ENERGY-LEVEL CALCULATIONS OF THE RECONSTRUCTED 90-DEGREES PARTIAL DISLOCATION IN SILICON

An LCAO scheme taking into account 10 atomic orbitals (s-, p-, and d-type) applied to a supercell containing 256 atoms is used to calculate the bound states of the reconstructed 90-degrees partial dislocation in Si. The results differ significantly from our earlier calculations on the unreconstructed 90-degrees partial using the same method. We find two bands separate from each other in the entire Brillouin zone and the upper band penetrates deep into the indirect band gap which is in contradiction with the general opinion that core reconstruction clears the band gap of dislocation states.

ELECTRON-STATES OF A VACANCY IN THE CORE OF THE 90-DEGREES PARTIAL DISLOCATION IN SILICON

An LCAO scheme (linear combination of atomic orbitals) taking into account ten atomic orbitals (s-, p-, and d-type) is used to calculate the electronic structure of a vacancy present in the core of the reconstructed 90 degrees partial dislocation in silicon. The levels in the band gap are extracted using Lanczos' algorithm and a continued fraction representation of the local density of states. The three-fold degenerate stale of the ideal vacancy is split into three levels with energies 0.26, 1.1, and 1.9 eV measured from the valence band edge.

Atomistic studies of <110] screw dislocation core structures and glide in γ-TiAl

The core structure of <110] superdislocations in L10 TiAl was investigated with a view to clarifying their dissociation abilities and the mechanisms by which they may become sessile by self-locking. A detailed knowledge of the fine structure of dislocations is essential in analysing the origin of the various deformation features. Atomistic simulation of the core structure and glide of the screw <110] superdislocation was carried out using a bond order potential for ?-TiAl. The core structure of the screw <110] superdislocation was examined, starting with initial unrelaxed configurations corresponding to various dislocation dissociations discussed in the literature. The superdislocation was found to possess in the screw orientation either planar (glissile) or non-planar (sessile) core structures. The response of the core configurations to externally applied shear stress was studied. Some implications were considered of the dissociated configurations and their response to externally applied stress on dislocation dynamics, including the issue of dislocation decomposition, the mechanism of locking and the orientation dependence of the dislocation substructure observed in single-phase ?-TiAl. An unexpectedly rich and complex set of candidate core structures, both planar and non-planar, was found, the cores of which may transform under applied stress with consequent violation of Schmid's law.

Threading dislocation lines in two-sided flux-array decorations

Two-sided flux decoration experiments indicate that threading dislocation lines (TDLs), which cross the entire film, are sometimes trapped in metastable states. We calculate the elastic energy associated with the meanderings of a TDL. The TDL behaves as an anisotropic and dispersive string with thermal fluctuations largely along its Burgers vector. These fluctuations also modify the structure factor of the vortex solid. Both effects can, in principle, be used to estimate the elastic moduli of the material.

A rare structure at the syntax-discourse interface: heritage and Spanish-dominant native speakers weigh in

The present study examines knowledge of the discourse-appropriateness of Clitic Right Dislocation (CLRD) in a population of Heritage (HS) and Spanish-dominant Native Speakers in order to test the predictions of the Interface Hypothesis (IH; Sorace 2011). The IH predicts that speakers in language contact situations will experience difficulties with integrating information involving the interface of syntax and discourse modules. CLRD relates a dislocated constituent to a discourse antecedent, requiring integration of syntax and pragmatics. Results from an acceptability judgment task did not support the predictions of the IH. No statistical differences between the HSs’ performance and that of L1-dominant native speakers were evidenced when participants were presented with an offline task. Thus, our study did not find any evidence of “incomplete acquisition” (Montrul 2008) as it pertains to this specific linguistic structure.

Geographical dislocation and adjustment in university students: the impact of attachment, autonomy and coping behaviour on stress and well-being

The relative contribution of geographical dislocation, attachment styles, coping behaviours, and autonomy, to successful student adjustment, was examined in relation to stress and well-being. A sample of 142 on campus first year university students, across four Victorian university campuses completed self-report questionnaires. Questionnaires included demographic, social network, intrapsychic (attachment and autonomy), and coping variables. Multiple regression analysis revealed that being female, not having made a friend to confide in personal matters, lower achieved autonomy, and use of emotion-focused coping predicted higher levels of student stress. A second multiple regression analysis revealed that living away from home, and preferring others to approach oneself to initiate conversation or friendships predicted lower well-being, whilst increased frequency of phone and email contact, and greater secure parent and peer attachment, predicted greater well-being. Pearson's correlations indicated that securely attached students used more problem focused coping and social support, whereas insecurely attached students used more emotion focused coping. Qualitative data indicated student concerns about being away from family and friends, finance, course direction and structure, social opportunities on campus, and generally adjusting to the university culture. It was concluded that first year on-campus students would benefit from program initiatives targeting enhancement of on-campus social opportunities, development of autonomy, problem focused coping behaviour, interpersonal and social assertiveness.

Effect of bake-hardening on the structure-property relationship of multiphase steels for the automotive industry

The effect of a bake-hardening (BH) treatment on the microstructure and mechanical properties has been studied in C-Mn-Si TRansformation Induced Plasticity (TRIP) and Dual Phase (DP) steels after: (i) thermomechanical processing (TMP) and (ii) intercritical annealing (IA). The steels were characterized using X-ray diffraction, transmission electron microscopy (TEM) and three-dimensional atom probe tomography (APT). All steels showed high BH response. however, the DP and trip steels after IA/BH showed the appearance of upper and lower yield points, while the stress-strain behavior of the trip steel after TMP/BH was still continuous. This was due to the higher volume fraction of bainite and more stable retained austenite in the TMP/BH steel, the formation of plastic deformation zones with high dislocation density around the "as-quenched” martensite and “TRIP” martensite in the IA/BH DP steel and IA/BH TRIP steel, respectively.

Information structure and the flow of translation

Translators are often recommended to highly observe the natural flow of the target language of the translated texts. The use and order of discoursal aspects of texts such as thematic information, topical elements, left-dislocation, and passive voice, among others, which constitute information structure may sometimes conflict with this viewpoint. It is argued that such discoursal elements are determinant in understanding the flow of the texts in the source language and should not, therefore, be frequently switched around in the translated texts to fit the norm of the target language. The order of these linguistic elements should be maximally maintained when translating a text into a target language. It is after all the employment of such information structure units by the writer of the source text which is significant at any given point in discourse both cognitively, when processing the text, and interactionally, when communicating with the reader.

Information structure and the flow of translation

Translators often follow the established conventions of translations set out by founders like Nida and Taber (1969) or Newmark (1988). The principal convention, one could say, is to adhere to the source text in form and meaning. Another major convention is to keep the flow of the translated text natural, often referred to as ‘readability’ (Baker and Saldanha, 2009; Hatim and Munday, 2004). These two conventions are hard to go together, and one of them is often flouted. To maintain the same position of discoursal elements or information structure of the source text which include thematic information, left-dislocation, contrastiveness, and passive voice in the translated text is not an easy task. This exacerbates the task especially if the source and the target language have different typological features. This paper argues that discoursal elements are determinant in understanding the flow of the texts in the source language and should not, therefore, be frequently switched around in the translated texts to fit the norm of the target language. The order of these information structure elements should be maximally maintained when translating a text into a target language. It is after all the employment of such information structure units by the writer of the source text which is significant at any given point in discourse both cognitively, when processing the text, and interactionally, when communicating with the reader.

Determination of a misfit dislocation complex in SiGe/Si heterostructures by image deconvolution technique in HREM

The core structure of a dislocation complex in SiGe/Si system composed of a perfect 60degrees dislocation and an extended 60 dislocation has been revealed at atomic level. This is attained by applying the image deconvolution technique in combination with dynamical diffraction effect correction to an image taken with a 200 kV field-emission high-resolution electron microscope. The possible configuration of the dislocation complex is analyzed and their Burgers vectors are determined. (C) 2003 Elsevier B.V. All rights reserved.

Stochastically forced dislocation density distribution in plastic deformation

The dynamical evolution of dislocations in plastically deformed metals is controlled by both deterministic factors arising out of applied loads and stochastic effects appearing due to fluctuations of internal stress. Such type of stochastic dislocation processes and the associated spatially inhomogeneous modes lead to randomness in the observed deformation structure. Previous studies have analyzed the role of randomness in such textural evolution but none of these models have considered the impact of a finite decay time (all previous models assumed instantaneous relaxation which is "unphysical") of the stochastic perturbations in the overall dynamics of the system. The present article bridges this knowledge gap by introducing a colored noise in the form of an Ornstein-Uhlenbeck noise in the analysis of a class of linear and nonlinear Wiener and Ornstein-Uhlenbeck processes that these structural dislocation dynamics could be mapped on to. Based on an analysis of the relevant Fokker-Planck model, our results show that linear Wiener processes remain unaffected by the second time scale in the problem but all nonlinear processes, both Wiener type and Ornstein-Uhlenbeck type, scale as a function of the noise decay time τ. The results are expected to ramify existing experimental observations and inspire new numerical and laboratory tests to gain further insight into the competition between deterministic and random effects in modeling plastically deformed samples.

Sedimentology, structure and age estimate of five continental slope submarine landslides, eastern Australia

Sedimentological and accelerator mass spectrometry (AMS) 14C data provide estimates of the structure and age of five submarine landslides (∼0.4–3 km3) present on eastern Australia's continental slope between Noosa Heads and Yamba. Dating of the post-slide conformably deposited sediment indicates sediment accumulation rates between 0.017 m ka–1 and 0.2 m ka–1, which is consistent with previous estimates reported for this area. Boundary surfaces were identified in five continental slope cores at depths of 0.8 to 2.2 m below the present-day seafloor. Boundary surfaces present as a sharp colour-change across the surface, discernible but small increases in sediment stiffness, a slight increase in sediment bulk density of 0.1 g cm–3, and distinct gaps in AMS 14C ages of at least 25 ka. Boundary surfaces are interpreted to represent a slide plane detachment surface but are not necessarily the only ones or even the major ones. Sub-bottom profiler records indicate that: (1) the youngest identifiable sediment reflectors upslope from three submarine landslides terminate on and are truncated by slide rupture surfaces; (2) there is no obvious evidence for a post-slide sediment layer draped over, or burying, slide ruptures or exposed slide detachment surfaces; and (3) the boundary surfaces identified within the cores are unlikely to be near-surface slide surfaces within an overall larger en masse dislocation. These findings suggest that these submarine landslides are geologically recent (<25 ka), and that the boundary surfaces are either: (a) an erosional features that developed after the landslide, in which case the boundary surface age provides a minimum age for the landslide; or (b) detachment surfaces from which slabs of near-surface sediment were removed during landsliding, in which case the age of the sediment above the boundary surface indicates the approximate age of landsliding. While an earthquake-triggering mechanism is favoured for the initiation of submarine landslides on the eastern Australian margin, further evidence is required to confirm this interpretation.

New dimeric supramolecular structure of mixed (phthalocyaninato)(porphyrinato)-europium(III) sandwiches : preparation and spectroscopic characteristics

The mixed double-decker Eu\[Pc(15C5)4](TPP) (1) was obtained by base-catalysed tetramerisation of 4,5-dicyanobenzo-15-crown-5 using the half-sandwich complex Eu(TPP)(acac) (acac = acetylacetonate), generated in situ, as the template. For comparative studies, the mixed triple-decker complexes Eu2\[Pc(15C5)4](TPP)2 (2) and Eu2\[Pc(15C5)4]2(TPP) (3) were also synthesised by the raise-by-one-story method. These mixed ring sandwich complexes were characterised by various spectroscopic methods. Up to four one-electron oxidations and two one-electron reductions were revealed by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). As shown by electronic absorption and infrared spectroscopy, supramolecular dimers (SM1 and SM3) were formed from the corresponding double-decker 1 and triple-decker 3 in the presence of potassium ions in MeOH/CHCl3.