Love and leadership: constructing follower narrative identities of charismatic leadership

Most extant research on charismatic leadership has an essentialist orientation that characterises it as leader behaviour, leader communication or follower dependency. Our approach is more discursively oriented. To research charismatic leadership, we used aesthetic narrative positivism, which undertook utilitarian as well as critical method. We examined followers' implicit narratives of their lived experiences of charismatic leadership in organisational settings. We examined metaphors for this experience. Most respondents identified with positive affect, a form of love story; a minority experienced negative affect, especially anger; and some experienced both positive and negative emotions. We posit that if one adopts a certain identity within the context of a dramatic narrative, one might be attributed with charismatic qualities by followers. In this way, we suggest that charismatic leadership might be less a gift from God and more a 'gift from followers'. © The Author(s) 2013.

Análise clínica comparativa das condições do periodonto em resposta a procedimentos restauradores com invasão do espaço biologico

O presente ensaio clínico comparou clinicamente, a resposta periodontal em humanos a procedimentos restauradores com invasão do espaço biológico do periodonto, restaurados transcirurgicamente ou após aumento de coroa clínica em 10 pacientes com idade entre 19 e 35 anos. Os exames inicial, 45, 90 e 180 dias, foram realizados por um examinador calibrado, que avaliou Índice de Placa Visível (IPV) e de Sangramento Gengival (ISG), Profundidade de Sondagem (PS), Perda de Inserção Clínica (PIC). Também foi registrada, a medida da distância da parede cervical da restauração até a crista óssea; após a conclusão das restaurações e ao final de 6 meses. Foram utilizadas resinas compostas tipo Filtek Flow ® (3M-ESPE) e Charisma ® (Hareuas-Kulser). Generalized Estimating Equations, Teste de Wald e Teste t foram utilizados para análise estatística (p ≤ 0,05). IPV e ISG mantiveram-se abaixo dos 10% ao final do estudo. Aos 180 dias a PS retornou a valores semelhantes do nível inicial para ambos os grupos, de 2,5 mm para 2,4 mm nos sítios tratados. Os sítios tratados com restauração transcirúrgica, a perda de inserção clínica manteve-se estável ao longo do estudo, de 0,8 mm no ínicio para 0,6 mm ao final; Enquanto que nos locais onde foi realizado aumento de coroa clínica a perda de inserção clínica foi significativa, de 0,6 mm para 2,2 mm nos sítios tratados, de 0,5 mm para 1,7 mm nos sítios contíguos e de 0,7 mm para 1,1 mm nos sítios opostos. Com relação à margem gengival, a posição da parede cervical da restauração após 180 dias, ficou mais freqüentemente localizada subgengivalmente para os locais onde foram realizadas restaurações transcirúrgicas. A distância da parede cervical da restauração à crista óssea se manteve inalteralda nos locais onde foram realizadas restaurações transcirúrgicas, enquanto que nos locais onde foram feitos aumentos de coroa clínica, a distância diminuiu de 3,0 mm para 2,2 mm, sendo esta diferença significativa. A resposta periodontal associada a restaurações adesivas realizadas transcirurgicamente com invasão do espaço biológico do periodonto foi semelhante aquela observada em locais onde as restaurações foram realizadas após procedimentos de aumento de coroa clínica e respeitando o espaço biológico do periodonto.

Avaliação da transmitância direta de resinas compostas por meio de espectrofotometria de UV-visível

Este estudo avaliou as porcentagens de Transmitância direta (Td) das resinas compostas microhíbridas Charisma F, Solitaire II (Heraeus Kulzer ), Intens e Tetric Ceram (Ivoclar Vivadent) e nanoparticuladas Esthet-X (Dentsply De trey) e Filtek Supreme (3M Espe) nas cores Vita A3 (Dentina) e translúcido (Esmalte), ou seus correspondentes. Foram confeccionados três corpos-de-prova para cada material e cor, de formato quadrangular com 12x12 mm de lado e espessura de 1 mm. Após fotoativação, foram realizadas três leituras por corpo-de-prova em espectrofotômetro de UV-visível HP 8453 (Hewlett-Packard), com temperatura e umidade controladas (22±2°C/50±5%). Os ângulos de incidência e leitura em 0° / 0° foram utilizados para os comprimentos de onda de 400 a 700 nm. Os espectros obtidos foram analisados quanto ao percentual médio de Td para todo o espectro, em intervalos de 20 nm, e nos comprimentos de onda de 400, 560 e 700 nm. Através de ANOVA e teste de Tukey (p=0,01) encontrou-se que a resina composta Charisma obteve as maiores porcentagens de Td em todos os espectros, exceto para a cor Esmalte em 700 nm, que ficou abaixo da resina composta Esthet-X cor Esmalte. O teste t-Student demonstrou serem significativamente maiores os percentuais de Td para os espectros das cores Translúcido, exceto para as resinas compostas Supreme, em que não diferiram, e Charisma, com porcentagens de Td significativamente maiores para a cor Dentina. Por meio de teste não paramétrico de Friedman verificou-se que todas as resinas compostas estudadas demonstraram aumento significativo de Td com o aumento do comprimento de onda, com exceção da resina composta Solitaire, cores Dentina e Esmalte, que não demonstrou diferenças significativas nos comprimentos de onda de 560 e 700 nm.

Religião e cultura local: estudo de dois grupos espíritas potiguares

The subject of this research is the spiritual religious field, connected with the local cultural perspectives. Its basis is the analysis of two spiritual groups settled in Natal/RN: The Spiritual Group Evangelho no Lar and the Spiritual Center Garimpeiros da Luz . These two groups represent a point of convergence of several sectors of this religion, either through its insertion in the local sphere or in contact to nationally influent leaders, like the mediums Francisco Cândido Xavier and Divaldo Pereira Franco. Then, it aims to reach the potiguar singularities in their spiritualism approaches, looking for an analyses to possible connections between local values and themes from the spiritualism largely developed in Brazil. So, its objective is to act in the scope of influence, references, representations and adaptive practices in a local context, and they signalize special practices . The approaches until now developed refer only to the living of a Brazilian spiritualism, perfectly developed in contact with the catholic substrate, but there s still a gap about the local observation, with its peculiarities, which its research aims to disclosure. The option for a qualitative approach, in perfect relationship with the nature of the questions which were made was considered as an appropriate way to guide the study. To reach this, it will be made an ethnography of the studied groups, not only in the use of open interviews with its members but also in the contact and observation of its religious behavior, for example: meeting for studies of the doctrine, mediunic meetings, public lectures, helping the public in general. As results of this research we can point to the delimitation of local cultural references, which are undeniable, in relation to the identification of RN personalities who are considered coordinators or active spirits in the work performed by the groups. Thus, Auta de Souza, poetess and woman of great religiosity, Augusto Severo de Albuquerque Maranhão, martyr of the aeronautics, Father João Maria, object of popular devotion and Abdias Antônio de Oliveira, ex president of the Spiritual Federation of RN, present themselves as spiritual beings who lead the adaptability to the local context. In such a context, we have to point out the work of mediums, who, having a specific charisma, interacted with the groups in the establishment of these cultural bridges already made in their own contexts (national level), through the work equally possible to be locally reproduced. This and other facts, point out to perspectives of cultural circularity , including referring to a greater linking to sub layers in a true zone that converges and has circulation between an erudite spiritualism with another one, turned to the incorporation of local and popular elements

Avaliação do desgaste abrasivo causado pelas cerâmicas Duceram e Vita em resinas compostas pelo método do disco retificado

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparação da influência entre tempos de polimerização em resinas compostas polimerizadas com LED e Luz Incandescente

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of surface sealant on the translucency of composite resin: effect of immersion time and immersion media

This study evaluated the effect of surface sealant on the translucency of composite resin immersed in different solutions. The study involved the following materials: Charisma, Fortify and coffee, Coca-Cola®, tea and artificial saliva as solutions. Sixty-four specimens (n = 8) were manufactured and immersed in artificial saliva at 37 ± 1 °C. Samples were immersed in the solutions for three times a day and re-immersed in artificial saliva until the translucency readings. The measurements were carried out at nine times: T1 - 24 hours after specimen preparation, T2 - 24 hours after immersion in the solutions, T3 - 48 hours and T4 to T9 - 7, 14, 21, 30, 60 and 90 days, respectively, after immersion. The translucency values were measured using a JOUAN device. The results were subjected to ANOVA and Tukey's test at 5%. The surface sealant was not able to protect the composite resin against staining, the coffee showed the strongest staining action, followed by tea and regarding immersion time, a significant alteration was noted in the translucency of composite resin after 21 days.

Development of new standard procedures for the evaluation of dental composite abrasive wear

This article discusses the development of a test bench and a methodology for the study of composite resin abrasive wear. To evaluate the operation of the test bench and to compare the proposed methodology with other existing ones, a study was made of the five composites most commonly used by dentists.The one-way ANOVA method and the Tukey test were used to statistically analyze the results by multiple comparisons of the groups of resins tested. Using the proposed methodology, these resins were classified in an increasing order of abrasive wear strength, as follows: Charisma (the lowest abrasive wear strength), Tetric, TPH, Herculite and Z-100 (the highest abrasive wear strength) (P < 0.05). In comparison to other methodologies, the results of the proposed methodology presented the lowest coefficient of variation. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Comparative in vitro study of the shear bond strength of brackets bonded with restorative and orthodontic resins

The aim of this study was to evaluate the shear bond strength of brackets bonded with different restorative systems and compare it with that afforded by an established orthodontic bonding system. Seventy human bicuspids were used, divided into five different groups with 14 teeth each. Whereas a specific orthodontic bonding resin (Transbond (TM) XT) was used in the control group, the restorative systems Charisma, Tetric Ceram, TPH Spectrum and Z100 were used in the other four groups. Seven days after bonding the brackets to the samples, shear forces were applied under pressure in a universal testing machine. The data collected was evaluated using the ANOVA test and, when a difference was identified, the Tukey test was applied. A 5% level of significance was adopted. The mean results of the shear bond strength tests were as follows: Group 1 (Charisma), 14.98 MPa; Group 2 (Tetric Ceram), 15.16 MPa; Group 3 (TPH), 17.70 MPa; Group 4 (Z100), 13.91 MPa; and Group 5 or control group (Transbond (TM) XT), 17.15 MPa. No statistically significant difference was found among the groups. It was concluded that all tested resins have sufficient bond strength to be recommended for bonding orthodontic brackets.

Shear strength evaluation of composite-composite resin associations

Objective: The aim of this study was to investigate the shear strength between distinct associations of different commercial composite resins and their fracture modes.Methods: Nine composite-composite associations (n = 90) were prepared for shear strength evaluation and separated into the following groups: Z/Z (Filtek Z250 UD + Filtek Z250 A2); Z/ D (Filtek Z250 UD + Durafill VS A2); Z/S (Filtek Z250 UD + Filtek Supreme YT); C/C (Charisma OA2 + Charisma A2); C/D (Charisma OA2 + Durafill VS A2); C/S (Charisma OA2 + Filtek Supreme YT); H/H (Herculite XRV B2D + Herculite XRV B2E); H/D (Herculite XRV B2D + Durafill VS A2); H/S (Herculite XRV B2D + Filtek Supreme YT). Shear tests were carried out using universal mechanical test equipment with a load of 200 kgf and speed of 0.5 mm/min. Ultimate shear strength data (MPa) from all tested groups were submitted to analysis of variance (one-way ANOVA) and the Tukey test. The fractured surfaces of the test samples were visually evaluated by binocular stereomicroscope at 20 times magnification. Fractures were classified as either adhesive or cohesive or mixed.Results: The highest ultimate shear strength observed for composite-composite associations was found for the groups: Z/Z, C/S, H/H, H/S, Z/S and C/C. Those associations containing the Durafill resin were weaker than the others.Conclusion: Microparticle RBC associations presented lower shear strength than hybrid and/or nanoparticle RBC associations, once the only significant difference was found when the Durafill resin was involved. (c) 2008 Elsevier Ltd. All rights reserved.

Effects of bleaching with carbamide peroxide gels on microhardness of restoration materials

The objective of this in vitro study was to quantitatively assess the effects of bleaching with 10 and 15% carbamide peroxide (CP) on restoration materials by performing superficial microhardness analysis. Acrylic cylindrical containers (4 x 2 mm) were filled with the following restoration products: Charisma (Heraues Kulzer, Vila Santa Catarina, São Paulo, Brazil), Durafill VS (Heraeus Kulzer), Vitremer (3M, Sumaré, São Paulo, Brazil), Dyract (Dentsply, Petrópolis, Rio de Janeiro, Brazil), and Permite C (SDI, São Pauio, São Paulo, Brazil). Sixty samples were prepared of each restoration material. Twenty samples received bleaching treatment with 10% CP, 20 samples received bleaching treatment with 15% CP, and 20 samples were kept submerged in artificial saliva, which was replaced daily. The treatment consisted of immersion of the specimens in 1 cm3 of CP at 10 and 15% for 6 hours per day during 3 weeks, whereupon the test specimens were washed, dried, and kept immersed in artificial saliva for 18 hours. Then the test and control specimens were analyzed using a microhardness gauge. The Knoop Hardness Number (KHN) was taken for each test and control specimen at five different locations by applying a 25 g force for 20 seconds. The values obtained were transformed into KHNs and the mean was calculated. The data were submitted to statistical analysis by analysis of variance and Tukey test, p < .05. The means/standard deviations were as follows: Charisma: CP 10% 38.52/4.08, CP 15% 34.31/6.13, saliva 37.36/4.48; Durafill VS: CP 10% 18.65/1.65, CP 15% 19.38/2.23, saliva 18.27/1.43; Dyract AP: CP 10% 30.26/2.81, CP 15% 28.64/5.44, saliva 33.88/3.46; Vitremer: CP 10% 28.15/3.04, CP 15% 17.40/3.11, saliva 40.93/4.18; and Permite C: CP 10% 183.50/27.09, CP 15% 159.45/5.78, saliva 215.80/26.15. A decrease in microhardness was observed for the materials Dyract AP, Vitremer, and Permite C after treatment with CP at 10 and 15%, whereas no effect on either of the two composites (Charisma and Durafill) was verified. CLINICAL SIGNIFICANCE: The application of the carbamide peroxide gels at 10 and 15% did not alter the microhardness of the composite resins Charisma and Durafill. In situ and clinical studies are necessary to enable one to conclude that the reduction in microhardness of the materials effectively results in clinical harm to the restorations.

Microhardness assessment of different commercial brands of resin composites with different degrees of translucence

Owing to improvements in its mechanical properties and to the availability of shade and translucence resources, resin composite has become one of the most widely used restorative materials in present day Dentistry. The aim of this study was to assess the relation between the surface hardness of seven different commercial brands of resin composites (Charisma, Fill Magic, Master Fill, Natural Look, Opallis, Tetric Ceram, and Z250) and the different degrees of translucence (translucid, enamel and dentin). Vickers microhardness testing revealed significant differences among the groups. Z250 was the commercial brand that showed the best performance in the hardness test. When comparing the three groups assessed within the same brand, only Master Fill and Fill Magic presented statistically significant differences among all of the different translucencies. Natural Look was the only one that showed no significant difference among any of the three groups. Charisma, Opallis, Tetric Ceram and Z250 showed significant differences among some of the tested groups. Based on the results found in this study, it was not possible to establish a relation between translucence and the microhardness of the resin composites assessed. Depending on the material assessed, however, translucence variation did affect the microhardness values of the resin composites.

Changes on transmittance mode of different composite resins

The purpose of this study was to evaluate the transmittance of seven different composite resins. Ten specimens were prepared (10 mm diameter, 2 mm thickness) for each experimental group, as follows: G1- Charisma® A 2 (Heraeus-Kulzer); G2- Filtek™ Supreme A 2E (3M/ESPE); G3- Filtek™ Supreme A2B (3M/ESPE); G4-Filtek™ Supreme YT (3M/ESPE); G5- Esthet-X® A2 (Dentsply); G6- Esthet-X® YE (Dentsply); G7- Durafill® A 2 (Heraeus-Kulzer) and G8- Filtek™ Z-100 A2 (3M/ESPE). The transmittance mode was measured using a UV-visible spectrophotometer (Cary Instruments) at 400-760 nm. The specimens were evaluated at three different times: zero hour (initial), 24 hours and 10 days after immersion in artificial saliva. The differences in transmittance were determined by two-way analysis of variance (ANOVA) and Tukey's test. The various composite resins showed significant differences in the wavelength dependence of transmittance. The mean values of transmittance increased significantly, with wavelengths increasing from 400 to 760 nm. The performance of the experimental groups was similar in terms of immersion time, considering that at time zero and after 10 days, all the groups showed similar results, which were statistically higher than the values obtained after 24 hours of immersion. The Filtek™ Supreme YT composite resin presented the highest mean transmittance values along the wavelengths at the three measured times. Esthet-X® YE and Durafill® yielded similar mean transmittance values, which were higher than those of the other groups. This study shows that the transmittance values of composite resins are directly related with the type, size and amount of inorganic filler particles.

Análise comparativa da transmitância de diferentes tipos de resina composta pelo método de espectrofotometria de luz visível

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da influência do selante de superfície sobre a translucidez de resina composta. Efeito de tempos e soluções

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)