Coquinas eoaptianas do sudoeste da Bacia de Campos: fácies deposicionais, eventos diagenéticos e fatores controladores da qualdade do reservatório

Pós-graduação em Geologia Regional - IGCE

Geoquímica de perfis lateríticos na chapada sedimentar do Triângulo Mineiro

The ferruginous sandstone (Serra da Galga member) from Marilia formation present in sedimentary mining triangle plateaus - MG (southeast Brazil) is still not properly characterized, as well as the presence of a rich layer Fe nodules which is not properly understood, as are the alteration products of this material that may be linked to the presence of refractory clays which are characterized by intimate relationship between Fe and Al. Aluminum is widely present on top of these plateaus. This course conclusion paper characterized the mineralogy and distribution of smaller elements both rust sandstone evolved as soil above this sandstone. The characterization has been done by using X-ray fluorescence techniques (XRF), the iron was removed by using the CBD method (dithionito-citratebicarbonate), and X-ray diffraction (XRD) and analysis of the products extracted by the CBD method by ICP- OES were made to characterize the material. The results of the XRF show great variation of Al and Si, Fe with almost constant behavior in the average depth of 110 cm, where it has the highest concentration levels. Fe appear associated with the V and Ce. CDB results show a clear relation of Fe with Al. Al does not have in this case compared with Cr or any other item. The concentration of extracted Al was always below the concentration of Fe. In the region, the formation of this Latosols- Gleysols system is subject to topography and its influence on local water regime, a regime that has direct influence on the formation of supergene accumulations as in the area and results in aluminum accumulation in refractory clays exploited by IBAR mining

Saúde Mental e Morte: subsídios para implantação dos Cuidados Paliativos na Atenção Básica

The objective of this work was, from a bibliographical survey, to discuss the relationship between the subjects “Mental Health” and “Death”, in order to analyze possible contributions of the Psychiatric Reformation tied with the sphere of Palliative Cares. The characterization of madness as a social problem is related to the development of the capitalist mode of production. Unable to fulfill the requirements imposed by capital, insane persons are excluded from society and locked in psychiatric hospitals in order to be treated. In the same way, death is incompatible with the capitalist principles of accumulation of goods. Dying people are then transferred to the hospital in order to hide their invalidity, non-production and felt inexistence of wealth. Some principles for care in mental health that could be shared in the palliative cares are: deinstitutionalization; organization of assistance in a network; psychosocial assistance; interdisciplinarity and construction of the autonomy of family members and users. In this sense, some challenges are distinguished, between them, professional training.

Sistemas petrolíferos especulativos da bacia de Pelotas (offshore do Uruguai)

Pós-graduação em Geociências e Meio Ambiente - IGCE

Estratigrafia do Andar Alagoas na sub-bacia do Tucano Norte, Bahia

Pós-graduação em Geociências e Meio Ambiente - IGCE

Estratigrafia do Andar Alagoas na sub-bacia do Tucano Norte, Bahia

Pós-graduação em Geociências e Meio Ambiente - IGCE

Caracterização geoelétrica de arenitos asfálticos da Formação Pirambóia, Bacia do Paraná

Os combustíveis fósseis respondem por cerca de 90% da matriz energética global, e apesar de ser consenso a necessidade de expansão da mesma e da redução do consumo de bens e energia em nossa cultura, esta mudança caminha a passos muito lentos, e a pesquisa relacionada aos recursos de combustíveis fósseis, inclusive o desenvolvimento de tecnologias que nos permitam explorar economicamente reservas antes inviáveis, ainda é extremamente necessária. As reservas mundiais de petróleo mais acessíveis ou economicamente viáveis, devido à sua extensão ou qualidade do óleo, têm sua vida útil contada e acumulações não convencionais tem sido exploradas. Os arenitos asfálticos da Formação Pirambóia, na borda leste da Bacia do Paraná, foram a acumulação de hidrocarbonetos escolhida para experimentar novos meios de investigação a serem usados na indústria de petróleo, aproveitando-se de métodos geofísicos com aplicações usuais em outras áreas da ciência, como geologia ambiental e geotecnia, testando sua potencialidade na identificação de áreas com presença de hidrocarbonetos. O objetivo do trabalho foi identificar um comportamento elétrico em uma camada de arenito impregnado por betume distinguível do comportamento elétrico das camadas de arenito adjacentes, que não contém betume, estabelecendo assim uma assinatura geofísica associável à presença de hidrocarbonetos. Os métodos utilizados (Eletrorresistividade, Polarização Induzida e Eletromagnético Indutivo) mostraram o comportamento dos arenitos asfálticos em função de seus parâmetros físicos elétricos (resistividade, condutividade e cargabilidade) e possibilitaram a identificação e o mapeamento da camada asfáltica, em meio à camadas não impregnadas por betume, conforme pretendido. A boa correlação entre os perfis gerados após o processamento dos dados obtidos em campo e a geometria da camada observada em afloramento indica que os métodos geoelétricos podem constituir uma ferramenta de análise na pesquisa de hidrocarbonetos em bacias sedimentares continentais, possibilitando um diagnóstico inicial da presença de hidrocarbonetos em áreas pré definidas, com métodos não destrutivos, não poluentes e, comparativamente aos métodos convencionais utilizados na indústria de petróleo e gás, mais baratos e rápidos.

Hora de fazer as contas

Dos R$ 144,4 bilhões previstos na Lei Orçamentária Anual (LOA) 2016 para uso discricionário, ou seja, sem comprometimento com rubricas específicas, aproximadamente R$ 49,4 bilhões (34,2%) já foram empenhados pelo governo da presidente Dilma Rousseff (PT) – afastada na última quinta-feira pelos senadores para que seja julgada por crime de responsabilidade. Desse total, 15,2% já foram liquidados e 14,1% pagos. Por isso, Temer tem a autorização da LOA 2016 para investir o valor de R$ 95 bilhões em verbas discricionárias. A conta é do pesquisador da Diretoria de Análise de Políticas Públicas da Fundação Getúlio Vargas (DAPP/FGV), Wagner Oliveira, com base em dados do Siga Brasil, do Senado Federal.

Estudo de simulação de reservatórios para o desenvolvimento de um campo do nordeste brasileiro

In the last 16 years emerged in Brazil a segment of independent producers with focus on onshore basins and shallow waters. Among the challenges of these companies is the development of fields with projects with a low net present value (NPV). The objective of this work was to study the technical-economical best option to develop an oil field in the Brazilian Northeast using reservoir simulation. Real geology, reservoir and production data was used to build the geological and simulation model. Due to not having PVT analysis, distillation method test data known as the true boiling points (TBP) were used to create a fluids model generating the PVT data. After execution of the history match, four development scenarios were simulated: the extrapolation of production without new investments, the conversion of a producing well for immiscible gas injection, the drilling of a vertical well and the drilling of a horizontal well. As a result, from the financial point of view, the gas injection is the alternative with lower added value, but it may be viable if there are environmental or regulatory restrictions to flaring or venting the produced gas into the atmosphere from this field or neighboring accumulations. The recovery factor achieved with the drilling of vertical and horizontal wells is similar, but the horizontal well is a project of production acceleration; therefore, the present incremental cumulative production with a minimum rate of company's attractiveness is higher. Depending on the crude oil Brent price and the drilling cost, this option can be technically and financially viable.

Estudo da influência de sistemas microemulsionados na molhabilidade de arenitos e na recuperação avançada de petróleo

Sandstone-type reservoir rocks are commonly responsible for oil accumulation. The wettability is an important parameter for the physical properties of the container, since it interferes in characteristics such as relative permeability to the aqueous phase, residual oil distribution in the reservoir, operating characteristics with waterflood and recovery of crude oil. This study applied different types of microemulsion systems - MES - in sandstone reservoirs and evaluated their influences on wettability and residual oil recovery. For this purpose, four microemulsion were prepared by changing the nature of ionic surfactants (ionic and nonionic). Microemulsions could then be characterized by surface tension analysis, density, particle diameter and viscosity in the temperature range 30° C to 70° C. The studied oil was described as light and the sandstone rock was derived from the Botucatu formation. The study of the influence of microemulsion systems on sandstone wettability was performed by contact angle measurements using as parameters the rock treatment time with the MES and the time after the brine surface contact by checking the angle variation behavior. In the study results, the rock was initially wettable to oil and had its wettability changed to mixed wettability after treatment with MES, obtaining preference for water. Regarding rock-MES contact time, it was observed that the rock wettability changed more when the contact time between the surface and the microemulsion systems was longer. It was also noted only a significant reduction for the first 5 minutes of interaction between the treated surface and brine. The synthesized anionic surfactant, commercial cationic, commercial anionic and commercial nonionic microemulsion systems presented the best results, respectively. With regard to enhanced oil recovery performance, all systems showed a significant percentage of recovered oil, with the anionic systems presenting the best results. A percentage of 80% recovery was reached, confirming the wettability study results, which pointed the influence of this property on the interaction of fluids and reservoir rock, and the ability of microemulsion systems to perform enhanced oil recovery in sandstone reservoirs.

Estudo da influência de sistemas microemulsionados na molhabilidade de arenitos e na recuperação avançada de petróleo

Sandstone-type reservoir rocks are commonly responsible for oil accumulation. The wettability is an important parameter for the physical properties of the container, since it interferes in characteristics such as relative permeability to the aqueous phase, residual oil distribution in the reservoir, operating characteristics with waterflood and recovery of crude oil. This study applied different types of microemulsion systems - MES - in sandstone reservoirs and evaluated their influences on wettability and residual oil recovery. For this purpose, four microemulsion were prepared by changing the nature of ionic surfactants (ionic and nonionic). Microemulsions could then be characterized by surface tension analysis, density, particle diameter and viscosity in the temperature range 30° C to 70° C. The studied oil was described as light and the sandstone rock was derived from the Botucatu formation. The study of the influence of microemulsion systems on sandstone wettability was performed by contact angle measurements using as parameters the rock treatment time with the MES and the time after the brine surface contact by checking the angle variation behavior. In the study results, the rock was initially wettable to oil and had its wettability changed to mixed wettability after treatment with MES, obtaining preference for water. Regarding rock-MES contact time, it was observed that the rock wettability changed more when the contact time between the surface and the microemulsion systems was longer. It was also noted only a significant reduction for the first 5 minutes of interaction between the treated surface and brine. The synthesized anionic surfactant, commercial cationic, commercial anionic and commercial nonionic microemulsion systems presented the best results, respectively. With regard to enhanced oil recovery performance, all systems showed a significant percentage of recovered oil, with the anionic systems presenting the best results. A percentage of 80% recovery was reached, confirming the wettability study results, which pointed the influence of this property on the interaction of fluids and reservoir rock, and the ability of microemulsion systems to perform enhanced oil recovery in sandstone reservoirs.

Estudo da injeção de água e gás em um reservatório com características do pré-sal brasileiro

The pre-salt province is composed by large amounts of light oil and with good quality, a reality that puts Brazil in a strategic position facing the great demand for energy worldwide. In this province are the largest discoveries in the world in the last ten years; areas as Libra, Franco and Lula field, everyone containing volumes greater than 8 billion recoverable oil barrels. To develop and optimize the production of these fields, a study was done for choosing the improved oil recovery methods. The main motivations were the presence of carbon dioxide (CO2) as a contaminant and the strategic decision of do not discard it, combined with high GOR (gas-oil ratio) of the reservoir fluid. The method should take advantage of the unique abundant resources: seawater and produced gas. This way, the process of matching these resources in the water alterning gas injection (WAG) became a good option. In this master’s dissertation, it was developed a reservoir model with average characteristics of the Brazilian pre-salt, where was applied the improved oil recovery method of water alternating gas. The production of this reservoir was analyzed by parameters as: the first fluid injected in the injection process, position of the injection wells completion, injection water and gas rate and cycle time. The results showed a good performance of the method, with up to 26% of gains in the recovery factor regarding the primary recovery, since the application of water injection and gas, individually, was not able to overcome 10 % of gain. The most influential parameter found in the results was the cycle time, with higher recovery factor values obtained with the use of shorter times.