIS, na MUSS e nas Categorias de Audição e Linguagem. Também, foi possível identificar que, mesmo havendo uma restrição quanto as possíveis variáveis que podem interferir na determinação dos marcadores clínicos, houve pacientes com resultados desviantes, sugerindo a importância da definição dos marcadores para, juntamente com a família, o profissional discutir e encontrar outras variáveis que possam influenciar no baixo desempenho da criança. A implantação dentro do período sensível do desenvolvimento pode explicar comportamento auditivo dos grupos quando comparados. Já, quando analisada a linguagem falada, acredita-se que houve a influência de outras variáveis no processo de habilitação auditiva e não apenas a implantação durante o período crítico