Fine scale characterization of surface/subsurface and nanosized debris particles on worn Cu-10 % Pb nanocomposites

The identification of the damage mechanisms involved in the wear process demands the finer scale characterization of the surface, as well as the subsurface region of the wear scar region, and to this end, this article discusses the results obtained with Cu-10 wt% Pb-based metallic nanocomposites using a host of characterization techniques, including transmission electron microscopy and ion milling microscopy. Apart from finer scale characterization to understand deformation and cracking during the wear process, X-ray photoelectron spectroscopy analysis of wear debris confirms the occurrence of oxidation of Pb phase to Pb3O4. In order to understand the role of oxides on friction and wear, sliding wear tests in argon were also carried out and such tests did not result in the formation of any tribo-oxides, as confirmed using electron probe microanalysis. Conclusively, oxidative wear is attributed as the dominant wear mechanism in ambient conditions for Cu-10 wt% Pb composite.

A comparative study of failure features in aerospace grade unidirectional and bidirectional woven CFRP composite laminates under four-point bend fatigue loads

Damage mechanisms in unidirectional (UD) and bi-directional (BD) woven carbon fiber reinforced polymer (CFRP) laminates subjected to four point flexure, both in static and fatigue loadings, were studied. The damage progression in composites was monitored by observing the slopes of the load vs. deflection data that represent the stiffness of the given specimen geometry over a number of cycles. It was observed that the unidirectional composites exhibit gradual loss in stiffness whereas the bidirectional woven composites show a relatively quicker loss during stage II of fatigue damage progression. Both, the static and the fatigue failures in unidirectional carbon fiber reinforced polymer composites originates due to generation of cracks on compression face while in bidirectional woven composites the damage ensues from both the compression and the tensile faces. These observations are supported by a detailed fractographic analysis.

Ultrafast electronic excitation in CaF2 crystals

A new pump and probe experimental system was developed, the pump pulse duration of which is stretched and is much longer than that of the probe pulse. Using this system, time-resolved electronic excitation processes and damage mechanisms in CaF2 crystals were studied. The measured reflectivity of the probe pulse begins to increase at the peak of the pump pulse and increases rapidly in the latter half of the pump pulse, when the pump pulse duration is stretched to 580fs. Our experimental results indicate that both multiphoton ionization and impact ionization play important roles in the generation of conduction band electrons, at least they do so when the pump pulse durations are equal to or longer than 580fs.

飞秒激光作用下全向高反膜破坏的激发过程

设计和制备了全向高反膜SiO2／TiO2，研究了它在不同脉冲宽度、不同脉冲能量的飞秒激光作用下的破坏阈值和烧蚀深度．利用发展的抽运．探针方法，研究了抽运脉冲作用下材料中导带电子的超快激发和能量沉积过程，建立并求解了飞秒激光激发材料和材料的激发对抽运光自身反作用的耦合动力学模型．模型较好地揭示了材料破坏的激发过程．

Optical breakdown of 6H SiC induced by wavelength-tunable femtosecond laser pulses

The damage mechanisms and micromachining of 6H SiC are studied by using femtosecond laser pulses at wavelengths between near infrared (NIR) and near ultraviolet (NUV) delivered from an optical parametric amplifier (OPA). Our experimental results indicate that high quality microstructures can be fabricated in SiC crystals. On the basis of the dependence of the ablated area and the laser pulse energy, the threshold fluence of SiC is found to increase with the incident laser wavelength in the visible region, while it remains almost constant for the NIR laser. For the NIR laser pulses, both photoionization and impact ionization play important roles in electronic excitation, while for visible lasers, photoionization plays a more important role.

吸收杂质热辐射诱导光学薄膜破坏的热力机制

光学元件的破坏是限制高功率激光系统发展的主要问题,理解光学元件的破坏机制对于高功率激光系统的设计、运行参量选择以及器件技术发展有重要影响。以热辐射模型为基础研究了杂质吸收诱导光学薄膜破坏的热力过程。研究发现薄膜发生初始破坏所需时间很短,脉冲的大部分时间是引起薄膜发生更大的破坏。在考虑吸收杂质发生相变的情况下,计算了吸收杂质汽化对薄膜产生的蒸汽压力,论证了薄膜发生宏观破坏的可能性。此模型能很好地解释光学薄膜的平底坑破坏形貌。

Biomonitoring of polycyclic aromatic hydrocarbons (PAH) and heavy metals Ni, V in sediments and anodonts of the Anzali Lagoon and applicability of netural red retention assay (NRR) as biomarkers of these pollutants

Biochemical ecotoxicology and biomarkers using are a new sciences that are used for biomonitoring in aquatic environment. Biomonitoring plays a vital role in strategies to identify, assess, and control contaminants. On the other hands in recent year's attention to polycyclic Aromatic Hydrocarbons (PAHs) and heavy metals increased in aquatic environments because of their carcinogenic and mutagenic properties combined with their nearly ubiquitous distribution in depositional environments by oil pollution or industrial waste waters. The present research aimed to assess PAHs and Ni, V levels in surface sediments and bivalves (Anodonta cygnea)and the effects of PAHs and heavy metals (Ni,V) on the hemocyte of the Anodonta cygnea were investigated in 2 stations (Mahrozeh, Selke in Anzali Lagoon, North of Iran). Samples were collected during at 2 different periods of the year, Dry and rain seasons, (June & September) and to confirm our first observations, Cage station is added. The bivalves hemocytes were monitored for membrane injury by NRR methods (neutral red retention assay). Heavy metal (Ni, V) concentrations were determined by Atomic Absorption in Anodonta cygnea and the sediments in Anzali Lagoon. The vanadium concentration in bivalves and sediments was ND(not detect )-0.4231 μg/g and 1.4381-306.9603 μg/g dry weight respectively. Nickel concentration in bivalves and sediments was 0.0231-1.3351, 0.4024-19.3561 μg/g dry weight respectively. PAHs concentrations were determined by GC-Mass in Anodonta cygnea and the sediments. Average concentration of PAHs is 115-373.788 ng/g dry weight in bivalves and average concentration of PAHs is 34.85-1339.839 ng/g dry weight in sediments. Bioaccumulation sediments factor(BASF) is high about PAHs (>1) and BASF is low for Ni, V (<1) . Internal Damage mechanisms of bivalves hemocytes (cell mortality, dye leakage, decreased membrane stability, are observed (Lowe Methods). Statistical analysis was used to explore the relationship between altered cellular and above contaminants. There are power and negative correlations between PAHs and NRR method for hemocytes in Anodonta cygnea (P<0.0005), but good correlation is not observed between Ni, V and NRR method for hemocytes in every time. This research indicates that the NRR assay is a useful screening technique able to discriminate polluted sites and at first we announce that Anodonta cygnea hemocytes are efficient biomarker for PAHs pollutants in fresh water.

An efficient approach of modelling the flexural cracking behaviour of un-notched plain concrete prisms subject to monotonic and cyclic loading

In the field of vibration-based damage detection of concrete structures efficient damage models are needed to better understand changes in the vibration properties of cracked structures. These models should quantitatively replicate the damage mechanisms in concrete and easily be used as damage detection tools. In this paper, the flexural cracking behaviour of plain concrete prisms subject to monotonic and cyclic loading regimes under displacement control is tested experimentally and modelled numerically. Four-point bending tests on simply supported un-notched prisms are conducted, where the cracking process is monitored using a digital image correlation system. A numerical model, with a single crack at midspan, is presented where the cracked zone is modelled using the fictitious crack approach and parts outside that zone are treated in a linear-elastic manner. The model considers crack initiation, growth and closure by adopting cyclic constitutive laws. A multi-variate Newton-Raphson iterative solver is used to solve the non-linear equations to ensure equilibrium and compatibility at the interface of the cracked zone. The numerical results agree well with the experiments for both loading scenarios. The model shows good predictions of the degradation of stiffness with increasing load. It also approximates the crack-mouth-opening-displacement when compared with the experimental data of the digital image correlation system. The model is found to be computationally efficient as it runs full analysis for cyclic loading in less than 2. min, and it can therefore be used within the damage detection process. © 2013 Elsevier Ltd.

Acoustic emission testing of paper

Using Acoustic Emission Testing (AET) to determine the onset of paper damage will be demonstrated on tensile coupons made from mechanical pulp. This technique is part of an EU funded project named the Fifth Frame Program. Its aim is to develop methods for determining specific damage mechanisms through AET. Various such techniques of damage detection will be demonstrated in the coming work.

Review of methods to predict solder joint reliability under thermo-mechanical cycling

Solder joints are often the cause of failure in electronic devices, failing due to cyclic creep induced ductile fatigue. This paper will review the modelling methods available to predict the lifetime of SnPb and SnAgCu solder joints under thermo-mechanical cycling conditions such as power cycling, accelerated thermal cycling and isothermal testing, the methods do not apply to other damage mechanisms such as vibration or drop-testing. Analytical methods such as recommended by the IPC are covered, which are simple to use but limited in capability. Finite element modelling methods are reviewed, along with the necessary constitutive laws and fatigue laws for solder, these offer the most accurate predictions at the current time. Research on state-of-the-art damage mechanics methods is also presented, although these have not undergone enough experimental validation to be recommended at present

Understanding the Interaction between Low-Energy Electrons and DNA Nucleotides in Aqueous Solution

Reactions that can damage DNA have been simulated using a combination of molecular dynamics and density functional theory. In particular, the damage caused by the attachment of a low energy electron to the nucleobase. Simulations of anionic single nucleotides of DNA in an aqueous environment that was modeled explicitly have been performed. This has allowed us to examine the role played by the water molecules that surround the DNA in radiation damage mechanisms. Our simulations show that hydrogen bonding and protonation of the nucleotide by the water can have a significant effect on the barriers to strand breaking reactions. Furthermore, these effects are not the same for all four of the bases.

Genotoxic risk of herbicides to Anguilla anguilla L.

No contexto dos contaminantes aquáticos, os herbicidas são considerados como um dos grupos mais perigosos. Uma vez aplicados, estes são facilmente transportados para cursos de água, quer devido a uma pulverização pouco cuidada ou devido a fenómenos de escorrência superficial e/ou subterrânea. A presença destes agroquímicos no ambiente tem vindo a ser associada a efeitos nefastos em organismos não-alvo, como é o caso dos peixes. Contudo, existe ainda uma grande lacuna no que diz respeito à informação científica relacionada com o seu impacto genotóxico. Deste modo, a presente tese foi delineada com o intuito de avaliar o risco genotóxico em peixes de duas formulações de herbicidas: o Roundup®, que tem como princípio activo o glifosato, e o Garlon®, que apresenta o triclopir na base da sua constituição, produtos estes largamente utilizados na limpeza de campos agrícolas, assim como em florestas. Foi ainda planeado desenvolver uma base de conhecimento no que diz respeito aos mecanismos de dano do ADN. Como último objectivo, pretendeu-se contribuir para a mitigação dos efeitos dos agroquímicos no biota aquático, nomeadamente em peixes, fornecendo dados científicos no sentido de melhorar as práticas agrícolas e florestais. Este estudo foi realizado adoptando a enguia europeia (Anguilla anguilla L.) como organismo-teste, e submetendo-a a exposições de curta duração (1 e 3 dias) dos produtos comerciais mencionados, em concentrações consideradas ambientalmente realistas. Para a avaliação da genotoxicidade foram aplicadas duas metodologias: o ensaio do cometa e o teste das anomalias nucleares eritrocíticas (ANE). Enquanto o ensaio do cometa detecta quebras na cadeia do ADN, um dano passível de ser reparado, o aparecimento das ANE revela lesões cromossomais, sinalizando um tipo de dano de difícil reparação. O ensaio do cometa foi ainda melhorado com uma nova etapa que incluiu a incubação com enzimas de reparação (FPG e EndoIII), permitindo perceber a ocorrência de dano oxidativo no ADN. No que diz respeito ao Roundup®, o envolvimento do sistema antioxidante como indicador de um estado próoxidante foi também alvo de estudo. Uma vez que as referidas formulações se apresentam sob a forma de misturas, o potencial genotóxico dos seus princípios activos foi também avaliado individualmente. No caso particular do Roundup®, também foram estudados o seu surfactante (amina polietoxilada; POEA) e o principal metabolito ambiental (ácido aminometilfosfórico; AMPA). Os resultados obtidos mostraram a capacidade do Roundup® em induzir tanto dano no ADN (em células de sangue, guelras e fígado) como dano cromossómico (em células de sangue). A investigação sobre o possível envolvimento do stresse oxidativo demonstrou que o tipo de dano no ADN varia com as concentrações testadas e com a duração da exposição. Deste modo, com o aumento do tempo de exposição, os processos relacionados com o envolvimento de espécies reactivas de oxigénio (ERO) ganharam preponderância como mecanismo de dano no ADN, facto que é corroborado pela activação do sistema antioxidante observado nas guelras, assim como pelo aumento dos sítios sensíveis a FPG em hepatócitos. O glifosato e o POEA foram também considerados genotóxicos. O POEA mostrou induzir uma maior extensão de dano no ADN, tanto comparado com o glifosato como com a mistura comercial. Apesar de ambos os componentes contribuirem para a genotoxicidade da formulação, a soma dos seus efeitos individuais nunca foi observada, apontando para um antagonismo entre eles e indicando que o POEA não aumenta o risco associado ao princípio activo. Deste modo, realça-se a necessidade de regulamentar limiares de segurança para todos os componentes da formulação, recomendando, em particular, a revisão da classificação do risco do POEA (actualmente classificado com “inerte”). Uma vez confirmada a capacidade do principal metabolito do glifosato – AMPA – em exercer dano no ADN assim como dano cromossómico, os produtos da degradação ambiental dos princípios activos assumem-se como um problema silencioso, realçando assim a importância de incluir o AMPA na avaliação do risco relacionado com herbicidas com base no glifosato. A formulação Garlon® e o seu princípio activo triclopir mostraram um claro potencial genotóxico. Adicionalmente, o Garlon® mostrou possuir um potencial genotóxico mais elevado do que o seu princípio activo. No entanto, a capacidade de infligir dano oxidativo no ADN não foi demonstrada para nenhum dos agentes. No que concerne à avaliação da progressão do dano após a remoção da fonte de contaminação, nem os peixes expostos a Roundup® nem os expostos a Garlon® conseguiram restaurar completamente a integridade do seu ADN ao fim de 14 dias. No que concerne ao Roundup®, o uso de enzimas de reparação de lesões específicas do ADN associado ao teste do cometa permitiu detectar um aparecimento tardio de dano oxidativo, indicando deste modo um decaimento progressivo da protecção antioxidante e ainda uma incapacidade de reparar este tipo de dano. O período de pós-exposição correspondente ao Garlon® revelou uma tendência de diminuição dos níveis de dano, apesar de nunca se observar uma completa recuperação. Ainda assim, foi evidente uma intervenção eficiente das enzimas de reparação do ADN, mais concretamente as direccionadas às purinas oxidadas. A avaliação das metodologias adoptadas tornou evidente que o procedimento base do ensaio do cometa, que detecta apenas o dano nãoespecífico no ADN, possui algumas limitações quando comparado com a metodologia que incluiu a incubação com as enzimas de reparação, uma vez que a última mostrou reduzir a possibilidade de ocorrência de resultados falsos negativos. Os dois parâmetros adoptados (ensaio do cometa e teste das ANE) demonstraram possuir aptidões complementares, sendo assim recomendado a sua utilização conjunta com vista a efectuar uma avaliação mais adequada do risco genotóxico. Globalmente, os resultados obtidos forneceram indicações de grande utilidade para as entidades reguladoras, contribuindo ainda para a (re)formulação de medidas de conservação do ambiente aquático. Neste sentido, os dados obtidos apontam para a importância da avaliação de risco dos herbicidas incluir testes de genotoxicidade. A magnitude de risco detectada para ambas as formulações adverte para a necessidade de adopção de medidas restritivas em relação à sua aplicação na proximidade de cursos de água. Como medidas mitigadoras de impactos ambientais, aponta-se o desenvolvimento de formulações que incorporem adjuvantes selecionados com base na sua baixa toxicidade.

Variable mixed-mode delamination in composite laminates under fatigue conditions: testing & analysis

La majoria de les fallades en elements estructurals són degudes a càrrega per fatiga. En conseqüència, la fatiga mecànica és un factor clau per al disseny d'elements mecànics. En el cas de materials compòsits laminats, el procés de fallada per fatiga inclou diferents mecanismes de dany que resulten en la degradació del material. Un dels mecanismes de dany més importants és la delaminació entre capes del laminat. En el cas de components aeronàutics, les plaques de composit estan exposades a impactes i les delaminacions apareixen facilment en un laminat després d'un impacte. Molts components fets de compòsit tenen formes corbes, superposició de capes i capes amb diferents orientacions que fan que la delaminació es propagui en un mode mixt que depen de la grandària de la delaminació. És a dir, les delaminacions generalment es propaguen en mode mixt variable. És per això que és important desenvolupar nous mètodes per caracteritzar el creixement subcrític en mode mixt per fatiga de les delaminacions. El principal objectiu d'aquest treball és la caracterització del creixement en mode mixt variable de les delaminacions en compòsits laminats per efecte de càrregues a fatiga. Amb aquest fi, es proposa un nou model per al creixement per fatiga de la delaminació en mode mixt. Contràriament als models ja existents, el model que es proposa es formula d'acord a la variació no-monotònica dels paràmetres de propagació amb el mode mixt observada en diferents resultats experimentals. A més, es du a terme un anàlisi de l'assaig mixed-mode end load split (MMELS), la característica més important del qual és la variació del mode mixt a mesura que la delaminació creix. Per a aquest anàlisi, es tenen em compte dos mètodes teòrics presents en la literatura. No obstant, les expressions resultants per l'assaig MMELS no són equivalents i les diferències entre els dos mètodes poden ser importants, fins a 50 vegades. Per aquest motiu, en aquest treball es porta a terme un anàlisi alternatiu més acurat del MMELS per tal d'establir una comparació. Aquest anàlisi alternatiu es basa en el mètode dels elements finits i virtual crack closure technique (VCCT). D'aquest anàlisi en resulten importants aspectes a considerar per a la bona caracterització de materials utilitzant l'assaig MMELS. Durant l'estudi s'ha dissenyat i construït un utillatge per l'assaig MMELS. Per a la caracterització experimental de la propagació per fatiga de delaminacions en mode mixt variable s'utilitzen diferents provetes de laminats carboni/epoxy essencialment unidireccionals. També es du a terme un anàlisi fractogràfic d'algunes de les superfícies de fractura per delaminació. Els resultats experimentals són comparats amb les prediccions del model proposat per la propagació per fatiga d'esquerdes interlaminars.

Mechanical and tribological properties of PVD-coated cemented carbide as evaluated by a new multi-pass scratch testing method

A new test method based on multipass scratch testing has been developed for evaluating the mechanical and tribological properties of thin, hard coatings. The proposed test method uses a pin-on-disc tribometer and during testing a Rockwell C diamond stylus is used as the “pin” and loaded against the rotating coated sample. The influence of normal load on the number of cycles to coating damage is investigated and the resulting coating damage mechanisms are evaluated by posttest scanning electron microscopy. The present study presents the test method by evaluating the performance of Ti0.86Si0.14N, Ti0.34Al0.66N, and (Al0.7Cr0.3)2O3 coatings deposited by cathodic arc evaporation on cemented carbide inserts. The results show that the test method is quick, simple, and reproducible and can preferably be used to obtain relevant data concerning the fatigue, wear, chipping, and spalling characteristics of different coating-substrate composites. The test method can be used as a virtually nondestructive test and, for example, be used to evaluate the fatigue and wear resistance as well as the cohesive and adhesive interfacial strength of coated cemented carbide inserts prior to cutting tests.

Resposta térmica de um compósito PEEK+PTFE+Fibra de carbono+grafite

Composites based on PEEK + PTFE + CARBON FIBER + Graphite (G_CFRP) has increased application in the top industries, as Aerospace, Aeronautical, Petroleum, Biomedical, Mechanical and Electronics Engineering challenges. A commercially available G_CFRP was warmed up to three different levels of thermal energy to identify the main damage mechanisms and some evidences for their intrinsic transitions. An experimental test rig for systematize a heat flux was developed in this dissertation, based on the Joule Effect. It was built using an isothermal container, an internal heat source and a real-time measurement system for test a sample by time. A standard conical-cylindrical tip was inserted into a soldering iron, commercially available and identified by three different levels of nominal electrical power, 40W (manufacturer A), 40W (manufacturer B), 100W and 150W, selected after screening tests: these power levels for the heat source, after one hour of heating and one hour of cooling in situ, carried out three different zones of degradation in the composite surface. The bench was instrumented with twelve thermocouples, a wattmeter and a video camera. The twelve specimens tested suffered different degradation mechanisms, analyzed by DSC (Differential Scanning Calorimetry) and TG (Thermogravimetry) techniques, Scanning Electron Microscopy (SEM) and Energy-Dispersive X-Rays (EDX) Analysis. Before and after each testing, it was measured the hardness of the sample by HRM (Hardness Rockwell M). Excellent correlations (R2=1) were obtained in the plots of the evaporated area after one hour of heating and one hour of cooling in situ versus (1) the respective power of heat source and (2) the central temperature of the sample. However, as resulting of the differential degradation of G_CFRP and their anisotropy, confirmed by their variable thermal properties, viscoelastic and plastic properties, there were both linear and non-linear behaviour between the temperature field and Rockwell M hardness measured in the radial and circumferential directions of the samples. Some morphological features of the damaged zones are presented and discussed, as, for example, the crazing and skeletonization mechanism of G_CFRP