On the relation between ownership structure and capital structure

The agency relationship between managers and shareholders has the potential to influence decision-making in the firm which in turn potentially impacts on firm characteristics such as value and leverage. Prior evidence has demonstrated an association between ownership structure and firm value. This paper extends the literature by examining a further link between ownership structure and capital structure. Using an agency framework, it is argued that the distribution of equity ownership among corporate managers and external blockholders may have a significant relation with leverage. The empirical results provide support for a positive relation between external blockholders and leverage, and non-linear relation between the level of managerial share ownership and leverage. The results also suggest that the relation between external block ownership and leverage varies across the level of managerial share ownership. These results are consistent with active monitoring by blockholders, and the effects of convergence-of-interests and management entrenchment.

Genetic structure of a population of Ganoderma boninense on oil palm

Ganoderma boninense (the causal agent of basal stem rot of oil palm in Papua New Guinea) has a tetrapolar mating system with multiple alleles. Investigations into the population structure of G. boninense, using interfertility between isolates as a marker, revealed that the population on oil palm was comprised predominantly of genetically distinct individuals, although a number of isolates were found to share single mating alleles. No direct hereditary relationship was found between isolates on neighbouring or spatially separated diseased palms, indicating that outcrossing had probably occurred over several generations in the founder population prior to colonization of oil palm. In this study, a total of 81 A and 83 B mating type alleles (factors) were detected with 18 allelic repeats at the A locus and 17 at the B locus. Alleles appeared to be randomly dispersed throughout the population in each study block, although there was a significantly (P

Masonry macro-block analysis

The structural analysis involves the definition of the model and selection of the analysis type. The model should represent the stiffness, the mass and the loads of the structure. The structures can be represented using simplified models, such as the lumped mass models, and advanced models resorting the Finite Element Method (FEM) and Discrete Element Method (DEM). Depending on the characteristics of the structure, different types of analysis can be used such as limit analysis, linear and non-linear static analysis and linear and non-linear dynamic analysis. Unreinforced masonry structures present low tensile strength and the linear analyses seem to not be adequate for assessing their structural behaviour. On the other hand, the static and dynamic non-linear analyses are complex, since they involve large time computational requirements and advanced knowledge of the practitioner. The non-linear analysis requires advanced knowledge on the material properties, analysis tools and interpretation of results. The limit analysis with macro-blocks can be assumed as a more practical method in the estimation of maximum load capacity of structure. Furthermore, the limit analysis require a reduced number of parameters, which is an advantage for the assessment of ancient and historical masonry structures, due to the difficult in obtaining reliable data.

GLUT2 surface expression and intracellular transport via the constitutive pathway in pancreatic beta cells and insulinoma: evidence for a block in trans-Golgi network exit by brefeldin A.

The biosynthesis, intracellular transport, and surface expression of the beta cell glucose transporter GLUT2 was investigated in isolated islets and insulinoma cells. Using a trypsin sensitivity assay to measure cell surface expression, we determined that: (a) greater than 95% of GLUT2 was expressed on the plasma membrane; (b) GLUT2 did not recycle in intracellular vesicles; and (c) after trypsin treatment, reexpression of the intact transporter occurred with a t1/2 of approximately 7 h. Kinetics of intracellular transport of GLUT2 was investigated in pulse-labeling experiments combined with glycosidase treatment and the trypsin sensitivity assay. We determined that transport from the endoplasmic reticulum to the trans-Golgi network (TGN) occurred with a t1/2 of 15 min and that transport from the TGN to the plasma membrane required a similar half-time. When added at the start of a pulse-labeling experiment, brefeldin A prevented exit of GLUT2 from the endoplasmic reticulum. When the transporter was first accumulated in the TGN during a 15-min period of chase, but not following a low temperature (22 degrees C) incubation, addition of brefeldin A (BFA) prevented subsequent surface expression of the transporter. This indicated that brefeldin A prevented GLUT2 exit from the TGN by acting at a site proximal to the 22 degrees C block. Together, these data demonstrate that GLUT2 surface expression in beta cells is via the constitutive pathway, that transport can be blocked by BFA at two distinct steps and that once on the surface, GLUT2 does not recycle in intracellular vesicles.

Structure-function analyses point to a polynucleotide-accommodating groove essential for APOBEC3A restriction activities.

Members of the human APOBEC3 family of editing enzymes can inhibit various mobile genetic elements. APOBEC3A (A3A) can block the retrotransposon LINE-1 and the parvovirus adeno-associated virus type 2 (AAV-2) but does not inhibit retroviruses. In contrast, APOBEC3G (A3G) can block retroviruses but has only limited effects on AAV-2 or LINE-1. What dictates this differential target specificity remains largely undefined. Here, we modeled the structure of A3A based on its homology with the C-terminal domain of A3G and further compared the sequence of human A3A to those of 11 nonhuman primate orthologues. We then used these data to perform a mutational analysis of A3A, examining its ability to restrict LINE-1, AAV-2, and foreign plasmid DNA and to edit a single-stranded DNA substrate. The results revealed an essential functional role for the predicted single-stranded DNA-docking groove located around the A3A catalytic site. Within this region, amino acid differences between A3A and A3G are predicted to affect the shape of the polynucleotide-binding groove. Correspondingly, transferring some of these A3A residues to A3G endows the latter protein with the ability to block LINE-1 and AAV-2. These results suggest that the target specificity of APOBEC3 family members is partly defined by structural features influencing their interaction with polynucleotide substrates.

Structure et évolution thermique de la croûte supérieure des chaînes de subduction : approches thermologique et modélisation numérique, dans les North Cascades (U.S.A) et de la zone de faille Motagua (Guatemala)

Cette thèse cible l'étude de la structure thermique de la croûte supérieure (<10km) dans les arcs magmatiques continentaux, et son influence sur l'enregistrement thermochronologique de leur exhumation et de leur évolution topographique. Nous portons notre regard sur deux chaînes de montagne appartenant aux Cordillères Américaines : Les Cascades Nord (USA) et la zone de faille Motagua (Guatemala). L'approche utilisée est axée sur la thermochronologie (U-Th-Sm)/He sur apatite et zircon, couplée avec la modélisation numérique de la structure thermique de la croûte. Nous mettons en évidence la variabilité à la fois spatiale et temporelle du gradient géothermique, et attirons l'attention du lecteur sur l'importance de prendre en compte la multitude des processus géologiques perturbant la structure thermique dans les chaînes de type cordillère, c'est à dire formées lors de la subduction océanique sous un continent.Une nouvelle approche est ainsi développée pour étudier et contraindre la perturbation thermique autour des chambres magmatiques. Deux profiles âge-elevation (U-Th-Sm)/He sur apatite et zircon, ont été collectées 7 km au sud du batholithe de Chilliwack, Cascades Nord. Les résultats montrent une variabilité spatiale et temporelle du gradient géothermique lors de l'emplacement magmatique qui peut être contrainte et séparé de l'exhumation. Durant l'emplacement de l'intrusion, la perturbation thermique y atteint un état d'équilibre (-80-100 °C/km) qui est fonction du flux de magma et de ia distance à la source du magma, puis rejoint 40 °C/km à la fin du processus d'emplacement magmatique.Quelques nouvelles données (U-Th)/He, replacées dans une compilation des données existantes dans les Cascades Nord, indiquent une vitesse d'exhumation constante (-100 m/Ma) dans le temps et l'espace entre 35 Ma et 2 Ma, associée à un soulèvement uniforme de la chaîne contrôlé par l'emplacement de magma dans la croûte durant toute l'activité de l'arc. Par contre, après ~2 Ma, le versant humide de la chaîne est affecté par une accélération des taux d'exhumation, jusqu'à 3 km de croûte y sont érodés. Les glaciations ont un triple effet sur l'érosion de cette chaîne: (1) augmentation des vitesses d'érosion, d'exhumation et de soulèvement la où les précipitations sont suffisantes, (2) limitation de l'altitude contrôlé par la position de Γ Ε LA, (3) élargissement du versant humide et contraction du versant aride de la chaîne.Les modifications des réseaux de drainage sont des processus de surface souvent sous-estimés au profil d'événements climatiques ou tectoniques. Nous proposons une nouvelle approche couplant une analyse géomorphologique, des données thermochronologiques de basse température ((U-Th-Sm)/He sur apatite et zircon), et l'utilisation de modélisation numérique thermo-cinématique pour les mettre en évidence et les dater; nous testons cette approche sur la gorge de la Skagit river dans les North Cascades.De nouvelles données (U-Th)/He sur zircons, complétant les données existantes, montrent que le déplacement horizontal le long de la faille transformante continentale Motagua, la limite des plaques Caraïbe/Amérique du Nord, a juxtaposé un bloc froid, le bloc Maya (s.s.), contre un bloque chaud, le bloc Chortis (s.s.) originellement en position d'arc. En plus de donner des gammes d'âges thermochronologiques très différents des deux côtés de la faille, le déplacement horizontal rapide (~2 cm/a) a produit un fort échange thermique latéral, résultant en un réchauffement du côté froid et un refroidissement du côté chaud de la zone de faille de Motagua.Enfin des données (U-Th-Sm)/He sur apatite témoignent d'un refroidissement Oligocène enregistré uniquement dans la croûte supérieure de la bordure nord de la zone de faille Motagua. Nous tenterons ultérieurement de reproduire ce découplage vertical de la structure thermique par la modélisation de la formation d'un bassin transtensif et de circulation de fluides le long de la faille de Motagua. - This thesis focuses on the influence of the dynamic thermal structure of the upper crust (<10km) on the thermochronologic record of the exhumational and topographic history of magmatic continental arcs. Two mountain belts from the American Cordillera are studied: the North Cascades (USA) and the Motagua fault zone (Guatemala). I use a combined approach coupling apatite and zircon (U-Th-Sm}/He thermochronology and thermo- kinematic numerical modelling. This study highlights the temporal and spatial variability of the geothermal gradient and the importance to take into account the different geological processes that perturb the thermal structure of Cordilleran-type mountain belts (i.e. mountain belts related to oceanic subduction underneath a continent}.We integrate apatite and zircon (U-Th)/He data with numerical thermo-kinematic models to study the relative effects of magmatic and surface processes on the thermal evolution of the crust and cooling patterns in the Cenozoic North Cascades arc (Washington State, USA). Two age-elevation profiles that are located 7 km south of the well-studied Chiliiwack intrusions shows that spatial and temporal variability in geothermal gradients linked to magma emplacement can be contrained and separated from exhumation processes. During Chiliiwack batholith emplacement at -35-20 Ma, the geothermal gradient of the country rocks increased to a very high steady-state value (80-100°C/km), which is likely a function of magma flux and the distance from the magma source area. Including temporally varying geothermal gradients in the analysis allows quantifying the thermal perturbation around magmatic intrusions and retrieving a relatively simple denudation history from the data.The synthesis of new and previously published (U-Th)/He data reveals that denudation of the Northern Cascades is spatially and temporally constant at -100 m/Ma between ~32 and ~2 Ma, which likely reflects uplift due to magmatic crustal thickening since the initiation of the Cenozoic stage of the continental magmatic arc. In contrast, the humid flank of the North Cascades is affected by a ten-fold acceleration in exhumation rate at ~2 Ma, which we interpret as forced by the initiation of glaciations; around 3 km of crust have been eroded since that time. Glaciations have three distinct effects on the dynamics of this mountain range: (1) they increase erosion, exhumation and uplift rates where precipitation rates are sufficient to drive efficient glacial erosion; (2) they efficiently limit the elevation of the range; (3) they lead to widening of the humid flank and contraction of the arid flank of the belt.Drainage reorganizations constitute an important agent of landscape evolution that is often underestimated to the benefit of tectonic or climatic events. We propose a new method that integrates geomorphology, low-temperature thermochronometry (apatite and zircon {U-Th-Sm)/He), and 3D numerical thermal-kinematic modelling to detect and date drainage instability producing recent gorge incision, and apply this approach to the Skagit River Gorge, North Cascades.Two zircon (U-Th)/He age-elevation profiles sampled on both sides of the Motagua Fault Zone (MFZ), the boundary between the North American and the Caribbean plates, combined with published thermochronological data show that strike-slip displacement has juxtaposed the cold Maya block (s.s.) against the hot, arc derived, Chortis block (s.s ), producing different age patterns on both sides of the fault and short-wavelength lateral thermal exchange, resulting in recent heating of the cool side and cooling of the hot side of the MFZ.Finally, an apatite (U-Th-Sm)/He age-elevation profile records rapid cooling at -35 Ma localized only in the upper crust along the northern side of the Motagua fault zone. We will try to reproduce these data by modeling the thermal perturbation resulting from the formation of a transtensional basin and of fluid flow activity along a crustal- scale strike-slip fault.

Identification of amino acid residues in the alpha, beta, and gamma subunits of the epithelial sodium channel (ENaC) involved in amiloride block and ion permeation.

The amiloride-sensitive epithelial Na channel (ENaC) is a heteromultimeric channel made of three alpha beta gamma subunits. The structures involved in the ion permeation pathway have only been partially identified, and the respective contributions of each subunit in the formation of the conduction pore has not yet been established. Using a site-directed mutagenesis approach, we have identified in a short segment preceding the second membrane-spanning domain (the pre-M2 segment) amino acid residues involved in ion permeation and critical for channel block by amiloride. Cys substitutions of Gly residues in beta and gamma subunits at position beta G525 and gamma G537 increased the apparent inhibitory constant (Ki) for amiloride by > 1,000-fold and decreased channel unitary current without affecting ion selectivity. The corresponding mutation S583 to C in the alpha subunit increased amiloride Ki by 20-fold, without changing channel conducting properties. Coexpression of these mutated alpha beta gamma subunits resulted in a non-conducting channel expressed at the cell surface. Finally, these Cys substitutions increased channel affinity for block by external Zn2+ ions, in particular the alpha S583C mutant showing a Ki for Zn2+ of 29 microM. Mutations of residues alpha W582L, or beta G522D also increased amiloride Ki, the later mutation generating a Ca2+ blocking site located 15% within the membrane electric field. These experiments provide strong evidence that alpha beta gamma ENaCs are pore-forming subunits involved in ion permeation through the channel. The pre-M2 segment of alpha beta gamma subunits may form a pore loop structure at the extracellular face of the channel, where amiloride binds within the channel lumen. We propose that amiloride interacts with Na+ ions at an external Na+ binding site preventing ion permeation through the channel pore.

MORPHOLOGICAL AND MICROMORPHOLOGICAL CHANGES IN THE STRUCTURE OF A RHODIC HAPLUDOX AS A RESULT OF AGRICULTURAL MANAGEMENT

In evaluation of soil quality for agricultural use, soil structure is one of the most important properties, which is influenced not only by climate, biological activity, and management practices but also by mechanical and physico-chemical forces acting in the soil. The purpose of this study was to evaluate the influence of conventional agricultural management on the structure and microstructure of a Latossolo Vermelho distroférrico típico (Rhodic Hapludox) in an experimental area planted to maize. Soil morphology was described using the crop profile method by identifying the distinct structural volumes called Morphologically Homogeneous Units (MHUs). For comparison, we also described a profile in an adjacent area without agricultural use and under natural regrowth referred to as Memory. We took undisturbed samples from the main MHUs so as to form thin sections and blocks of soil for micromorphological and micromorphometrical analyses. Results from the application of the crop profile method showed the occurrence of the following structural types: loose (L), fragmented (F) and continuous (C) in both profiles analyzed. In the Memory soil profile, the fragmented structures were classified as Fptμ∆+tf and Fmt∆μ, whose micromorphology shows an enaulic-porphyric (porous) relative distribution with a great deal of biological activity as indicated by the presence of vughs and channels. Lower down, from 0.20 to 0.35 m, there was a continuous soil volume (sub-type C∆μ), with a subangular block microstructure and an enaulic-porphyric relative distribution, though in this case more compact and with aggregate coalescence and less biological activity. The micromorphometrical study of the soil of the Memory Plot showed the predominance of complex pores in NAM (15.03 %), Fmt∆μ (11.72 %), and Fptμ∆+tf (7.73 %), and rounded pores in C∆μ (8.21 %). In the soil under conventional agricultural management, we observed fragmented structures similar to the Memory Plot from 0.02 to 0.20 m, followed by a volume with a compact continuous structure (C∆μ), without visible porosity and with few roots. In the MHUs under conventional management, reduction in the packing pores (40 %) was observed, mainly in the continuous units (C). The microstructure had well-defined blocks, with the occurrence of planar pores and less evidence of biological activity. In conclusion, the morphological and micromorphological analyses of the soil profiles studied offered complementary information regarding soil structural quality, especially concerning the changes in pore types as result of mechanical stress undergone by the soil.

Occurrence and Structure of Arbuscular Mycorrhizal Fungal Communities in Cassava after Cultivation of Cover Crops as Observed by the “PCR-DGGE” Technique

ABSTRACT Cassava (Manihot esculenta Crantz) is a highly mycotrophic crop, and prior soil cover may affect the density of arbuscular mycorrhizal fungi (AMFs), as well as the composition of the AMFs community in the soil. The aim of this study was to evaluate the occurrence and the structure of AMFs communities in cassava grown after different cover crops, and the effect of the cover crop on mineral nutrition and cassava yield under an organic farming system. The occurrence and structure of the AMFs community was evaluated through polymerase chain reaction (PCR) and denaturing gradient gel electrophoresis (DGGE). A randomized block experimental design was used with four replications. Six different cover crop management systems before cassava were evaluated: black oats, vetch, oilseed radish, intercropped oats + vetch, intercropped oats + vetch + oilseed radish, plus a control (fallow) treatment mowed every 15 days. Oats as a single crop or oats intercropped with vetch or with oilseed radish increased AMFs inoculum potential in soil with a low number of propagules, thus benefiting mycorrhizal colonization of cassava root. The treatments did not affect the structure of AMFs communities in the soil since the AMFs communities were similar in cassava roots in succession to different cover crops. AMFs colonization was high despite high P availability in the soil. The cassava crop yield was above the regional average, and P levels in the leaves were adequate, regardless of which cover crop treatments were used. One cover crop cycle prior to the cassava crop was not enough to observe a significant response in variables, P in plant tissue, crop yield, and occurrence and structure of AMFs communities in the soil. In the cassava roots in succession, the plant developmental stage affected the groupings of the structure of the AMF community.

Epithelial sodium channel/degenerin family of ion channels: a variety of functions for a shared structure.

The recently discovered epithelial sodium channel (ENaC)/degenerin (DEG) gene family encodes sodium channels involved in various cell functions in metazoans. Subfamilies found in invertebrates or mammals are functionally distinct. The degenerins in Caenorhabditis elegans participate in mechanotransduction in neuronal cells, FaNaC in snails is a ligand-gated channel activated by neuropeptides, and the Drosophila subfamily is expressed in gonads and neurons. In mammals, ENaC mediates Na+ transport in epithelia and is essential for sodium homeostasis. The ASIC genes encode proton-gated cation channels in both the central and peripheral nervous system that could be involved in pain transduction. This review summarizes the physiological roles of the different channels belonging to this family, their biophysical and pharmacological characteristics, and the emerging knowledge of their molecular structure. Although functionally different, the ENaC/DEG family members share functional domains that are involved in the control of channel activity and in the formation of the pore. The functional heterogeneity among the members of the ENaC/DEG channel family provides a unique opportunity to address the molecular basis of basic channel functions such as activation by ligands, mechanotransduction, ionic selectivity, or block by pharmacological ligands.

Phase behavior and rheological analysis of reverse liquid crystals and W/I2, W/H2 gel emulsions using an amphiphilic block copolymer.

This article reports the phase behavior determi- nation of a system forming reverse liquid crystals and the formation of novel disperse systems in the two-phase region. The studied system is formed by water, cyclohexane, and Pluronic L-121, an amphiphilic block copolymer considered of special interest due to its aggregation and structural proper- ties. This system forms reverse cubic (I2) and reverse hexagonal (H2) phases at high polymer concentrations. These reverse phases are of particular interest since in the two-phase region, stable high internal phase reverse emulsions can be formed. The characterization of the I2 and H2 phases and of the derived gel emulsions was performed with small-angle X-ray scattering (SAXS) and rheometry, and the influence of temperature and water content was studied. TheH2 phase experimented a thermal transition to an I2 phase when temperature was increased, which presented an Fd3m structure. All samples showed a strong shear thinning behavior from low shear rates. The elasticmodulus (G0) in the I2 phase was around 1 order of magnitude higher than in theH2 phase. G0 was predominantly higher than the viscousmodulus (G00). In the gel emulsions,G0 was nearly frequency-independent, indicating their gel type nature. Contrarily to water-in-oil (W/O) normal emulsions, in W/I2 and W/H2 gel emulsions, G0, the complex viscosity (|η*|), and the yield stress (τ0) decreased with increasing water content, since the highly viscous microstructure of the con- tinuous phase was responsible for the high viscosity and elastic behavior of the emulsions, instead of the volumefraction of dispersed phase and droplet size. A rheological analysis, in which the cooperative flow theory, the soft glass rheology model, and the slip plane model were analyzed and compared, was performed to obtain one single model that could describe the non-Maxwellian behavior of both reverse phases and highly concentrated emulsions and to characterize their microstructure with the rheological properties.

Probing MST1 Kinase Sequence and Structure for Rational Drug Discovery (Targeting diabetes by blocking protein-protein interactions)

Apoptotic beta cell death is an underlying cause majorly for type I and to a lesser extent for type II diabetes. Recently, MST1 kinase was identified as a key apoptotic agent in diabetic condition. In this study, I have examined MST1 and closely related kinases namely, MST2, MST3 and MST4, aiming to tackle diabetes by exploring ways to selectively block MST1 kinase activity. The first investigation was directed towards evaluating possibilities of selectively blocking the ATP binding site of MST1 kinase that is essential for the activity of the enzymes. Structure and sequence analyses of this site however revealed a near absolute conservation between the MSTs and very few changes with other kinases. The observed residue variations also displayed similar physicochemical properties making it hard for selective inhibition of the enzyme. Second, possibilities for allosteric inhibition of the enzyme were evaluated. Analysis of the recognized allosteric site also posed the same problem as the MSTs shared almost all of the same residues. The third analysis was made on the SARAH domain, which is required for the dimerization and activation of MST1 and MST2 kinases. MST3 and MST4 lack this domain, hence selectivity against these two kinases can be achieved. Other proteins with SARAH domains such as the RASSF proteins were also examined. Their interaction with the MST1 SARAH domain were evaluated to mimic their binding pattern and design a peptide inhibitor that interferes with MST1 SARAH dimerization. In molecular simulations the RASSF5 SARAH domain was shown to strongly interact with the MST1 SARAH domain and possibly preventing MST1 SARAH dimerization. Based on this, the peptidic inhibitor was suggested to be based on the sequence of RASSF5 SARAH domain. Since the MST2 kinase also interacts with RASSF5 SARAH domain, absolute selectivity might not be achieved.

Self-assembly of PS-PVP block copolymers and their complexes at the air/water interface

Une compréhension approfondie et un meilleur contrôle de l'auto-assemblage des copolymères diblocs (séquencés) et de leurs complexes à l'interface air/eau permettent la formation contrôlée de nanostructures dont les propriétés sont connues comme alternative à la nanolithographie. Dans cette thèse, des monocouches obtenues par les techniques de Langmuir et de Langmuir-Blodgett (LB) avec le copolymère dibloc polystyrène-poly(4-vinyl pyridine) (PS-PVP), seul ou complexé avec de petites molécules par liaison hydrogène [en particulier, le 3-n-pentadécylphénol (PDP)], ont été étudiées. Une partie importante de notre recherche a été consacrée à l'étude d'une monocouche assemblée atypique baptisée réseau de nanostries. Des monocouches LB composées de nanostries ont déjà été rapportées dans la littérature mais elles coexistent souvent avec d'autres morphologies, ce qui les rend inutilisables pour des applications potentielles. Nous avons déterminé les paramètres moléculaires et les conditions expérimentales qui contrôlent cette morphologie, la rendant très reproductible. Nous avons aussi proposé un mécanisme original pour la formation de cette morphologie. De plus, nous avons montré que l'utilisation de solvants à haut point d’ébullition, non couramment utilisés pour la préparation des films Langmuir, peut améliorer l'ordre des nanostries. En étudiant une large gamme de PS-PVP avec des rapports PS/PVP et des masses molaires différents, avec ou sans la présence de PDP, nous avons établi la dépendance des types principaux de morphologie (planaire, stries, nodules) en fonction de la composition et de la concentration des solutions. Ces observations ont mené à une discussion sur les mécanismes de formation des morphologies, incluant la cinétique, l’assemblage moléculaire et l’effet du démouillage. Nous avons aussi démontré pour la première fois que le plateau dans l'isotherme des PS-PVP/PDP avec morphologie de type nodules est relié à une transition ordre-ordre des nodules (héxagonal-tétragonal) qui se produit simultanément avec la réorientation du PDP, les deux aspects étant clairement observés par AFM. Ces études ouvrent aussi la voie à l'utilisation de films PS-PVP/PDP ultraminces comme masque. La capacité de produire des films nanostructurés bien contrôlés sur différents substrats a été démontrée et la stabilité des films a été vérifiée. Le retrait de la petite molécule des nanostructures a fait apparaître une structure interne à explorer lors d’études futures.

Conception, synthèse et diversification de l'azaGly-Pro : un mime de tour beta, outil d'étude structure-activité : application au développement d'un nouvel agent tocolytique

Les accouchements prématurés constituent un problème médical majeur en constante augmentation et ce, malgré tous les efforts mis en œuvre afin de contrer le déclenchement des contractions avant terme. Cette thèse relate du ''design'' rationnel d'un nouvel agent thérapeutique (i.e., tocolytique) qui serait capable de 1) arrêter les contractions, et 2) prolonger la gestation. Pour ce faire, une nouvelle cible, la prostaglandine F2α et son récepteur ont été sélectionnés et le peptidomimétisme a été choisi afin de résoudre cette problématique. L'introduction contient un historique rapide de la conception à la synthèse (''drug design'') du peptide parent, le PDC113, premier peptide a avoir démontré des aptitudes tocolytiques suffisantes pour faire du peptidomimétisme. La deuxième partie de l'introduction présente les concepts du peptidomimétisme appliqués au PDC113 qui ont permis d'accéder au PDC113.824, inhibiteur allostérique du récepteur de la prostaglandine F2α, et explique comment ce mime nous a permis d'élucider les mécanismes de signalisation intracellulaire impliqués dans la contraction musculaire lisse. Cette thèse présente la conception, la synthèse et l'étude structure-activité de mimes de repliement de tour β au sein du mime peptidique original (PDC113.824) dans lequel nous avons remplacé l'azabicycloalkane central (l'indolizidin-2-one) par une série d'autres azabicycloalcanes connus et des acides aza-aminés dont nous avons élaboré la synthèse. Dans un premier temps, une nouvelle stratégie de synthèse en solution de l'aza-glycyl-proline à partir de la diphényle hydrazone et du chloroformate de p-nitrophényle a été réalisée. Cette stratégie a permis d'éliminer les réactions secondaires de cyclisation intramoléculaires communément obtenues lors de l'introduction d'acides aza-aminés avec les protections traditionnelles de type carbamate en présence de phosgène, mais aussi de faciliter l'accès en une étape à des dérivés peptidiques du type aza-glycyle. L'élongation de l'aza-glycyl-proline en solution nous a permis d'accéder à un nouveau mime tetrapeptidique du Smac, un activateur potentiel de l'apoptose au sein de cellules cancéreuses. Par la suite, nous avons développé une stratégie de diversification sélective de l'azote α du résidu azaglycine en utilisant différents types d'halogénures d'alkyle en présence de tert-butoxyde de potassium. Afin de valider le protocole d'alkylation de l'aza-dipeptide, différents halogénures d'alkyle ont été testés. Nous avons également démontré l'utilité des aza-dipeptides résultants en tant que ''building block'' afin d'accéder à une variété d'azapeptides. En effet, l'aza-dipeptide a été déprotégée sélectivement soit en N-terminal soit en C-terminal, respectivement. D'autre part, la libération de l'amine de l'ester méthylique de l'aza-alkylglycyl-proline a conduit à une catégorie de composés à potentiel thérapeutique, les azadicétopipérazines (aza-DKP) par cyclisation intramoléculaire. Enfin, notre intérêt quant au développement d'un nouvel agent tocolytique nous a amené à développer une nouvelle voie de synthèse en solution du PDC113.824 permettant ainsi d'élucider les voies de signalisation intracellulaires du récepteur de la prostaglandine F2α. Afin de valider l'importance de la stéréochimie et d'étudier la relation structure/ activité du mime, nous avons remplacé l'indolizidin-2-one (I2aa) centrale du PDC113.824 par une série d'autres azabicycloalcanes et azadipeptides. Les azabicycloalcanes D-I2aa, quinolizidinone, et indolizidin-9-one ont été synthétisés et incorporés au sein du dit peptide ne donnant aucune activité ni in vitro ni ex vivo, validant ainsi l'importance du tour β de type II' pour le maintien de l'activité biologique du PDC113.824. Finalement, l'insertion d'une série de dérivés aza(alkyl)glycyl-prolyles a mené à de nouveaux inhibiteurs allostériques du récepteur de la PGF2α, l'un contenant l'azaglycine et l'autre, l'azaphénylalanine. Cette thèse a ainsi contribué, grâce à la conception et l'application de nouvelles méthodes de synthèse d'aza-peptides, au développement de nouveaux composés à potentiel thérapeutique afin d'inhiber le travail prématuré.

New stimuli-responsive block random copolymers and their aggregation

Les polymères sensibles à des stimuli ont été largement étudiés ces dernières années notamment en vue d’applications biomédicales. Ceux-ci ont la capacité de changer leurs propriétés de solubilité face à des variations de pH ou de température. Le but de cette thèse concerne la synthèse et l’étude de nouveaux diblocs composés de deux copolymères aléatoires. Les polymères ont été obtenus par polymérisation radicalaire contrôlée du type RAFT (reversible addition-fragmentation chain-transfer). Les polymères à bloc sont formés de monomères de méthacrylates et/ou d’acrylamides dont les polymères sont reconnus comme thermosensibles et sensible au pH. Premièrement, les copolymères à bloc aléatoires du type AnBm-b-ApBq ont été synthétisés à partir de N-n-propylacrylamide (nPA) et de N-ethylacrylamide (EA), respectivement A et B, par polymérisation RAFT. La cinétique de copolymérisation des poly(nPAx-co-EA1-x)-block-poly(nPAy-co-EA1-y) et leur composition ont été étudiées afin de caractériser et évaluer les propriétés physico-chimiques des copolymères à bloc aléatoires avec un faible indice de polydispersité . Leurs caractères thermosensibles ont été étudiés en solution aqueuse par spectroscopie UV-Vis, turbidimétrie et analyse de la diffusion dynamique de la lumière (DLS). Les points de trouble (CP) observés des blocs individuels et des copolymères formés démontrent des phases de transitions bien définies lors de la chauffe. Un grand nombre de macromolécules naturels démontrent des réponses aux stimuli externes tels que le pH et la température. Aussi, un troisième monomère, 2-diethylaminoethyl methacrylate (DEAEMA), a été ajouté à la synthèse pour former des copolymères à bloc , sous la forme AnBm-b-ApCq , et qui offre une double réponse (pH et température), modulable en solution. Ce type de polymère, aux multiples stimuli, de la forme poly(nPAx-co-DEAEMA1-x)-block-poly(nPAy-co-EA1-y), a lui aussi été synthétisé par polymérisation RAFT. Les résultats indiquent des copolymères à bloc aléatoires aux propriétés physico-chimiques différentes des premiers diblocs, notamment leur solubilité face aux variations de pH et de température. Enfin, le changement d’hydrophobie des copolymères a été étudié en faisant varier la longueur des séquences des blocs. Il est reconnu que la longueur relative des blocs affecte les mécanismes d’agrégation d’un copolymère amphiphile. Ainsi avec différents stimuli de pH et/ou de température, les expériences effectuées sur des copolymères à blocaléatoires de différentes longueurs montrent des comportements d’agrégation intéressants, évoluant sous différentes formes micellaires, d’agrégats et de vésicules.