Directed-spray application of paraquat and diuron in physic nut plants

There is little information about the selectivity of herbicides in physic nut (Jatropha curcas) in Brazil. Therefore, this study aimed to evaluate the selectivity of different doses and mixtures of paraquat and diuron in direted-spray applications in physic nut plants in greenhouse conditions. The study used a randomized block design, with five replicates. The treatments were: paraquat (200 and 600 g ha-1), diuron (1,000 and 2,000 g ha-1), paraquat + diuron (200 + 1,000 g ha-1), paraquat + diuron (200 + 2,000 g ha-1), paraquat + diuron (600 + 1,000 g ha-1), paraquat + diuron (600 + 2,000 g ha-1) and a control (no application). Directed-spray application was performed at 70 days after sowing by the lower third of the plants. The treatments of diuron and paraquat + diuron mixtures affected the growth and photosynthetic activity of physic nut plants, injuries being more pronounced at doses of diuron of 2,000 g ha‑1, while the isolated application of paraquat at doses of 200 and 600 g ha-1 showed good selectivity potential for physic nut plants.

Manejo de plantas daninhas em soja geneticamente modificada tolerante ao glyphosate

Os sistemas de produção transgênicos, assim como os convencionais, exigem, além do controle químico, a adoção de outras estratégias de manejo de plantas daninhas. Objetivou-se, com este trabalho, avaliar o controle químico de plantas daninhas, em soja geneticamente modificada (transgênica) tolerante ao herbicida glyphosate associado a coberturas vegetais, na entressafra. O experimento foi instalado em área experimental da FCAV/Unesp, Jaboticabal (SP). O delineamento experimental foi o de blocos ao acaso, em esquema de parcelas subdivididas, com quatro repetições. Nas parcelas, foram avaliadas as coberturas vegetais de Brachiaria brizantha (braquiarão cv. Marandu), Pennisetum americanum (milheto forrageiro cv. BN2) e vegetação espontânea, e, nas subparcelas, os herbicidas glyphosate, chlorimuron - ethyl + lactofen em mistura e fluazifop-p-butyl em aplicação sequencial, além de duas testemunhas sem aplicação. A cobertura com braquiarão contribuiu para o controle químico, exercendo supressão das plantas daninhas. A aplicação única de 720 g e.a. ha-1de glyphosate, independentemente da cobertura vegetal utilizada na entressafra, foi suficiente para o controle adequado de Acanthospermum hispidum, Alternanthera tenella, Amaranthus sp., Bidens pilosa, Xanthium strumarium, Cenchrus echinatus, Digitaria sp. e Eleusine indica, com resultados similares ao tratamento (chlorimuron-ethyl + lactofen) + fluazifop-p-buthyl. Comparados à testemunha capinada, os herbicidas testados não afetaram a altura das plantas, massa seca da parte aérea, massa de 100 grãos e a produtividade de grãos. As plantas de soja crescidas sobre os resíduos vegetais de braquiarão e milheto forrageiro apresentaram maior altura, porém, nenhuma outra característica avaliada na cultura foi influenciada pelas coberturas.

Alterações anatômicas foliares em plantas de Brachiaria subquadripara submetidas à aplicação de herbicidas

O presente trabalho teve por objetivo avaliar a eficiência do controle dos herbicidas diquat, glyphosate e imazapyr e as alterações anatômicas do limbo foliar provocadas por eles em plantas de Brachiaria subquadripara. As plantas foram cultivadas em caixas-d'água sob condições de campo e, quando atingiram estádio de pleno desenvolvimento vegetativo, foram pulverizadas com soluções de diquat a 400 g ha-1, glyphosate a 4.320 g ha-1 em associação com o adjuvante Aterbane a 0,5% v v-1 e imazapyr a 750 g ha-1. Além disso, utilizou-se uma testemunha sem aplicação de herbicida. Foram realizadas avaliações de controle e das seguintes características anatômicas quantitativas das regiões da nervura central e da internervural do limbo foliar, além da região do colmo: porcentagem da epiderme adaxial e abaxial, porcentagem da endoderme, porcentagem do feixe vascular, porcentagem de lacunas do aerênquima, porcentagem de parênquima, espessura foliar, porcentagem da epiderme do colmo, porcentagem do câmbio vascular e diâmetro do colmo. Os herbicidas diquat e imazapyr promoveram o maior número de alterações nos caracteres anatômicos quantitativos das regiões da nervura central e internervural do limbo foliar e da região do colmo das plantas. Contudo, com exceção do diquat, os herbicidas foram eficientes no controle das plantas de B. subquadripara, porém todos eles permitiram a rebrota delas.

Alterações anatômicas foliares em Eichhornia crassipes submetidas à aplicação de herbicidas

O presente trabalho teve por objetivo avaliar a eficiência do controle dos herbicidas 2,4-D, diquat e glyphosate e as alterações anatômicas do limbo foliar provocadas pelos produtos em plantas de Eichhornia crassipes, coletadas nos reservatórios do complexo CESP. As plantas foram cultivadas em caixas-d'água sob condições de campo e, quando atingiram estádio de pleno desenvolvimento vegetativo, foram pulverizadas com soluções de diquat a 400 g i.a.ha-1, 2,4-D a 1.340 g e.a. ha-1 e glyphosate a 4.320 g e.a. ha-1 em associação com o adjuvante Silwet L-77 a 0,01% v v-1. Foi utilizada uma testemunha sem aplicação de herbicida. A seguir, foram realizadas avaliações de controle e das seguintes características anatômicas quantitativas das regiões da nervura central e da internervural do limbo foliar: porcentagem da epiderme adaxial e abaxial, porcentagem da endoderme, porcentagem do feixe vascular, porcentagem de lacunas do aerênquima, porcentagem de parênquima e espessura foliar (µm). Com base nos resultados, os principais caracteres anatômicos quantitativos das regiões da nervura central e internervural do limbo foliar que sofreram alterações após a aplicação dos herbicidas foram a porcentagem da epiderme adaxial, a porcentagem da endoderme e a espessura foliar. Os herbicidas diquat e 2,4-D foram os que mais promoveram alterações nos caracteres anatômicos quantitativos das regiões da nervura central e internervural do limbo foliar das plantas de E. crassipes. Apenas o glyphosate apresentou controle de 100% das plantas aos 22 dias após a aplicação, quando comparado com o observado na testemunha sem herbicida.

Alterações anatômicas do limbo foliar de plantas de Polygonum lapathifolium submetidas à aplicação de herbicidas

O presente trabalho teve por objetivo avaliar a eficiência do controle dos herbicidas 2,4-D, diquat e glyphosate e as alterações anatômicas do limbo foliar provocadas por eles em plantas de Polygonum lapathifolium. As plantas foram cultivadas em caixas-d'água sob condições de campo e, quando atingiram seu pleno desenvolvimento (antes do florescimento), pulverizadas com os herbicidas. Avaliaram-se quantitativamente as seguintes características anatômicas da nervura central e internervural das folhas: porcentagem da epiderme adaxial e abaxial, porcentagem da bainha do feixe, porcentagem do feixe vascular, porcentagem de esclerênquima e colênquima, porcentagem de parênquima paliçádico e lacunoso, bem como a espessura foliar (μm). Os tratamentos químicos foram: diquat (400 g i.a. ha-1 do produto comercial Reward), 2,4-D (1.340 g e.a. ha -1 do produto comercial DMA 806 BR) e glyphosate (4.320 g e.a. ha-1 do produto comercial Rodeo) com a adição do surfatante Silwet L-77 a 0,01% v v-1. Os principais caracteres anatômicos quantitativos da região da nervura central do limbo foliar que sofreram alterações após a aplicação dos herbicidas foram a porcentagem da epiderme adaxial, a porcentagem de feixe vascular, a porcentagem de colênquima, a porcentagem de parênquima paliçádico e lacunoso e a espessura foliar. Para a região internervural do limbo foliar, os principais caracteres anatômicos quantitativos que sofreram alterações após a aplicação dos herbicidas foram a porcentagem da epiderme adaxial, a porcentagem da bainha do feixe e a espessura foliar. Os herbicidas diquat e 2,4-D foram ineficientes no controle das plantas de P. lapathifolium; o glyphosate apresentou controle superior a 90% das plantas aos 100 dias após a aplicação. Entretanto, todos os herbicidas permitiram rebrota das plantas.

Diquat no manejo de aguapé Eichhornia crassipes (Mart.) Solms e seu impacto sobre fatores limnológicos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effects of Different Periods of Clomazone plus Hexazinona Permanence in Soil and Sugarcane Mulch before the Occurrence of Rain on Weed Control Efficacy

The objective of this work was to evaluate the efficacy of the formulated mixture clomazone and hexazinone applied in soil or combined with sugarcane mulch, after different periods of permanence without the occurrence of rain. The experiment was carried out in vases under greenhouse conditions in Botucatu, São Paulo, Brazil. The weeds Brachiaria decumbens, Ipomoea grandifolia, Ipomoea hederifolia and Euphorbia heterophylla were sown and covered or not with sugarcane mulch. The experiment was arranged in a complete randomized design with four repetitions. The treatments were displaced in a 3x6 factorial scheme, with the factors being six periods without rain (0, 3, 7, 15, 30, and 60 days) and three modes of herbicide application(on the soil without sugarcane mulch, on and under sugarcane mulch). Control evaluations were carried out at 10, 21, 35 and 42 days after the occurrence of rain. The clomazone + hexazinone mixture promoted an excellent weed control for all the species studied when applied on, under, or without sugarcane mulch. However, the control levels tended to reduce for periods over 60 days without rain.

Decision criteria for optimizing postemergence johnsongrass control in soybean crops in Argentina

Field studies were established in Zavalla and Oliveros, Argentina, during four years in order to optimize Johnsongrass (Sorghum halepense (L.) Pers.) chemical control by means of the thermal calendar model in comparison with other criteria (weed height or days after sowing). The effect of three application dates of postemergence herbicides was determined by visual control, density of tillers originated from rhizome bud regrowth, and from crown and shoot bud regrowth, and soybean yield. Following the thermal calendar model criterion, applications during the second date afforded the best control. Weed height for the first date showed little variability between experiments but was highly variable in the second and third application dates, achieving in some cases values greater than 120 cm. For all years, no significant differences were detected for crop yield between the first and second application dates, and yields were always lower for the third date. The greatest rhizome bud regrowth was observed for the earliest application date and the highest crown and shoot bud regrowth was determined for the last application date. Parameters associated with control efficiency showed the best behaviour for the second date. However, plant height at this moment may interfere with herbicide application and the variability exhibited by this parameter highlights the risk of determining control timing using only one decision criterion.

Herbicide efficacy on Borreria densiflora control in pre- and post-emergence conditions

The weed Borreria densiflora is a management issue in soybean and sugarcane crops from North and Northeastern Brazil. Knowledge upon chemical control of B. densiflora contributes to the integrated management of this weed species, especially when active ingredient options become reduced due to the selection of herbicide resistant or tolerant weed species. Experiments in pre- and post-emergence of B. densiflora were conducted in greenhouse, in a randomized block design and four replications. In pre-emergence, the dose-response curve methodology was used and 7 herbicides were tested. In post-emergence, 9 herbicides at the recommended rate and 4 herbicide mixtures were tested. For pre and post-emergence conditions, evaluations were conducted at 60 and 21 days after treatment (DAT), respectively, and the variables analyzed were weed control and dry weight (%). The results showed options of pre-emergent herbicides that can be used for controlling B. densiflora, especially in sugarcane, where chemical weed control is mainly based on pre-emergent applications. In the current glyphosate resistance scenario, one should consider the use of pre-emergent herbicides within an integrated management of B. densiflora. For satisfactory post-emergence control, B. densiflora plants should be sprayed at the phenological stage of up to three pairs of leaves. Herbicide mixtures have been and will continue to be an important tool in chemical weed management, broadening the spectrum of weed control, while diversifying herbicide mechanisms of action, which helps to prevent or delay the appearance of herbicide resistance.

Noxious Weed Management: A Review of Herbicide Use at Colorado State Parks

Weed control in recreation areas is a complex public land management issue. Colorado State Parks are managed for both recreation and conservation, which often conflict. Noxious weeds affect both recreation and conservation efforts, and Parks often use herbicides to control these weeds. While herbicides are effective, they can be harmful to the environment and human health. Herbicide use at State Parks was reviewed to determine if chemical control is effective, safe, and efficient. The results revealed that many Parks are not using effective herbicides to treat noxious weeds and that some weed management plans lack pertinent information on chemical control. The results and recommendations provided can be used to improve the success of noxious weed control and create healthier Parks.

Genetic Control of Mosquitoes: population suppression strategies

Over the last two decades, morbidity and mortality from malaria and dengue fever among other pathogens are an increasing Public Health problem. The increase in the geographic distribution of vectors is accompanied by the emergence of viruses and diseases in new areas. There are insufficient specific therapeutic drugs available and there are no reliable vaccines for malaria or dengue, although some progress has been achieved, there is still a long way between its development and actual field use. Most mosquito control measures have failed to achieve their goals, mostly because of the mosquito's great reproductive capacity and genomic flexibility. Chemical control is increasingly restricted due to potential human toxicity, mortality in no target organisms, insecticide resistance, and other environmental impacts. Other strategies for mosquito control are desperately needed. The Sterile Insect Technique (SIT) is a species-specific and environmentally benign method for insect population suppression, it is based on mass rearing, radiation mediated sterilization, and release of a large number of male insects. Releasing of Insects carrying a dominant lethal gene (RIDL) offers a solution to many of the drawbacks of traditional SIT that have limited its application in mosquitoes while maintaining its environmentally friendly and species-specific utility. The self-limiting nature of sterile mosquitoes tends to make the issues related to field use of these somewhat less challenging than for self-spreading systems characteristic of population replacement strategies. They also are closer to field use, so might be appropriate to consider first. The prospect of genetic control methods against mosquito vectored human diseases is rapidly becoming a reality, many decisions will need to be made on a national, regional and international level regarding the biosafety, social, cultural and ethical aspects of the use and deployment of these vector control methods.

Potential for entomopathogenic fungi to control Triatoma dimidiata (Hemiptera: Reduviidae), a vector of Chagas disease in Mexico

Introduction The use of entomopathogenic fungi to control disease vectors has become relevant because traditional chemical control methods have caused damage to the environment and led to the development of resistance among vectors. Thus, this study assessed the pathogenicity of entomopathogenic fungi in Triatoma dimidiata. Methods Preparations of 108 conidia/ml of Gliocladium virens, Talaromyces flavus, Beauveria bassiana and Metarhizium anisopliae were applied topically on T. dimidiata nymphs and adults. Controls were treated with the 0.0001% Tween-80 vehicle. Mortality was evaluated and recorded daily for 30 days. The concentration required to kill 50% of T. dimidiata (LC50) was then calculated for the most pathogenic isolate. Results Pathogenicity in adults was similar among B. bassiana, G. virens and T. flavus (p>0.05) and differed from that in triatomine nymphs (p=0.009). The most entomopathogenic strains in adult triatomines were B. bassiana and G. virens, which both caused 100% mortality. In nymphs, the most entomopathogenic strain was B. bassiana, followed by G. virens. The native strain with the highest pathogenicity was G. virens, for which the LC50 for T. dimidiata nymphs was 1.98 x108 conidia/ml at 13 days after inoculation. Conclusions Beauveria bassiana and G. virens showed entomopathogenic potential in T. dimidiata nymphs and adults. However, the native G. virens strain presents a higher probability of success in the field, and G. virens should thus be considered a potential candidate for the biological control of triatomine Chagas disease vectors.

Tree and Brush Control For County Road Right-of-Way, Ocotober 2002

This manual summarizes the roadside tree and brush control methods used by all of Iowa's 99 counties. It is based on interviews conducted in Spring 2002 with county engineers, roadside managers and others. The target audience of this manual is the novice county engineer or roadside manager. Iowa law is nearly silent on roadside tree and brush control, so individual counties have been left to decide on the level of control they want to achieve and maintain. Different solutions have been developed but the goal of every county remains the same: to provide safe roads for the traveling public. Counties in eastern and southern Iowa appear to face the greatest brush control challenge. Most control efforts can be divided into two categories: mechanical and chemical. Mechanical control includes cutting tools and supporting equipment. A chain saw is the most widely used cutting tool. Tractor mounted boom mowers and brush cutters are used to prune miles of brush but have significant safety and aesthetic limitations and boom mowers are easily broken by inexperienced operators. The advent of tree shears and hydraulic thumbs offer unprecedented versatility. Bulldozers are often considered a method of last resort since they reduce large areas to bare ground. Any chipper that violently grabs brush should not be used. Chemical control is the application of herbicide to different parts of a plant: foliar spray is applied to leaves; basal bark spray is applied to the tree trunk; a cut stump treatment is applied to the cambium ring of a cut surface. There is reluctance by many to apply herbicide into the air due to drift concerns. One-third of Iowa counties do not use foliar spray. By contrast, several accepted control methods are directed toward the ground. Freshly cut stumps should be treated to prevent resprouting. Basal bark spray is highly effective in sensitive areas such as near houses. Interest in chemical control is slowly increasing as herbicides and application methods are refined. Fall burning, a third, distinctly separate technique is underused as a brush control method and can be effective if timed correctly. In all, control methods tend to reflect agricultural patterns in a county. The use of chain saws and foliar sprays tends to increase in counties where row crops predominate, and boom mowing tends to increase in counties where grassland predominates. For counties with light to moderate roadside brush, rotational maintenance is the key to effective control. The most comprehensive approach to control is to implement an integrated roadside vegetation management (IRVM) program. An IRVM program is usually directed by a Roadside Manager whose duties may be shared with another position. Funding for control programs comes from the Rural Services Basic portion of a county's budget. The average annual county brush control budget is about $76,000. That figure is thought not to include shared expenses such as fuel and buildings. Start up costs for an IRVM program are less if an existing control program is converted. In addition, IRVM budgets from three different northeastern Iowa counties are offered for comparison in this manual. The manual also includes a chapter on temporary traffic control in rural work zones, a summary of the Iowa Code as it relates to brush control, and rules on avoiding seasonal disturbance of the endangered Indiana bat. Appendices summarize survey and forest cover data, an equipment inventory, sample forms for record keeping, a sample brush control policy, a few legal opinions, a literature search, and a glossary.

Cultivar response to fungicide application in relation to rice blast control, productivity and sustainability

Four field trials were conducted, from 1995 to 1997, with the objective of studying the response of four upland cultivars to foliar fungicide application in relation to panicle blast control, grain yield and sustainability. Differential disease control and yield response of cultivars to fungicide treatment were obtained. Losses in grain yield of cultivars IAC 202, Caiapó, Rio Paranaíba and Araguaia due to panicle blast were 44.8%, 27.4%, 24.4% and 18.2%, respectively. Two applications of tricyclazole or benomyl controlled panicle blast, as indicated by lower values of disease progress curve and relative panicle blast severity, and increased grain yield of the cultivar IAC 202. The losses in 100 panicle grain weight and grain yield were significantly reduced by 22.3% and 25.1% in IAC 202 and 23.6% and 20.5% in Caiapó, respectively, with two sprays of tricyclazole. Sustainable value index for yield was maximum with two applications of tricyclazole (0.59), followed by one application at booting (0.46) and at heading (0.40) in cultivar IAC 202. Results showed no yield response of the cultivars Rio Paranaíba and Araguaia to fungicide applications for panicle blast control.

Occurence of thrips on Niagara table grape and its control with the insecticides thiacloprid and methiocarb associated with Metarhizium anisopliae

Thrips are reported as important pests on table grapes in United States and several countries of Europe. Damage caused by thrips, particulary Frankliniella occidentalis, was observed on niagara table grape crop in Limeira-SP, Brazil. During the blooming period, high thrips densities were observed feeding on pollen and small berries. The symptoms left were more visible after the development of the berries and were characterized by dark scars and suberized surface on berries, sometimes causing the berry to crack, and the seed to prolapse. The effect of insecticides thiacloprid or methiocarb, associated or not with the entomopathogenic fungus Metarhizium anisopliae were evaluated during the blooming period. For evaluation of thrips damage on fruits, the treatments were applied three additional times, 7, 14 and 21 days after the first application. The treatments were: a) M. anisopliae (strain 1037) 1x10(7) conidia/mL; b) thiacloprid 20mL/100L; c-d) methiocarb 100 and 150mL/100L; e) methiocarb 100mL/100L + M. anisopliae 1x10(7) conidia/mL. Only methiocarb, associated or not with the fungus, was effective in reducing thrips infestation, and no phytotoxic damage was observed. The efficiency of methiocarb 150mL/100L and the insecticide associated with the fungus for the control of the thrips population was 84.2 and 95.5%, respectively. In both cases, there was a reduction of approximately 70% in the number of berries with scars symptoms. For control of thrips on table grapes, chemical insecticides associated or not with M. anisopliae should be applied during the blooming period of the crop.