Three-year results of visual outcome with disease activity-guided ranibizumab algorithm for the treatment of exudative age-related macular degeneration

PURPOSE To evaluate 3-year follow-up treatment outcomes with ranibizumab (Lucentis(®)) 0.5 mg administered either monthly or quarterly on a pro re nata (PRN) basis according to a disease activity-guided monitoring and treatment algorithm. METHODS A total of 316 treatment-naive eyes of 316 patients with exudative age-related macular degeneration met the criteria for inclusion in this retrospective, interventional case series. Patients were treated with ranibizumab 0.5 mg according to a disease activity-guided algorithm with monthly monitoring. Optical coherence tomography and fluorescein angiography were routinely used to assess disease activity: active lesions were treated with a series of three monthly injections, whereas inactive lesions were treated with quarterly injections. RESULTS Mean Early Treatment Diabetic Retinopathy Study best-corrected visual acuity improved from 52 letters at baseline to 59 letters at 12 months, achieved with a mean of 7.1 injections, 61 letters at 24 months with a mean of 5.0 injections administered in the second year and 60 letters at 36 months with a mean number of 5.2 injections. CONCLUSIONS Monthly visits and a morphology-driven PRN regimen with 3 injections in case of recurrence plus quarterly injections in case of inactive CNV resulted in an average VA gain of 7-9 letters that could be maintained over 3 years.

VISUAL-INERTIAL INTEGRATION FOR HUMAN MOTION TRACKING AND NAVIGATION IN FREE-LIVING ENVIRONMENTS

The aging population has become a burning issue for all modern societies around the world recently. There are two important issues existing now to be solved. One is how to continuously monitor the movements of those people having suffered a stroke in natural living environment for providing more valuable feedback to guide clinical interventions. The other one is how to guide those old people effectively when they are at home or inside other buildings and to make their life easier and convenient. Therefore, human motion tracking and navigation have been active research fields with the increasing number of elderly people. However, motion capture has been extremely challenging to go beyond laboratory environments and obtain accurate measurements of human physical activity especially in free-living environments, and navigation in free-living environments also poses some problems such as the denied GPS signal and the moving objects commonly presented in free-living environments. This thesis seeks to develop new technologies to enable accurate motion tracking and positioning in free-living environments. This thesis comprises three specific goals using our developed IMU board and the camera from the imaging source company: (1) to develop a robust and real-time orientation algorithm using only the measurements from IMU; (2) to develop a robust distance estimation in static free-living environments to estimate people’s position and navigate people in static free-living environments and simultaneously the scale ambiguity problem, usually appearing in the monocular camera tracking, is solved by integrating the data from the visual and inertial sensors; (3) in case of moving objects viewed by the camera existing in free-living environments, to firstly design a robust scene segmentation algorithm and then respectively estimate the motion of the vIMU system and moving objects. To achieve real-time orientation tracking, an Adaptive-Gain Orientation Filter (AGOF) is proposed in this thesis based on the basic theory of deterministic approach and frequency-based approach using only measurements from the newly developed MARG (Magnet, Angular Rate, and Gravity) sensors. To further obtain robust positioning, an adaptive frame-rate vision-aided IMU system is proposed to develop and implement fast vIMU ego-motion estimation algorithms, where the orientation is estimated in real time from MARG sensors in the first step and then used to estimate the position based on the data from visual and inertial sensors. In case of the moving objects viewed by the camera existing in free-living environments, a robust scene segmentation algorithm is firstly proposed to obtain position estimation and simultaneously the 3D motion of moving objects. Finally, corresponding simulations and experiments have been carried out.

Passive wireless sensor systems can recognize activites of daily living

The ability to determine what activity of daily living a person performs is of interest in many application domains. It is possible to determine the physical and cognitive capabilities of the elderly by inferring what activities they perform in their houses. Our primary aim was to establish a proof of concept that a wireless sensor system can monitor and record physical activity and these data can be modeled to predict activities of daily living. The secondary aim was to determine the optimal placement of the sensor boxes for detecting activities in a room. A wireless sensor system was set up in a laboratory kitchen. The ten healthy participants were requested to make tea following a defined sequence of tasks. Data were collected from the eight wireless sensor boxes placed in specific places in the test kitchen and analyzed to detect the sequences of tasks performed by the participants. These sequence of tasks were trained and tested using the Markov Model. Data analysis focused on the reliability of the system and the integrity of the collected data. The sequence of tasks were successfully recognized for all subjects and the averaged data pattern of tasks sequences between the subjects had a high correlation. Analysis of the data collected indicates that sensors placed in different locations are capable of recognizing activities, with the movement detection sensor contributing the most to detection of tasks. The central top of the room with no obstruction of view was considered to be the best location to record data for activity detection. Wireless sensor systems show much promise as easily deployable to monitor and recognize activities of daily living.

Closed-Loop Deep Brain Stimulation: Bidirectional Neuroprosthetics for Tremor and BCI

Thesis (Ph.D.)--University of Washington, 2016-06

Determinação de CD, PB, e TL em água produzida por HR-CS GF AAS após extração em ponto nuvem

Produced water is a major problem associated with the crude oil extraction activity. The monitoring of the levels of metals in the waste is constant and requires the use of sensitive analytical techniques. However, the determination of trace elements can often require a pre-concentration step. The objective of this study was to develop a simple and rapid analytical method for the extraction and pre-concentration based on extraction phenomenon cloud point for the determination of Cd, Pb and Tl in produced water samples by spectrometry of high resolution Absorption source continues and atomization graphite furnace. The Box Behnken design was used to obtain the optimal condition of extraction of analytes. The factors were evaluated: concentration of complexing agent (o,o-dietilditilfosfato ammonium, DDTP), the concentration of hydrochloric acid and concentration of surfactant (Triton X -114). The optimal condition obtained through extraction was: 0,6% m v-1 DDTP, HCl 0,3 mol L-1 and 0,2% m v-1 of Triton X - 114 for Pb; 0,7% m v-1 DDTP, HCl 0,8 mol L-1 and 0,2% m v-1 Triton X-114 for Cd. For Tl was evidenced that best extraction condition occurs with no DDTP, the extraction conditions were HCl 1,0 mol L-1 e 1,0% m v-1 de Triton X - 114. The limits of detection for the proposed method were 0,005 µg L-1 , 0,03 µg L-1 and 0,09 µg L-1 to Cd, Pb and Tl, Respectively. Enrichment factors Were greater than 10 times. The method was applied to the water produced in the Potiguar basin, and addition and recovery tests were performed, and values were between 81% and 120%. The precision was expressed with relative standard deviation (RSD) is less than 5%

IMPROVED SENSITIVITY OF RESONANT MASS SENSOR BASED ON MICRO TILTING PLATE AND MICRO CANTILEVER

Vapor sensors have been used for many years. Their applications range from detection of toxic gases and dangerous chemicals in industrial environments, the monitoring of landmines and other explosives, to the monitoring of atmospheric conditions. Microelectrical mechanical systems (MEMS) fabrication technologies provide a way to fabricate sensitive devices. One type of MEMS vapor sensors is based on mass changing detection and the sensors have a functional chemical coating for absorbing the chemical vapor of interest. The principle of the resonant mass sensor is that the resonant frequency will experience a large change due to a small mass of gas vapor change. This thesis is trying to build analytical micro-cantilever and micro-tilting plate models, which can make optimization more efficient. Several objectives need to be accomplished: (1) Build an analytical model of MEMS resonant mass sensor based on micro-tilting plate with the effects of air damping. (2) Perform design optimization of micro-tilting plate with a hole in the center. (3) Build an analytical model of MEMS resonant mass sensor based on micro-cantilever with the effects of air damping. (4) Perform design optimization of micro-cantilever by COMSOL. Analytical models of micro-tilting plate with a hole in the center are compared with a COMSOL simulation model and show good agreement. The analytical models have been used to do design optimization that maximizes sensitivity. The micro-cantilever analytical model does not show good agreement with a COMSOL simulation model. To further investigate, the air damping pressures at several points on the micro-cantilever have been compared between analytical model and COMSOL model. The analytical model is inadequate for two reasons. First, the model’s boundary condition assumption is not realistic. Second, the deflection shape of the cantilever changes with the hole size, and the model does not account for this. Design optimization of micro-cantilever is done by COMSOL.

Estado nutricional y etapas de cambio comportamental frente a la actividad física niños y adolescentes de Bogotá, Colombia: Estudio FUPRECOL

Objetivo: El propósito del estudio fue relacionar la etapa en el cambio en el comportamiento frente a la actividad física y el estado nutricional en escolares entre 9 y 17 años de Bogotá- Colombia, pertenecientes al estudio FUPRECOL. Método: Se trata de un estudio transversal, en 6.606 niños y adolescentes entre 9 y 17 años, pertenecientes a 24 instituciones educativas, de Bogotá-Colombia. Se aplicó de manera auto-diligenciada el cuestionario de cambio de comportamiento en función a la intensión de realizar actividad física (CCC-Fuprecol) y se midió el peso y la estatura para determinar el estado nutricional con el índice de masa corporal (IMC). Resultados: El porcentaje de respuesta fue 94% y se consideraron válidos 6,606 registros, siendo 58.3 % (n=3.850) niñas con un promedio de edad de 12,7±2,3 años. En la población general, el 5,3 % de los escolares se encontraban en etapa de pre-contemplación, 31,8 % en contemplación, el 26,7 % en acción y el 36,2 % en etapa de mantenimiento. Al comparar la etapa de cambio con el estado nutricional por IMC, los escolares clasificados en obesidad mostraron mayor frecuencia de respuesta en la etapa de pre-contemplación, mientras que los escolares con peso saludable acusaron mayores porcentajes en la etapa de mantenimiento. Conclusión: En escolares de Bogotá, Colombia, se encontró una relación estadísticamente significativa entre a la intensión de realizar actividad con el estado nutricional medido con el IMC. Fomentar la promoción de la actividad física y monitorear el estado nutricional, deberá ser una prioridad en las agendas y políticas públicas dentro del ámbito escolar.

Otimização da Amostragem e Estudo de Viabilidade da Monitorização de Sondas na ETAR de Rabada

Mestrado em Engenharia Química - Tecnologias de Protecção Ambiental

How to increase and attract more tourists into Kenya throught experiental marketing

This marketing plan project is a culmination of extensive strategies with the use of experiential marketing to address issues confronting the Kenyan tourism industry in order to have a sustainable tourism sector. Following the terrorist attack carried out by Islamist militants’ belonging to al-Shabaab terrorist organization on Nairobi’s Westgate shopping mall in September 2013, tourist forecast has gone down sharply with an average of 20% fall in tourists’ arrivals which is likely to have an impact on the tourism sector in Kenya. Even before the deadly attack on Westgate, the most lethal attack by Islamist terrorists in 15 years in Kenya, the government through the Kenya tourist board had announced that in 2013 tourist arrivals were down by 12%, at 495,978, according to an October 2013 report by Bloomberg. Tourism revenues were also down by 7.4%, over FY12/13 (July-June) to reach KES96.24bn, according to a September 2013 report on the local Capital FM website. Beyond 2013, much will depend on how quickly the Kenya tourist board can regain control of the situation. The Kenyan government believes that the Westgate mall attack was a 'one-off' incident, with a low probability of a similar event happening again over the short term period. Germany, United States, United Kingdom, Australia, Italy, France and Canada continue to be the key source market however; the Kenya tourist board can make continued growth stronger from new emerging markets in order to increase new arrivals into the country. The marketing plan outlines the objectives to be implemented and provides the implementation strategy, activity plans, monitoring and evaluation plans, financial requirements projections and proposes a new structure of experiential marketing. A number of regional forces are identified that will impact tourism into the country including global, social and economic forces, emerging trends in visitor motivations and behavior, emerging forces in experiential marketing. A major component of the strategy identifies target markets for Kenya to commensurate with the level of resources that will be available for marketing and promotion, in keeping with the forces and trends identified and the nature of the Kenya tourism environment. The agreed upon target market segments are: generic/mass travel, experiential travel, creative travel, adventure seeking travel, senior/extended/long stay travel, and business related travel. The strategy phases the development of the target markets over the years of the marketing strategies in order to yield the best opportunity for results. A core activity in developing a marketing strategy is determining the nature of experiences Kenya offers in tourism. The strategy’s experience development process will continue to develop within the context of the products identified which will be promoted regionally: culture/heritage, nature, community-based. Each county in the country has a significant number of attractions and experiences and the challenge of the country is to bring these together in a creative and innovative way in order to encourage tourists to visit more than one county in Kenya.

Endemic pemphigus foliaceus (fogo selvagem) and pemphigus vulgaris: immunoglobulin G heterogeneity detected by indirect immunofluorescence

Pemphigus are autoimmune intraepidermal blistering diseases in which immunoglobulin G (IgG) autoantibodies are directed against desmosomal glycoproteins. The aim of this study was to determine the IgG subclass profile of endemic pemphigus foliaceus (fogo selvagem) and pemphigus vulgaris utilizing indirect immunofluorescence. PATIENTS AND METHODS: Twenty-five patients with pemphigus vulgaris, 25 with endemic pemphigus foliaceus (fogo selvagem), and 25 healthy controls were analyzed by indirect immunofluorescence for circulating autoantibodies (total IgG and its subclasses). RESULTS: Our data revealed a significant correlation (P <.05) of disease activity and autoantibody levels in both forms of pemphigus, i.e., negative titers related to clinical remission, whereas positive results related to active disease. Immunoglobulin G subclass analysis in fogo selvagem demonstrated that in patients in remission, 56% showed positive immunoglobulin G4; in active disease, immunoglobulin G4 was the predominant subclass (100% positive in all cases). The IgG subclass profile in pemphigus vulgaris showed that in patients in remission, only 10% were positive for immunoglobulin G4; in active disease, positivity for immunoglobulin G4 was present in 78% to 88% of the cases. CONCLUSION: Subclass characterization of immunoglobulin G autoantibodies is a useful tool for pemphigus follow-up, since immunoglobulin G4 (IgG4) is the subclass that is closely related to recognition of pathogenic epitopes, and consequently with disease activity. Careful monitoring should be performed for fogo selvagem in clinical remission with a homogeneous IgG4 response, since this may indicate more frequent relapses.

A non-linear VAD for noisy environments

This paper deals with non-linear transformations for improving the performance of an entropy-based voice activity detector (VAD). The idea to use a non-linear transformation has already been applied in the field of speech linear prediction, or linear predictive coding (LPC), based on source separation techniques, where a score function is added to classical equations in order to take into account the true distribution of the signal. We explore the possibility of estimating the entropy of frames after calculating its score function, instead of using original frames. We observe that if the signal is clean, the estimated entropy is essentially the same; if the signal is noisy, however, the frames transformed using the score function may give entropy that is different in voiced frames as compared to nonvoiced ones. Experimental evidence is given to show that this fact enables voice activity detection under high noise, where the simple entropy method fails.

Tolerance and Relative Utility: Two Proposed Indices for Comparing Change in Clinical Measurement Noise Between Different Populations (Repeatability) or Measurement Methods (Agreement).

Reaching a consensus in terms of interchangeability and utility (i.e., disease detection/monitoring) of a medical device is the eventual aim of repeatability and agreement studies. The aim of the tolerance and relative utility indices described in this report is to provide a methodology to compare change in clinical measurement noise between different populations (repeatability) or measurement methods (agreement), so as to highlight problematic areas. No longitudinal data are required to calculate these indices. Both indices establish a metric of least to most effected across all parameters to facilitate comparison. If validated, these indices may prove useful tools when combining reports and forming the consensus required in the validation process for software updates and new medical devices.

Antioxidant dietary deficiency induces caspase activation in chick skeletal muscle cells

Apoptosis and necrosis are two distinct forms of cell death that can occur in response to different agents and stress conditions. In order to verify if the oxidative stress induced by dietary selenium and vitamin E deficiencies can lead muscle cells to apoptosis, one-day-old chicks were reared using diets differing in their vitamin E (0 or 10 IU/kg) and selenium (0 or 0.15 ppm) supplementation. Chick skeletal muscle tissue was obtained from 28-day-old animals and used to verify apoptosis occurrence based on caspase activity detection and DNA fragmentation. Antioxidant deficiency significantly increased caspase-like activity assessed by the hydrolysis of fluorogenic peptide substrates (Abz-peptidyl-EDDnp) at lambdaexc = 320 nm and lambdaem = 420 nm. Proteolytic activation was not accompanied by typical internucleosomal DNA fragmentation detected by field inversion gel electrophoresis. Although the general caspase inhibitor N-benzyloxycarbonyl-Val-Ala-Asp(O-Me) fluoromethyl ketone (Z-VAD-fmk) (0 to 80 muM) did not block caspase-like activity when preincubated for 30 min with muscle homogenates, the hydrolyzed substrates presented the same cleavage profile in HPLC (at the aspartic acid residue) when incubated with the purified recombinant enzyme caspase-3. These data indicate that oxidative stress causes caspase-like activation in muscle cells and suggest that cell death associated with exudative diathesis (dietary deficiency of selenium and vitamin E) can follow the apoptotic pathway.

Methylmercury intoxication activates nitric oxide synthase in chick retinal cell culture

The visual system is a potential target for methylmercury (MeHg) intoxication. Nevertheless, there are few studies about the cellular mechanisms of toxicity induced by MeHg in retinal cells. Various reports have indicated a critical role for nitric oxide synthase (NOS) activation in modulating MeHg neurotoxicity in cerebellar and cortical regions. The aim of the present study is to describe the effects of MeHg on cell viability and NOS activation in chick retinal cell cultures. For this purpose, primary cultures were prepared from 7-day-old chick embryos: retinas were aseptically dissected and dissociated and cells were grown at 37ºC for 7-8 days. Cultures were exposed to MeHg (10 µM, 100 µM, and 1 mM) for 2, 4, and 6 h. Cell viability was measured by MTT method and NOS activity by monitoring the conversion of L-[H³]-arginine to L-[H³]-citrulline. The incubation of cultured retina cells with 10 and 100 µM MeHg promoted an increase of NOS activity compared to control (P < 0.05). Maximum values (P < 0.05) were reached after 4 h of MeHg incubation: increases of 81.6 ± 5.3 and 91.3 ± 3.7%, respectively (data are reported as mean ± SEM for 4 replicates). MeHg also promoted a concentration- and time-dependent decrease in cell viability, with the highest toxicity (a reduction of about 80% in cell viability) being observed at the concentration of 1 mM and after 4-6 h of incubation. The present study demonstrates for the first time the modulation of MeHg neurotoxicity in retinal cells by the nitrergic system.

Étude de l’impact de la charge de travail sur les indicateurs biologiques d’exposition de l’acétone et du styrène par la modélisation toxicocinétique

L’effort physique a été reconnu comme l’un des déterminants majeurs qui affecte l’absorption pulmonaire et la cinétique des solvants industriels, composés volatils très répandus dans le milieu de travail. L’objectif global de ce projet était de caractériser la relation entre divers niveaux de charge de travail et les concentrations biologiques de l’acétone et du styrène ou de ses métabolites utilisés comme des indicateurs biologiques de l’exposition (IBEs) à ces solvants. Des modèles pharmacocinétiques à base physiologique ont été développés et validés afin de reproduire une exposition professionnelle à l’acétone et au styrène, individuellement et en combinaison, durant une semaine complète de travail (8h/jour, 5 jours). Les simulations ont été effectuées suivant une exposition aux valeurs limite d’exposition (500 ppm et 20 ppm, respectivement) et à des charges de travail de 12,5 W (repos), 25 W et 50 W. Les valeurs prédites par les modèles ont été comparées aux valeurs de référence des IBEs actuels. Le niveau d’acétone dans l’urine obtenu à la fin du dernier quart de travail était 3,5 fois supérieur à la valeur au repos (28 mg/L) pour un effort de 50 W, tandis que les niveaux de styrène dans le sang veineux et de ses métabolites dans l’urine ont augmenté d’un facteur d’environ 3,0 en comparaison avec les valeurs au repos, respectivement de 0,17 mg/L et 144 mg/g créatinine. Pour une co-exposition à des concentrations de 20 ppm de styrène et 200 ppm d’acétone et à une activité physique de 50 W, les simulations ont montré une augmentation de 10% du styrène sanguin et une faible diminution de ses métabolites dans l’urine. Les valeurs simulées par les modèles pour l’acétone ou le styrène montrent que des travailleurs dont la charge de travail équivaut à plus de 25 W sont susceptibles d’avoir des concentrations internes pouvant dépasser les valeurs de référence des IBEs respectifs de ces solvants et peuvent être à risque. Les résultats soulignent ainsi l’importance de tenir compte de la charge de travail dans la détermination d’une valeur de référence pour la surveillance biologique de l’acétone et du styrène.