A Generic Software Architecture for a Domain Specific Distributed Embedded System

In this paper, we have evolved a generic software architecture for a domain specific distributed embedded system. The system under consideration belongs to the Command, Control and Communication systems domain. The systems in such domain have very long operational lifetime. The quality attributes of these systems are equally important as the functional requirements. The main guiding principle followed in this paper for evolving the software architecture has been functional independence of the modules. The quality attributes considered most important for the system are maintainability and modifiability. Architectural styles best suited for the functionally independent modules are proposed with focus on these quality attributes. The software architecture for the system is envisioned as a collection of architecture styles of the functionally independent modules identified

Design of a distributed power system stabiliser

A new design method for a distributed power system stabiliser for interconnected power systems is introduced in this paper. The stabiliser is of a low order, dynamic and robust. To generate the required local control signals, each local stabiliser requires information about either the rotor speed or the load angle of the other subsystems. A simple MATLAB based design algorithm is given and used on a three-machine unstable power system. The resulting stabiliser is simulated and sample results are presented.

Design of a distributed power system stabiliser

A new design method for a distributed power system stabiliser for interconnected power systems is introduced in this paper. The stabiliser is of a low order, dynamic and robust. To generate the required local control signals, each local stabiliser requires information about either the rotor speed or the load angle of the other subsystems. A simple MATLAB based design algorithm is given and used on a three-machine unstable power system. The resulting stabiliser is simulated and sample results are presented.

Multi-core security defense system (MSDS)

Today's security program developers are not only facing an uphill battle of developing and implementing. But now have to take into consideration, the emergence of next generation of multi-core system, and its effect on security application design. In our previous work, we developed a framework called bodyguard. The objective of this framework was to help security software developers, shift from their use of serialized paradigm, to a multi-core paradigm. Working within this paradigm, we developed a security bodyguard system called Farmer. This abstract framework placed particular applications into categories, like security or multi-media, which were ran on separate core processors within the multi-core system. With further analysis of the bodyguard paradigm, we found that this paradigm was suitable to be used in other computer science areas, such as spam filtering and multi-media. In this paper, we update our research work within the bodyguard paradigm, and showed a marked improvement of 110% speedup performance with an average cost of 1.5 ms.

Programmer friendly and efficient distributed shared memory integrated into a distributed operating system

Distributed Shared Memory (DSM) provides programmers with a shared memory environment in systems where memory is not physically shared. Clusters of Workstations (COWs), an often untapped source of computing power, are characterised by a very low cost/performance ratio. The combination of Clusters of Workstations (COWs) with DSM provides an environment in which the programmer can use the well known approaches and methods of programming for physically shared memory systems and parallel processing can be carried out to make full use of the computing power and cost advantages of the COW. The aim of this research is to synthesise and develop a distributed shared memory system as an integral part of an operating system in order to provide application programmers with a convenient environment in which the development and execution of parallel applications can be done easily and efficiently, and which does this in a transparent manner. Furthermore, in order to satisfy our challenging design requirements we want to demonstrate that the operating system into which the DSM system is integrated should be a distributed operating system. In this thesis a study into the synthesis of a DSM system within a microkernel and client-server based distributed operating system which uses both strict and weak consistency models, with a write-invalidate and write-update based approach for consistency maintenance is reported. Furthermore a unique automatic initialisation system which allows the programmer to start the parallel execution of a group of processes with a single library call is reported. The number and location of these processes are determined by the operating system based on system load information. The DSM system proposed has a novel approach in that it provides programmers with a complete programming environment in which they are easily able to develop and run their code or indeed run existing shared memory code. A set of demanding DSM system design requirements are presented and the incentives for the placement of the DSM system with a distributed operating system and in particular in the memory management server have been reported. The new DSM system concentrated on an event-driven set of cooperating and distributed entities, and a detailed description of the events and reactions to these events that make up the operation of the DSM system is then presented. This is followed by a pseudocode form of the detailed design of the main modules and activities of the primitives used in the proposed DSM system. Quantitative results of performance tests and qualitative results showing the ease of programming and use of the RHODOS DSM system are reported. A study of five different application is given and the results of tests carried out on these applications together with a discussion of the results are given. A discussion of how RHODOS’ DSM allows programmers to write shared memory code in an easy to use and familiar environment and a comparative evaluation of RHODOS DSM with other DSM systems is presented. In particular, the ease of use and transparency of the DSM system have been demonstrated through the description of the ease with which a moderately inexperienced undergraduate programmer was able to convert, write and run applications for the testing of the DSM system. Furthermore, the description of the tests performed using physically shared memory shows that the latter is indistinguishable from distributed shared memory; this is further evidence that the DSM system is fully transparent. This study clearly demonstrates that the aim of the research has been achieved; it is possible to develop a programmer friendly and efficient DSM system fully integrated within a distributed operating system. It is clear from this research that client-server and microkernel based distributed operating system integrated DSM makes shared memory operations transparent and almost completely removes the involvement of the programmer beyond classical activities needed to deal with shared memory. The conclusion can be drawn that DSM, when implemented within a client-server and microkernel based distributed operating system, is one of the most encouraging approaches to parallel processing since it guarantees performance improvements with minimal programmer involvement.

Information provenance for open distributed collaborative system

In autonomously managed distributed systems for collaboration, provenance can facilitate reuse of information that are interchanged, repetition of successful experiments, or to provide evidence for trust mechanisms that certain information existed at a certain period during collaboration. In this paper, we propose domain independent information provenance architecture for open collaborative distributed systems. The proposed system uses XML for interchanging information and RDF to track information provenance. The use of XML and RDF also ensures that information is universally acceptable even among heterogeneous nodes. Our proposed information provenance model can work on any operating systems or workflows.

Viral RNA silencing suppressors (RSS) : novel strategy of viruses to ablate the host RNA interference (RNAi) defense system

Pathogenic viruses have developed a molecular defense arsenal for their survival by counteracting the host anti-viral system known as RNA interference (RNAi). Cellular RNAi, in addition to regulating gene expression through microRNAs, also serves as a barrier against invasive foreign nucleic acids. RNAi is conserved across the biological species, including plants, animals and invertebrates. Viruses in turn, have evolved mechanisms that can counteract this anti-viral defense of the host. Recent studies of mammalian viruses exhibiting RNA silencing suppressor (RSS) activity have further advanced our understanding of RNAi in terms of host–virus interactions. Viral proteins and non-coding viral RNAs can inhibit the RNAi (miRNA/siRNA) pathway through different mechanisms. Mammalian viruses having dsRNA-binding regions and GW/WG motifs appear to have a high chance of conferring RSS activity. Although, RSSs of plant and invertebrate viruses have been well characterized, mammalian viral RSSs still need in-depth investigations to present the concrete evidences supporting their RNAi ablation characteristics. The information presented in this review together with any perspective research should help to predict and identify the RSS activity-endowed new viral proteins that could be the potential targets for designing novel anti-viral therapeutics.

Experiences gained from building a services-based distributed operating system

The goal of this paper is to present the experiences gained over 15 years of research into the design and development of a services-based distributed operating system. The lessons learnt over this period, we hope, will be of value to researchers involved in the design and development of operating systems that wish to harness the collective resources of ever-expanding distributed systems.

Effects of omega-3 PUFA on the vitamin E and glutathione antioxidant defense system in individuals at ultra-high risk of psychosis

BACKGROUND: Oxidative stress and impaired antioxidant defenses are reported in schizophrenia and are associated with disturbed neurodevelopment, brain structural alterations, glutamatergic imbalance, increased negative symptoms, and cognitive impairment. There is evidence that oxidative stress predates the onset of acute psychotic illness. Here, we investigate the effects of omega-3 PUFA on the vitamin E and glutathione antioxidant defense system (AODS). METHOD: In 64 help-seeking UHR-individuals (13-25 years of age), vitamin E levels and glutathione were investigated before and after 12 weeks of treatment with either 1.2g/d omega-3 (PUFA-E) or saturated fatty acids (SFA-E), with each condition also containing 30.4mg/d alpha-tocopherol to ensure absorption without additional oxidative risk. RESULTS: In multivariate tests, the effects on the AODS (alpha-tocopherol, total glutathione) were not significantly different (p=0.13, p=0.11, respectively) between treatment conditions. According to univariate findings, only PUFA-E caused a significant alpha-tocopherol increase, while PUFA-E and SFA-E caused a significant gamma- and delta-tocopherol decrease. Total glutathione (GSHt) was decreased by PUFA-E supplementation. CONCLUSION: Effects of the PUFA-E condition on the vitamin E and glutathione AODS could be mechanisms underlying its clinical effectiveness. In terms of the vitamin E protection system, PUFA-E seems to directly support the antioxidative defense at membrane level. The effect of PUFA-E on GSHt is not yet fully understood, but could reflect antioxidative effects, resulting in decreased demand for glutathione. It is still necessary to further clarify which type of PUFA/antioxidant combination, and in which dose, is effective at each stage of psychotic illness.

Development of CAN-based distributed control system for variable rate technology in agricultural machinery

The number of electronic devices connected to agricultural machinery is increasing to support new agricultural practices tasks related to the Precision Agriculture such as spatial variability mapping and Variable Rate Technology (VRT). The Distributed Control System (DCS) is a suitable solution for decentralization of the data acquisition system and the Controller Area Network (CAN) is the major trend among the embedded communications protocols for agricultural machinery and vehicles. The application of soil correctives is a typical problem in Brazil. The efficiency of this correction process is highly dependent of the inputs way at soil and the occurrence of errors affects directly the agricultural yield. To handle this problem, this paper presents the development of a CAN-based distributed control system for a VRT system of soil corrective in agricultural machinery. The VRT system is composed by a tractor-implement that applies a desired rate of inputs according to the georeferenced prescription map of the farm field to support PA (Precision Agriculture). The performance evaluation of the CAN-based VRT system was done by experimental tests and analyzing the CAN messages transmitted in the operation of the entire system. The results of the control error according to the necessity of agricultural application allow conclude that the developed VRT system is suitable for the agricultural productions reaching an acceptable response time and application error. The CAN-Based DCS solution applied in the VRT system reduced the complexity of the control system, easing the installation and maintenance. The use of VRT system allowed applying only the required inputs, increasing the efficiency operation and minimizing the environmental impact.

Development and characterization of a distributed measurement system for the evaluation of voltage quality in electric power networks

The research activity carried out during the PhD course in Electrical Engineering belongs to the branch of electric and electronic measurements. The main subject of the present thesis is a distributed measurement system to be installed in Medium Voltage power networks, as well as the method developed to analyze data acquired by the measurement system itself and to monitor power quality. In chapter 2 the increasing interest towards power quality in electrical systems is illustrated, by reporting the international research activity inherent to the problem and the relevant standards and guidelines emitted. The aspect of the quality of voltage provided by utilities and influenced by customers in the various points of a network came out only in recent years, in particular as a consequence of the energy market liberalization. Usually, the concept of quality of the delivered energy has been associated mostly to its continuity. Hence the reliability was the main characteristic to be ensured for power systems. Nowadays, the number and duration of interruptions are the “quality indicators” commonly perceived by most customers; for this reason, a short section is dedicated also to network reliability and its regulation. In this contest it should be noted that although the measurement system developed during the research activity belongs to the field of power quality evaluation systems, the information registered in real time by its remote stations can be used to improve the system reliability too. Given the vast scenario of power quality degrading phenomena that usually can occur in distribution networks, the study has been focused on electromagnetic transients affecting line voltages. The outcome of such a study has been the design and realization of a distributed measurement system which continuously monitor the phase signals in different points of a network, detect the occurrence of transients superposed to the fundamental steady state component and register the time of occurrence of such events. The data set is finally used to locate the source of the transient disturbance propagating along the network lines. Most of the oscillatory transients affecting line voltages are due to faults occurring in any point of the distribution system and have to be seen before protection equipment intervention. An important conclusion is that the method can improve the monitored network reliability, since the knowledge of the location of a fault allows the energy manager to reduce as much as possible both the area of the network to be disconnected for protection purposes and the time spent by technical staff to recover the abnormal condition and/or the damage. The part of the thesis presenting the results of such a study and activity is structured as follows: chapter 3 deals with the propagation of electromagnetic transients in power systems by defining characteristics and causes of the phenomena and briefly reporting the theory and approaches used to study transients propagation. Then the state of the art concerning methods to detect and locate faults in distribution networks is presented. Finally the attention is paid on the particular technique adopted for the same purpose during the thesis, and the methods developed on the basis of such approach. Chapter 4 reports the configuration of the distribution networks on which the fault location method has been applied by means of simulations as well as the results obtained case by case. In this way the performance featured by the location procedure firstly in ideal then in realistic operating conditions are tested. In chapter 5 the measurement system designed to implement the transients detection and fault location method is presented. The hardware belonging to the measurement chain of every acquisition channel in remote stations is described. Then, the global measurement system is characterized by considering the non ideal aspects of each device that can concur to the final combined uncertainty on the estimated position of the fault in the network under test. Finally, such parameter is computed according to the Guide to the Expression of Uncertainty in Measurements, by means of a numeric procedure. In the last chapter a device is described that has been designed and realized during the PhD activity aiming at substituting the commercial capacitive voltage divider belonging to the conditioning block of the measurement chain. Such a study has been carried out aiming at providing an alternative to the used transducer that could feature equivalent performance and lower cost. In this way, the economical impact of the investment associated to the whole measurement system would be significantly reduced, making the method application much more feasible.

Performance studies of the CMS distributed analysis system in the associated Higgs boson production with top quarks

L'obiettivo di questa tesi è studiare la fattibilità dello studio della produzione associata ttH del bosone di Higgs con due quark top nell'esperimento CMS, e valutare le funzionalità e le caratteristiche della prossima generazione di toolkit per l'analisi distribuita a CMS (CRAB versione 3) per effettuare tale analisi. Nel settore della fisica del quark top, la produzione ttH è particolarmente interessante, soprattutto perchè rappresenta l'unica opportunità di studiare direttamente il vertice t-H senza dover fare assunzioni riguardanti possibili contributi dalla fisica oltre il Modello Standard. La preparazione per questa analisi è cruciale in questo momento, prima dell'inizio del Run-2 dell'LHC nel 2015. Per essere preparati a tale studio, le implicazioni tecniche di effettuare un'analisi completa in un ambito di calcolo distribuito come la Grid non dovrebbero essere sottovalutate. Per questo motivo, vengono presentati e discussi un'analisi dello stesso strumento CRAB3 (disponibile adesso in versione di pre-produzione) e un confronto diretto di prestazioni con CRAB2. Saranno raccolti e documentati inoltre suggerimenti e consigli per un team di analisi che sarà eventualmente coinvolto in questo studio. Nel Capitolo 1 è introdotta la fisica delle alte energie a LHC nell'esperimento CMS. Il Capitolo 2 discute il modello di calcolo di CMS e il sistema di analisi distribuita della Grid. Nel Capitolo 3 viene brevemente presentata la fisica del quark top e del bosone di Higgs. Il Capitolo 4 è dedicato alla preparazione dell'analisi dal punto di vista degli strumenti della Grid (CRAB3 vs CRAB2). Nel capitolo 5 è presentato e discusso uno studio di fattibilità per un'analisi del canale ttH in termini di efficienza di selezione.

BitWorker, a Decentralized Distributed Computing System based on BitTorrent

In this paper we present BitWorker, a platform for community distributed computing based on BitTorrent. Any splittable task can be easily specified by a user in a meta-information task file, such that it can be downloaded and performed by other volunteers. Peers find each other using Distributed Hash Tables, download existing results, and compute missing ones. Unlike existing distributed computing schemes relying on centralized coordination point(s), our scheme is totally distributed, therefore, highly robust. We evaluate the performance of BitWorker using mathematical models and real tests, showing processing and robustness gains. BitWorker is available for download and use by the community.

Performance metrics for small-signal stability assessment of DC-distributed power-system-architecture comparisons

The objective of this paper is to provide performance metrics for small-signal stability assessment of a given system architecture. The stability margins are stated utilizing a concept of maximum peak criteria (MPC) derived from the behavior of an impedance-based sensitivity function. For each minor-loop gain defined at every system interface, a single number to state the robustness of stability is provided based on the computed maximum value of the corresponding sensitivity function. In order to compare various power-architecture solutions in terms of stability, a parameter providing an overall measure of the whole system stability is required. The selected figure of merit is geometric average of each maximum peak value within the system. It provides a meaningful metrics for system comparisons: the best system in terms of robust stability is the one that minimizes this index. In addition, the largest peak value within the system interfaces is given thus detecting the weakest point of the system in terms of robustness.

Systematic Method to Assess Small-Signal Stability of DC-Distributed Power-System-Architecture

The objective of this paper is to present a simplified method to analyze small-signal stability of a power system and provide performance metrics for stability assessment of a given power-system-architecture. The stability margins are stated utilizing a concept of maximum peak criteria (MPC), derived from the behavior of an impedance-based sensitivity function that provides a single number to state the robustness of the stability of a well-defined minor-loop gain. For each minor-loop gain, defined at every system interface, the robustness of the stability is provided as a maximum value of the corresponding sensitivity function. Typically power systems comprise of various interfaces and, therefore, in order to compare different architecture solutions in terms of stability, a single number providing an overall measure of the whole system stability is required. The selected figure of merit is geometric average of each maximum peak value within the system, combined with the worst case value of system interfaces.