Passive solar options for reducing heating demand and maintain indoor climate in a multifamily house in Sweden

This research was carried out by studying possible renovation of a two-storey detached multifamily building by using passive solar design options in a cold climate in Borlänge, Sweden where the heating Degree Days are 4451 (base 20°C). Borlänge`s housing company, Tunabyggen, plans to renovate the project house located inthe multicultural district, Jakobsgårdarna. The goal of the thesis was to suggest a redesign of the current building, decrease the heating energy use, by applying passive solar design and control strategies, in a most reasonable way. In addition ensure a better thermal comfort for the tenants in the dwellings. Literatures have been studied, from which can be inferred that passive design should be abasic design consideration for all housing constructions, because it has advantages to ensure thermal comfort, and reduce the energy use. In addition further savings can be achieved applying different types of control strategies, from which the house will be more personalized, and better adapted to the user’s needs.The proposed method is based on simulations by using TRNSYS software. First a proper building model was set up, which represents the current state of the project building. Then the thermal insulation and the windows were upgraded, based on today's building regulations. The developments of the passive solar options were accomplished in two steps. First of all the relevant basic passive design elements were considered, then those advantages were compared to the advantages of applying new conventional thermostat, and shading control strategies.The results show that there is significant potential with the different types of passive solar design; their usage depends primarily on the location of the site as well as the orientation of the project building. Applying the control strategies, such as thermostat, and shading control, along the thermal insulation upgrade, may lead to significant energy savings (around 40 %), by comparison to the reference building without any upgrade.

Regulating Green Buildings

Green buildings are becoming the new fixation for the building industry because of the impact they have on the carbon footprint and the cost savings they offer for utility costs. Governments have begun to produce policies and regulations that implement and mandate green buildings due to these successes. However, the policies are having troubles increasing the popularity and quantities of green buildings. There is a need for a way to produce better policies and regulations that will increase both the amount of green buildings their popularity. A decision-making tool, such as a decision tree, should be created to help policymakers who do not have the backgrounds to produce well thought out regulations. By researching the green building industry and its current status, key points can be graphed out in a decision tool that will provide the needed education for policy makers to produce better green building regulations.

Metodología y criterios para evaluar la influencia de la domótica y su preinstalación en los edificios en función de los condicionantes constructivos y de la envolvente interior

La introducción de la automatización de servicios en los edificios de vivienda comenzó a implementarse a finales del siglo XX. Desde entonces, los edificios que incluyen instalaciones completas de automatización suelen conocerse como edificios domotizados o edificios inteligentes e implican la introducción en la arquitectura de tecnologías que hasta la fecha eran ajenas a ésta. El diseño de estos nuevos edificios de viviendas implica cada vez más el trabajo de equipos multidisciplinares y exige por parte del arquitecto la adquisición de nuevos conocimientos y herramientas proyectuales que aseguren la viabilidad constructiva de dichos servicios de automatización doméstica. La presente tesis tiene como objetivo determinar la influencia de la automatización de servicios domésticos en la fase de proyecto constructivo de los edificios para finalmente ofrecer al arquitecto herramientas, criterios y una metodología que le ayude a proyectar estos edificios satisfactoriamente. Esta influencia se evalúa y determina en función de los condicionantes constructivos, que se definen como aquellas consideraciones que el proyectista puede tener en cuenta en la fase de diseño o de concepción de un edificio. La metodología utilizada en esta investigación incluye el análisis conceptual y de contenidos de documentos normativos, técnicos, y de investigación así como un estudio de mercado de las aplicaciones más habituales en domótica. Finalmente la investigación se centra en la envolvente interior del edificio para determinar la influencia de los servicios de domotización no convencionales en el proyecto arquitectónico. Al margen de las aportaciones teóricas de esta investigación, las cuales se han propuesto para afianzar el marco teórico de la disciplina, los resultados obtenidos constatan que dicha influencia en la fase de proyecto existe y que es posible detectar qué condicionantes constructivos se derivan de la normativa de aplicación en este tipo de proyectos, de las nuevas tecnologías implicadas en las instalaciones de automatización y de los esfuerzos de estandarización de las asociaciones de empresas en el campo de la domótica. ABSTRACT The automation of services in residential buildings (also called home automation) began to be implemented in the late twentieth century. Since then, those buildings with full automation services are often known as intelligent buildings or smart buildings, and they imply the introduction into the architecture of technologies that where foreign to the field until then. The design of these new residential buildings increasingly involves the need of multidisciplinary teams and requires the architect to acquire new knowledge and project tools in order to ensure the constructability of such home automation services. This thesis pretends to determine the impact and influence of the introduction of home automation services in the design stage of residential buildings in order to, finally, provide the architect with the tools, criteria and methodology to help him design such projects successfully. This impact is evaluated and determined by the constructive constraints or factors implied, which are defined as those considerations that the designer may take into account in the conception and design stage of the project. The methodology used in this research includes conceptual and content analysis applied to normative and technical documents, regulatory standards and research papers, as well as a market survey of the most common applications and services in home automation. Finally, the investigation focuses on the inner partitions of the building to determine the influence of unconventional domotics services in the architectural design. Besides the theoretical contributions of this research, which have been proposed to strengthen the theoretical framework of the discipline, the achieved results find that such influence in the design stage exists and that it is possible to detect which constructive constraints are derived from the application of building regulations, from the new technologies involved in home automation facilities or from the standardization efforts of the joint ventures in the field of home automation.

Values of the deformation modulus of soil at different ways of determining this amount

In accordance with Russian, Kazakh and European building regulations, the deformation modulus of soil should be determined in the laboratory and also apply in situ soil tests on the stages of engineering geology prospecting. In this paper we present data on the determination and adjustment of the deformation characteristics at different stages of construction

A Review of the Environmental and Health Effects of Termiticides under Australian Conditions

There exists a major cost issue as regards termite damage to wooden structures. A factor in this cost has been the increasing trend towards slab-on-ground construction. Current literature has been reviewed in relation to concerns about the possible public/environmental health consequences of the repeated use of termiticides in large quantities. The previous, current and projected future use patterns of termiticides are reviewed in the context of techniques appropriate for termite control and treatment priorities. The phasing out of organochlorine termiticides in Australia was undertaken to minimise impact of these substances on the environment and to a lesser extent on public health. These persistent chemicals were replaced by substances with high activity but relatively low persistence in the soil. There has also been an increase in the use of alternative methods (e.g. physical barriers) for the control of termites. The transition away from organochlorine termiticides has led to a realisation that significant information gaps exist with regard to replacement chemicals and other technologies. Although relatively persistent, the organochlorine chemicals have a limited lifespan in soils. Their concentrations are gradually attenuated by processes such as transport away from the point of application and biodegradation. Wooden structures originally treated with these substances will, with the passing of time, be at risk of termite infestation. The only available option is re-treatment with chemicals currently registered for termite control. Thus, there are likely to be substantial future increases associated with the cost of re-treatment and repairs of older slab-on-ground dwellings. More information is required on Australian termite biology, taxonomy and ecology. The risks of termite infestation need to be evaluated, both locally and nationally so that susceptible or high risk areas, structures and building types can be identified and preventive measures taken in terms of design and construction. Building regulations and designs need to be able to reduce or eliminate high-risk housing; and eliminate or reduce conditions that are attractive to termites and/or facilitate termite infestation.

Evaluation of passive ventilation provision in domestic housing retrofit

Increasing energy efficiency in the residential sector, while maintaining adequate home ventilation for health and well-being, is proving to be a challenge. This study assesses the efficacy of passive ventilation strategies designed to comply with building regulations and imposed after housing energy-efficiency retrofits. In particular, it focuses on the provision of ventilation using background through-wall vents, which remains a common strategy in a number of European countries including Ireland and the UK, where vent sizes, related to floor area, are stipulated in building regulations. A collective of social housing, with background through-wall vents installed post thermal retrofit, is taken as a case study. These homes are modelled to interrogate the impact of the passive ventilation strategy on house air exchange rate and thermal heating energy loads. The reaction of occupants to through-wall vent installation is decidedly negative and many block vents to limit thermal discomfort and heat loss. Simulation studies show significant external air ingress through vents. A wide range of effective air change rates are observed when vents are sized without reference to building airtightness, and significant energy penalties result for the leakier homes. This study evaluates the provision of passive through-wall ventilation as part of a retrofit programme and shows it to have a number of drawbacks that may impact on the health of the building and its occupants and ultimately be at odds with the aims of achieving energy efficiency in the residential sector.

The role of the Saudi government and the Saudi building code in implementing sustainable housing construction in Saudi Arabia

The housing construction industry in Saudi Arabia has been booming rapidly in the past two decades. This boom has faced multiple downfalls in relation to government regulations and building codes, one of which is the application of sustainable methods to the housing construction. This paper sheds some light on the current role of the Saudi government and the role of the Saudi Building Code (SBC) in the housing construction industry. The methodology utilised in this paper was a Delphi survey that was distributed to twenty-five key stakeholders in the housing construction industry in Saudi Arabia. The results indicate that there is a lack of integration between the Saudi Building Code and the current construction methods used in the current construction industry. Some factors and elements are recommended to be incorporated into the Saudi Building Code and to be adopted as regulations in the Saudi housing construction industry.

Building the safety case for UAS operations in support of natural disaster response

A framework supporting the systematic development of safety cases for Unmanned Aircraft System (UAS) operations in a broad range of civil and commercial applications is presented. The case study application is the use of UAS for disaster response. In those States where regulations do not preclude UAS operations altogether, approvals for UAS operations can be granted on a case-by-case basis contingent on the provision of a safety case acceptable to the relevant National Airworthiness Authority (NAA). A safety case for UAS operations must show how the risks associated with the hazards have been managed to an acceptable level. The foundational components necessary for structuring and assessing these safety cases have not yet been proposed. Barrier-bow-tie models are used in this paper to structure the safety case for the two primary hazards of 1) a ground impact, and 2) a Mid-Air Collision (MAC). The models establish the set of Risk Control Variables (RCVs) available to reduce the risk. For the ground-impact risk model, seven RCVs are identified which in combination govern the probability of an accident. Similarly, ten RCVs are identified within the MAC model. The effectiveness of the RCVs and how they can implemented in terms of processes, policies, devices, practices, or other actions for each of the case-study applications are discussed. The framework presented can provide for the more systematic and consistent regulation of UAS through a "safety target" approach.

Formal theory building for the avalanche game: explaining counter-intuitive behaviour of a complex system using geometrical and human behavioural/physiological effects

In 'Avalanche', an object is lowered, players staying in contact throughout. Normally the task is easily accomplished. However, with larger groups counter-intuitive behaviours appear. The paper proposes a formal theory for the underlying causal mechanisms. The aim is to not only provide an explicit, testable hypothesis for the source of the observed modes of behaviour-but also to exemplify the contribution that formal theory building can make to understanding complex social phenomena. Mapping reveals the importance of geometry to the Avalanche game; each player has a pair of balancing loops, one involved in lowering the object, the other ensuring contact. For more players, sets of balancing loops interact and these can allow dominance by reinforcing loops, causing the system to chase upwards towards an ever-increasing goal. However, a series of other effects concerning human physiology and behaviour (HPB) is posited as playing a role. The hypothesis is therefore rigorously tested using simulation. For simplicity a 'One Degree of Freedom' case is examined, allowing all of the effects to be included whilst rendering the analysis more transparent. Formulation and experimentation with the model gives insight into the behaviours. Multi-dimensional rate/level analysis indicates that there is only a narrow region in which the system is able to move downwards. Model runs reproduce the single 'desired' mode of behaviour and all three of the observed 'problematic' ones. Sensitivity analysis gives further insight into the system's modes and their causes. Behaviour is seen to arise only when the geometric effects apply (number of players greater than degrees of freedom of object) in combination with a range of HPB effects. An analogy exists between the co-operative behaviour required here and various examples: conflicting strategic objectives in organizations; Prisoners' Dilemma and integrated bargaining situations. Additionally, the game may be relatable in more direct algebraic terms to situations involving companies in which the resulting behaviours are mediated by market regulations. Finally, comment is offered on the inadequacy of some forms of theory building and the case is made for formal theory building involving the use of models, analysis and plausible explanations to create deep understanding of social phenomena.

Building post crisis watchtowers: investment management Systems and new institutional logics for regulatory compliance

The financial crisis of 2007-2009 has precipitated large scale regulatory change. Tight deadlines for implementation require organizations to start working on remediation projects before final drafts of regulations are crystalized. Firms are faced with engaging in complex and costly change management programs at a time when profits are diminished. As a consequence of these factors, pre-crisis logics for organizing compliance practices are being questioned and new approaches introduced. Our study explores the use of Investment Management Systems (IMS) in facilitating compliance arrangements. Our motivation is to understand the new logics and the part played by IMS in supporting these approaches. The study adopts an institutional logics perspective to explore the use of such systems at eight financial organizations. The study found new logics for organizing compliance include consolidation, centralization, harmonization and consistency and that the IMS plays an important role in supporting and enabling related activities.

Decentralization in Nation State Building of Indonesia

Introduction：Today, many countries, regardless of developed or developing, are trying to promote decentralization. According to Manor, as his quoting of Nickson’s argument, decentralization stems from the necessity to strengthen local governments as proxy of civil society to fill the yawning gap between the state and civil society (Manor [1999]: 30). With the end to the Cold War following the collapse of the Soviet Union rendering the cause of the “leadership of the central government to counter communism” meaningless, Manor points out, it has become increasingly difficult to respond flexibly to changes in society under the centralized system. Then, what benefits can be expected from the effectuation of decentralization? Litvack-Ahmad-Bird cited the four points: attainment of allocative efficiency in the face of different local preferences for local public goods; improvement to government competitiveness; realization of good governance; and enhancement of the legitimacy and sustainability of heterogeneous national states (Litvack, Ahmad & Bird [1998]: 5). They all contribute to reducing the economic and social costs of a central government unable to respond to changes in society and enhancing the efficiency of state administration through the delegation of authority to local governments. Why did Indonesia have a go at decentralization? As Maryanov recognizes, reasons for the implementation of decentralization in Indonesia have never been explicitly presented (Maryanov [1958]: 17). But there was strong momentum toward building a democratic state in Indonesia at the time of independence, and as indicated by provisions of Article 18 of the 1945 Constitution, there was the tendency in Indonesia from the beginning to debate decentralization in association with democratization. That said debate about democratization was fairly abstract and the main points are to ease the tensions, quiet the complaints, satisfy the political forces and thus stabilize the process of government (Maryanov [1958]: 26-27). 　　　What triggered decentralization in Indonesia in earnest, of course, was the collapse of the Soeharto regime in May 1998. The Soeharto regime, regarded as the epitome of the centralization of power, became incapable of effectively dealing with problems in administration of the state and development administration. Besides, the post-Soeharto era of “reform (reformasi)” demanded the complete wipeout of the Soeharto image. In contraposition to the centralization of power was decentralization. The Soeharto regime that ruled Indonesia for 32 years was established in 1966 under the banner of “anti-communism.” The end of the Cold War structure in the late 1980s undermined the legitimate reason the centralization of power to counter communism claimed by the Soeharto regime. The factor for decentralization cited by Manor is applicable here. 　　　Decentralization can be interpreted to mean not only the reversal of the centralized system of government due to its inability to respond to changes in society, as Manor points out, but also the participation of local governments in the process of the nation state building through the more positive transfer of power (democratic decentralization) and in the coordinated pursuit with the central government for a new shape of the state. However, it is also true that a variety of problems are gushing out in the process of implementing decentralization in Indonesia. 　　　This paper discusses the relationship between decentralization and the formation of the nation state with the awareness of the problems and issues described above. Section 1 retraces the history of decentralization by examining laws and regulations for local administration and how they were actually implemented or not. Section 2 focuses on the relationships among the central government, local governments, foreign companies and other actors in the play over the distribution of profits from exploitation of natural resources, and examines the process of the ulterior motives of these actors and the amplification of mistrust spawning intense conflicts that, in extreme cases, grew into separation and independence movements. Section 3 considers the merits and demerits at this stage of decentralization implemented since 2001 and shed light on the significance of decentralization in terms of the nation state building. Finally, Section 4 attempts to review decentralization as the “opportunity to learn by doing” for the central and local governments in the process of the nation state building. 　　　In the context of decentralization in Indonesia, deconcentration (dekonsentrasi), decentralization (desentralisasi) and support assignments (tugas pembantuan; medebewind, a Dutch word, was used previously) are defined as follows. Dekonsentrasi means that when the central government puts a local office of its own, or an outpost agency, in charge of implementing its service without delegating the administrative authority over this particular service. The outpost agency carries out the services as instructed by the central government. A head of a local government, when acting for the central government, gets involved in the process of dekonsentrasi. Desentralisasi, meanwhile, occurs when the central government cedes the administrative authority over a particular service to local governments. Under desentralisasi, local governments can undertake the particular service at their own discretion, and the central government, after the delegation of authority, cannot interfere with how local governments handle that service. Tugas pembantuan occur when the central government makes local governments or villages, or local governments make villages, undertake a particular service. In this case, the central government, or local governments, provides funding, equipment and materials necessary, and officials of local governments and villages undertake the service under the supervision and guidance of the central or local governments. Tugas pembantuan are maintained until local governments and villages become capable of undertaking that particular service on their own.

Las normativas de construcción con tierra en el mundo/The earth building normative documents in the world

La tierra ha sido utilizada como material de construcción desde hace siglos. No obstante, la normativa al respecto está muy dispersa, y en la mayoría de países desarrollados surgen numerosos problemas técnicos y legales para llevar a cabo una construcción con este material. Este artículo estudia el panorama normativo para las construcciones con tierra cruda a nivel internacional, analizando cincuenta y cinco normas y reglamentos de países repartidos por los cinco continentes, que representan el estado del arte de la normalización de la tierra cruda como material de construcción. Es un estudio referenciado sobre las normas y reglamentos vigentes desarrollados por los organismos nacionales de normalización o autoridades correspondientes. Se presentan las normativas y los organismos que las emiten, analizando la estructura y contenido de cada una. Se estudian y analizan los aspectos más relevantes, como la estabilización, selección de los suelos, requisitos de los productos y ensayos existentes, comparando las diferentes normativas. Este trabajo puede ser de gran utilidad para el desarrollo de futuras normas y como referencia para arquitectos e ingenieros que trabajen con tierra. For centuries, earth has been used as a construction material. Nevertheless, the normative in this matter is very scattered, and in the most developed countries, carrying out a construction with this material implies a variety of technical and legal problems. This article analyzes, in an international level, the normative panorama about constructions with earth, analyzing fifty five standards and regulations of countries all around the five continents; these represent the state of art that normalizes the earth as a construction material. It is a study indexed on the actual procedures and regulations developed by the national organisms of normalization or correspondent authorities. The standards and the organisms that produce them appear, analyzing the structure and the content of each one. We have studied and analyzed the most relevant aspects, such as stabilization, soil selections, the requisites of the products and the existent test, comparing the diverse normative. The knowledge from this study could be very useful for the development of future standards and as a reference for architects and engineers that work with earth.

Facade typologies as a tool for selecting refurbishment measures for the Spanish residential building stock

Today, the building sector alone accounts for 40% of the total energy consumption in the European Union (EU). In most EU member states, about 70–90% of the buildings were constructed at least 20 years ago. Due to this, these buildings have a worse energy efficiency behavior than the new ones that comply with current regulations. As a consequence, acting on the existing building stock is needed, developing special methods on assessment and advice in order to reduce the total energy consumption. This article addresses a procedure allowing the classification and characterization of existing buildings facades. It can help researchers to achieve in-depth knowledge of the facades construction and therefore knowing their thermal behavior. Once knowing that, the most appropriate upgrading strategies can be established with the purpose of reducing the energy demand. Furthermore, the classified facade typologies have been verified, complying with current and future Spanish regulations and according to the results obtained, a series of upgrading strategies based on the opaque part and those in the translucent part, have been proposed. As a conclusion, this procedure helps us to select the most appropriate improvement measures for each type of facade in order to comply with current and future Spanish regulations. This proposed method has been tested in a specific neighborhood of Madrid, in a selected period of time, between 1950 and 1980, but it could be applicable to any other city.

Systematic Process for Building a Fault Diagnoser Based on Petri Nets Applied to a Helicopter

This work presents a systematic process for building a Fault Diagnoser (FD), based on Petri Nets (PNs) which has been applied to a small helicopter. This novel tool is able to detect both intermittent and permanent faults. The work carried out is discussed from theoretical and practical point of view. The procedure begins with a division of the whole system into subsystems, which are the devices that have to be modeled by using PN, considering both the normal and fault operations. Subsequently, the models are integrated into a global Petri Net diagnoser (PND) that is able to monitor a whole helicopter and show critical variables to the operator in order to determine the UAV health, preventing accidents in this manner. A Data Acquisition System (DAQ) has been designed for collecting data during the flights and feeding PN diagnoser with them. Several real flights (nominal or under failure) have been carried out to perform the diagnoser setup and verify its performance. A summary of the validation results obtained during real flight tests is also included. An extensive use of this tool will improve preventive maintenance protocols for UAVs (especially helicopters) and allow establishing recommendations in regulations

Social Citizenship and Institution Building: EU-Enlargement and the Restructuring of Welfare States in East Central Europe. CES Germany & Europe Working Paper, No. 01.2, April 2001

With the EU-enlargement process well underway, this paper focuses on social citizenship as a conceptual frame for analyzing the restructuring of social institutions in applicant countries in East Central Europe. So far, comparative welfare state analysis has concentrated mainly on the developed economies of the OECD-countries; there is little systematic analytical work on the transitions in post-communist Europe. Theoretically, this paper builds on comparative welfare state analysis as well as on new institutionalism. The initial hypothesis is built on the assumption that emerging patterns of social support and social security diverge from the typology described in the comparative welfare state literature inasmuch as the transformation of postcommunist societies is distinctly different from the building of welfare states in Europe. The paper argues that institutionbuilding is shaped by and embedded in the process of European integration and part of governance in the EU. Anticipating full membership in the European Union, the applicant countries have to adapt to the rules and regulations of the EU, including the "social acquis." Therefore, framing becomes an important feature of institutional changes. The paper seeks to identify distinct patterns and problems of the institutionalization of social citizenship.