Numerical modelling of laboratory tests for TBM cutter indentation process analysis

Considering that TBMs are nowadays used for long Trans-Alpine tunnels, the
understanding of rock breaking and chipping due to TBM cutter disks mechanism, for deep tunnelling operations, becomes very interesting. In this paper, the results from carried out laboratory tests that simulate the disk cutter action at the rock tunnel face by means of an indentation tool, acting on a rock
specimen with proper size, and the related three-dimensional and two-dimensional numerical modelling are proposed. The developed numerical models simulate the different test conditions (applied load, boundary conditions) allowing the analysis of the stresses distributions along possible breaking planes.
The influence of a confinement-free area on one side of the specimen, simulating the formation of a groove near the tool, is pointed out.
The obtained results from numerical modelling put in evidence a satisfactory agreement with the experimental observations.

Effects of motive-oriented therapeutic relationship in a ten-session general psychiatric treatment of borderline personality disorder: a randomized controlled trial.

Background: Motive-oriented therapeutic relationship (MOTR) was postulated to be a particularly helpful therapeutic ingredient in the early treatment phase of patients with personality disorders, in particular with borderline personality disorder (BPD). The present randomized controlled study using an add-on design is the first study to test this assumption in a 10-session general psychiatric treatment with patients presenting with BPD on symptom reduction and therapeutic alliance. Methods: A total of 85 patients were randomized. They were either allocated to a manual-based short variant of the general psychiatric management (GPM) treatment (in 10 sessions) or to the same treatment where MOTR was deliberately added to the treatment. Treatment attrition and integrity analyses yielded satisfactory results. Results: The results of the intent-to-treat analyses suggested a global efficacy of MOTR, in the sense of an additional reduction of general problems, i.e. symptoms, interpersonal and social problems (F1, 73 = 7.25, p < 0.05). However, they also showed that MOTR did not yield an additional reduction of specific borderline symptoms. It was also shown that a stronger therapeutic alliance, as assessed by the therapist, developed in MOTR treatments compared to GPM (Z55 = 0.99, p < 0.04). Conclusions: These results suggest that adding MOTR to psychiatric and psychotherapeutic treatments of BPD is promising. Moreover, the findings shed additional light on the perspective of shortening treatments for patients presenting with BPD. © 2014 S. Karger AG, Basel.

Les expériences sociales et universitaires d’étudiants internationaux au Québec, le cas de l’Université de Montréal : comprendre leur persévérance aux études

Notre recherche a pour objet la persévérance aux études supérieures d’étudiants internationaux à l’Université de Montréal (UdeM) inscrits en programme de recherche (maîtrise et doctorat). L’objectif général de cette étude est d’explorer leurs conditions de vie et d’études afin de tendre vers une compréhension approfondie leur persévérance à l’UdeM. Constatant l’augmentation des migrations étudiantes, nous avons choisi de nous intéresser aux expériences sociales et universitaires d’étudiants internationaux. Des étudiants en mobilité internationale arrivent dans un pays et une université qu’ils ne connaissent pas ou peu et dans une nouvelle ville et une nouvelle culture qui leur sont souvent étrangères. Toutefois, nous ignorons beaucoup des conditions de vie et d’études des étudiants internationaux aux cycles supérieurs alors qu’ils jouent un rôle clé au chapitre des performances économique et scientifique des pays et institutions qui les accueillent. Dès lors, nous voulons comprendre comment des étudiants internationaux inscrits en programmes de recherche (maîtrise et doctorat) persévèrent à l’Université de Montréal. Cette thèse expose donc les points relatifs aux conditions d’accueil, d’intégration et de formation d’étudiants internationaux inscrits en programme de recherche à l’Université de Montréal. Nous partons des contextes canadiens et québécois de l’internationalisation de l’enseignement supérieur pour analyser la trame de l’expérience desdits étudiants, depuis les conditions scolaires, sociales et personnelles de leurs milieux d’accueil. Ainsi, la thèse nous plonge dans l’univers de ces étudiants et présente de nombreux points d’intérêt et une contribution à la sociologie de l’enseignement supérieur. Nous avons analysé les aspects relatifs aux caractéristiques des étudiants susceptibles de favoriser ou compromettre leur persévérance (Tinto, 1993) et les expériences scolaires et sociales de ces étudiants et le sens qu’ils donnent à ces expériences (Dubet, 1994; Rochex, 1995) et, enfin, nous avons exploré les trois temps de l’affiliation (Coulon, 1997). La question de recherche est la suivante : quels sont les aspects associés aux caractéristiques des étudiants (Tinto), à leurs expériences sociales (Dubet) et à l’apprentissage du métier d’étudiant (Coulon) susceptibles d’influencer la persévérance aux études chez les étudiants internationaux ? En ce qui concerne la méthodologie, cette recherche est de type exploratoire et repose sur une démarche d’investigation qualitative. Notre étude s’est attachée à décrire le cheminement scolaire des étudiants internationaux, nous avons tenté de tirer du sens de données institutionnelles mises à disposition. Des entretiens auprès de huit étudiants internationaux ont été réalisés. Nous proposons un survol des facteurs freinant ou favorisant la poursuite des études. Finalement, l’analyse compréhensive des entretiens suggère une forte capacité de résilience et l’importance d’une solidarité entre étudiants internationaux, en dépit de l’absence de bourses d’études ou d’autres soutiens financiers. Concernant leur intégration sociale et académique, si le Canada est décrit comme une société accueillante, les étudiants internationaux ont encore à surmonter des barrières culturelles et linguistiques, ils souffrent également d’un manque d’amitiés interculturelles faisant en sorte qu’ils ressentent un malaise général. Les échos de leurs récits suggèrent également l’importance des interactions de qualité avec leurs directions de recherche. Les étudiants internationaux ont besoin du soutien intellectuel, moral et financier de leur direction de recherche. Ces dernières sont souvent et systématiquement décrites comme première, voire unique, source d’informations. Elles sont aussi reconnues comme favorisant la persévérance aux études. Dans un tout autre ordre de déterminant, les étudiants internationaux mentionnent également que leur bien-être (physique et psychologique) dépend également de leur alimentation et la pratique de leur religion. Par exemple, certains sont véritablement en lutte pour accepter une alimentation totalement différente de celle de chez eux. De toute évidence, l’alimentation, la langue et la religion sont décrites comme véhicule de maintien de leur identité culturelle, au Canada et ce maintien est important pour leur bien-être et leur confort général dans le pays d’accueil. La recherche a permis de rendre plus audible la vie universitaire et sociale de ces étudiants jusque-là méconnue au Québec et à Montréal. L’approche exploratoire et compréhensive a montré que les migrations pour études répondent avant tout à des choix individuels liés à des aspirations sociales et professionnelles élevées. Mais, la décision de persévérer dépend de l’interrelation entre les stratégies individuelles et les contraintes migratoires, économiques et sociales. La thèse contribue à une meilleure compréhension de l’expérience des étudiants internationaux, notamment en montrant comment leur persévérance s’accompagne d’une fragilité et ces connaissances sont importantes pour les universités qui cherchent à accroître leur place sur le marché international de l’enseignement supérieur.

Profits, malversations, restitutions. Les bénéfices des financiers durant la guerre de la Ligue d’Augsbourg et la taxe de Chamillart

Profit, embezzlement, restitution. The role of the traitants in the Nine Years War and Chamillart’s tax on financial benefits The aim of this article is to revisit the question of the financiers in Old Regime France. It starts with an analysis of the discourses about the financiers under the Absolute monarchy that underlines the complexity of their relationship with the government and the public. It then reviews the secondary literature and highlights the existence of competing historical interpretations (functional, political, utilitarian), which raise the question of their overall capacity to account for the role and impact of the financiers at different times. On this ground, the article focuses on a specific group of financiers, the so-called traitants d’affaires extraordinaires, during the Nine Years War. Further to a description of the specific role and scope of the activities of the various financiers responsible for helping the monarchy to raise the funds it needed to pay for its peace and wartime expenditure, the article examines the conditions and profits granted by the king in his contracts with the traitants whose services were hired for the purpose of selling royal offices in the public and advancing the revenue to the Treasury. It also explores the contractual arrangements of the companies established by the financiers to manage their operations as well as the rights and the responsibilities of their various stakeholders. These bases being laid, the article relies on the administrative correspondence relating to the traités during the Nine Years War to address a range of issues, in particular the extent to which these contracts, and other control procedures, were robust enough to deter fraud. The accounts of two traitants’ companies offer an opportunity to analyse and compare the structure of their income and expenditure (including the volume and cost of the promissory notes sold in the public to finance their payments to the Treasury), to explore the strategies of the contractors, to calculate their net profits and further discuss the problem of embezzlement. The article ends with the study of the context and debates which led to the introduction by finance minister Michel Chamillart, in 1700, of a shortfall tax on the financial profits of the gens d’affaires or traitants, the method used to determine its rate (50 % of the net benefits), its distribution among the various stakeholders (including the bailleurs de fonds or backers), and the related procedures. In total, the article argues that the relationship between the monarchy, society and the financiers under the Ancien Regime was not static and, therefore, suggests that the broad question of control and fraud must be examined against changing circumstances. With regard specifically to the Nine Years War, the article concludes that within the constraints of the Absolute monarchy, contractors offered valuable services by raising capital for the benefit of a king who ruled over a country which, at the time, was by far the wealthiest in Europe, and where ministers failed to foresee long wars of attrition and whose financial strategy was limited by the very existence of privilege. Overall, the traités were too costly to be a viable system of war financing. In these conditions, the substantial fortunes made by a handful of very successful traitants suffice to explain that the government easily gave in to public criticism against the wealth of the financiers and felt compelled, when peace resumed, to cancel the advantageous conditions offered in the treaties by taxing financial profits.

An investigation of worn work roll materials used in the finishing stands of the hot strip mill for steel rolling

The surface failure characteristics of different work roll materials, i.e. High Speed Steel, High Chromium Iron and Indefinite Chill Iron, used in the finishing stands of a hot strip mill have been investigated using stereo microscopy, 3D optical profilometry, scanning electron microscopy and energy dispersive X-ray spectroscopy. The results show that the surface failure mechanisms of work rolls for hot rolling are very complex, involving plastic deformation, abrasive wear, adhesive wear, mechanical and thermal induced cracking, material transfer and oxidation. Despite the differences in chemical composition and microstructure, the tribological response of the different work roll materials was found to be strongly dependent on the material microstructure and especially the presence and distribution of microstructural constituents, such as the different carbide phases and graphite (in the case of Indefinite Chill Iron). Cracking and chipping of the work roll surfaces, both having a negative impact on work roll wear, are strongly influenced by the presence of carbides, carbide networks and graphite in the work roll surface. Consequently, the amount of carbide forming elements as well as the manufacturing process must be controlled in order to obtain an optimised microstructure and a predictable wear rate.

Desgaste de ferramentas no torneamento com alta velocidade de corte da superliga waspaloy

Nesse trabalho, procurou-se estudar os mecanismos de desgaste de diversas geometrias de ferramentas cerâmicas (Al2O3 + SiCw e Al2O3 + TiC) e ferramentas de PCBN. Para isto foram realizados ensaios de torneamento com alta velocidade de corte em uma superliga à base de níquel (Waspaloy) com dureza de aproximadamente 40 HRC sob condição de corte a seco. As superligas são conhecidas como materiais de difícil usinabilidade devido à alta dureza, alta resistência mecânica em alta temperatura, afinidade para reagir com materiais da ferramenta e baixa condutividade térmica. Os resultados mostraram que o material da ferramenta e a geometria influenciaram o comportamento dos mecanismos de desgaste. de uma maneira geral, o tipo de desgaste dominante foi o de entalhe e os mecanismos foram abrasão, attrition (aderência com arrastamento) e provável difusão na maioria das ferramentas utilizadas.

Transmission problem for waves with frictional damping April 22, 2007

In this paper we consider the transmission problem, in one space dimension, for linear dissipative waves with frictional damping. We study the wave propagation in a medium with a component with attrition and another simply elastic. We show that for this type of material, the dissipation produced by the frictional part is strong enough to produce exponential decay of the solution, no matter how small is its size. ©2007 Texas State University.

Torneamento de liga de níquel Pyromet 31V (N07032) com ferramentas de metal duro

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Recuperação de resíduos plásticos provenientes dos processos de injeção

The competitiveness among global markets, the constant need for reducing manufacturing costs and also the growing environmental commitments are fueling the development of techniques for recovery residual parts generated by industrial processes. Among the various areas of a company, we highlight those that involve the processing of raw materials derived from oil, such as polymers (resins), which may take centuries to decompose in the environment and also present as a economic and environmentally strategic point. Thus, this study would examine the recovery of waste polypropylene, from the injection process of a major multinational in the field of home appliances through the recycling by a process comprising the milling, extrusion and chipping of waste material. Easy to deploy, this proposal aims to reduce levels negligible disposal (scrap) of these residues as well as the reintegration of the production process into pieces no visual and no structural importance, aimed at cutting costs and reducing environmental impacts caused. After the survey data in kilograms of waste material generated in a given period of time, and the study of changes in material properties, it would enable the reuse steadily in the injection process

Análise do comportamento do desgaste de dressadores de ponta única confeccionados com diamantes naturais e sintético piramidais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Confiabilidade de coroas com infraestrutura em zircônia sob fadiga deslizante: efeito do tipo de tratamento interno para cimentação

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Probabilidade de falha de coroas com infraestrutura em zircônia com diferentes geometrias

Pós-graduação em Odontologia Restauradora - ICT

Degradabilidade e digestibilidade de híbridos de milho em função do estádio de colheita, tamanho de partícula e processamento por meio do esmagamento na ensilagem

During the process of silage corn, should take into consideration some aspects that will result in better utilization. The aim of this study was to evaluate the degradability of dry matter (DM), crude protein (CP), neutral detergent fiber (NDF) and starch digestibility and in vitro dry matter (DM) of silage corn hybrids due two textures, three stages of harvest, three particle sizes and processing by crushing. After harvesting and chipping, part of the material was crushed and then ensiled and sealed for 45 days. After opening the silos, analyzed the degradability in the incubation time of 20 hours using the technique in situ macro bag. The experimental design was a randomized split plot. The DM degradability was influenced only by the effect of stages of sampling used. The degradability of CP showed interaction between processing and particle size (Tp), noting that increased degradation due to processing. For NDF degradation significant interaction of factors, hybrid and processing, similar to the degradation of starch. The IVDMD was influenced by the effects of hybrid, stadium, Tp and processing. It can be concluded that benefits were higher with the use of processing associated with more advanced stages of harvest, in larger particle sizes.

Human telomere disease due to disruption of the CCAAT box of the TERC promoter

Mutations in the coding region of telomerase complex genes can result in accelerated telomere attrition and human disease. Manifestations of telomere disease include the bone marrow failure syndromes dyskeratosis congenita and aplastic anemia, acute myeloid leukemia, liver cirrhosis, and pulmonary fibrosis. Here, we describe a mutation in the CCAAT box (GCAAT) of the TERC gene promoter in a family in which multiple members had typical features of telomeropathy. The genetic alteration in this critical regulatory sequence resulted in reduced reporter gene activity and absent binding of transcription factor NF-Y, likely responsible for reduced TERC levels, decreased telomerase activity, and short telomeres. This is the first description of a pathogenic mutation in the highly con-served CCAAT box and the first instance of a mutation in the promoter region of TERC producing a telomeropathy. We propose that current mutation-screening strategies should include gene promoter regions for the diagnosis of telomere diseases. This clinical trial was registered at www.clinicaltrials.gov as #NCT00071045. (Blood. 2012;119(13):3060-3063)

Longitudinal data on telomere length in leukocytes from newborn baboons support a marked drop in stem cell turnover around 1 year of age

Stem cells of various tissues are typically defined as multipotent cells with 'self-renewal' properties. Despite the increasing interest in stem cells, surprisingly little is known about the number of times stem cells can or do divide over a lifetime. Based on telomere-length measurements of hematopoietic cells, we previously proposed that the self-renewal capacity of hematopoietic stem cells is limited by progressive telomere attrition and that such cells divide very rapidly during the first year of life. Recent studies of patients with aplastic anemia resulting from inherited mutations in telomerase genes support the notion that the replicative potential of hematopoietic stem cells is directly related to telomere length, which is indirectly related to telomerase levels. To revisit conclusions about stem cell turnover based on cross-sectional studies of telomere length, we performed a longitudinal study of telomere length in leukocytes from newborn baboons. All four individual animals studied showed a rapid decline in telomere length (approximately 2-3 kb) in granulocytes and lymphocytes in the first year after birth. After 50-70 weeks the telomere length appeared to stabilize in all cell types. These observations suggest that hematopoietic stem cells, after an initial phase of rapid expansion, switch at around 1 year of age to a different functional mode characterized by a markedly decreased turnover rate.