Simulation de profils de gravure et de dépôt à l’échelle du motif pour l’étude des procédés de microfabrication utilisant une source plasma de haute densité à basse pression

En lien avec l’avancée rapide de la réduction de la taille des motifs en microfabrication, des processus physiques négligeables à plus grande échelle deviennent dominants lorsque cette taille s’approche de l’échelle nanométrique. L’identification et une meilleure compréhension de ces différents processus sont essentielles pour améliorer le contrôle des procédés et poursuivre la «nanométrisation» des composantes électroniques. Un simulateur cellulaire à l’échelle du motif en deux dimensions s’appuyant sur les méthodes Monte-Carlo a été développé pour étudier l’évolution du profil lors de procédés de microfabrication. Le domaine de gravure est discrétisé en cellules carrées représentant la géométrie initiale du système masque-substrat. On insère les particules neutres et ioniques à l’interface du domaine de simulation en prenant compte des fonctions de distribution en énergie et en angle respectives de chacune des espèces. Le transport des particules est effectué jusqu’à la surface en tenant compte des probabilités de réflexion des ions énergétiques sur les parois ou de la réémission des particules neutres. Le modèle d’interaction particule-surface tient compte des différents mécanismes de gravure sèche telle que la pulvérisation, la gravure chimique réactive et la gravure réactive ionique. Le transport des produits de gravure est pris en compte ainsi que le dépôt menant à la croissance d’une couche mince. La validité du simulateur est vérifiée par comparaison entre les profils simulés et les observations expérimentales issues de la gravure par pulvérisation du platine par une source de plasma d’argon.

Petrography, Geochemistry and Diagenesis of Coral Deposits of Kavaratti and Minicoy Islands, Lakshadweep, India

In the present thesis the petrographic, geochemical and digenetic variability of the sediments in the islands of Kavaratti and Minicoy has been investigated .The beach profile studies show that in the Kavaratti lagoon beach, the slope is steeper in the southern and south central part than in the northern end’s marginal deposition is taking place in the northern end of the Kavaratti island, whereas a marginal erosion is observed at the southern end. In Minicoy the slope of the lagoon beach is gentle in the south and is slightly steeper at the northern part of the beach. The southern and northern beach sections show a marginal deposition. Based on the mineralogical and geochemical studies it is concluded that the main digenetic changes observed is the transformation of aragonite to LMC.The transformation takes place mainly in the vadose zone and is caused by the abundance of fresh water infiltration.

EFFECT OF COLD FRONTS ON THE BENTHIC MACROFAUNA OF EXPOSED SANDY BEACHES WITH CONTRASTING MORPHODYNAMICS

The aim of this study was to determine the short-term environmental changes caused by the simultaneous passage of a high energy event on two sandy beaches with different morphodynamic states and their influence on the richness, abundance and distribution of the benthic macrofauna. Two microtidal exposed sandy beaches with contrasting morphodynamics were simultaneously sampled before, during and after the passage of two cold fronts in Santa Catarina. The reflective beach showed a higher susceptibility to the increase in wave energy produced by the passage of cold fronts and was characterized by rapid and intense erosive processes in addition to a capacity for rapid restoration of the beach profile. As regards the dissipative beach, erosive processes operated more slowly and progressively, and it was characterized further by a reduced capacity for the recovery of its sub-aerial profile. Although the intensity of the environmental changes was distinct as between the morphodynamic extremes, changes in the composition, richness and abundance of macrobenthos induced by cold fronts were not evident for either of the beaches studied. On the other hand, alterations in the distribution pattern of the macrofauna were observed on the two beaches and were related to variations in sea level, position of the swash zone and moisture gradient, suggesting that short-term accommodations in the spatial structure of the macrobenthos occur in response to changes in environmental conditions in accordance with the temporal dynamics characteristic of each morphodynamic state.

Dinâmica Costeira dos Campos petrolíferos Macau/Serra, litoral setentrional do Estado do Rio Grande do Norte

This thesis describes the general behavior of the northern shore of the State of Rio Grande do Norte relating beach profile morphology with hydrodynamic and sedimentological parameters. The Macau and Serra Oil Field are inserted on this area and are under accelerated coastal erosion. At these oil fields are installed oil wells from PETROBRAS, nowadays located directly in the shoreline, under constant attacks of coastal processes (e.g. waves, tides and currents), which promote an intense morphodynamic variability of this sandy coast. The area was monitored for 24 months in three different stations (P01, P02 and P03). The methodology applied involved current techniques of beach profiles, hydrodynamical processes, remote sensing and geophysics. A synthesis of results obtained through the use of different time scales (monthly, lunar cycle, seasonal, annual) from a coastal dynamics study is presented. The average wind direction corresponded to 77ºAz (NE). The steepness of the berm and of the shoreface, as well as coastal current direction, do not present major changes, with an average of 36º for the steepness of the berm, 15º for the shoreface and 15º for the coastal current direction. This data set allows us to infer that the months of larger coastal erosion were November/2000 and April/2001, because of the largest wave parameter during this time. The months of worse coastal erosion in this area are related with the increasing wavy energy. This in turn, seems to be related to seasonal climatic variations, with the wave energy and tide currents speed increasing during months of minor precipitations (June to January). The months of worse coastal erosion were September and November, when the largest wave parameters and speed currents are measured in the area. Since these months are included on the period of minor precipitations, we related the coastal erosion to seasonal climatic variations. The results obtained during these 24 months of monitoring confirms a situation of accentuated erosion, mainly in Profile 03 (Barra do Corta-Cachorro), where the wave height, period, and coastal current speed are always larger than the values found in Profile 02 (Macau5). Probably these values are more expressive in Profile 03, because it does not present any natural structure of protection against the wave impacts, as the barrier island located at Ponta do Tubarão, or the sand banks in front of Macau5. The transport of the sediments occurs from East to West, and the sand accumulation is more pronounced on Profile 03 intertidal zone, where there are embrionary dunes in dryer months. The tidal currents speed, on the other hand, is more accentuated in the Macau5 area (Profile 02). At Ponta do Tubarão, the tidal currents presented a preferential direction for NE, at times of flood, currents and for NW, at times of ebb current; at Barra do Corta-Cachorro the direction of the currents were predominantly for NW, independent of the tide phase, coinciding with the preferential direction of the longshore current. This currents inversion at Ponta do Tubarão is attributed to the presence of the Ponta do Tubarão island barrier and by the communication channel of the lagoon with the sea. The tide currents are better observed in protected areas, as in the Ponta do Tubarão, when they present inversion in their direction accordingly to the flood and ebb tide. In open areas, as in Barra do Corta-Cachorro, the tide currents are overprinted by the longshore currents. Sediment analysis does not show important modifications in grain size related to seasonality (dry- and rainy seasons). On the foreshore and backshore zones, the sediments vary from fine to medium sand, while in the shoreface they very from fine to very sands. The grains are mostly spheres, varying from sub rounded to sub angled. Quartz is the main component alongside Feldspat and heavy minerals as accessory components. Biogenic content is also present and mainly represented by mollusks fragments. The calculated sediment transport show values around 100 m3/day. The morphodynamic studies indicated that this is a reflexive area from October to April, and intermediate from May to September. The Relative Tide Range-RTR for this area is 4 < RTR < 15, and so classified in the mixed wave-tide group. Having this exposed we can affirm that the more active natural factors in this area are the currents, followed by the tides and the winds. The anthropic factors are exclusively local and punctual (Macau and Serra Oil Field). Taking in account the economic importance of the area, as well as the intensity of coastal processes acting on this shore, it is important a continuity of the monthly environmental monitoring looking for variations on longer-period cycles. These data have been stored on the geo-referenced database of the projects MARPETRO and PETRORISCO (REDE 05), aiming to model the coastal and sea environment, susceptible to oil spills and their derivatives

Mineralogia e geoquímica da ocorrência de palygorskita de Alcântara, bacia de S. Luís-Grajaú, Maranhão

A Formação Alcântara (bacia de São Luis-Grajaú, região de Alcântara, MA) é constituída por pelitos, arenitos e dolomitos. Esses litotipos representam uma sucessão progradacional de depósitos de laguna/washover e canal de maré sobrepondo-se a depósitos de shoreface gerados por processos de tempestade. O presente trabalho tem como objetivo principal à caracterização mineralógica e geoquímica dos argilominerais que ocorrem nos níveis pelíticos da Formação Alcântara, especialmente a palygorskita. Foi descrito e amostrado um perfil geológico na praia da Baronesa, na cidade de Alcântara, MA, no qual foram coletadas 8 amostras, que após a preparação em laboratório, foram submetidas a análises mineralógicas e químicas por difração de raios X, fluorescência de raios X, análises térmicas e microscopia eletrônica de varredura. Os resultados mostraram que o perfil da praia da Baronesa é composto por arenitos na base, seguido de pelitos dominantes, com intercalações de dolomitos. Nos pelitos, foram descritos uma ampla assembléia de argilominerais, em ambiente lagunar, com variações no conteúdo de palygorskita, clorita, illita, esmectita e traços de caulinita. Observam-se ainda traços de dolomita, calcita e feldspatos. Os teores de palygorskita e dolomita (níveis dolomíticos) são acentuados, sugerindo que as condições climáticas durante o período de deposição foram áridas a semi-áridas. Duas gerações de palygorskita foram descritas: uma na forma de bolsões ou acumulações macroscópicas nos níveis pelíticos ricos em esmectita, freqüentemente descritas na literatura, e outra na forma maciça, como o mineral dominante dos níveis pelíticos superiores do perfil da praia da Baronesa. Essa segunda geração está sendo descrita pela primeira vez, neste trabalho, podendo constituir em níveis métricos e que podem revelar interesse econômico.

Morphodynamics of structurally controlled headland-bay beaches in southeastern Brazil: A review

This paper presents a comprehensive review on the interaction between hydrodynamic processes, beach morphology and sedimentology at large scale coastal behaviour along the coastline of Santa Catarina, between Laguna and Sao Francisco Island, a microtidal east coast swell environment with headland and bay geomorphologies. The parabolic bay shape equation has proven to be a convenient and practical tool for studying the stability of the headland-bay beaches, tombolos, and salients in Santa Catarina. The beaches exhibit different patterns of sediment removal as a function of the degree of beach curvature. In highly curved beaches, there is a well-developed shadow zone and a range of morphodynamic conditions, from a sheltered low-energy beach adjacent to the downdrift headland to a high-energy exposed beach on the straight end of the headland-bay beach. The less curved beaches instead, tend to show more uniform behaviour since they are directly exposed to incident waves. There is no obvious relationship between average wave height and mean grain size, showing the importance of sediment source to characterize the sedimentary distribution patterns in the study area. The analysis of beaches showed that beach morphodynamics and sequence profiles for a bay-headland coast in a microtidal east coast environment is a function of geological inheritance (e.g., distance between headlands and orientation, nearshore and inner shelf morphology, coastal plain morphology, and sediment source), and hydrodynamic factors (wave conditions, oceanic wave exposure and relative tidal range). (C) 2009 Elsevier B.V. All rights reserved.

Medición del transporte de cantos en la playa de San Felipe, Gran Canaria

Máster Oficial en Gestión Costera

Studio della maturazione di formaggi pecorino stagionati in stabilimento e in grotta

Aims: Ripening evaluation of two different Pecorino cheese varieties ripened according either to a traditional method in plant and in cave. Different ripening features have been analyzed in order to evaluate the cave as possible ripening environment with the aim of obtaining a peculiar product which could also establish an added value to the cultural heritage of the local place in which it has been originally manufactured. Methods and Results: Chemical-physical features of Pecorino cheese have been initially analyzed into two different ripening environments and experimentations, among which: pH, weight reduction and subsequent water activity. Furthermore, the microbial composition has been characterized in relationship with the two different ripening environments, undertaking a variety of microbial groups, such as: lactic bacteria, staphylococci, yeasts, lactococci, enterobacteria, enterococci. Besides, an additional analysis for the in-cave adaptability evaluation has been the identification of biogenic amines inside the Pecorino cheese (2-phenilethylamine, putrescine, cadaverine, hystidine, tyramine, spermine and spermidine). Further analysis were undertaken in order to track the lipid profile evolution, reporting the concentration of the cheese free fatty acids in object, in relation with ripening time, environment and production. In order to analyse the flavour compounds present in Pecorino cheese, the SPME-GC-MS technique has been widely employed. As a result, it is confirmed the trend showed by the short-chain free fatty acids, that is to say the fatty acids which are mostly involved in conveying a stronger flavor to the cheese. With the purpose of assessing the protheolytic patterns of the above-mentioned Pecorino cheese in the two different ripening environments and testing methods, the technique SDS-PAGE has been employed into the cheese insoluble fraction, whereas the SDS-PAGE technique has been carried out into the cheese soluble portion. Furthermore, different isolated belonging to various microbial groups have been genotypically characterized though the ITS-PCR technique with the aim to identify the membership species. With reference to lactic bacillus the characterized species are: Lactobacillus brevis, Lactobacillus curvatus and Lactobacillus paraplantarum. With reference to lactococci the predominant species is Lactococcus lactis, coming from the employed starter used in the cheese manufacturing. With reference to enterococcus, the predominant species are Enterococcus faecium and Enterococcus faecalis. Moreover, Streptococcus termophilus and Streptococcus macedonicus have been identified too. For staphylococci the identified species are Staphyilococcus equorum, Staphylococcus saprophyfiticus and Staphylococcus xylosus. Finally, a sensorial analysis has been undertaken through on one side a consumer test made by inexperienced consumers, and on the other side through a panel test achieved by expert consumers. From such test Pecorino cheese ripened in cave were found to be more pleasant in comparison with Pecorino cheese ripened in plant. Conclusions: The proposed approach and the undertaken analysis showed the cave as preferential ripening environment for Pecorino cheese and for the development of a more palatable product and safer for consumers’ health.

Potential vorticity and moisture in extratropical cyclones : climatology and sensitivity experiments

The development of extratropical cyclones can be seen as an interplay of three positive potential vorticity (PV) anomalies: an upper-level stratospheric intrusion, low-tropospheric diabatically produced PV, and a warm anomaly at the surface acting as a surrogate PV anomaly. In the mature stage they become vertically aligned and form a “PV tower” associated with strong cyclonic circulation. This paradigm of extratropical cyclone development provides the basis of this thesis, which will use a climatological dataset and numerical model experiments to investigate the amplitude of the three anomalies and the processes leading in particular to the formation of the diabatically produced low-tropospheric PV anomaly.rnrnThe first part of this study, based on the interim ECMWF Re-Analysis (ERA-Interim) dataset, quantifies the amplitude of the three PV anomalies in mature extratropical cyclones in different regions in the Northern Hemisphere on a climatological basis. A tracking algorithm is applied to sea level pressure (SLP) fields to identify cyclone tracks. Surface potential temperature anomalies ∆θ and vertical profiles of PV anomalies ∆PV are calculated at the time of the cyclones’ minimum SLP and during the intensification phase 24 hours before in a vertical cylinder with a radius of 200 km around the surface cyclone center. To compare the characteristics of the cyclones, they are grouped according to their location (8 regions) and intensity, where the central SLP is used as a measure of intensity. Composites of ∆PV profiles and ∆θ are calculated for each region and intensity class at the time of minimum SLP and during the cyclone intensification phase.rnrnDuring the cyclones’ development stage the amplitudes of all three anomalies increase on average. In the mature stage all three anomalies are typically larger for intense than for weak winter cyclones [e.g., 0.6 versus 0.2 potential vorticity units (PVU) at lower levels, and 1.5 versus 0.5 PVU at upper levels].rnThe regional variability of the cyclones’ vertical structure and the profile evolution is prominent (cyclones in some regions are more sensitive to the amplitude of a particular anomaly than in other regions). Values of ∆θ and low-level ∆PV are on average larger in the western parts of the oceans than in the eastern parts. In addition, a large seasonal variability can be identified, with fewer and weaker cyclones especially in the summer, associated with higher low-tropospheric PV values, but also with a higher tropopause and much weaker surface potential temperature anomalies (compared to winter cyclones).rnrnIn the second part, we were interested in the diabatic low-level part of PV towers. Evaporative sources were identified of moisture that was involved in PV production through condensation. Lagrangian backward trajectories were calculated from the region with high PV values at low-levels in the cyclones. PV production regions were identified along these trajectories and from these regions a new set of backward trajectories was calculated and moisture uptakes were traced along them. The main contribution from surface evaporation to the specific humidity of the trajectories is collected 12-72 hours prior to therntime of PV production. The uptake region for weaker cyclones with less PV in the centre is typically more localized with reduced uptake values compared to intense cyclones. However, in a qualitative sense uptakes and other variables along single trajectories do not vary much between cyclones of different intensity in different regions.rnrnA sensitivity study with the COSMO model comprises the last part of this work. The study aims at investigating the influence of synthetic moisture modification in the cyclone environment in different stages of its development. Moisture was eliminated in three regions, which were identified as important moisture source regions for PV production. Moisture suppression affected the cyclone the most in its early phase. It led to cyclolysis shortly after its genesis. Nevertheles, a new cyclone formed on the other side of a dry box and developed relatively quickly. Also in other experiments, moisture elimination led to strong intensity reduction of the surface cyclone, limited upper-level development, and delayed or missing interaction between the two.rnrnIn summary, this thesis provides novel insight into the structure of different intensity categories of extratropical cyclones from a PV perspective, which corroborates the findings from a series of previous case studies. It reveals that all three PV anomalies are typically enhanced for more intense cyclones, with important regional differences concerning the relative amplitude of the three anomalies. The moisture source analysis is the first of this kind to study the evaporation-condensation cycle related to the intensification of extratropical cyclones. Interestingly, most of the evaporation occurs during the 3 days prior to the time of maximum cyclone intensity and typically extends over fairly large areas along the track of the cyclone. The numerical model case study complements this analysis by analyzing the impact of regionally confined moisture sources for the evolution of the cyclone.

Effect of ion flux on helium retention in helium-irradiated tungsten

Helium retention in irradiated tungsten leads to swelling, pore formation, sample exfoliation and embrittlement with deleterious consequences in many applications. In particular, the use of tungsten in future nuclear fusion plants is proposed due to its good refractory properties. However, serious concerns about tungsten survivability stems from the fact that it must withstand severe irradiation conditions. In magnetic fusion as well as in inertial fusion (particularly with direct drive targets), tungsten components will be exposed to low and high energy ion (helium) irradiation, respectively. A common feature is that the most detrimental situations will take place in pulsed mode, i.e., high flux irradiation. There is increasing evidence on a correlation between a high helium flux and an enhancement of detrimental effects on tungsten. Nevertheless, the nature of these effects is not well understood due to the subtleties imposed by the exact temperature profile evolution, ion energy, pulse duration, existence of impurities and simultaneous irradiation with other species. Physically based Kinetic Monte Carlo is the technique of choice to simulate the evolution of radiation-induced damage inside solids in large temporal and space scales. We have used the recently developed code MMonCa (Modular Monte Carlo simulator), presented in this conference for the first time, to study He retention (and in general defect evolution) in tungsten samples irradiated with high intensity helium pulses. The code simulates the interactions among a large variety of defects and impurities (He and C) during the irradiation stage and the subsequent annealing steps. In addition, it allows us to vary the sample temperature to follow the severe thermo-mechanical effects of the pulses. In this work we will describe the helium kinetics for different irradiation conditions. A competition is established between fast helium cluster migration and trapping at large defects, being the temperature a determinant factor. In fact, high temperatures (induced by the pulses) are responsible for large vacancy cluster formation and subsequent additional trapping with respect to low flux irradiation.

Effect of ion flux on helium retention in helium-irradiated tungsten

Helium retention in irradiated tungsten leads to swelling, pore formation, sample exfoliation and embrittlement with deleterious consequences in many applications. In particular, the use of tungsten in future nuclear fusion plants is proposed due to its good refractory properties. However, serious concerns about tungsten survivability stems from the fact that it must withstand severe irradiation conditions. In magnetic fusion as well as in inertial fusion (particularly with direct drive targets), tungsten components will be exposed to low and high energy ion irradiation (helium), respectively. A common feature is that the most detrimental situations will take place in pulsed mode, i.e., high flux irradiation. There is increasing evidence of a correlation between a high helium flux and an enhancement of detrimental effects on tungsten. Nevertheless, the nature of these effects is not well understood due to the subtleties imposed by the exact temperature profile evolution, ion energy, pulse duration, existence of impurities and simultaneous irradiation with other species. Object Kinetic Monte Carlo is the technique of choice to simulate the evolution of radiation-induced damage inside solids in large temporal and space scales. We have used the recently developed code MMonCa (Modular Monte Carlo simulator), presented at COSIRES 2012 for the first time, to study He retention (and in general defect evolution) in tungsten samples irradiated with high intensity helium pulses. The code simulates the interactions among a large variety of defects and during the irradiation stage and the subsequent annealing steps. The results show that the pulsed mode leads to significantly higher He retention at temperatures higher than 700 K. In this paper we discuss the process of He retention in terms of trap evolution. In addition, we discuss the implications of these findings for inertial fusion.

Dominant wave energy and sediment movement on intertidal beaches in Freshwater Bay, Washington, U.S.A.

Freshwater Bay (FWB), Washington did not undergo significant erosion of its shoreline after the construction of the Elwha and Glines Canyon Dams, unlike the shoreline east of Angeles Point (the Elwha River’s lobate delta). In this paper I compare the wave energy density in the western and eastern ends of the Strait of Juan de Fuca with the wave energy density at the Elwha River delta. This indicates seasonal high- and low-energy regimes in the energy density data. I group multi-year surveys of four cross-shore transects in FWB along this seasonal divide and search for seasonal trends in profile on the foreshore. After documenting changes in elevation at specific datums on the foreshore, I compare digital images of one datum to determine the particle sizes that are transported during deposition and scour events on this section of the FWB foreshore. Repeat surveys of four cross-shore transects over a five-year period indicate a highly mobile slope break between the upper foreshore and the low-tide delta. Post-2011, profiles in eastern FWB record deposition in the landward portion of the low-tide terrace and also in the upper intertidal. Western FWB experiences transient deposition on the low-tide terrace and high intra-annual variability in beach profile. Profile elevation at the slope break in western FWB can vary 0.5 m in the course of weeks. Changes in surface sediment that range from sand to cobble are co-incident with these changes in elevation. High sediment mobility and profile variation are inconsistent with shoreline stability and decreased sediment from the presumed source on the Elwha River delta.

The Ledgewood-Bonair Landslide toe and where did it go? A case study in littoral sediment budgets from a deep-seated landslide in Island County, Washington

On the morning of March 27th, 2013, a small portion of a much larger landslide complex failed on the western shoreline of central Whidbey Island, Island County, Washington. This landslide, known as the Ledgewood-Bonair Landslide (LB Landslide), mobilized as much as 150,000 cubic meters of unconsolidated glacial sediment onto the coastline of the Puget Sound (Slaughter et al., 2013, Geotechnical Engineering Services, 2013). This study aims to determine how sediment from the Ledgewood-Bonair Landslide has acted on the adjacent beaches 400 meters to the north and south, and specifically to evaluate the volume of sediment contributed by the slide to adjacent beaches, how persistent bluff-derived accretion has been on adjacent beaches, and how intertidal grain sizes changed as a result of the bluff-derived sediment, LiDAR imagery from 2013 and 2014 were differenced and compared to beach profile data and grain size photography. Volume change results indicate that of the 41,850 cubic meters of sediment eroded at the toe of the landslide, 8.9 percent was redeposited on adjacent beaches within 1 year of the landslide. Of this 8.9 percent, 6.3 percent ended up on the north beach and 2.6 percent ended up on the south beach. Because the landslide deposit was primarily sands, silts, and clays, it is reasonable to assume that the remaining 91.1 percent of the sediment eroded from the landslide toe was carried out into the waters of the Puget Sound. Over the course of the two-year study, measurable accretion is apparent up to 150 meters north and 100 meters south of the landslide complex. Profile data also suggests that the most significant elevation changes occurred within the first two and half months since the landslides occurrence. The dominant surficial grain size of the beach soon after the landslide was coarse-sand; in the years following the landslide, 150 meters north of the toe the beach sediment became finer while 100 meters south of the toe the beach sediment became coarser. Overall, the LB Landslide has affected beach profile and grain size only locally, within 150 meters of the landslide toe.